[kernel] refresh patches against 2.6.27 final

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12987 3c298f89-4303-0410-b956-a3cf2f4a3e73

16 files changed, 60 insertions, 60 deletions

diff --git a/target/linux/adm5120/patches-2.6.27/001-adm5120.patch b/target/linux/adm5120/patches-2.6.27/001-adm5120.patch
index 0c94ca288..5723e0a61 100644
--- a/target/linux/adm5120/patches-2.6.27/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.27/001-adm5120.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -19,6 +19,20 @@
+@@ -19,6 +19,20 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -21,7 +21,7 @@
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -598,6 +612,7 @@
+@@ -598,6 +612,7 @@ config WR_PPMC
  
  endchoice
  
@@ -31,7 +31,7 @@
  source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -174,6 +174,21 @@
+@@ -174,6 +174,21 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
diff --git a/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch
index 923b4fa1f..99a87cdfb 100644
--- a/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches-2.6.27/002-adm5120_flash.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -571,5 +571,9 @@
+@@ -571,5 +571,9 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
  
@@ -12,7 +12,7 @@
  
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -42,6 +42,7 @@
+@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff --git a/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch
index 1502a4225..a36a3e2e9 100644
--- a/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches-2.6.27/003-adm5120_switch.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -596,6 +596,10 @@
+@@ -596,6 +596,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -187,6 +187,7 @@
+@@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch
index ae85e6468..751af5a6b 100644
--- a/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches-2.6.27/005-adm5120_usb.patch
@@ -13,7 +13,7 @@
  	depends on USB
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,7 @@ isp1760-objs := isp1760-hcd.o isp1760-if
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
  
@@ -23,7 +23,7 @@
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -16,6 +16,7 @@
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch
index 63f90671d..d197cfe85 100644
--- a/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.27/007-adm5120_pci.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -51,3 +51,4 @@
+@@ -51,3 +51,4 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
  obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch
index 79d0bcbd3..4b8f8833d 100644
--- a/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.27/009-adm5120_leds_switch_trigger.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -223,4 +223,12 @@
+@@ -223,4 +223,12 @@ config LEDS_TRIGGER_NETDEV
  	  This allows LEDs to be controlled by network device activity.
  	  If unsure, say Y.
  
@@ -15,7 +15,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -32,3 +32,4 @@
+@@ -32,3 +32,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= 
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch
index 6d4daeeeb..90e221958 100644
--- a/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches-2.6.27/100-mtd_myloder_partition_parser.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -172,6 +172,22 @@
+@@ -172,6 +172,22 @@ config MTD_AR7_PARTS
  	---help---
  	  TI AR7 partitioning support
  
@@ -25,7 +25,7 @@
  config MTD_CHAR
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
  obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
  obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
diff --git a/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch
index 19ad785a4..d13ddaf63 100644
--- a/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.27/101-cfi_fixup_macronix_bootloc.patch
@@ -20,7 +20,7 @@
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -240,6 +247,41 @@
+@@ -240,6 +247,41 @@ static void fixup_s29gl032n_sectors(stru
  	}
  }
  
@@ -62,7 +62,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -275,6 +317,9 @@
+@@ -275,6 +317,9 @@ static struct cfi_fixup fixup_table[] = 
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
@@ -74,7 +74,7 @@
  
 --- a/drivers/mtd/chips/Kconfig
 +++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  
diff --git a/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch
index 9501800fe..6c827c851 100644
--- a/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches-2.6.27/102-jedec_pmc_39lvxxx_chips.patch
@@ -11,7 +11,7 @@
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1248,6 +1252,54 @@
+@@ -1248,6 +1252,54 @@ static const struct amd_flash_info jedec
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
diff --git a/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch
index 4ebf10ca2..d3b085804 100644
--- a/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches-2.6.27/103-mtd_trxsplit.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -55,6 +55,11 @@
+@@ -55,6 +55,11 @@ config MTD_ROOTFS_SPLIT
  	depends on MTD_PARTITIONS
  	default y
  
@@ -14,7 +14,7 @@
  	depends on MTD_PARTITIONS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@
+@@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
  obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
diff --git a/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch
index b30c5def6..e38a4d22a 100644
--- a/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.27/120-rb153_cf_driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ata/Makefile
 +++ b/drivers/ata/Makefile
-@@ -72,6 +72,7 @@
+@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,7 +10,7 @@
  # Should be last but one libata driver
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -568,6 +568,15 @@
+@@ -568,6 +568,15 @@ config PATA_RADISYS
  
  	  If unsure, say N.
  
diff --git a/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch
index 0352b86ea..03a67627b 100644
--- a/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.27/200-amba_pl010_hacks.patch
@@ -14,7 +14,7 @@
  
  #define AMBA_ISR_PASS_LIMIT	256
  
-@@ -80,9 +79,9 @@
+@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -26,7 +26,7 @@
  }
  
  static void pl010_start_tx(struct uart_port *port)
-@@ -90,9 +89,9 @@
+@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -38,7 +38,7 @@
  }
  
  static void pl010_stop_rx(struct uart_port *port)
-@@ -100,9 +99,9 @@
+@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -50,7 +50,7 @@
  }
  
  static void pl010_enable_ms(struct uart_port *port)
-@@ -110,9 +109,9 @@
+@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -62,7 +62,7 @@
  }
  
  static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -120,9 +119,9 @@
+@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a
  	struct tty_struct *tty = uap->port.info->port.tty;
  	unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -74,7 +74,7 @@
  		flag = TTY_NORMAL;
  
  		uap->port.icount.rx++;
-@@ -131,9 +130,9 @@
+@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a
  		 * Note that the error handling code is
  		 * out of the main execution path
  		 */
@@ -86,7 +86,7 @@
  
  			if (rsr & UART01x_RSR_BE) {
  				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -163,7 +162,7 @@
+@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a
  		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
  	ignore_char:
@@ -95,7 +95,7 @@
  	}
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(tty);
-@@ -176,7 +175,7 @@
+@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a
  	int count;
  
  	if (uap->port.x_char) {
@@ -104,7 +104,7 @@
  		uap->port.icount.tx++;
  		uap->port.x_char = 0;
  		return;
-@@ -188,7 +187,7 @@
+@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a
  
  	count = uap->port.fifosize >> 1;
  	do {
@@ -113,7 +113,7 @@
  		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
  		uap->port.icount.tx++;
  		if (uart_circ_empty(xmit))
-@@ -206,9 +205,9 @@
+@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua
  {
  	unsigned int status, delta;
  
@@ -125,7 +125,7 @@
  
  	delta = status ^ uap->old_status;
  	uap->old_status = status;
-@@ -236,7 +235,7 @@
+@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo
  
  	spin_lock(&uap->port.lock);
  
@@ -134,7 +134,7 @@
  	if (status) {
  		do {
  			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -249,7 +248,7 @@
+@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo
  			if (pass_counter-- == 0)
  				break;
  
@@ -143,7 +143,7 @@
  		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
  				   UART010_IIR_TIS));
  		handled = 1;
-@@ -263,7 +262,7 @@
+@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -152,7 +152,7 @@
  	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -273,7 +272,7 @@
+@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru
  	unsigned int result = 0;
  	unsigned int status;
  
@@ -161,7 +161,7 @@
  	if (status & UART01x_FR_DCD)
  		result |= TIOCM_CAR;
  	if (status & UART01x_FR_DSR)
-@@ -299,12 +298,12 @@
+@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_
  	unsigned int lcr_h;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -176,7 +176,7 @@
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
  
-@@ -332,12 +331,12 @@
+@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por
  	/*
  	 * initialise the old status of the modem signals
  	 */
@@ -191,7 +191,7 @@
  	       uap->port.membase + UART010_CR);
  
  	return 0;
-@@ -360,10 +359,10 @@
+@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p
  	/*
  	 * disable all interrupts, disable the port
  	 */
@@ -204,7 +204,7 @@
  		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
  	       uap->port.membase + UART010_LCRH);
  
-@@ -385,7 +384,7 @@
+@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port
  	/*
  	 * Ask the core to calculate the divisor for us.
  	 */
@@ -213,7 +213,7 @@
  	quot = uart_get_divisor(port, baud);
  
  	switch (termios->c_cflag & CSIZE) {
-@@ -448,25 +447,25 @@
+@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port
  		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
  	/* first, disable everything */
@@ -245,7 +245,7 @@
  
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
-@@ -538,7 +537,7 @@
+@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops =
  	.verify_port	= pl010_verify_port,
  };
  
@@ -254,7 +254,7 @@
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -548,10 +547,10 @@
+@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct
  	unsigned int status;
  
  	do {
@@ -267,7 +267,7 @@
  }
  
  static void
-@@ -565,8 +564,8 @@
+@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, 
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -278,7 +278,7 @@
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
  
-@@ -575,10 +574,10 @@
+@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, 
  	 *	and restore the TCR
  	 */
  	do {
@@ -291,7 +291,7 @@
  
  	clk_disable(uap->clk);
  }
-@@ -587,9 +586,9 @@
+@@ -587,9 +586,9 @@ static void __init
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
  			     int *parity, int *bits)
  {
@@ -303,7 +303,7 @@
  
  		*parity = 'n';
  		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -604,8 +603,8 @@
+@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am
  		else
  			*bits = 8;
  
@@ -314,7 +314,7 @@
  		*baud = uap->port.uartclk / (16 * (quot + 1));
  	}
  }
-@@ -623,7 +622,7 @@
+@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st
  	 * if so, search for the first available port that does have
  	 * console support.
  	 */
@@ -323,7 +323,7 @@
  		co->index = 0;
  	uap = amba_ports[co->index];
  	if (!uap)
-@@ -641,7 +640,7 @@
+@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st
  
  static struct uart_driver amba_reg;
  static struct console amba_console = {
@@ -332,7 +332,7 @@
  	.write		= pl010_console_write,
  	.device		= uart_console_device,
  	.setup		= pl010_console_setup,
-@@ -657,11 +656,11 @@
+@@ -657,11 +656,11 @@ static struct console amba_console = {
  
  static struct uart_driver amba_reg = {
  	.owner			= THIS_MODULE,
@@ -349,7 +349,7 @@
  
 --- a/drivers/serial/Kconfig
 +++ b/drivers/serial/Kconfig
-@@ -285,10 +285,25 @@
+@@ -285,10 +285,25 @@ config SERIAL_AMBA_PL010
  	help
  	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
  	  an Integrator/AP or Integrator/PP2 platform, or if you have a
diff --git a/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch
index 469f040f9..1b0f8fcba 100644
--- a/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches-2.6.27/202-pci_disable_common_quirks.patch
@@ -1,6 +1,6 @@
 --- a/drivers/pci/Kconfig
 +++ b/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@
+@@ -42,6 +42,12 @@ config PCI_DEBUG
  
  	  When in doubt, say N.
  
@@ -23,7 +23,7 @@
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -1554,6 +1555,7 @@
+@@ -1554,6 +1555,7 @@ static void __devinit fixup_rev1_53c810(
  	}
  }
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@@ -31,7 +31,7 @@
  
  static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
  {
-@@ -1634,6 +1636,7 @@
+@@ -1634,6 +1636,7 @@ void pci_fixup_device(enum pci_fixup_pas
  }
  EXPORT_SYMBOL(pci_fixup_device);
  
@@ -39,7 +39,7 @@
  /* Enable 1k I/O space granularity on the Intel P64H2 */
  static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
  {
-@@ -2007,3 +2010,4 @@
+@@ -2007,3 +2010,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
  			quirk_msi_intx_disable_bug);
  
  #endif /* CONFIG_PCI_MSI */
diff --git a/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch
index 5a3c11aab..bb94fd05e 100644
--- a/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches-2.6.27/203-gpio_leds_brightness.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/leds-gpio.c
 +++ b/drivers/leds/leds-gpio.c
-@@ -43,13 +43,17 @@
+@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  
diff --git a/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch
index 8c93912e0..b71b99159 100644
--- a/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches-2.6.27/310-adm5120_wdt.patch
@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -653,6 +653,18 @@
+@@ -653,6 +653,18 @@ config RC32434_WDT
  	  To compile this driver as a module, choose M here: the
  	  module will be called rc32434_wdt.
  
@@ -21,7 +21,7 @@
  	depends on SGI_HAS_INDYDOG
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -102,6 +102,7 @@
+@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
diff --git a/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch b/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch
index 5e99fffc5..dc0f843c8 100644
--- a/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch
+++ b/target/linux/adm5120/patches-2.6.27/800-usb_automatically_enable_rhsc_interrupt.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/adm5120-drv.c
 +++ b/drivers/usb/host/adm5120-drv.c
-@@ -174,7 +174,6 @@
+@@ -174,7 +174,6 @@ static const struct hc_driver adm5120_hc
  	 */
  	.hub_status_data =	admhc_hub_status_data,
  	.hub_control =		admhc_hub_control,
@@ -33,7 +33,7 @@
  static int
 --- a/drivers/usb/host/adm5120-pm.c
 +++ b/drivers/usb/host/adm5120-pm.c
-@@ -432,13 +432,17 @@
+@@ -432,13 +432,17 @@ static inline int admhc_rh_resume(struct
  static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
  		int any_connected)
  {