[adm5120] switch to 2.6.25.7

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11526 3c298f89-4303-0410-b956-a3cf2f4a3e73

14 files changed, 66 insertions, 70 deletions

diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch
index 26c026504..84d0a8d2f 100644
--- a/target/linux/adm5120/patches/001-adm5120.patch
+++ b/target/linux/adm5120/patches/001-adm5120.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -16,6 +16,20 @@
+@@ -18,6 +18,20 @@
  	prompt "System type"
  	default SGI_IP22
  
@@ -21,17 +21,17 @@
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -689,6 +703,7 @@
+@@ -683,6 +697,7 @@
  
  endchoice
  
 +source "arch/mips/adm5120/Kconfig"
  source "arch/mips/au1000/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
  source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -166,6 +166,16 @@
+@@ -174,6 +174,16 @@
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
@@ -50,9 +50,9 @@
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
 --- a/include/asm-mips/bootinfo.h
 +++ b/include/asm-mips/bootinfo.h
-@@ -198,6 +198,58 @@
- #define MACH_GROUP_BRCM		23	/* Broadcom			*/
- #define  MACH_BCM47XX		1	/* Broadcom BCM47XX		*/
+@@ -94,6 +94,58 @@
+ #define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
+ #define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
  
 +/*
 + * Valid machtype for group ADMtek ADM5120
@@ -108,4 +108,4 @@
 +
  #define CL_SIZE			COMMAND_LINE_SIZE
  
- const char *get_system_type(void);
+ extern char *system_type;
diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch
index d2326fa95..143952321 100644
--- a/target/linux/adm5120/patches/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches/002-adm5120_flash.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -597,5 +597,9 @@
+@@ -590,5 +590,9 @@
  
  	  This selection automatically selects the map_ram driver.
  
@@ -12,7 +12,7 @@
  
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -45,6 +45,7 @@
+@@ -44,6 +44,7 @@
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch
index 1d2e428dd..20718119f 100644
--- a/target/linux/adm5120/patches/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches/003-adm5120_switch.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -601,6 +601,10 @@
+@@ -606,6 +606,10 @@
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -183,6 +183,7 @@
+@@ -187,6 +187,7 @@
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch
index ef9a4fd9d..4ab31dd98 100644
--- a/target/linux/adm5120/patches/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches/005-adm5120_usb.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -261,3 +261,6 @@
+@@ -260,3 +260,6 @@
  	  To compile this driver as a module, choose M here: the
  	  module will be called r8a66597-hcd.
  
diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch
index 6c8886da5..ac108e512 100644
--- a/target/linux/adm5120/patches/006-adm5120_leds.patch
+++ b/target/linux/adm5120/patches/006-adm5120_leds.patch
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -18,6 +18,21 @@
- 
- comment "LED drivers"
+@@ -25,6 +25,21 @@
+ 	  This option enables support for LEDs driven using outputs
+ 	  of the dedicated PWM controller found on newer Atmel SOCs.
  
 +config LEDS_ADM5120
 +	tristate "LED Support for ADM5120 GPIO LEDs"
@@ -29,6 +29,6 @@
  
  # LED Platform Drivers
 +obj-$(CONFIG_LEDS_ADM5120)		+= leds-adm5120.o
+ obj-$(CONFIG_LEDS_ATMEL_PWM)		+= leds-atmel-pwm.o
  obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
  obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch
index 540b7d90e..75d3be65c 100644
--- a/target/linux/adm5120/patches/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches/007-adm5120_pci.patch
@@ -7,7 +7,7 @@
 +obj-$(CONFIG_PCI_ADM5120)	+= pci-adm5120.o
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1703,6 +1703,9 @@
+@@ -1705,6 +1705,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
index bb0403875..18280ed85 100644
--- a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -178,4 +178,12 @@
+@@ -213,4 +213,12 @@
  	  This allows LEDs to be initialised in the ON state.
  	  If unsure, say Y.
  
@@ -15,7 +15,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -28,3 +28,4 @@
+@@ -30,3 +30,4 @@
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
index fe9c45b09..f5188936d 100644
--- a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
@@ -1,8 +1,8 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -160,6 +160,22 @@
- 	  for your particular device. It won't happen automatically. The
- 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+@@ -168,6 +168,22 @@
+ 	  the partition map from the children of the flash node,
+ 	  as described in Documentation/powerpc/booting-without-of.txt.
  
 +config MTD_MYLOADER_PARTS
 +	tristate "MyLoader partition parsing"
@@ -25,10 +25,10 @@
  config MTD_CHAR
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+@@ -12,6 +12,7 @@
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
 +obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
  
  # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
index 9acb626bb..917908893 100644
--- a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
@@ -20,8 +20,8 @@
  static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
  static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
  static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +224,41 @@
- 	mtd->flags |= MTD_STUPID_LOCK;
+@@ -221,6 +228,41 @@
+ 	mtd->flags |= MTD_POWERUP_LOCK;
  }
  
 +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
@@ -60,18 +60,18 @@
 +#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
 +
  static struct cfi_fixup cfi_fixup_table[] = {
- #ifdef AMD_BOOTLOC_BUG
- 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +273,9 @@
- 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+@@ -252,6 +294,9 @@
+ 	 */
+ 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
+ 	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
 +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
 +	{ MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
 +#endif
  	{ 0, 0, NULL, NULL }
  };
- static struct cfi_fixup jedec_fixup_table[] = {
+ 
 --- a/drivers/mtd/chips/Kconfig
 +++ b/drivers/mtd/chips/Kconfig
 @@ -196,6 +196,14 @@
diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
index 0c512ea6a..7f352f67e 100644
--- a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
@@ -11,7 +11,7 @@
  #define PM49FL002	0x006D
  #define PM49FL004	0x006E
  #define PM49FL008	0x006A
-@@ -1264,6 +1268,58 @@
+@@ -1170,6 +1174,54 @@
  			ERASEINFO(0x02000,2),
  			ERASEINFO(0x04000,1),
  		}
@@ -19,12 +19,11 @@
 +		.mfr_id		= MANUFACTURER_PMC,
 +		.dev_id		= PM39LV512,
 +		.name		= "PMC Pm39LV512",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_64KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
++		.devtypes	= CFI_DEVICETYPE_X8,
++		.uaddr		= MTD_UADDR_0x0555_0x02AA,
++		.dev_size	= SIZE_64KiB,
++		.cmd_set	= P_ID_AMD_STD,
++		.nr_regions	= 1,
 +		.regions	= {
 +			ERASEINFO(0x01000,16),
 +		}
@@ -32,12 +31,11 @@
 +		.mfr_id		= MANUFACTURER_PMC,
 +		.dev_id		= PM39LV010,
 +		.name		= "PMC Pm39LV010",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_128KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
++		.devtypes	= CFI_DEVICETYPE_X8,
++		.uaddr		= MTD_UADDR_0x0555_0x02AA,
++		.dev_size	= SIZE_128KiB,
++		.cmd_set	= P_ID_AMD_STD,
++		.nr_regions	= 1,
 +		.regions	= {
 +			ERASEINFO(0x01000,32),
 +		}
@@ -45,12 +43,11 @@
 +		.mfr_id		= MANUFACTURER_PMC,
 +		.dev_id		= PM39LV020,
 +		.name		= "PMC Pm39LV020",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_256KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
++		.devtypes	= CFI_DEVICETYPE_X8,
++		.uaddr		= MTD_UADDR_0x0555_0x02AA,
++		.dev_size	= SIZE_256KiB,
++		.cmd_set	= P_ID_AMD_STD,
++		.nr_regions	= 1,
 +		.regions	= {
 +			ERASEINFO(0x01000,64),
 +		}
@@ -58,12 +55,11 @@
 +		.mfr_id		= MANUFACTURER_PMC,
 +		.dev_id		= PM39LV040,
 +		.name		= "PMC Pm39LV040",
-+ 		.uaddr		= {
-+			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
-+		},
-+		.DevSize	= SIZE_512KiB,
-+		.CmdSet		= P_ID_AMD_STD,
-+		.NumEraseRegions= 1,
++		.devtypes	= CFI_DEVICETYPE_X8,
++		.uaddr		= MTD_UADDR_0x0555_0x02AA,
++		.dev_size	= SIZE_512KiB,
++		.cmd_set	= P_ID_AMD_STD,
++		.nr_regions	= 1,
 +		.regions	= {
 +			ERASEINFO(0x01000,128),
 +		}
diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
index ad07b7a8a..6f371e340 100644
--- a/target/linux/adm5120/patches/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ata/Makefile
 +++ b/drivers/ata/Makefile
-@@ -69,6 +69,7 @@
+@@ -71,6 +71,7 @@
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,7 +10,7 @@
  # Should be last but one libata driver
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -660,4 +660,13 @@
+@@ -679,4 +679,13 @@
  
  	  If unsure, say N.
  
diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
index 13142add3..25149885a 100644
--- a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
@@ -15,15 +15,15 @@
  	default y
 --- a/drivers/pci/quirks.c
 +++ b/drivers/pci/quirks.c
-@@ -23,6 +23,7 @@
- #include <linux/acpi.h>
+@@ -24,6 +24,7 @@
+ #include <linux/kallsyms.h>
  #include "pci.h"
  
 +#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
  /* The Mellanox Tavor device gives false positive parity errors
   * Mark this device with a broken_parity_status, to allow
   * PCI scanning code to "skip" this now blacklisted device.
-@@ -1480,6 +1481,7 @@
+@@ -1495,6 +1496,7 @@
  	}
  }
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
@@ -31,7 +31,7 @@
  
  static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
  {
-@@ -1543,6 +1545,7 @@
+@@ -1562,6 +1564,7 @@
  }
  EXPORT_SYMBOL(pci_fixup_device);
  
@@ -39,7 +39,7 @@
  /* Enable 1k I/O space granularity on the Intel P64H2 */
  static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
  {
-@@ -1756,3 +1759,4 @@
+@@ -1875,3 +1878,4 @@
  			quirk_msi_intx_disable_bug);
  
  #endif /* CONFIG_PCI_MSI */
diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
index 3e9f5271c..06394da29 100644
--- a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
@@ -23,5 +23,5 @@
 +		break;
 +	}
  
- 	/* setting GPIOs with I2C/etc requires a preemptible task context */
- 	if (led_dat->can_sleep) {
+ 	/* Setting GPIOs with I2C/etc requires a task context, and we don't
+ 	 * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch
index 1136ee8e6..78eb62862 100644
--- a/target/linux/adm5120/patches/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches/310-adm5120_wdt.patch
@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -607,6 +607,18 @@
+@@ -619,6 +619,18 @@
  
  # MIPS Architecture
  
@@ -18,10 +18,10 @@
 +
  config INDYDOG
  	tristate "Indy/I2 Hardware Watchdog"
- 	depends on SGI_IP22
+ 	depends on SGI_HAS_INDYDOG
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -89,6 +89,7 @@
+@@ -90,6 +90,7 @@
  # M68KNOMMU Architecture
  
  # MIPS Architecture