[adm5120] experimental support for 2.6.27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12863 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 4728 insertions, 0 deletions

diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
new file mode 100644
index 000000000..c121f7be2
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
@@ -0,0 +1,842 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-dbg.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+/*-------------------------------------------------------------------------*/
+
+static inline char *ed_typestring(int ed_type)
+{
+	switch (ed_type) {
+	case PIPE_CONTROL:
+		return "ctrl";
+	case PIPE_BULK:
+		return "bulk";
+	case PIPE_INTERRUPT:
+		return "intr";
+	case PIPE_ISOCHRONOUS:
+		return "isoc";
+	}
+	return "(bad ed_type)";
+}
+
+static inline char *ed_statestring(int state)
+{
+	switch (state) {
+	case ED_IDLE:
+		return "IDLE";
+	case ED_UNLINK:
+		return "UNLINK";
+	case ED_OPER:
+		return "OPER";
+	}
+	return "?STATE";
+}
+
+static inline char *pipestring(int pipe)
+{
+	return ed_typestring(usb_pipetype(pipe));
+}
+
+static inline char *td_pidstring(u32 info)
+{
+	switch (info & TD_DP) {
+	case TD_DP_SETUP:
+		return "SETUP";
+	case TD_DP_IN:
+		return "IN";
+	case TD_DP_OUT:
+		return "OUT";
+	}
+	return "?PID";
+}
+
+static inline char *td_togglestring(u32 info)
+{
+	switch (info & TD_T) {
+	case TD_T_DATA0:
+		return "DATA0";
+	case TD_T_DATA1:
+		return "DATA1";
+	case TD_T_CARRY:
+		return "CARRY";
+	}
+	return "?TOGGLE";
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header
+ */
+static void __attribute__((unused))
+urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
+{
+	unsigned int pipe = urb->pipe;
+
+	if (!urb->dev || !urb->dev->bus) {
+		admhc_dbg(ahcd, "%s URB: no dev", str);
+		return;
+	}
+
+#ifndef	ADMHC_VERBOSE_DEBUG
+	if (status != 0)
+#endif
+	admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
+			"stat=%d\n",
+			str,
+			urb,
+			usb_pipedevice (pipe),
+			usb_pipeendpoint (pipe),
+			usb_pipeout(pipe)? "out" : "in",
+			pipestring(pipe),
+			urb->transfer_flags,
+			urb->actual_length,
+			urb->transfer_buffer_length,
+			status);
+
+#ifdef	ADMHC_VERBOSE_DEBUG
+	if (!small) {
+		int i, len;
+
+		if (usb_pipecontrol(pipe)) {
+			admhc_dbg(ahcd, "setup(8):");
+			for (i = 0; i < 8 ; i++)
+				printk (" %02x", ((__u8 *) urb->setup_packet) [i]);
+			printk ("\n");
+		}
+		if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
+			admhc_dbg(ahcd, "data(%d/%d):",
+				urb->actual_length,
+				urb->transfer_buffer_length);
+			len = usb_pipeout(pipe)?
+						urb->transfer_buffer_length: urb->actual_length;
+			for (i = 0; i < 16 && i < len; i++)
+				printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
+			printk("%s stat:%d\n", i < len? "...": "", status);
+		}
+	}
+#endif /* ADMHC_VERBOSE_DEBUG */
+}
+
+#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
+	do { \
+	if (next) { \
+		unsigned s_len; \
+		s_len = scnprintf(*next, *size, format, ## arg ); \
+		*size -= s_len; *next += s_len; \
+	} else \
+		admhc_dbg(ahcd,format, ## arg ); \
+	} while (0);
+
+
+static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask,
+		char **next, unsigned *size)
+{
+	admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n",
+		label,
+		mask,
+		(mask & ADMHC_INTR_INTA) ? " INTA" : "",
+		(mask & ADMHC_INTR_FATI) ? " FATI" : "",
+		(mask & ADMHC_INTR_SWI) ? " SWI" : "",
+		(mask & ADMHC_INTR_TDC) ? " TDC" : "",
+		(mask & ADMHC_INTR_FNO) ? " FNO" : "",
+		(mask & ADMHC_INTR_SO) ? " SO" : "",
+		(mask & ADMHC_INTR_INSM) ? " INSM" : "",
+		(mask & ADMHC_INTR_BABI) ? " BABI" : "",
+		(mask & ADMHC_INTR_7) ? " !7!" : "",
+		(mask & ADMHC_INTR_6) ? " !6!" : "",
+		(mask & ADMHC_INTR_RESI) ? " RESI" : "",
+		(mask & ADMHC_INTR_SOFI) ? " SOFI" : ""
+		);
+}
+
+static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
+		char **next, unsigned *size)
+{
+	if (value)
+		admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
+}
+
+static char *buss2string (int state)
+{
+	switch (state) {
+	case ADMHC_BUSS_RESET:
+		return "reset";
+	case ADMHC_BUSS_RESUME:
+		return "resume";
+	case ADMHC_BUSS_OPER:
+		return "operational";
+	case ADMHC_BUSS_SUSPEND:
+		return "suspend";
+	}
+	return "?state";
+}
+
+static void
+admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
+{
+	struct admhcd_regs __iomem *regs = ahcd->regs;
+	u32			temp;
+
+	temp = admhc_readl(ahcd, &regs->gencontrol);
+	admhc_dbg_sw(ahcd, next, size,
+		"gencontrol 0x%08x%s%s%s%s\n",
+		temp,
+		(temp & ADMHC_CTRL_UHFE) ? " UHFE" : "",
+		(temp & ADMHC_CTRL_SIR) ? " SIR" : "",
+		(temp & ADMHC_CTRL_DMAA) ? " DMAA" : "",
+		(temp & ADMHC_CTRL_SR) ? " SR" : ""
+		);
+
+	temp = admhc_readl(ahcd, &regs->host_control);
+	admhc_dbg_sw(ahcd, next, size,
+		"host_control 0x%08x BUSS=%s%s\n",
+		temp,
+		buss2string(temp & ADMHC_HC_BUSS),
+		(temp & ADMHC_HC_DMAE) ? " DMAE" : ""
+		);
+
+	admhc_dump_intr_mask(ahcd, "int_status",
+			admhc_readl(ahcd, &regs->int_status),
+			next, size);
+	admhc_dump_intr_mask(ahcd, "int_enable",
+			admhc_readl(ahcd, &regs->int_enable),
+			next, size);
+
+	maybe_print_eds(ahcd, "hosthead",
+			admhc_readl(ahcd, &regs->hosthead), next, size);
+}
+
+#define dbg_port_sw(hc,num,value,next,size) \
+	admhc_dbg_sw(hc, next, size, \
+		"portstatus [%d] " \
+		"0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+		num, temp, \
+		(temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
+		(temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
+		(temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
+		(temp & ADMHC_PS_PESC) ? " PESC" : "", \
+		(temp & ADMHC_PS_CSC) ? " CSC" : "", \
+		\
+		(temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
+		(temp & ADMHC_PS_PPS) ? " PPS" : "", \
+		(temp & ADMHC_PS_PRS) ? " PRS" : "", \
+		(temp & ADMHC_PS_POCI) ? " POCI" : "", \
+		(temp & ADMHC_PS_PSS) ? " PSS" : "", \
+		\
+		(temp & ADMHC_PS_PES) ? " PES" : "", \
+		(temp & ADMHC_PS_CCS) ? " CCS" : "" \
+		);
+
+
+static void
+admhc_dump_roothub(
+	struct admhcd *ahcd,
+	int verbose,
+	char **next,
+	unsigned *size)
+{
+	u32			temp, i;
+
+	temp = admhc_read_rhdesc(ahcd);
+	if (temp == ~(u32)0)
+		return;
+
+	if (verbose) {
+		admhc_dbg_sw(ahcd, next, size,
+			"rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n",
+			temp,
+			(temp & ADMHC_RH_CRWE) ? " CRWE" : "",
+			(temp & ADMHC_RH_OCIC) ? " OCIC" : "",
+			(temp & ADMHC_RH_LPSC) ? " LPSC" : "",
+			(temp & ADMHC_RH_LPSC) ? " DRWE" : "",
+			(temp & ADMHC_RH_LPSC) ? " OCI" : "",
+			(temp & ADMHC_RH_LPSC) ? " LPS" : "",
+			((temp & ADMHC_RH_PPCM) >> 16),
+			(temp & ADMHC_RH_NOCP) ? " NOCP" : "",
+			(temp & ADMHC_RH_OCPM) ? " OCPM" : "",
+			(temp & ADMHC_RH_NPS) ? " NPS" : "",
+			(temp & ADMHC_RH_PSM) ? " PSM" : "",
+			(temp & ADMHC_RH_NUMP), ahcd->num_ports
+			);
+	}
+
+	for (i = 0; i < ahcd->num_ports; i++) {
+		temp = admhc_read_portstatus(ahcd, i);
+		dbg_port_sw(ahcd, i, temp, next, size);
+	}
+}
+
+static void admhc_dump(struct admhcd *ahcd, int verbose)
+{
+	admhc_dbg(ahcd, "ADMHC ahcd state\n");
+
+	/* dumps some of the state we know about */
+	admhc_dump_status(ahcd, NULL, NULL);
+	admhc_dbg(ahcd,"current frame #%04x\n",
+		admhc_frame_no(ahcd));
+
+	admhc_dump_roothub(ahcd, verbose, NULL, NULL);
+}
+
+static const char data0[] = "DATA0";
+static const char data1[] = "DATA1";
+
+static void admhc_dump_td(const struct admhcd *ahcd, const char *label,
+		const struct td *td)
+{
+	u32	tmp;
+
+	admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n",
+		label, td,
+		td->urb, td->index,
+		hc32_to_cpup(ahcd, &td->hwNextTD));
+
+	tmp = hc32_to_cpup(ahcd, &td->hwINFO);
+	admhc_dbg(ahcd, "     status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n",
+		tmp,
+		(tmp & TD_OWN) ? " OWN" : "",
+		TD_CC_GET(tmp),
+		TD_EC_GET(tmp),
+		td_togglestring(tmp),
+		td_pidstring(tmp),
+		TD_ISI_GET(tmp),
+		TD_FN_GET(tmp));
+
+	tmp = hc32_to_cpup(ahcd, &td->hwCBL);
+	admhc_dbg(ahcd, "     dbp %08x; cbl %08x; LEN=%d%s\n",
+		hc32_to_cpup(ahcd, &td->hwDBP),
+		tmp,
+		TD_BL_GET(tmp),
+		(tmp & TD_IE) ? " IE" : "");
+}
+
+/* caller MUST own hcd spinlock if verbose is set! */
+static void __attribute__((unused))
+admhc_dump_ed(const struct admhcd *ahcd, const char *label,
+		const struct ed *ed, int verbose)
+{
+	u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO);
+
+	admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n",
+		label,
+		ed, ed_statestring(ed->state), ed_typestring(ed->type),
+		hc32_to_cpup(ahcd, &ed->hwNextED));
+
+	admhc_dbg(ahcd, "  info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp,
+		ED_MPS_GET(tmp),
+		(tmp & ED_ISO) ? " ISO" : "",
+		(tmp & ED_SKIP) ? " SKIP" : "",
+		(tmp & ED_SPEED_FULL) ? " FULL" : " LOW",
+		(tmp & ED_INT) ? " INT" : "",
+		ED_EN_GET(tmp),
+		ED_FA_GET(tmp));
+
+	tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
+	admhc_dbg(ahcd, "  tds: head %08x tail %08x %s%s%s\n",
+		tmp & TD_MASK,
+		hc32_to_cpup (ahcd, &ed->hwTailP),
+		(tmp & ED_C) ? data1 : data0,
+		(tmp & ED_H) ? " HALT" : "",
+		verbose ? " td list follows" : " (not listing)");
+
+	if (verbose) {
+		struct list_head	*tmp;
+
+		/* use ed->td_list because HC concurrently modifies
+		 * hwNextTD as it accumulates ed_donelist.
+		 */
+		list_for_each(tmp, &ed->td_list) {
+			struct td		*td;
+			td = list_entry(tmp, struct td, td_list);
+			admhc_dump_td (ahcd, "  ->", td);
+		}
+	}
+}
+
+#else /* ifdef DEBUG */
+
+static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str,
+	int small) {}
+static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label,
+	const struct ed *ed, int verbose) {}
+static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label,
+	const struct td *td) {}
+static inline void admhc_dump(struct admhcd *ahcd, int verbose) {}
+
+#undef ADMHC_VERBOSE_DEBUG
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef STUB_DEBUG_FILES
+
+static inline void create_debug_files(struct admhcd *bus) { }
+static inline void remove_debug_files(struct admhcd *bus) { }
+
+#else
+
+static int debug_async_open(struct inode *, struct file *);
+static int debug_periodic_open(struct inode *, struct file *);
+static int debug_registers_open(struct inode *, struct file *);
+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
+static int debug_close(struct inode *, struct file *);
+
+static const struct file_operations debug_async_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_async_open,
+	.read		= debug_output,
+	.release	= debug_close,
+};
+static const struct file_operations debug_periodic_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_periodic_open,
+	.read		= debug_output,
+	.release	= debug_close,
+};
+static const struct file_operations debug_registers_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_registers_open,
+	.read		= debug_output,
+	.release	= debug_close,
+};
+
+static struct dentry *admhc_debug_root;
+
+struct debug_buffer {
+	ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
+	struct device *dev;
+	struct mutex mutex;     /* protect filling of buffer */
+	size_t count;           /* number of characters filled into buffer */
+	char *page;
+};
+
+static ssize_t
+show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
+{
+	unsigned temp;
+	unsigned size = count;
+
+	if (!ed)
+		return 0;
+
+	/* dump a snapshot of the bulk or control schedule */
+	while (ed) {
+		u32 info = hc32_to_cpu(ahcd, ed->hwINFO);
+		u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP);
+		u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP);
+		struct list_head *entry;
+		struct td	*td;
+
+		temp = scnprintf(buf, size,
+			"ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s"
+			" h:%08x t:%08x",
+			ed,
+			ed_statestring(ed->state),
+			ed_typestring (ed->type),
+			(info & ED_SPEED_FULL) ? 'f' : 'l',
+			info & ED_FA_MASK,
+			(info >> ED_EN_SHIFT) & ED_EN_MASK,
+			(info & ED_INT) ? "INT " : "",
+			(info & ED_ISO) ? "ISO " : "",
+			(info >> ED_MPS_SHIFT) & ED_MPS_MASK ,
+			info,
+			(info & ED_SKIP) ? " S" : "",
+			(headp & ED_H) ? " H" : "",
+			(headp & ED_C) ? data1 : data0,
+			headp & ED_MASK,tailp);
+		size -= temp;
+		buf += temp;
+
+		list_for_each(entry, &ed->td_list) {
+			u32		dbp, cbl;
+
+			td = list_entry(entry, struct td, td_list);
+			info = hc32_to_cpup (ahcd, &td->hwINFO);
+			dbp = hc32_to_cpup (ahcd, &td->hwDBP);
+			cbl = hc32_to_cpup (ahcd, &td->hwCBL);
+
+			temp = scnprintf(buf, size,
+				"\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
+				td,
+				td_pidstring(info),
+				TD_BL_GET(cbl),
+				(info & TD_OWN) ? "" : "DONE ",
+				(cbl & TD_IE) ? "IE " : "",
+				TD_CC_GET (info), td->urb, info, cbl);
+			size -= temp;
+			buf += temp;
+		}
+
+		temp = scnprintf(buf, size, "\n");
+		size -= temp;
+		buf += temp;
+
+		ed = ed->ed_next;
+	}
+
+	return count - size;
+}
+
+static ssize_t fill_async_buffer(struct debug_buffer *buf)
+{
+	struct usb_bus		*bus;
+	struct usb_hcd		*hcd;
+	struct admhcd		*ahcd;
+	size_t			temp;
+	unsigned long		flags;
+
+	bus = dev_get_drvdata(buf->dev);
+	hcd = bus_to_hcd(bus);
+	ahcd = hcd_to_admhcd(hcd);
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+	temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	return temp;
+}
+
+
+#define DBG_SCHED_LIMIT 64
+
+static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
+{
+	struct usb_bus		*bus;
+	struct usb_hcd		*hcd;
+	struct admhcd		*ahcd;
+	struct ed		**seen, *ed;
+	unsigned long		flags;
+	unsigned		temp, size, seen_count;
+	char			*next;
+	unsigned		i;
+
+	if (!(seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
+		return 0;
+	seen_count = 0;
+
+	bus = dev_get_drvdata(buf->dev);
+	hcd = bus_to_hcd(bus);
+	ahcd = hcd_to_admhcd(hcd);
+	next = buf->page;
+	size = PAGE_SIZE;
+
+	temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
+	size -= temp;
+	next += temp;
+
+	/* dump a snapshot of the periodic schedule (and load) */
+	spin_lock_irqsave(&ahcd->lock, flags);
+	for (i = 0; i < NUM_INTS; i++) {
+		if (!(ed = ahcd->periodic [i]))
+			continue;
+
+		temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load [i]);
+		size -= temp;
+		next += temp;
+
+		do {
+			temp = scnprintf(next, size, " ed%d/%p",
+				ed->interval, ed);
+			size -= temp;
+			next += temp;
+			for (temp = 0; temp < seen_count; temp++) {
+				if (seen [temp] == ed)
+					break;
+			}
+
+			/* show more info the first time around */
+			if (temp == seen_count) {
+				u32	info = hc32_to_cpu (ahcd, ed->hwINFO);
+				struct list_head	*entry;
+				unsigned		qlen = 0;
+
+				/* qlen measured here in TDs, not urbs */
+				list_for_each (entry, &ed->td_list)
+					qlen++;
+				temp = scnprintf(next, size,
+					" (%cs dev%d ep%d%s qlen %u"
+					" max %d %08x%s%s)",
+					(info & ED_SPEED_FULL) ? 'f' : 'l',
+					ED_FA_GET(info),
+					ED_EN_GET(info),
+					(info & ED_ISO) ? "iso" : "int",
+					qlen,
+					ED_MPS_GET(info),
+					info,
+					(info & ED_SKIP) ? " K" : "",
+					(ed->hwHeadP &
+						cpu_to_hc32(ahcd, ED_H)) ?
+							" H" : "");
+				size -= temp;
+				next += temp;
+
+				if (seen_count < DBG_SCHED_LIMIT)
+					seen [seen_count++] = ed;
+
+				ed = ed->ed_next;
+
+			} else {
+				/* we've seen it and what's after */
+				temp = 0;
+				ed = NULL;
+			}
+
+		} while (ed);
+
+		temp = scnprintf(next, size, "\n");
+		size -= temp;
+		next += temp;
+	}
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+	kfree (seen);
+
+	return PAGE_SIZE - size;
+}
+
+
+#undef DBG_SCHED_LIMIT
+
+static ssize_t fill_registers_buffer(struct debug_buffer *buf)
+{
+	struct usb_bus		*bus;
+	struct usb_hcd		*hcd;
+	struct admhcd		*ahcd;
+	struct admhcd_regs __iomem *regs;
+	unsigned long		flags;
+	unsigned		temp, size;
+	char			*next;
+	u32			rdata;
+
+	bus = dev_get_drvdata(buf->dev);
+	hcd = bus_to_hcd(bus);
+	ahcd = hcd_to_admhcd(hcd);
+	regs = ahcd->regs;
+	next = buf->page;
+	size = PAGE_SIZE;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+	/* dump driver info, then registers in spec order */
+
+	admhc_dbg_sw(ahcd, &next, &size,
+		"bus %s, device %s\n"
+		"%s\n"
+		"%s version " DRIVER_VERSION "\n",
+		hcd->self.controller->bus->name,
+		hcd->self.controller->bus_id,
+		hcd->product_desc,
+		hcd_name);
+
+	if (bus->controller->power.power_state.event) {
+		size -= scnprintf(next, size,
+			"SUSPENDED (no register access)\n");
+		goto done;
+	}
+
+	admhc_dump_status(ahcd, &next, &size);
+
+	/* other registers mostly affect frame timings */
+	rdata = admhc_readl(ahcd, &regs->fminterval);
+	temp = scnprintf(next, size,
+			"fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n",
+			rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "",
+			(rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK,
+			rdata  & ADMHC_SFI_FI_MASK);
+	size -= temp;
+	next += temp;
+
+	rdata = admhc_readl(ahcd, &regs->fmnumber);
+	temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n",
+			rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "",
+			(rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK,
+			rdata  & ADMHC_SFN_FN_MASK);
+	size -= temp;
+	next += temp;
+
+	/* TODO: use predefined bitmask */
+	rdata = admhc_readl(ahcd, &regs->lsthresh);
+	temp = scnprintf(next, size, "lsthresh 0x%04x\n",
+			rdata & 0x3fff);
+	size -= temp;
+	next += temp;
+
+	temp = scnprintf(next, size, "hub poll timer: %s\n",
+			admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF");
+	size -= temp;
+	next += temp;
+
+	/* roothub */
+	admhc_dump_roothub(ahcd, 1, &next, &size);
+
+done:
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+	return PAGE_SIZE - size;
+}
+
+
+static struct debug_buffer *alloc_buffer(struct device *dev,
+				ssize_t (*fill_func)(struct debug_buffer *))
+{
+	struct debug_buffer *buf;
+
+	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
+
+	if (buf) {
+		buf->dev = dev;
+		buf->fill_func = fill_func;
+		mutex_init(&buf->mutex);
+	}
+
+	return buf;
+}
+
+static int fill_buffer(struct debug_buffer *buf)
+{
+	int ret = 0;
+
+	if (!buf->page)
+		buf->page = (char *)get_zeroed_page(GFP_KERNEL);
+
+	if (!buf->page) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = buf->fill_func(buf);
+
+	if (ret >= 0) {
+		buf->count = ret;
+		ret = 0;
+	}
+
+out:
+	return ret;
+}
+
+static ssize_t debug_output(struct file *file, char __user *user_buf,
+			size_t len, loff_t *offset)
+{
+	struct debug_buffer *buf = file->private_data;
+	int ret = 0;
+
+	mutex_lock(&buf->mutex);
+	if (buf->count == 0) {
+		ret = fill_buffer(buf);
+		if (ret != 0) {
+			mutex_unlock(&buf->mutex);
+			goto out;
+		}
+	}
+	mutex_unlock(&buf->mutex);
+
+	ret = simple_read_from_buffer(user_buf, len, offset,
+					buf->page, buf->count);
+
+out:
+	return ret;
+}
+
+static int debug_close(struct inode *inode, struct file *file)
+{
+	struct debug_buffer *buf = file->private_data;
+
+	if (buf) {
+		if (buf->page)
+			free_page((unsigned long)buf->page);
+		kfree(buf);
+	}
+
+	return 0;
+}
+
+static int debug_async_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_periodic_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+						fill_periodic_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static int debug_registers_open(struct inode *inode, struct file *file)
+{
+	file->private_data = alloc_buffer(inode->i_private,
+						fill_registers_buffer);
+
+	return file->private_data ? 0 : -ENOMEM;
+}
+
+static inline void create_debug_files(struct admhcd *ahcd)
+{
+	struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
+	struct device *dev = bus->dev;
+
+	ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
+	if (!ahcd->debug_dir)
+		goto dir_error;
+
+	ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
+						ahcd->debug_dir, dev,
+						&debug_async_fops);
+	if (!ahcd->debug_async)
+		goto async_error;
+
+	ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
+						ahcd->debug_dir, dev,
+						&debug_periodic_fops);
+	if (!ahcd->debug_periodic)
+		goto periodic_error;
+
+	ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
+						ahcd->debug_dir, dev,
+						&debug_registers_fops);
+	if (!ahcd->debug_registers)
+		goto registers_error;
+
+	admhc_dbg(ahcd, "created debug files\n");
+	return;
+
+registers_error:
+	debugfs_remove(ahcd->debug_periodic);
+periodic_error:
+	debugfs_remove(ahcd->debug_async);
+async_error:
+	debugfs_remove(ahcd->debug_dir);
+dir_error:
+	ahcd->debug_periodic = NULL;
+	ahcd->debug_async = NULL;
+	ahcd->debug_dir = NULL;
+}
+
+static inline void remove_debug_files(struct admhcd *ahcd)
+{
+	debugfs_remove(ahcd->debug_registers);
+	debugfs_remove(ahcd->debug_periodic);
+	debugfs_remove(ahcd->debug_async);
+	debugfs_remove(ahcd->debug_dir);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c
new file mode 100644
index 000000000..bf250c056
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c
@@ -0,0 +1,236 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-au1xxx.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *   (C) Copyright 2002 Hewlett-Packard Company
+ *
+ *   Written by Christopher Hoover <ch@hpl.hp.com>
+ *   Based on fragments of previous driver by Rusell King et al.
+ *
+ *   Modified for LH7A404 from ahcd-sa1111.c
+ *    by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *   Modified for AMD Alchemy Au1xxx
+ *    by Matt Porter <mporter@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+
+#ifdef DEBUG
+#define HCD_DBG(f, a...)	printk(KERN_DEBUG "%s: " f, hcd_name, ## a)
+#else
+#define HCD_DBG(f, a...)	do {} while (0)
+#endif
+#define HCD_ERR(f, a...)	printk(KERN_ERR "%s: " f, hcd_name, ## a)
+#define HCD_INFO(f, a...)	printk(KERN_INFO "%s: " f, hcd_name, ## a)
+
+/*-------------------------------------------------------------------------*/
+
+static int admhc_adm5120_probe(const struct hc_driver *driver,
+		  struct platform_device *dev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+	int irq;
+	struct resource *regs;
+
+	/* sanity checks */
+	regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		HCD_DBG("no IOMEM resource found\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		HCD_DBG("no IRQ resource found\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, "ADM5120");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = regs->start;
+	hcd->rsrc_len = regs->end - regs->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		HCD_DBG("request_mem_region failed\n");
+		retval = -EBUSY;
+		goto err_dev;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		HCD_DBG("ioremap failed\n");
+		retval = -ENOMEM;
+		goto err_mem;
+	}
+
+	admhc_hcd_init(hcd_to_admhcd(hcd));
+
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (retval)
+		goto err_io;
+
+	return 0;
+
+err_io:
+	iounmap(hcd->regs);
+err_mem:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_dev:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+static void admhc_adm5120_remove(struct usb_hcd *hcd,
+		struct platform_device *dev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __devinit
+admhc_adm5120_start(struct usb_hcd *hcd)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd (hcd);
+	int		ret;
+
+	ret = admhc_init(ahcd);
+	if (ret < 0) {
+		HCD_ERR("unable to init %s\n", hcd->self.bus_name);
+		goto err;
+	}
+
+	ret = admhc_run(ahcd);
+	if (ret < 0) {
+		HCD_ERR("unable to run %s\n", hcd->self.bus_name);
+		goto err_stop;
+	}
+
+	return 0;
+
+err_stop:
+	admhc_stop(hcd);
+err:
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver adm5120_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"ADM5120 built-in USB 1.1 Host Controller",
+	.hcd_priv_size =	sizeof(struct admhcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			admhc_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		admhc_adm5120_start,
+	.stop =			admhc_stop,
+	.shutdown =		admhc_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		admhc_urb_enqueue,
+	.urb_dequeue =		admhc_urb_dequeue,
+	.endpoint_disable =	admhc_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	admhc_get_frame_number,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	admhc_hub_status_data,
+	.hub_control =		admhc_hub_control,
+	.hub_irq_enable =	admhc_hub_irq_enable,
+#ifdef CONFIG_PM
+	.bus_suspend =		admhc_bus_suspend,
+	.bus_resume =		admhc_bus_resume,
+#endif
+	.start_port_reset =	admhc_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int usb_hcd_adm5120_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev);
+
+	return ret;
+}
+
+static int usb_hcd_adm5120_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	admhc_adm5120_remove(hcd, pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/* TODO */
+static int usb_hcd_adm5120_suspend(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	return 0;
+}
+
+static int usb_hcd_adm5120_resume(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	return 0;
+}
+#else
+#define usb_hcd_adm5120_suspend	NULL
+#define usb_hcd_adm5120_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver usb_hcd_adm5120_driver = {
+	.probe		= usb_hcd_adm5120_probe,
+	.remove		= usb_hcd_adm5120_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= usb_hcd_adm5120_suspend,
+	.resume		= usb_hcd_adm5120_resume,
+	.driver		= {
+		.name	= "adm5120-hcd",
+		.owner	= THIS_MODULE,
+	},
+};
+
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
new file mode 100644
index 000000000..c947a6c2d
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
@@ -0,0 +1,845 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-hcd.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *   [ Initialisation is based on Linus'  ]
+ *   [ uhci code and gregs ahcd fragments ]
+ *   [ (C) Copyright 1999 Linus Torvalds  ]
+ *   [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/reboot.h>
+#include <linux/debugfs.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include "../core/hcd.h"
+#include "../core/hub.h"
+
+#define DRIVER_VERSION	"0.25.0"
+#define DRIVER_AUTHOR	"Gabor Juhos <juhosg@openwrt.org>"
+#define DRIVER_DESC	"ADMtek USB 1.1 Host Controller Driver"
+
+/*-------------------------------------------------------------------------*/
+
+#undef ADMHC_VERBOSE_DEBUG	/* not always helpful */
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define	OHCI_CONTROL_INIT	OHCI_CTRL_CBSR
+
+#define	ADMHC_INTR_INIT \
+		( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
+		| ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
+
+/*-------------------------------------------------------------------------*/
+
+static const char hcd_name [] = "admhc-hcd";
+
+#define	STATECHANGE_DELAY	msecs_to_jiffies(300)
+
+#include "adm5120.h"
+
+static void admhc_dump(struct admhcd *ahcd, int verbose);
+static int admhc_init(struct admhcd *ahcd);
+static void admhc_stop(struct usb_hcd *hcd);
+
+#include "adm5120-dbg.c"
+#include "adm5120-mem.c"
+#include "adm5120-pm.c"
+#include "adm5120-hub.c"
+#include "adm5120-q.c"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * queue up an urb for anything except the root hub
+ */
+static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+	struct ed	*ed;
+	struct urb_priv	*urb_priv;
+	unsigned int	pipe = urb->pipe;
+	int		td_cnt = 0;
+	unsigned long	flags;
+	int		ret = 0;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	spin_lock_irqsave(&ahcd->lock, flags);
+	urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
+
+	/* every endpoint has an ed, locate and maybe (re)initialize it */
+	ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
+	if (!ed)
+		return -ENOMEM;
+
+	/* for the private part of the URB we need the number of TDs */
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		if (urb->transfer_buffer_length > TD_DATALEN_MAX)
+			/* td_submit_urb() doesn't yet handle these */
+			return -EMSGSIZE;
+
+		/* 1 TD for setup, 1 for ACK, plus ... */
+		td_cnt = 2;
+		/* FALLTHROUGH */
+	case PIPE_BULK:
+		/* one TD for every 4096 Bytes (can be upto 8K) */
+		td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
+		/* ... and for any remaining bytes ... */
+		if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
+			td_cnt++;
+		/* ... and maybe a zero length packet to wrap it up */
+		if (td_cnt == 0)
+			td_cnt++;
+		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+			&& (urb->transfer_buffer_length
+				% usb_maxpacket(urb->dev, pipe,
+					usb_pipeout (pipe))) == 0)
+			td_cnt++;
+		break;
+	case PIPE_INTERRUPT:
+		/*
+		 * for Interrupt IN/OUT transactions, each ED contains
+		 * only 1 TD.
+		 * TODO: check transfer_buffer_length?
+		 */
+		td_cnt = 1;
+		break;
+	case PIPE_ISOCHRONOUS:
+		/* number of packets from URB */
+		td_cnt = urb->number_of_packets;
+		break;
+	}
+
+	urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	urb_priv->ed = ed;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+	/* don't submit to a dead HC */
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		ret = -ENODEV;
+		goto fail;
+	}
+	if (!HC_IS_RUNNING(hcd->state)) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto fail;
+
+	/* schedule the ed if needed */
+	if (ed->state == ED_IDLE) {
+		ret = ed_schedule(ahcd, ed);
+		if (ret < 0) {
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			goto fail;
+		}
+		if (ed->type == PIPE_ISOCHRONOUS) {
+			u16	frame = admhc_frame_no(ahcd);
+
+			/* delay a few frames before the first TD */
+			frame += max_t (u16, 8, ed->interval);
+			frame &= ~(ed->interval - 1);
+			frame |= ed->branch;
+			urb->start_frame = frame;
+
+			/* yes, only URB_ISO_ASAP is supported, and
+			 * urb->start_frame is never used as input.
+			 */
+		}
+	} else if (ed->type == PIPE_ISOCHRONOUS)
+		urb->start_frame = ed->last_iso + ed->interval;
+
+	/* fill the TDs and link them to the ed; and
+	 * enable that part of the schedule, if needed
+	 * and update count of queued periodic urbs
+	 */
+	urb->hcpriv = urb_priv;
+	td_submit_urb(ahcd, urb);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
+#endif
+
+fail:
+	if (ret)
+		urb_priv_free(ahcd, urb_priv);
+
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+	return ret;
+}
+
+/*
+ * decouple the URB from the HC queues (TDs, urb_priv);
+ * reporting is always done
+ * asynchronously, and we might be dealing with an urb that's
+ * partially transferred, or an ED with other urbs being unlinked.
+ */
+static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	urb_print(ahcd, urb, "DEQUEUE", 1, status);
+#endif
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret) {
+		/* Do nothing */
+		;
+	} else if (HC_IS_RUNNING(hcd->state)) {
+		struct urb_priv *urb_priv;
+
+		/* Unless an IRQ completed the unlink while it was being
+		 * handed to us, flag it for unlink and giveback, and force
+		 * some upcoming INTR_SF to call finish_unlinks()
+		 */
+		urb_priv = urb->hcpriv;
+		if (urb_priv) {
+			if (urb_priv->ed->state == ED_OPER)
+				start_ed_unlink(ahcd, urb_priv->ed);
+		}
+	} else {
+		/*
+		 * with HC dead, we won't respect hc queue pointers
+		 * any more ... just clean up every urb's memory.
+		 */
+		if (urb->hcpriv)
+			finish_urb(ahcd, urb, status);
+	}
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* frees config/altsetting state for endpoints,
+ * including ED memory, dummy TD, and bulk/intr data toggle
+ */
+
+static void admhc_endpoint_disable(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct admhcd		*ahcd = hcd_to_admhcd(hcd);
+	unsigned long		flags;
+	struct ed		*ed = ep->hcpriv;
+	unsigned		limit = 1000;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+	if (!ed)
+		return;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	spin_lock_irqsave(&ahcd->lock, flags);
+	admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
+
+rescan:
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+	if (!HC_IS_RUNNING(hcd->state)) {
+sanitize:
+		ed->state = ED_IDLE;
+		finish_unlinks(ahcd, 0);
+	}
+
+	switch (ed->state) {
+	case ED_UNLINK:		/* wait for hw to finish? */
+		/* major IRQ delivery trouble loses INTR_SOFI too... */
+		if (limit-- == 0) {
+			admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
+			goto sanitize;
+		}
+		spin_unlock_irqrestore(&ahcd->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case ED_IDLE:		/* fully unlinked */
+		if (list_empty(&ed->td_list)) {
+			td_free (ahcd, ed->dummy);
+			ed_free (ahcd, ed);
+			break;
+		}
+		/* else FALL THROUGH */
+	default:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  can't recover; must leak ed.
+		 */
+		admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
+			ed, ep->desc.bEndpointAddress, ed->state,
+			list_empty(&ed->td_list) ? "" : " (has tds)");
+		td_free(ahcd, ed->dummy);
+		break;
+	}
+
+	ep->hcpriv = NULL;
+
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+	return;
+}
+
+static int admhc_get_frame_number(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+	return admhc_frame_no(ahcd);
+}
+
+static void admhc_usb_reset(struct admhcd *ahcd)
+{
+#if 0
+	ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+	ahcd->hc_control &= OHCI_CTRL_RWC;
+	admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
+#else
+	/* FIXME */
+	ahcd->host_control = ADMHC_BUSS_RESET;
+	admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
+#endif
+}
+
+/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
+ * other cases where the next software may expect clean state from the
+ * "firmware".  this is bus-neutral, unlike shutdown() methods.
+ */
+static void
+admhc_shutdown(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd;
+
+	ahcd = hcd_to_admhcd(hcd);
+	admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+	admhc_dma_disable(ahcd);
+	admhc_usb_reset(ahcd);
+	/* flush the writes */
+	admhc_writel_flush(ahcd);
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+static void admhc_eds_cleanup(struct admhcd *ahcd)
+{
+	if (ahcd->ed_tails[PIPE_INTERRUPT]) {
+		ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
+		ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
+	}
+
+	if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
+		ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
+		ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
+	}
+
+	if (ahcd->ed_tails[PIPE_CONTROL]) {
+		ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
+		ahcd->ed_tails[PIPE_CONTROL] = NULL;
+	}
+
+	if (ahcd->ed_tails[PIPE_BULK]) {
+		ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
+		ahcd->ed_tails[PIPE_BULK] = NULL;
+	}
+
+	ahcd->ed_head = NULL;
+}
+
+#define ED_DUMMY_INFO	(ED_SPEED_FULL | ED_SKIP)
+
+static int admhc_eds_init(struct admhcd *ahcd)
+{
+	struct ed *ed;
+
+	ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
+	if (!ed)
+		goto err;
+
+	ahcd->ed_tails[PIPE_INTERRUPT] = ed;
+
+	ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
+	if (!ed)
+		goto err;
+
+	ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
+	ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
+	ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
+	ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+	ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
+	if (!ed)
+		goto err;
+
+	ahcd->ed_tails[PIPE_CONTROL] = ed;
+	ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
+	ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
+	ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+	ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
+	if (!ed)
+		goto err;
+
+	ahcd->ed_tails[PIPE_BULK] = ed;
+	ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
+	ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
+	ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+	ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
+	admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
+	admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
+	admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
+#endif
+
+	return 0;
+
+err:
+	admhc_eds_cleanup(ahcd);
+	return -ENOMEM;
+}
+
+/* init memory, and kick BIOS/SMM off */
+
+static int admhc_init(struct admhcd *ahcd)
+{
+	struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
+	int ret;
+
+	admhc_disable(ahcd);
+	ahcd->regs = hcd->regs;
+
+	/* Disable HC interrupts */
+	admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+
+	/* Read the number of ports unless overridden */
+	if (ahcd->num_ports == 0)
+		ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
+
+	ret = admhc_mem_init(ahcd);
+	if (ret)
+		goto err;
+
+	/* init dummy endpoints */
+	ret = admhc_eds_init(ahcd);
+	if (ret)
+		goto err;
+
+	create_debug_files(ahcd);
+
+	return 0;
+
+err:
+	admhc_stop(hcd);
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * resets USB and controller
+ * enable interrupts
+ */
+static int admhc_run(struct admhcd *ahcd)
+{
+	u32			temp;
+	int			first = ahcd->fminterval == 0;
+	struct usb_hcd		*hcd = admhcd_to_hcd(ahcd);
+
+	admhc_disable(ahcd);
+
+	/* boot firmware should have set this up (5.1.1.3.1) */
+	if (first) {
+		temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
+		ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
+		if (ahcd->fminterval != FI)
+			admhc_dbg(ahcd, "fminterval delta %d\n",
+				ahcd->fminterval - FI);
+		ahcd->fminterval |=
+			(FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
+		/* also: power/overcurrent flags in rhdesc */
+	}
+
+#if 0	/* TODO: not applicable */
+	/* Reset USB nearly "by the book".  RemoteWakeupConnected was
+	 * saved if boot firmware (BIOS/SMM/...) told us it's connected,
+	 * or if bus glue did the same (e.g. for PCI add-in cards with
+	 * PCI PM support).
+	 */
+	if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0
+			&& !device_may_wakeup(hcd->self.controller))
+		device_init_wakeup(hcd->self.controller, 1);
+#endif
+
+	switch (ahcd->host_control & ADMHC_HC_BUSS) {
+	case ADMHC_BUSS_OPER:
+		temp = 0;
+		break;
+	case ADMHC_BUSS_SUSPEND:
+		/* FALLTHROUGH ? */
+	case ADMHC_BUSS_RESUME:
+		ahcd->host_control = ADMHC_BUSS_RESUME;
+		temp = 10 /* msec wait */;
+		break;
+	/* case ADMHC_BUSS_RESET: */
+	default:
+		ahcd->host_control = ADMHC_BUSS_RESET;
+		temp = 50 /* msec wait */;
+		break;
+	}
+	admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+
+	/* flush the writes */
+	admhc_writel_flush(ahcd);
+
+	msleep(temp);
+	temp = admhc_read_rhdesc(ahcd);
+	if (!(temp & ADMHC_RH_NPS)) {
+		/* power down each port */
+		for (temp = 0; temp < ahcd->num_ports; temp++)
+			admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
+	}
+	/* flush those writes */
+	admhc_writel_flush(ahcd);
+
+	/* 2msec timelimit here means no irqs/preempt */
+	spin_lock_irq(&ahcd->lock);
+
+	admhc_writel(ahcd, ADMHC_CTRL_SR,  &ahcd->regs->gencontrol);
+	temp = 30;	/* ... allow extra time */
+	while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
+		if (--temp == 0) {
+			spin_unlock_irq(&ahcd->lock);
+			admhc_err(ahcd, "USB HC reset timed out!\n");
+			return -1;
+		}
+		udelay(1);
+	}
+
+	/* enable HOST mode, before access any host specific register */
+	admhc_writel(ahcd, ADMHC_CTRL_UHFE,  &ahcd->regs->gencontrol);
+
+	/* Tell the controller where the descriptor list is */
+	admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
+
+	periodic_reinit(ahcd);
+
+	/* use rhsc irqs after khubd is fully initialized */
+	hcd->poll_rh = 1;
+	hcd->uses_new_polling = 1;
+
+#if 0
+	/* wake on ConnectStatusChange, matching external hubs */
+	admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
+#else
+	/* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
+#endif
+
+	/* Choose the interrupts we care about now, others later on demand */
+	admhc_intr_ack(ahcd, ~0);
+	admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
+
+	admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
+
+	/* flush those writes */
+	admhc_writel_flush(ahcd);
+
+	/* start controller operations */
+	ahcd->host_control = ADMHC_BUSS_OPER;
+	admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+
+	temp = 20;
+	while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+			& ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
+		if (--temp == 0) {
+			spin_unlock_irq(&ahcd->lock);
+			admhc_err(ahcd, "unable to setup operational mode!\n");
+			return -1;
+		}
+		mdelay(1);
+	}
+
+	hcd->state = HC_STATE_RUNNING;
+
+	ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+
+#if 0
+	/* FIXME: enabling DMA is always failed here for an unknown reason */
+	admhc_dma_enable(ahcd);
+
+	temp = 200;
+	while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+			& ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
+		if (--temp == 0) {
+			spin_unlock_irq(&ahcd->lock);
+			admhc_err(ahcd, "unable to enable DMA!\n");
+			admhc_dump(ahcd, 1);
+			return -1;
+		}
+		mdelay(1);
+	}
+
+#endif
+
+	spin_unlock_irq(&ahcd->lock);
+
+	mdelay(ADMHC_POTPGT);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static irqreturn_t admhc_irq(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+	struct admhcd_regs __iomem *regs = ahcd->regs;
+ 	u32 ints;
+
+	ints = admhc_readl(ahcd, &regs->int_status);
+	if ((ints & ADMHC_INTR_INTA) == 0) {
+		/* no unmasked interrupt status is set */
+		return IRQ_NONE;
+	}
+
+	ints &= admhc_readl(ahcd, &regs->int_enable);
+
+	if (ints & ADMHC_INTR_FATI) {
+		/* e.g. due to PCI Master/Target Abort */
+		admhc_disable(ahcd);
+		admhc_err(ahcd, "Fatal Error, controller disabled\n");
+		admhc_dump(ahcd, 1);
+		admhc_usb_reset(ahcd);
+	}
+
+	if (ints & ADMHC_INTR_BABI) {
+		admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
+		admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
+		admhc_err(ahcd, "Babble Detected\n");
+	}
+
+	if (ints & ADMHC_INTR_INSM) {
+		admhc_vdbg(ahcd, "Root Hub Status Change\n");
+		ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+		admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
+
+		/* NOTE: Vendors didn't always make the same implementation
+		 * choices for RHSC.  Many followed the spec; RHSC triggers
+		 * on an edge, like setting and maybe clearing a port status
+		 * change bit.  With others it's level-triggered, active
+		 * until khubd clears all the port status change bits.  We'll
+		 * always disable it here and rely on polling until khubd
+		 * re-enables it.
+		 */
+		admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
+		usb_hcd_poll_rh_status(hcd);
+	} else if (ints & ADMHC_INTR_RESI) {
+		/* For connect and disconnect events, we expect the controller
+		 * to turn on RHSC along with RD.  But for remote wakeup events
+		 * this might not happen.
+		 */
+		admhc_vdbg(ahcd, "Resume Detect\n");
+		admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
+		hcd->poll_rh = 1;
+		if (ahcd->autostop) {
+			spin_lock(&ahcd->lock);
+			admhc_rh_resume(ahcd);
+			spin_unlock(&ahcd->lock);
+		} else
+			usb_hcd_resume_root_hub(hcd);
+	}
+
+	if (ints & ADMHC_INTR_TDC) {
+		admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
+		admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
+		if (HC_IS_RUNNING(hcd->state))
+			admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
+		spin_lock(&ahcd->lock);
+		admhc_td_complete(ahcd);
+		spin_unlock(&ahcd->lock);
+		if (HC_IS_RUNNING(hcd->state))
+			admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
+	}
+
+	if (ints & ADMHC_INTR_SO) {
+		/* could track INTR_SO to reduce available PCI/... bandwidth */
+		admhc_vdbg(ahcd, "Schedule Overrun\n");
+	}
+
+#if 1
+	spin_lock(&ahcd->lock);
+	if (ahcd->ed_rm_list)
+		finish_unlinks(ahcd, admhc_frame_no(ahcd));
+
+	if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
+			&& HC_IS_RUNNING(hcd->state))
+		admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+	spin_unlock(&ahcd->lock);
+#else
+	if (ints & ADMHC_INTR_SOFI) {
+		admhc_vdbg(ahcd, "Start Of Frame\n");
+		spin_lock(&ahcd->lock);
+
+		/* handle any pending ED removes */
+		finish_unlinks(ahcd, admhc_frameno(ahcd));
+
+		/* leaving INTR_SOFI enabled when there's still unlinking
+		 * to be done in the (next frame).
+		 */
+		if ((ahcd->ed_rm_list == NULL) ||
+			HC_IS_RUNNING(hcd->state) == 0)
+			/*
+			 * disable INTR_SOFI if there are no unlinking to be
+			 * done (in the next frame)
+			 */
+			admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+
+		spin_unlock(&ahcd->lock);
+	}
+#endif
+
+	if (HC_IS_RUNNING(hcd->state)) {
+		admhc_intr_ack(ahcd, ints);
+		admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
+		admhc_writel_flush(ahcd);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void admhc_stop(struct usb_hcd *hcd)
+{
+	struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+	admhc_dump(ahcd, 1);
+
+	flush_scheduled_work();
+
+	admhc_usb_reset(ahcd);
+	admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+
+	free_irq(hcd->irq, hcd);
+	hcd->irq = -1;
+
+	remove_debug_files(ahcd);
+	admhc_eds_cleanup(ahcd);
+	admhc_mem_cleanup(ahcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ADM5120
+#include "adm5120-drv.c"
+#define PLATFORM_DRIVER		usb_hcd_adm5120_driver
+#endif
+
+#if	!defined(PLATFORM_DRIVER)
+#error "missing bus glue for admhc-hcd"
+#endif
+
+#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
+
+static int __init admhc_hcd_mod_init(void)
+{
+	int ret = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_INFO "\n", hcd_name);
+	pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
+		sizeof (struct ed), sizeof (struct td));
+
+#ifdef DEBUG
+	admhc_debug_root = debugfs_create_dir("admhc", NULL);
+	if (!admhc_debug_root) {
+		ret = -ENOENT;
+		goto error_debug;
+	}
+#endif
+
+#ifdef PLATFORM_DRIVER
+	ret = platform_driver_register(&PLATFORM_DRIVER);
+	if (ret < 0)
+		goto error_platform;
+#endif
+
+	return ret;
+
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+error_platform:
+#endif
+
+#ifdef DEBUG
+	debugfs_remove(admhc_debug_root);
+	admhc_debug_root = NULL;
+error_debug:
+#endif
+	return ret;
+}
+module_init(admhc_hcd_mod_init);
+
+static void __exit admhc_hcd_mod_exit(void)
+{
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#ifdef DEBUG
+	debugfs_remove(admhc_debug_root);
+#endif
+}
+module_exit(admhc_hcd_mod_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
new file mode 100644
index 000000000..6ba62050b
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
@@ -0,0 +1,441 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-hub.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ADM5120 Root Hub ... the nonsharable stuff
+ */
+
+#define dbg_port(hc,label,num,value) \
+	admhc_dbg(hc, \
+		"%s port%d " \
+		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+		label, num, value, \
+		(value & ADMHC_PS_PRSC) ? " PRSC" : "", \
+		(value & ADMHC_PS_OCIC) ? " OCIC" : "", \
+		(value & ADMHC_PS_PSSC) ? " PSSC" : "", \
+		(value & ADMHC_PS_PESC) ? " PESC" : "", \
+		(value & ADMHC_PS_CSC) ? " CSC" : "", \
+		\
+		(value & ADMHC_PS_LSDA) ? " LSDA" : "", \
+		(value & ADMHC_PS_PPS) ? " PPS" : "", \
+		(value & ADMHC_PS_PRS) ? " PRS" : "", \
+		(value & ADMHC_PS_POCI) ? " POCI" : "", \
+		(value & ADMHC_PS_PSS) ? " PSS" : "", \
+		\
+		(value & ADMHC_PS_PES) ? " PES" : "", \
+		(value & ADMHC_PS_CCS) ? " CCS" : "" \
+		);
+
+#define dbg_port_write(hc,label,num,value) \
+	admhc_dbg(hc, \
+		"%s port%d " \
+		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+		label, num, value, \
+		(value & ADMHC_PS_PRSC) ? " PRSC" : "", \
+		(value & ADMHC_PS_OCIC) ? " OCIC" : "", \
+		(value & ADMHC_PS_PSSC) ? " PSSC" : "", \
+		(value & ADMHC_PS_PESC) ? " PESC" : "", \
+		(value & ADMHC_PS_CSC) ? " CSC" : "", \
+		\
+		(value & ADMHC_PS_CPP) ? " CPP" : "", \
+		(value & ADMHC_PS_SPP) ? " SPP" : "", \
+		(value & ADMHC_PS_SPR) ? " SPR" : "", \
+		(value & ADMHC_PS_CPS) ? " CPS" : "", \
+		(value & ADMHC_PS_SPS) ? " SPS" : "", \
+		\
+		(value & ADMHC_PS_SPE) ? " SPE" : "", \
+		(value & ADMHC_PS_CPE) ? " CPE" : "" \
+		);
+
+/*-------------------------------------------------------------------------*/
+
+/* hcd->hub_irq_enable() */
+static void admhc_hub_irq_enable(struct usb_hcd *hcd)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+
+	spin_lock_irq(&ahcd->lock);
+	if (!ahcd->autostop)
+		del_timer(&hcd->rh_timer);	/* Prevent next poll */
+	admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
+	spin_unlock_irq(&ahcd->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+	int		i, changed = 0, length = 1;
+	int		any_connected = 0;
+	unsigned long	flags;
+	u32		status;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+		goto done;
+
+	/* init status */
+	status = admhc_read_rhdesc(ahcd);
+	if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
+		buf [0] = changed = 1;
+	else
+		buf [0] = 0;
+	if (ahcd->num_ports > 7) {
+		buf [1] = 0;
+		length++;
+	}
+
+	/* look at each port */
+	for (i = 0; i < ahcd->num_ports; i++) {
+		status = admhc_read_portstatus(ahcd, i);
+
+		/* can't autostop if ports are connected */
+		any_connected |= (status & ADMHC_PS_CCS);
+
+		if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
+				| ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
+			changed = 1;
+			if (i < 7)
+			    buf [0] |= 1 << (i + 1);
+			else
+			    buf [1] |= 1 << (i - 7);
+		}
+	}
+
+	hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
+			any_connected);
+
+done:
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	return changed ? length : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
+{
+	struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
+	u32 rh = admhc_read_rhdesc(ahcd);
+	u16 temp;
+
+	desc->bDescriptorType = USB_DT_HUB;	/* Hub-descriptor */
+	desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;	/* use default value */
+	desc->bHubContrCurrent = 0x00;		/* 0mA */
+
+	desc->bNbrPorts = ahcd->num_ports;
+	temp = 1 + (ahcd->num_ports / 8);
+	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+
+	/* FIXME */
+	temp = 0;
+	if (rh & ADMHC_RH_NPS)		/* no power switching? */
+	    temp |= 0x0002;
+	if (rh & ADMHC_RH_PSM)		/* per-port power switching? */
+	    temp |= 0x0001;
+	if (rh & ADMHC_RH_NOCP)		/* no overcurrent reporting? */
+	    temp |= 0x0010;
+	else if (rh & ADMHC_RH_OCPM)	/* per-port overcurrent reporting? */
+	    temp |= 0x0008;
+	desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
+
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	desc->bitmap[0] = 0;
+	desc->bitmap[0] = ~0;
+
+	return 0;
+}
+
+static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
+{
+	struct usb_hub_status *hs = (struct usb_hub_status *)buf;
+	u32 t = admhc_read_rhdesc(ahcd);
+	u16 status, change;
+
+	status = 0;
+	status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
+	status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
+
+	change = 0;
+	change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
+	change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
+
+	hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
+	hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
+
+	return 0;
+}
+
+static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
+{
+	struct usb_port_status *ps = (struct usb_port_status *)buf;
+	u32 t = admhc_read_portstatus(ahcd, port);
+	u16 status, change;
+
+	status = 0;
+	status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
+	status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
+	status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
+	status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
+	status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
+	status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
+	status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
+
+	change = 0;
+	change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
+	change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
+	change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
+	change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
+	change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
+
+	ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
+	ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+	u32			status;
+
+	if (!port)
+		return -EINVAL;
+	port--;
+
+	/* start port reset before HNP protocol times out */
+	status = admhc_read_portstatus(ahcd, port);
+	if (!(status & ADMHC_PS_CCS))
+		return -ENODEV;
+
+	/* khubd will finish the reset later */
+	admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
+	return 0;
+}
+
+static void start_hnp(struct admhcd *ahcd);
+
+#else
+
+#define	admhc_start_port_reset		NULL
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+
+/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
+ * not necessarily continuous ... to guard against resume signaling.
+ * The short timeout is safe for non-root hubs, and is backward-compatible
+ * with earlier Linux hosts.
+ */
+#ifdef	CONFIG_USB_SUSPEND
+#define	PORT_RESET_MSEC		50
+#else
+#define	PORT_RESET_MSEC		10
+#endif
+
+/* this timer value might be vendor-specific ... */
+#define	PORT_RESET_HW_MSEC	10
+
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+
+/* called from some task, normally khubd */
+static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
+{
+	u32 t;
+
+	admhc_vdbg(ahcd, "reset port%d\n", port);
+	t = admhc_read_portstatus(ahcd, port);
+	if (!(t & ADMHC_PS_CCS))
+		return -ENODEV;
+
+	admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
+	mdelay(10);
+	admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
+	mdelay(100);
+
+	return 0;
+}
+
+static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
+{
+	u32 t;
+
+	admhc_vdbg(ahcd, "enable port%d\n", port);
+	t = admhc_read_portstatus(ahcd, port);
+	if (!(t & ADMHC_PS_CCS))
+		return -ENODEV;
+
+	admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
+
+	return 0;
+}
+
+static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
+{
+	u32 t;
+
+	admhc_vdbg(ahcd, "disable port%d\n", port);
+	t = admhc_read_portstatus(ahcd, port);
+	if (!(t & ADMHC_PS_CCS))
+		return -ENODEV;
+
+	admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
+
+	return 0;
+}
+
+static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
+		u32 val)
+{
+#ifdef ADMHC_VERBOSE_DEBUG
+	dbg_port_write(ahcd, "write", port, val);
+#endif
+	admhc_write_portstatus(ahcd, port, val);
+
+	return 0;
+}
+
+static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+	int		ports = hcd_to_bus(hcd)->root_hub->maxchild;
+	int		ret = 0;
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+		return -ESHUTDOWN;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+#if 0			/* FIXME */
+			admhc_writel(ahcd, ADMHC_RH_OCIC,
+					&ahcd->regs->roothub.status);
+#endif
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			ret = admhc_port_disable(ahcd, wIndex);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
+			break;
+		case USB_PORT_FEAT_POWER:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		ret = admhc_get_hub_descriptor(ahcd, buf);
+		break;
+	case GetHubStatus:
+		ret = admhc_get_hub_status(ahcd, buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		ret = admhc_get_port_status(ahcd, wIndex, buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			/* FIXME:  this can be cleared, yes? */
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			ret = admhc_port_enable(ahcd, wIndex);
+			break;
+		case USB_PORT_FEAT_RESET:
+			ret = admhc_port_reset(ahcd, wIndex);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+#ifdef	CONFIG_USB_OTG
+			if (hcd->self.otg_port == (wIndex + 1)
+					&& hcd->self.b_hnp_enable)
+				start_hnp(ahcd);
+			else
+#endif
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
+			break;
+		case USB_PORT_FEAT_POWER:
+			ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		ret = -EPIPE;
+	}
+
+	return ret;
+}
+
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c
new file mode 100644
index 000000000..da50d42eb
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c
@@ -0,0 +1,202 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-mem.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OHCI deals with three types of memory:
+ *	- data used only by the HCD ... kmalloc is fine
+ *	- async and periodic schedules, shared by HC and HCD ... these
+ *	  need to use dma_pool or dma_alloc_coherent
+ *	- driver buffers, read/written by HC ... the hcd glue or the
+ *	  device driver provides us with dma addresses
+ *
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+static void admhc_hcd_init(struct admhcd *ahcd)
+{
+	ahcd->next_statechange = jiffies;
+	spin_lock_init(&ahcd->lock);
+	INIT_LIST_HEAD(&ahcd->pending);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int admhc_mem_init(struct admhcd *ahcd)
+{
+	ahcd->td_cache = dma_pool_create("admhc_td",
+		admhcd_to_hcd(ahcd)->self.controller,
+		sizeof(struct td),
+		TD_ALIGN, /* byte alignment */
+		0 /* no page-crossing issues */
+		);
+	if (!ahcd->td_cache)
+		goto err;
+
+	ahcd->ed_cache = dma_pool_create("admhc_ed",
+		admhcd_to_hcd(ahcd)->self.controller,
+		sizeof(struct ed),
+		ED_ALIGN, /* byte alignment */
+		0 /* no page-crossing issues */
+		);
+	if (!ahcd->ed_cache)
+		goto err_td_cache;
+
+	return 0;
+
+err_td_cache:
+	dma_pool_destroy(ahcd->td_cache);
+	ahcd->td_cache = NULL;
+err:
+	return -ENOMEM;
+}
+
+static void admhc_mem_cleanup(struct admhcd *ahcd)
+{
+	if (ahcd->td_cache) {
+		dma_pool_destroy(ahcd->td_cache);
+		ahcd->td_cache = NULL;
+	}
+
+	if (ahcd->ed_cache) {
+		dma_pool_destroy(ahcd->ed_cache);
+		ahcd->ed_cache = NULL;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ahcd "done list" processing needs this mapping */
+static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma)
+{
+	struct td *td;
+
+	td_dma &= TD_MASK;
+	td = ahcd->td_hash[TD_HASH_FUNC(td_dma)];
+	while (td && td->td_dma != td_dma)
+		td = td->td_hash;
+
+	return td;
+}
+
+/* TDs ... */
+static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags)
+{
+	dma_addr_t	dma;
+	struct td	*td;
+
+	td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma);
+	if (!td)
+		return NULL;
+
+	/* in case ahcd fetches it, make it look dead */
+	memset(td, 0, sizeof *td);
+	td->hwNextTD = cpu_to_hc32(ahcd, dma);
+	td->td_dma = dma;
+	/* hashed in td_fill */
+
+	return td;
+}
+
+static void td_free(struct admhcd *ahcd, struct td *td)
+{
+	struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)];
+
+	while (*prev && *prev != td)
+		prev = &(*prev)->td_hash;
+	if (*prev)
+		*prev = td->td_hash;
+#if 0
+	/* TODO: remove */
+	else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
+		admhc_dbg (ahcd, "no hash for td %p\n", td);
+#else
+	else if ((td->flags & TD_FLAG_DONE) != 0)
+		admhc_dbg (ahcd, "no hash for td %p\n", td);
+#endif
+	dma_pool_free(ahcd->td_cache, td, td->td_dma);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EDs ... */
+static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags)
+{
+	dma_addr_t	dma;
+	struct ed	*ed;
+
+	ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma);
+	if (!ed)
+		return NULL;
+
+	memset(ed, 0, sizeof(*ed));
+	ed->dma = dma;
+
+	INIT_LIST_HEAD(&ed->td_list);
+	INIT_LIST_HEAD(&ed->urb_list);
+
+	return ed;
+}
+
+static void ed_free(struct admhcd *ahcd, struct ed *ed)
+{
+	dma_pool_free(ahcd->ed_cache, ed, ed->dma);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* URB priv ... */
+static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv)
+{
+	int i;
+
+	for (i = 0; i < urb_priv->td_cnt; i++)
+		if (urb_priv->td[i])
+			td_free(ahcd, urb_priv->td[i]);
+
+	list_del(&urb_priv->pending);
+	kfree(urb_priv);
+}
+
+static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds,
+		gfp_t mem_flags)
+{
+	struct urb_priv	*priv;
+
+	/* allocate the private part of the URB */
+	priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags);
+	if (!priv)
+		goto err;
+
+	/* allocate the TDs (deferring hash chain updates) */
+	for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) {
+		priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags);
+		if (priv->td[priv->td_cnt] == NULL)
+			goto err_free;
+	}
+
+	INIT_LIST_HEAD(&priv->pending);
+
+	return priv;
+
+err_free:
+	urb_priv_free(ahcd, priv);
+err:
+	return NULL;
+}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
new file mode 100644
index 000000000..9d49664cb
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
@@ -0,0 +1,445 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from fragments of the OHCI driver.
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#define OHCI_SCHED_ENABLES \
+	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
+
+#ifdef	CONFIG_PM
+static int admhc_restart(struct admhcd *ahcd);
+
+static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
+__releases(ahcd->lock)
+__acquires(ahcd->lock)
+{
+	int			status = 0;
+
+	ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+	switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_RESUME:
+		admhc_dbg(ahcd, "resume/suspend?\n");
+		ahcd->hc_control &= ~OHCI_CTRL_HCFS;
+		ahcd->hc_control |= OHCI_USB_RESET;
+		admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+		(void) admhc_readl(ahcd, &ahcd->regs->control);
+		/* FALL THROUGH */
+	case OHCI_USB_RESET:
+		status = -EBUSY;
+		admhc_dbg(ahcd, "needs reinit!\n");
+		goto done;
+	case OHCI_USB_SUSPEND:
+		if (!ahcd->autostop) {
+			admhc_dbg(ahcd, "already suspended\n");
+			goto done;
+		}
+	}
+	admhc_dbg(ahcd, "%s root hub\n",
+			autostop ? "auto-stop" : "suspend");
+
+	/* First stop any processing */
+	if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
+		ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
+		admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+		ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+		admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
+
+		/* sched disables take effect on the next frame,
+		 * then the last WDH could take 6+ msec
+		 */
+		admhc_dbg(ahcd, "stopping schedules ...\n");
+		ahcd->autostop = 0;
+		spin_unlock_irq (&ahcd->lock);
+		msleep (8);
+		spin_lock_irq(&ahcd->lock);
+	}
+	dl_done_list (ahcd);
+	finish_unlinks (ahcd, admhc_frame_no(ahcd));
+
+	/* maybe resume can wake root hub */
+	if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
+			autostop)
+		ahcd->hc_control |= OHCI_CTRL_RWE;
+	else {
+		admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
+		ahcd->hc_control &= ~OHCI_CTRL_RWE;
+	}
+
+	/* Suspend hub ... this is the "global (to this bus) suspend" mode,
+	 * which doesn't imply ports will first be individually suspended.
+	 */
+	ahcd->hc_control &= ~OHCI_CTRL_HCFS;
+	ahcd->hc_control |= OHCI_USB_SUSPEND;
+	admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+	(void) admhc_readl(ahcd, &ahcd->regs->control);
+
+	/* no resumes until devices finish suspending */
+	if (!autostop) {
+		ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
+		ahcd->autostop = 0;
+	}
+
+done:
+	return status;
+}
+
+static inline struct ed *find_head(struct ed *ed)
+{
+	/* for bulk and control lists */
+	while (ed->ed_prev)
+		ed = ed->ed_prev;
+	return ed;
+}
+
+/* caller has locked the root hub */
+static int admhc_rh_resume(struct admhcd *ahcd)
+__releases(ahcd->lock)
+__acquires(ahcd->lock)
+{
+	struct usb_hcd		*hcd = admhcd_to_hcd (ahcd);
+	u32			temp, enables;
+	int			status = -EINPROGRESS;
+	int			autostopped = ahcd->autostop;
+
+	ahcd->autostop = 0;
+	ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+
+	if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+		/* this can happen after resuming a swsusp snapshot */
+		if (hcd->state == HC_STATE_RESUMING) {
+			admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
+					ahcd->hc_control);
+			status = -EBUSY;
+		/* this happens when pmcore resumes HC then root */
+		} else {
+			admhc_dbg(ahcd, "duplicate resume\n");
+			status = 0;
+		}
+	} else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_SUSPEND:
+		ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
+		ahcd->hc_control |= OHCI_USB_RESUME;
+		admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+		(void) admhc_readl(ahcd, &ahcd->regs->control);
+		admhc_dbg(ahcd, "%s root hub\n",
+				autostopped ? "auto-start" : "resume");
+		break;
+	case OHCI_USB_RESUME:
+		/* HCFS changes sometime after INTR_RD */
+		admhc_dbg(ahcd, "%swakeup root hub\n",
+				autostopped ? "auto-" : "");
+		break;
+	case OHCI_USB_OPER:
+		/* this can happen after resuming a swsusp snapshot */
+		admhc_dbg(ahcd, "snapshot resume? reinit\n");
+		status = -EBUSY;
+		break;
+	default:		/* RESET, we lost power */
+		admhc_dbg(ahcd, "lost power\n");
+		status = -EBUSY;
+	}
+	if (status == -EBUSY) {
+		if (!autostopped) {
+			spin_unlock_irq (&ahcd->lock);
+			(void) ahcd_init (ahcd);
+			status = admhc_restart (ahcd);
+			spin_lock_irq(&ahcd->lock);
+		}
+		return status;
+	}
+	if (status != -EINPROGRESS)
+		return status;
+	if (autostopped)
+		goto skip_resume;
+	spin_unlock_irq (&ahcd->lock);
+
+	/* Some controllers (lucent erratum) need extra-long delays */
+	msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
+
+	temp = admhc_readl(ahcd, &ahcd->regs->control);
+	temp &= OHCI_CTRL_HCFS;
+	if (temp != OHCI_USB_RESUME) {
+		admhc_err (ahcd, "controller won't resume\n");
+		spin_lock_irq(&ahcd->lock);
+		return -EBUSY;
+	}
+
+	/* disable old schedule state, reinit from scratch */
+	admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
+	admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
+	admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
+	admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
+	admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
+	admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
+
+	/* Sometimes PCI D3 suspend trashes frame timings ... */
+	periodic_reinit(ahcd);
+
+	/* the following code is executed with ahcd->lock held and
+	 * irqs disabled if and only if autostopped is true
+	 */
+
+skip_resume:
+	/* interrupts might have been disabled */
+	admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
+	if (ahcd->ed_rm_list)
+		admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
+
+	/* Then re-enable operations */
+	admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
+	(void) admhc_readl(ahcd, &ahcd->regs->control);
+	if (!autostopped)
+		msleep (3);
+
+	temp = ahcd->hc_control;
+	temp &= OHCI_CTRL_RWC;
+	temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ahcd->hc_control = temp;
+	admhc_writel(ahcd, temp, &ahcd->regs->control);
+	(void) admhc_readl(ahcd, &ahcd->regs->control);
+
+	/* TRSMRCY */
+	if (!autostopped) {
+		msleep (10);
+		spin_lock_irq(&ahcd->lock);
+	}
+	/* now ahcd->lock is always held and irqs are always disabled */
+
+	/* keep it alive for more than ~5x suspend + resume costs */
+	ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+
+	/* maybe turn schedules back on */
+	enables = 0;
+	temp = 0;
+	if (!ahcd->ed_rm_list) {
+		if (ahcd->ed_controltail) {
+			admhc_writel(ahcd,
+					find_head (ahcd->ed_controltail)->dma,
+					&ahcd->regs->ed_controlhead);
+			enables |= OHCI_CTRL_CLE;
+			temp |= OHCI_CLF;
+		}
+		if (ahcd->ed_bulktail) {
+			admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
+				&ahcd->regs->ed_bulkhead);
+			enables |= OHCI_CTRL_BLE;
+			temp |= OHCI_BLF;
+		}
+	}
+	if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
+		enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
+	if (enables) {
+		admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
+		ahcd->hc_control |= enables;
+		admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+		if (temp)
+			admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
+		(void) admhc_readl(ahcd, &ahcd->regs->control);
+	}
+
+	return 0;
+}
+
+static int admhc_bus_suspend(struct usb_hcd *hcd)
+{
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
+	int		rc;
+
+	spin_lock_irq(&ahcd->lock);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+		rc = -ESHUTDOWN;
+	else
+		rc = admhc_rh_suspend(ahcd, 0);
+	spin_unlock_irq(&ahcd->lock);
+	return rc;
+}
+
+static int admhc_bus_resume(struct usb_hcd *hcd)
+{
+	struct admhcd		*ahcd = hcd_to_admhcd(hcd);
+	int			rc;
+
+	if (time_before(jiffies, ahcd->next_statechange))
+		msleep(5);
+
+	spin_lock_irq(&ahcd->lock);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+		rc = -ESHUTDOWN;
+	else
+		rc = admhc_rh_resume(ahcd);
+	spin_unlock_irq(&ahcd->lock);
+
+	/* poll until we know a device is connected or we autostop */
+	if (rc == 0)
+		usb_hcd_poll_rh_status(hcd);
+	return rc;
+}
+
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
+		int any_connected)
+{
+	int	poll_rh = 1;
+
+	switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+
+	case OHCI_USB_OPER:
+		/* keep on polling until we know a device is connected
+		 * and RHSC is enabled */
+		if (!ahcd->autostop) {
+			if (any_connected ||
+					!device_may_wakeup(&admhcd_to_hcd(ahcd)
+						->self.root_hub->dev)) {
+				if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
+						OHCI_INTR_RHSC)
+					poll_rh = 0;
+			} else {
+				ahcd->autostop = 1;
+				ahcd->next_statechange = jiffies + HZ;
+			}
+
+		/* if no devices have been attached for one second, autostop */
+		} else {
+			if (changed || any_connected) {
+				ahcd->autostop = 0;
+				ahcd->next_statechange = jiffies +
+						STATECHANGE_DELAY;
+			} else if (time_after_eq(jiffies,
+						ahcd->next_statechange)
+					&& !ahcd->ed_rm_list
+					&& !(ahcd->hc_control &
+						OHCI_SCHED_ENABLES)) {
+				ahcd_rh_suspend(ahcd, 1);
+			}
+		}
+		break;
+
+	/* if there is a port change, autostart or ask to be resumed */
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		if (changed) {
+			if (ahcd->autostop)
+				admhc_rh_resume(ahcd);
+			else
+				usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
+		} else {
+			/* everything is idle, no need for polling */
+			poll_rh = 0;
+		}
+		break;
+	}
+	return poll_rh;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* must not be called from interrupt context */
+static int admhc_restart(struct admhcd *ahcd)
+{
+	int temp;
+	int i;
+	struct urb_priv *priv;
+
+	/* mark any devices gone, so they do nothing till khubd disconnects.
+	 * recycle any "live" eds/tds (and urbs) right away.
+	 * later, khubd disconnect processing will recycle the other state,
+	 * (either as disconnect/reconnect, or maybe someday as a reset).
+	 */
+	spin_lock_irq(&ahcd->lock);
+	admhc_disable(ahcd);
+	usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
+	if (!list_empty(&ahcd->pending))
+		admhc_dbg(ahcd, "abort schedule...\n");
+		list_for_each_entry(priv, &ahcd->pending, pending) {
+		struct urb	*urb = priv->td[0]->urb;
+		struct ed	*ed = priv->ed;
+
+		switch (ed->state) {
+		case ED_OPER:
+			ed->state = ED_UNLINK;
+			ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
+			ed_deschedule (ahcd, ed);
+
+			ed->ed_next = ahcd->ed_rm_list;
+			ed->ed_prev = NULL;
+			ahcd->ed_rm_list = ed;
+			/* FALLTHROUGH */
+		case ED_UNLINK:
+			break;
+		default:
+			admhc_dbg(ahcd, "bogus ed %p state %d\n",
+					ed, ed->state);
+		}
+
+		if (!urb->unlinked)
+			urb->unlinked = -ESHUTDOWN;
+	}
+	finish_unlinks(ahcd, 0);
+	spin_unlock_irq(&ahcd->lock);
+
+	/* paranoia, in case that didn't work: */
+
+	/* empty the interrupt branches */
+	for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
+	for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
+
+	/* no EDs to remove */
+	ahcd->ed_rm_list = NULL;
+
+	/* empty control and bulk lists */
+	ahcd->ed_controltail = NULL;
+	ahcd->ed_bulktail    = NULL;
+
+	if ((temp = admhc_run(ahcd)) < 0) {
+		admhc_err(ahcd, "can't restart, %d\n", temp);
+		return temp;
+	} else {
+		/* here we "know" root ports should always stay powered,
+		 * and that if we try to turn them back on the root hub
+		 * will respond to CSC processing.
+		 */
+		i = ahcd->num_ports;
+		while (i--)
+			admhc_writel(ahcd, RH_PS_PSS,
+				&ahcd->regs->portstatus[i]);
+		admhc_dbg(ahcd, "restart complete\n");
+	}
+	return 0;
+}
+
+#else	/* CONFIG_PM */
+
+static inline int admhc_rh_resume(struct admhcd *ahcd)
+{
+	return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
+		int any_connected)
+{
+	int	poll_rh = 1;
+
+	/* keep on polling until RHSC is enabled */
+	if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
+		poll_rh = 0;
+
+	return poll_rh;
+}
+
+#endif	/* CONFIG_PM */
+
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
new file mode 100644
index 000000000..4c742c0f3
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
@@ -0,0 +1,955 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-q.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/irq.h>
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * URB goes back to driver, and isn't reissued.
+ * It's completely gone from HC data structures.
+ * PRECONDITION:  ahcd lock held, irqs blocked.
+ */
+static void
+finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
+__releases(ahcd->lock)
+__acquires(ahcd->lock)
+{
+	urb_priv_free(ahcd, urb->hcpriv);
+
+	if (likely(status == -EINPROGRESS))
+		status = 0;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_ISOCHRONOUS:
+		admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
+		break;
+	case PIPE_INTERRUPT:
+		admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
+		break;
+	}
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
+#endif
+
+	/* urb->complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
+	spin_unlock(&ahcd->lock);
+	usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
+	spin_lock(&ahcd->lock);
+}
+
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+#if 0	/* FIXME */
+/* search for the right schedule branch to use for a periodic ed.
+ * does some load balancing; returns the branch, or negative errno.
+ */
+static int balance(struct admhcd *ahcd, int interval, int load)
+{
+	int	i, branch = -ENOSPC;
+
+	/* iso periods can be huge; iso tds specify frame numbers */
+	if (interval > NUM_INTS)
+		interval = NUM_INTS;
+
+	/* search for the least loaded schedule branch of that period
+	 * that has enough bandwidth left unreserved.
+	 */
+	for (i = 0; i < interval ; i++) {
+		if (branch < 0 || ahcd->load [branch] > ahcd->load [i]) {
+			int	j;
+
+			/* usb 1.1 says 90% of one frame */
+			for (j = i; j < NUM_INTS; j += interval) {
+				if ((ahcd->load [j] + load) > 900)
+					break;
+			}
+			if (j < NUM_INTS)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if 0	/* FIXME */
+/* both iso and interrupt requests have periods; this routine puts them
+ * into the schedule tree in the apppropriate place.  most iso devices use
+ * 1msec periods, but that's not required.
+ */
+static void periodic_link (struct admhcd *ahcd, struct ed *ed)
+{
+	unsigned	i;
+
+	admhc_vdbg (ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
+		(ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
+		ed, ed->branch, ed->load, ed->interval);
+
+	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
+		struct ed	**prev = &ahcd->periodic [i];
+		__hc32		*prev_p = &ahcd->hcca->int_table [i];
+		struct ed	*here = *prev;
+
+		/* sorting each branch by period (slow before fast)
+		 * lets us share the faster parts of the tree.
+		 * (plus maybe: put interrupt eds before iso)
+		 */
+		while (here && ed != here) {
+			if (ed->interval > here->interval)
+				break;
+			prev = &here->ed_next;
+			prev_p = &here->hwNextED;
+			here = *prev;
+		}
+		if (ed != here) {
+			ed->ed_next = here;
+			if (here)
+				ed->hwNextED = *prev_p;
+			wmb ();
+			*prev = ed;
+			*prev_p = cpu_to_hc32(ahcd, ed->dma);
+			wmb();
+		}
+		ahcd->load [i] += ed->load;
+	}
+	admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
+}
+#endif
+
+/* link an ed into the HC chain */
+
+static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
+{
+	struct ed *old_tail;
+
+	if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
+		return -EAGAIN;
+
+	ed->state = ED_OPER;
+
+	old_tail = ahcd->ed_tails[ed->type];
+
+	ed->ed_next = old_tail->ed_next;
+	if (ed->ed_next) {
+		ed->ed_next->ed_prev = ed;
+		ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
+	}
+	ed->ed_prev = old_tail;
+
+	old_tail->ed_next = ed;
+	old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+	ahcd->ed_tails[ed->type] = ed;
+
+	admhc_dma_enable(ahcd);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if 0	/* FIXME */
+/* scan the periodic table to find and unlink this ED */
+static void periodic_unlink (struct admhcd *ahcd, struct ed *ed)
+{
+	int	i;
+
+	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
+		struct ed	*temp;
+		struct ed	**prev = &ahcd->periodic [i];
+		__hc32		*prev_p = &ahcd->hcca->int_table [i];
+
+		while (*prev && (temp = *prev) != ed) {
+			prev_p = &temp->hwNextED;
+			prev = &temp->ed_next;
+		}
+		if (*prev) {
+			*prev_p = ed->hwNextED;
+			*prev = ed->ed_next;
+		}
+		ahcd->load [i] -= ed->load;
+	}
+
+	admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
+	admhc_vdbg (ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
+		(ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
+		ed, ed->branch, ed->load, ed->interval);
+}
+#endif
+
+/* unlink an ed from the HC chain.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed
+ * (assuming it already started that, which needn't be true).
+ *
+ * ED_UNLINK is a transient state: the HC may still see this ED, but soon
+ * it won't.  ED_SKIP means the HC will finish its current transaction,
+ * but won't start anything new.  The TD queue may still grow; device
+ * drivers don't know about this HCD-internal state.
+ *
+ * When the HC can't see the ED, something changes ED_UNLINK to one of:
+ *
+ *  - ED_OPER: when there's any request queued, the ED gets rescheduled
+ *    immediately.  HC should be working on them.
+ *
+ *  - ED_IDLE:  when there's no TD queue. there's no reason for the HC
+ *    to care about this ED; safe to disable the endpoint.
+ *
+ * When finish_unlinks() runs later, after SOF interrupt, it will often
+ * complete one or more URB unlinks before making that state change.
+ */
+static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
+{
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1);
+#endif
+
+	ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
+	wmb();
+	ed->state = ED_UNLINK;
+
+	/* remove this ED from the HC list */
+	ed->ed_prev->hwNextED = ed->hwNextED;
+
+	/* and remove it from our list also */
+	ed->ed_prev->ed_next = ed->ed_next;
+
+	if (ed->ed_next)
+		ed->ed_next->ed_prev = ed->ed_prev;
+
+	if (ahcd->ed_tails[ed->type] == ed)
+		ahcd->ed_tails[ed->type] = ed->ed_prev;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
+{
+	struct ed *ed;
+	struct td *td;
+
+	ed = ed_alloc(ahcd, GFP_ATOMIC);
+	if (!ed)
+		goto err;
+
+	/* dummy td; end of td list for this ed */
+	td = td_alloc(ahcd, GFP_ATOMIC);
+	if (!td)
+		goto err_free_ed;
+
+	switch (type) {
+	case PIPE_INTERRUPT:
+		info |= ED_INT;
+		break;
+	case PIPE_ISOCHRONOUS:
+		info |= ED_ISO;
+		break;
+	}
+
+	ed->dummy = td;
+	ed->state = ED_IDLE;
+	ed->type = type;
+
+	ed->hwINFO = cpu_to_hc32(ahcd, info);
+	ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
+	ed->hwHeadP = ed->hwTailP;	/* ED_C, ED_H zeroed */
+
+	return ed;
+
+err_free_ed:
+	ed_free(ahcd, ed);
+err:
+	return NULL;
+}
+
+/* get and maybe (re)init an endpoint. init _should_ be done only as part
+ * of enumeration, usb_set_configuration() or usb_set_interface().
+ */
+static struct ed *ed_get(struct admhcd *ahcd,	struct usb_host_endpoint *ep,
+	struct usb_device *udev, unsigned int pipe, int interval)
+{
+	struct ed		*ed;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ahcd->lock, flags);
+
+	ed = ep->hcpriv;
+	if (!ed) {
+		u32		info;
+
+		/* FIXME: usbcore changes dev->devnum before SET_ADDRESS
+		 * suceeds ... otherwise we wouldn't need "pipe".
+		 */
+		info = usb_pipedevice(pipe);
+		info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
+		info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
+		if (udev->speed == USB_SPEED_FULL)
+			info |= ED_SPEED_FULL;
+
+		ed = ed_create(ahcd, usb_pipetype(pipe), info);
+		if (ed)
+			ep->hcpriv = ed;
+	}
+
+	spin_unlock_irqrestore(&ahcd->lock, flags);
+
+	return ed;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* request unlinking of an endpoint from an operational HC.
+ * put the ep on the rm_list
+ * real work is done at the next start frame (SOFI) hardware interrupt
+ * caller guarantees HCD is running, so hardware access is safe,
+ * and that ed->state is ED_OPER
+ */
+static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed)
+{
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1);
+#endif
+
+	ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
+	ed_deschedule(ahcd, ed);
+
+	/* add this ED into the remove list */
+	ed->ed_rm_next = ahcd->ed_rm_list;
+	ahcd->ed_rm_list = ed;
+
+	/* enable SOF interrupt */
+	admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
+	admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
+	/* flush those writes */
+	admhc_writel_flush(ahcd);
+
+	/* SOF interrupt might get delayed; record the frame counter value that
+	 * indicates when the HC isn't looking at it, so concurrent unlinks
+	 * behave.  frame_no wraps every 2^16 msec, and changes right before
+	 * SOF is triggered.
+	 */
+	ed->tick = admhc_frame_no(ahcd) + 1;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void
+td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
+	struct urb *urb, int index)
+{
+	struct td		*td, *td_pt;
+	struct urb_priv		*urb_priv = urb->hcpriv;
+	int			hash;
+	u32			cbl = 0;
+
+#if 1
+	if (index == (urb_priv->td_cnt - 1) &&
+			((urb->transfer_flags & URB_NO_INTERRUPT) == 0))
+		cbl |= TD_IE;
+#else
+	if (index == (urb_priv->td_cnt - 1))
+		cbl |= TD_IE;
+#endif
+
+	/* use this td as the next dummy */
+	td_pt = urb_priv->td[index];
+
+	/* fill the old dummy TD */
+	td = urb_priv->td[index] = urb_priv->ed->dummy;
+	urb_priv->ed->dummy = td_pt;
+
+	td->ed = urb_priv->ed;
+	td->next_dl_td = NULL;
+	td->index = index;
+	td->urb = urb;
+	td->data_dma = data;
+	if (!len)
+		data = 0;
+
+	if (data)
+		cbl |= (len & TD_BL_MASK);
+
+	info |= TD_OWN;
+
+	/* setup hardware specific fields */
+	td->hwINFO = cpu_to_hc32(ahcd, info);
+	td->hwDBP = cpu_to_hc32(ahcd, data);
+	td->hwCBL = cpu_to_hc32(ahcd, cbl);
+	td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma);
+
+	/* append to queue */
+	list_add_tail(&td->td_list, &td->ed->td_list);
+
+	/* hash it for later reverse mapping */
+	hash = TD_HASH_FUNC(td->td_dma);
+	td->td_hash = ahcd->td_hash[hash];
+	ahcd->td_hash[hash] = td;
+
+	/* HC might read the TD (or cachelines) right away ... */
+	wmb();
+	td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare all TDs of a transfer, and queue them onto the ED.
+ * Caller guarantees HC is active.
+ * Usually the ED is already on the schedule, so TDs might be
+ * processed as soon as they're queued.
+ */
+static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
+{
+	struct urb_priv	*urb_priv = urb->hcpriv;
+	dma_addr_t	data;
+	int		data_len = urb->transfer_buffer_length;
+	int		cnt = 0;
+	u32		info = 0;
+	int		is_out = usb_pipeout(urb->pipe);
+	u32		toggle = 0;
+
+	/* OHCI handles the bulk/interrupt data toggles itself.  We just
+	 * use the device toggle bits for resetting, and rely on the fact
+	 * that resetting toggle is meaningless if the endpoint is active.
+	 */
+
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
+		toggle = TD_T_CARRY;
+	} else {
+		toggle = TD_T_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
+			is_out, 1);
+	}
+
+	urb_priv->td_idx = 0;
+	list_add(&urb_priv->pending, &ahcd->pending);
+
+	if (data_len)
+		data = urb->transfer_dma;
+	else
+		data = 0;
+
+	/* NOTE:  TD_CC is set so we can tell which TDs the HC processed by
+	 * using TD_CC_GET, as well as by seeing them on the done list.
+	 * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
+	 */
+	switch (urb_priv->ed->type) {
+	case PIPE_INTERRUPT:
+		info = is_out
+			? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
+			: TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
+
+		/* setup service interval and starting frame number */
+		info |= (urb->start_frame & TD_FN_MASK);
+		info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
+
+		td_fill(ahcd, info, data, data_len, urb, cnt);
+		cnt++;
+
+		admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
+		break;
+
+	case PIPE_BULK:
+		info = is_out
+			? TD_SCC_NOTACCESSED | TD_DP_OUT
+			: TD_SCC_NOTACCESSED | TD_DP_IN;
+
+		/* TDs _could_ transfer up to 8K each */
+		while (data_len > TD_DATALEN_MAX) {
+			td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
+				data, TD_DATALEN_MAX, urb, cnt);
+			data += TD_DATALEN_MAX;
+			data_len -= TD_DATALEN_MAX;
+			cnt++;
+		}
+
+		td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
+			data_len, urb, cnt);
+		cnt++;
+
+		if ((urb->transfer_flags & URB_ZERO_PACKET)
+				&& (cnt < urb_priv->td_cnt)) {
+			td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
+				0, 0, urb, cnt);
+			cnt++;
+		}
+		break;
+
+	/* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
+	 * any DATA phase works normally, and the STATUS ack is special.
+	 */
+	case PIPE_CONTROL:
+		/* fill a TD for the setup */
+		info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
+		td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++);
+
+		if (data_len > 0) {
+			/* fill a TD for the data */
+			info = TD_SCC_NOTACCESSED | TD_T_DATA1;
+			info |= is_out ? TD_DP_OUT : TD_DP_IN;
+			/* NOTE:  mishandles transfers >8K, some >4K */
+			td_fill(ahcd, info, data, data_len, urb, cnt++);
+		}
+
+		/* fill a TD for the ACK */
+		info = (is_out || data_len == 0)
+			? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
+			: TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
+		td_fill(ahcd, info, data, 0, urb, cnt++);
+
+		break;
+
+	/* ISO has no retransmit, so no toggle;
+	 * Each TD could handle multiple consecutive frames (interval 1);
+	 * we could often reduce the number of TDs here.
+	 */
+	case PIPE_ISOCHRONOUS:
+		info = is_out
+			? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
+			: TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
+
+		for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+			int frame = urb->start_frame;
+
+			frame += cnt * urb->interval;
+			frame &= TD_FN_MASK;
+			td_fill(ahcd, info | frame,
+				data + urb->iso_frame_desc[cnt].offset,
+				urb->iso_frame_desc[cnt].length, urb, cnt);
+		}
+		admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
+		break;
+	}
+
+	if (urb_priv->td_cnt != cnt)
+		admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+/* calculate transfer length/status and update the urb */
+static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
+{
+	struct urb_priv *urb_priv = urb->hcpriv;
+	u32	info;
+	u32	bl;
+	u32	tdDBP;
+	int	type = usb_pipetype(urb->pipe);
+	int	cc;
+	int	status = -EINPROGRESS;
+
+	info = hc32_to_cpup(ahcd, &td->hwINFO);
+	tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
+	bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
+	cc = TD_CC_GET(info);
+
+	/* ISO ... drivers see per-TD length/status */
+	if (type == PIPE_ISOCHRONOUS) {
+		/* TODO */
+		int	dlen = 0;
+
+		/* NOTE:  assumes FC in tdINFO == 0, and that
+		 * only the first of 0..MAXPSW psws is used.
+		 */
+		if (info & TD_CC)	/* hc didn't touch? */
+			return status;
+
+		if (usb_pipeout(urb->pipe))
+			dlen = urb->iso_frame_desc[td->index].length;
+		else {
+			/* short reads are always OK for ISO */
+			if (cc == TD_CC_DATAUNDERRUN)
+				cc = TD_CC_NOERROR;
+			dlen = tdDBP - td->data_dma + bl;
+		}
+
+		urb->actual_length += dlen;
+		urb->iso_frame_desc[td->index].actual_length = dlen;
+		urb->iso_frame_desc[td->index].status = cc_to_error[cc];
+
+		if (cc != TD_CC_NOERROR)
+			admhc_vdbg (ahcd,
+				"urb %p iso td %p (%d) len %d cc %d\n",
+				urb, td, 1 + td->index, dlen, cc);
+
+	/* BULK, INT, CONTROL ... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	} else {
+		/* update packet status if needed (short is normally ok) */
+		if (cc == TD_CC_DATAUNDERRUN
+				&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
+			cc = TD_CC_NOERROR;
+
+		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
+			status = cc_to_error[cc];
+
+
+		/* count all non-empty packets except control SETUP packet */
+		if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
+			urb->actual_length += tdDBP - td->data_dma + bl;
+		}
+
+		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
+			admhc_vdbg(ahcd,
+				"urb %p td %p (%d) cc %d, len=%d/%d\n",
+				urb, td, td->index, cc,
+				urb->actual_length,
+				urb->transfer_buffer_length);
+	}
+
+	list_del(&td->td_list);
+	urb_priv->td_idx++;
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void
+ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
+{
+	struct urb		*urb = td->urb;
+	struct urb_priv		*urb_priv = urb->hcpriv;
+	struct ed		*ed = td->ed;
+	struct list_head	*tmp = td->td_list.next;
+	__hc32			toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
+
+	admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
+	/* clear ed halt; this is the td that caused it, but keep it inactive
+	 * until its urb->complete() has a chance to clean up.
+	 */
+	ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
+	wmb();
+	ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
+
+	/* Get rid of all later tds from this urb. We don't have
+	 * to be careful: no errors and nothing was transferred.
+	 * Also patch the ed so it looks as if those tds completed normally.
+	 */
+	while (tmp != &ed->td_list) {
+		struct td	*next;
+
+		next = list_entry(tmp, struct td, td_list);
+		tmp = next->td_list.next;
+
+		if (next->urb != urb)
+			break;
+
+		/* NOTE: if multi-td control DATA segments get supported,
+		 * this urb had one of them, this td wasn't the last td
+		 * in that segment (TD_R clear), this ed halted because
+		 * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
+		 * then we need to leave the control STATUS packet queued
+		 * and clear ED_SKIP.
+		 */
+		list_del(&next->td_list);
+		urb_priv->td_cnt++;
+		ed->hwHeadP = next->hwNextTD | toggle;
+	}
+
+	/* help for troubleshooting:  report anything that
+	 * looks odd ... that doesn't include protocol stalls
+	 * (or maybe some other things)
+	 */
+	switch (cc) {
+	case TD_CC_DATAUNDERRUN:
+		if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
+			break;
+		/* fallthrough */
+	case TD_CC_STALL:
+		if (usb_pipecontrol(urb->pipe))
+			break;
+		/* fallthrough */
+	default:
+		admhc_dbg (ahcd,
+			"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
+			urb, urb->dev->devpath,
+			usb_pipeendpoint (urb->pipe),
+			usb_pipein (urb->pipe) ? "in" : "out",
+			hc32_to_cpu(ahcd, td->hwINFO),
+			cc, cc_to_error [cc]);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
+static void
+finish_unlinks(struct admhcd *ahcd, u16 tick)
+{
+	struct ed	*ed, **last;
+
+rescan_all:
+	for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
+		struct list_head	*entry, *tmp;
+		int			completed, modified;
+		__hc32			*prev;
+
+		/* only take off EDs that the HC isn't using, accounting for
+		 * frame counter wraps and EDs with partially retired TDs
+		 */
+		if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
+			if (tick_before (tick, ed->tick)) {
+skip_ed:
+				last = &ed->ed_rm_next;
+				continue;
+			}
+#if 0
+			if (!list_empty(&ed->td_list)) {
+				struct td	*td;
+				u32		head;
+
+				td = list_entry(ed->td_list.next, struct td,
+							td_list);
+				head = hc32_to_cpu(ahcd, ed->hwHeadP) &
+								TD_MASK;
+
+				/* INTR_WDH may need to clean up first */
+				if (td->td_dma != head)
+					goto skip_ed;
+			}
+#endif
+		}
+
+		/* reentrancy:  if we drop the schedule lock, someone might
+		 * have modified this list.  normally it's just prepending
+		 * entries (which we'd ignore), but paranoia won't hurt.
+		 */
+		*last = ed->ed_rm_next;
+		ed->ed_rm_next = NULL;
+		modified = 0;
+
+		/* unlink urbs as requested, but rescan the list after
+		 * we call a completion since it might have unlinked
+		 * another (earlier) urb
+		 *
+		 * When we get here, the HC doesn't see this ed.  But it
+		 * must not be rescheduled until all completed URBs have
+		 * been given back to the driver.
+		 */
+rescan_this:
+		completed = 0;
+		prev = &ed->hwHeadP;
+		list_for_each_safe(entry, tmp, &ed->td_list) {
+			struct td	*td;
+			struct urb	*urb;
+			struct urb_priv	*urb_priv;
+			__hc32		savebits;
+			int		status;
+
+			td = list_entry(entry, struct td, td_list);
+			urb = td->urb;
+			urb_priv = td->urb->hcpriv;
+
+			if (!urb->unlinked) {
+				prev = &td->hwNextTD;
+				continue;
+			}
+
+			if ((urb_priv) == NULL)
+				continue;
+
+			/* patch pointer hc uses */
+			savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK);
+			*prev = td->hwNextTD | savebits;
+
+			/* HC may have partly processed this TD */
+#ifdef ADMHC_VERBOSE_DEBUG
+			urb_print(ahcd, urb, "PARTIAL", 0);
+#endif
+			status = td_done(ahcd, urb, td);
+
+			/* if URB is done, clean up */
+			if (urb_priv->td_idx == urb_priv->td_cnt) {
+				modified = completed = 1;
+				finish_urb(ahcd, urb, status);
+			}
+		}
+		if (completed && !list_empty(&ed->td_list))
+			goto rescan_this;
+
+		/* ED's now officially unlinked, hc doesn't see */
+		ed->state = ED_IDLE;
+		ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
+		ed->hwNextED = 0;
+		wmb();
+		ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE);
+
+		/* but if there's work queued, reschedule */
+		if (!list_empty(&ed->td_list)) {
+			if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))
+				ed_schedule(ahcd, ed);
+		}
+
+		if (modified)
+			goto rescan_all;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Process normal completions (error or success) and clean the schedules.
+ *
+ * This is the main path for handing urbs back to drivers.  The only other
+ * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
+ * scanning the (re-reversed) donelist as this does.
+ */
+
+static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
+{
+	struct list_head *entry,*tmp;
+	__hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "UNHALT", ed, 0);
+#endif
+	/* clear ed halt; this is the td that caused it, but keep it inactive
+	 * until its urb->complete() has a chance to clean up.
+	 */
+	ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
+	wmb();
+	ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
+
+	list_for_each_safe(entry, tmp, &ed->td_list) {
+		struct td *td = list_entry(entry, struct td, td_list);
+		__hc32 info;
+
+		if (td->urb != urb)
+			break;
+
+		info = td->hwINFO;
+		info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN);
+		td->hwINFO = info;
+
+		ed->hwHeadP = td->hwNextTD | toggle;
+		wmb();
+	}
+
+}
+
+static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed)
+{
+	__hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
+
+	ed->hwHeadP = ed->hwTailP | toggle;
+}
+
+
+static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed)
+{
+	return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H);
+}
+
+static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
+		struct td *td)
+{
+	return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) ==
+		(hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK));
+}
+
+static void ed_update(struct admhcd *ahcd, struct ed *ed)
+{
+	struct list_head *entry,*tmp;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+	admhc_dump_ed(ahcd, "UPDATE", ed, 1);
+#endif
+
+	list_for_each_safe(entry, tmp, &ed->td_list) {
+		struct td *td = list_entry(entry, struct td, td_list);
+		struct urb *urb = td->urb;
+		struct urb_priv *urb_priv = urb->hcpriv;
+		int status;
+
+		if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
+			break;
+
+		/* update URB's length and status from TD */
+		status = td_done(ahcd, urb, td);
+		if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
+			ed_unhalt(ahcd, ed, urb);
+
+		if (ed->type == PIPE_INTERRUPT)
+			ed_intr_refill(ahcd,ed);
+
+		/* If all this urb's TDs are done, call complete() */
+		if (urb_priv->td_idx == urb_priv->td_cnt)
+			finish_urb(ahcd, urb, status);
+
+		/* clean schedule:  unlink EDs that are no longer busy */
+		if (list_empty(&ed->td_list)) {
+			if (ed->state == ED_OPER)
+				start_ed_unlink(ahcd, ed);
+
+		/* ... reenabling halted EDs only after fault cleanup */
+		} else if ((ed->hwINFO & cpu_to_hc32(ahcd,
+						ED_SKIP | ED_DEQUEUE))
+					== cpu_to_hc32(ahcd, ED_SKIP)) {
+			td = list_entry(ed->td_list.next, struct td, td_list);
+#if 0
+			if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) {
+				ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
+				/* ... hc may need waking-up */
+				switch (ed->type) {
+				case PIPE_CONTROL:
+					admhc_writel (ahcd, OHCI_CLF,
+						&ahcd->regs->cmdstatus);
+					break;
+				case PIPE_BULK:
+					admhc_writel (ahcd, OHCI_BLF,
+						&ahcd->regs->cmdstatus);
+					break;
+				}
+			}
+#else
+			if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN)))
+				ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
+#endif
+		}
+
+	}
+}
+
+/* there are some tds completed; called in_irq(), with HCD locked */
+static void admhc_td_complete(struct admhcd *ahcd)
+{
+	struct ed	*ed;
+
+	for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
+		if (ed->state != ED_OPER)
+			continue;
+
+		ed_update(ahcd, ed);
+	}
+}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120.h b/target/linux/adm5120/files/drivers/usb/host/adm5120.h
new file mode 100644
index 000000000..7c47cb8b7
--- /dev/null
+++ b/target/linux/adm5120/files/drivers/usb/host/adm5120.h
@@ -0,0 +1,762 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci.h
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
+ * host controller implementation.
+ */
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+
+/*
+ * OHCI Endpoint Descriptor (ED) ... holds TD queue
+ * See OHCI spec, section 4.2
+ *
+ * This is a "Queue Head" for those transfers, which is why
+ * both EHCI and UHCI call similar structures a "QH".
+ */
+
+#define TD_DATALEN_MAX	4096
+
+#define ED_ALIGN	16
+#define ED_MASK	((u32)~(ED_ALIGN-1))	/* strip hw status in low addr bits */
+
+struct ed {
+	/* first fields are hardware-specified */
+	__hc32			hwINFO;      /* endpoint config bitmap */
+	/* info bits defined by hcd */
+#define ED_DEQUEUE	(1 << 27)
+	/* info bits defined by the hardware */
+#define ED_MPS_SHIFT	16
+#define ED_MPS_MASK	((1 << 11)-1)
+#define ED_MPS_GET(x)	(((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
+#define ED_ISO		(1 << 15)		/* isochronous endpoint */
+#define ED_SKIP		(1 << 14)
+#define ED_SPEED_FULL	(1 << 13)		/* fullspeed device */
+#define ED_INT		(1 << 11)		/* interrupt endpoint */
+#define ED_EN_SHIFT	7			/* endpoint shift */
+#define ED_EN_MASK	((1 << 4)-1)		/* endpoint mask */
+#define ED_EN_GET(x)	(((x) >> ED_EN_SHIFT) & ED_EN_MASK)
+#define ED_FA_MASK	((1 << 7)-1)		/* function address mask */
+#define ED_FA_GET(x)	((x) & ED_FA_MASK)
+	__hc32			hwTailP;	/* tail of TD list */
+	__hc32			hwHeadP;	/* head of TD list (hc r/w) */
+#define ED_C		(0x02)			/* toggle carry */
+#define ED_H		(0x01)			/* halted */
+	__hc32			hwNextED;	/* next ED in list */
+
+	/* rest are purely for the driver's use */
+	dma_addr_t		dma;		/* addr of ED */
+	struct td		*dummy;		/* next TD to activate */
+
+	struct list_head	urb_list;	/* list of our URBs */
+
+	/* host's view of schedule */
+	struct ed		*ed_next;	/* on schedule list */
+	struct ed		*ed_prev;	/* for non-interrupt EDs */
+	struct ed		*ed_rm_next;	/* on rm list */
+	struct list_head	td_list;	/* "shadow list" of our TDs */
+
+	/* create --> IDLE --> OPER --> ... --> IDLE --> destroy
+	 * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
+	 */
+	u8			state;		/* ED_{IDLE,UNLINK,OPER} */
+#define ED_IDLE		0x00		/* NOT linked to HC */
+#define ED_UNLINK	0x01		/* being unlinked from hc */
+#define ED_OPER		0x02		/* IS linked to hc */
+
+	u8			type;		/* PIPE_{BULK,...} */
+
+	/* periodic scheduling params (for intr and iso) */
+	u8			branch;
+	u16			interval;
+	u16			load;
+	u16			last_iso;	/* iso only */
+
+	/* HC may see EDs on rm_list until next frame (frame_no == tick) */
+	u16			tick;
+} __attribute__ ((aligned(ED_ALIGN)));
+
+/*
+ * OHCI Transfer Descriptor (TD) ... one per transfer segment
+ * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
+ * and 4.3.2 (iso)
+ */
+
+#define TD_ALIGN	32
+#define TD_MASK	((u32)~(TD_ALIGN-1))	/* strip hw status in low addr bits */
+
+struct td {
+	/* first fields are hardware-specified */
+	__hc32		hwINFO;		/* transfer info bitmask */
+
+	/* hwINFO bits */
+#define TD_OWN		(1 << 31)		/* owner of the descriptor */
+#define TD_CC_SHIFT	27			/* condition code */
+#define TD_CC_MASK	0xf
+#define TD_CC		(TD_CC_MASK << TD_CC_SHIFT)
+#define TD_CC_GET(x)	(((x) >> TD_CC_SHIFT) & TD_CC_MASK)
+
+#define TD_EC_SHIFT	25			/* error count */
+#define TD_EC_MASK	0x3
+#define TD_EC		(TD_EC_MASK << TD_EC_SHIFT)
+#define TD_EC_GET(x)	((x >> TD_EC_SHIFT) & TD_EC_MASK)
+#define TD_T_SHIFT	23			/* data toggle state */
+#define TD_T_MASK	0x3
+#define TD_T		(TD_T_MASK << TD_T_SHIFT)
+#define TD_T_DATA0	(0x2 << TD_T_SHIFT)	/* DATA0 */
+#define TD_T_DATA1	(0x3 << TD_T_SHIFT)	/* DATA1 */
+#define TD_T_CARRY	(0x0 << TD_T_SHIFT)	/* uses ED_C */
+#define TD_T_GET(x)	(((x) >> TD_T_SHIFT) & TD_T_MASK)
+#define TD_DP_SHIFT	21			/* direction/pid */
+#define TD_DP_MASK	0x3
+#define TD_DP		(TD_DP_MASK << TD_DP_SHIFT)
+#define TD_DP_GET	(((x) >> TD_DP_SHIFT) & TD_DP_MASK)
+#define TD_DP_SETUP	(0x0 << TD_DP_SHIFT)	/* SETUP pid */
+#define TD_DP_OUT	(0x1 << TD_DP_SHIFT)	/* OUT pid */
+#define TD_DP_IN	(0x2 << TD_DP_SHIFT)	/* IN pid */
+#define TD_ISI_SHIFT	8			/* Interrupt Service Interval */
+#define TD_ISI_MASK	0x3f
+#define TD_ISI_GET(x)	(((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
+#define TD_FN_MASK	0x3f			/* frame number */
+#define TD_FN_GET(x)	((x) & TD_FN_MASK)
+
+	__hc32		hwDBP;		/* Data Buffer Pointer (or 0) */
+	__hc32		hwCBL;		/* Controller/Buffer Length */
+
+	/* hwCBL bits */
+#define TD_BL_MASK	0xffff		/* buffer length */
+#define TD_BL_GET(x)	((x) & TD_BL_MASK)
+#define TD_IE		(1 << 16)	/* interrupt enable */
+	__hc32		hwNextTD;	/* Next TD Pointer */
+
+	/* rest are purely for the driver's use */
+	__u8		index;
+	struct ed	*ed;
+	struct td	*td_hash;	/* dma-->td hashtable */
+	struct td	*next_dl_td;
+	struct urb	*urb;
+
+	dma_addr_t	td_dma;		/* addr of this TD */
+	dma_addr_t	data_dma;	/* addr of data it points to */
+
+	struct list_head td_list;	/* "shadow list", TDs on same ED */
+
+	u32		flags;
+#define TD_FLAG_DONE	(1 << 17)	/* retired to done list */
+#define TD_FLAG_ISO	(1 << 16)	/* copy of ED_ISO */
+} __attribute__ ((aligned(TD_ALIGN)));	/* c/b/i need 16; only iso needs 32 */
+
+/*
+ * Hardware transfer status codes -- CC from td->hwINFO
+ */
+#define TD_CC_NOERROR		0x00
+#define TD_CC_CRC		0x01
+#define TD_CC_BITSTUFFING	0x02
+#define TD_CC_DATATOGGLEM	0x03
+#define TD_CC_STALL		0x04
+#define TD_CC_DEVNOTRESP	0x05
+#define TD_CC_PIDCHECKFAIL	0x06
+#define TD_CC_UNEXPECTEDPID	0x07
+#define TD_CC_DATAOVERRUN	0x08
+#define TD_CC_DATAUNDERRUN	0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define TD_CC_BUFFEROVERRUN	0x0C
+#define TD_CC_BUFFERUNDERRUN	0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define TD_CC_HCD0		0x0E
+#define TD_CC_NOTACCESSED	0x0F
+
+/*
+ * preshifted status codes
+ */
+#define TD_SCC_NOTACCESSED	(TD_CC_NOTACCESSED << TD_CC_SHIFT)
+
+
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
+	/* No  Error  */	0,
+	/* CRC Error  */	-EILSEQ,
+	/* Bit Stuff  */	-EPROTO,
+	/* Data Togg  */	-EILSEQ,
+	/* Stall      */	-EPIPE,
+	/* DevNotResp */	-ETIME,
+	/* PIDCheck   */	-EPROTO,
+	/* UnExpPID   */	-EPROTO,
+	/* DataOver   */	-EOVERFLOW,
+	/* DataUnder  */	-EREMOTEIO,
+	/* (for hw)   */	-EIO,
+	/* (for hw)   */	-EIO,
+	/* BufferOver */	-ECOMM,
+	/* BuffUnder  */	-ENOSR,
+	/* (for HCD)  */	-EALREADY,
+	/* (for HCD)  */	-EALREADY
+};
+
+#define NUM_INTS	32
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O region.
+ * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
+ * Layout is in section 7 (and appendix B) of the spec.
+ */
+struct admhcd_regs {
+	__hc32	gencontrol;	/* General Control */
+	__hc32	int_status;	/* Interrupt Status */
+	__hc32	int_enable;	/* Interrupt Enable */
+	__hc32	reserved00;
+	__hc32	host_control;	/* Host General Control */
+	__hc32	reserved01;
+	__hc32	fminterval;	/* Frame Interval */
+	__hc32	fmnumber;	/* Frame Number */
+	__hc32	reserved02;
+	__hc32	reserved03;
+	__hc32	reserved04;
+	__hc32	reserved05;
+	__hc32	reserved06;
+	__hc32	reserved07;
+	__hc32	reserved08;
+	__hc32	reserved09;
+	__hc32	reserved10;
+	__hc32	reserved11;
+	__hc32	reserved12;
+	__hc32	reserved13;
+	__hc32	reserved14;
+	__hc32	reserved15;
+	__hc32	reserved16;
+	__hc32	reserved17;
+	__hc32	reserved18;
+	__hc32	reserved19;
+	__hc32	reserved20;
+	__hc32	reserved21;
+	__hc32	lsthresh;	/* Low Speed Threshold */
+	__hc32	rhdesc;		/* Root Hub Descriptor */
+#define MAX_ROOT_PORTS	2
+	__hc32	portstatus[MAX_ROOT_PORTS]; /* Port Status */
+	__hc32	hosthead;	/* Host Descriptor Head */
+} __attribute__ ((aligned(32)));
+
+/*
+ * General Control register bits
+ */
+#define ADMHC_CTRL_UHFE	(1 << 0)	/* USB Host Function Enable */
+#define ADMHC_CTRL_SIR	(1 << 1)	/* Software Interrupt request */
+#define ADMHC_CTRL_DMAA	(1 << 2)	/* DMA Arbitration Control */
+#define ADMHC_CTRL_SR	(1 << 3)	/* Software Reset */
+
+/*
+ * Host General Control register bits
+ */
+#define ADMHC_HC_BUSS		0x3		/* USB bus state */
+#define   ADMHC_BUSS_RESET	0x0
+#define   ADMHC_BUSS_RESUME	0x1
+#define   ADMHC_BUSS_OPER	0x2
+#define   ADMHC_BUSS_SUSPEND	0x3
+#define ADMHC_HC_DMAE		(1 << 2)	/* DMA enable */
+
+/*
+ * Interrupt Status/Enable register bits
+ */
+#define ADMHC_INTR_SOFI	(1 << 4)	/* start of frame */
+#define ADMHC_INTR_RESI	(1 << 5)	/* resume detected */
+#define ADMHC_INTR_6	(1 << 6)	/* unknown */
+#define ADMHC_INTR_7	(1 << 7)	/* unknown */
+#define ADMHC_INTR_BABI	(1 << 8)	/* babble detected */
+#define ADMHC_INTR_INSM	(1 << 9)	/* root hub status change */
+#define ADMHC_INTR_SO	(1 << 10)	/* scheduling overrun */
+#define ADMHC_INTR_FNO	(1 << 11)	/* frame number overflow */
+#define ADMHC_INTR_TDC	(1 << 20)	/* transfer descriptor completed */
+#define ADMHC_INTR_SWI	(1 << 29)	/* software interrupt */
+#define ADMHC_INTR_FATI	(1 << 30)	/* fatal error */
+#define ADMHC_INTR_INTA	(1 << 31)	/* interrupt active */
+
+#define ADMHC_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+/*
+ * SOF Frame Interval register bits
+ */
+#define ADMHC_SFI_FI_MASK	((1 << 14)-1)	/* Frame Interval value */
+#define ADMHC_SFI_FSLDP_SHIFT	16
+#define ADMHC_SFI_FSLDP_MASK	((1 << 15)-1)
+#define ADMHC_SFI_FIT		(1 << 31)	/* Frame Interval Toggle */
+
+/*
+ * SOF Frame Number register bits
+ */
+#define ADMHC_SFN_FN_MASK	((1 << 16)-1)	/* Frame Number Mask */
+#define ADMHC_SFN_FR_SHIFT	16		/* Frame Remaining Shift */
+#define ADMHC_SFN_FR_MASK	((1 << 14)-1)	/* Frame Remaining Mask */
+#define ADMHC_SFN_FRT		(1 << 31)	/* Frame Remaining Toggle */
+
+/*
+ * Root Hub Descriptor register bits
+ */
+#define ADMHC_RH_NUMP	0xff		/* number of ports */
+#define	ADMHC_RH_PSM	(1 << 8)	/* power switching mode */
+#define	ADMHC_RH_NPS	(1 << 9)	/* no power switching */
+#define	ADMHC_RH_OCPM	(1 << 10)	/* over current protection mode */
+#define	ADMHC_RH_NOCP	(1 << 11)	/* no over current protection */
+#define	ADMHC_RH_PPCM	(0xff << 16)	/* port power control */
+
+#define ADMHC_RH_LPS	(1 << 24)	/* local power switch */
+#define ADMHC_RH_OCI	(1 << 25)	/* over current indicator */
+
+/* status change bits */
+#define ADMHC_RH_LPSC	(1 << 26)	/* local power switch change */
+#define ADMHC_RH_OCIC	(1 << 27)	/* over current indicator change */
+
+#define ADMHC_RH_DRWE	(1 << 28)	/* device remote wakeup enable */
+#define ADMHC_RH_CRWE	(1 << 29)	/* clear remote wakeup enable */
+
+#define ADMHC_RH_CGP	(1 << 24)	/* clear global power */
+#define ADMHC_RH_SGP	(1 << 26)	/* set global power */
+
+/*
+ * Port Status register bits
+ */
+#define ADMHC_PS_CCS	(1 << 0)	/* current connect status */
+#define ADMHC_PS_PES	(1 << 1)	/* port enable status */
+#define ADMHC_PS_PSS	(1 << 2)	/* port suspend status */
+#define ADMHC_PS_POCI	(1 << 3)	/* port over current indicator */
+#define ADMHC_PS_PRS	(1 << 4)	/* port reset status */
+#define ADMHC_PS_PPS	(1 << 8)	/* port power status */
+#define ADMHC_PS_LSDA	(1 << 9)	/* low speed device attached */
+
+/* status change bits */
+#define ADMHC_PS_CSC	(1 << 16)	/* connect status change */
+#define ADMHC_PS_PESC	(1 << 17)	/* port enable status change */
+#define ADMHC_PS_PSSC	(1 << 18)	/* port suspend status change */
+#define ADMHC_PS_OCIC	(1 << 19)	/* over current indicator change */
+#define ADMHC_PS_PRSC	(1 << 20)	/* port reset status change */
+
+/* port feature bits */
+#define ADMHC_PS_CPE	(1 << 0)	/* clear port enable */
+#define ADMHC_PS_SPE	(1 << 1)	/* set port enable */
+#define ADMHC_PS_SPS	(1 << 2)	/* set port suspend */
+#define ADMHC_PS_CPS	(1 << 3)	/* clear suspend status */
+#define ADMHC_PS_SPR	(1 << 4)	/* set port reset */
+#define ADMHC_PS_SPP	(1 << 8)	/* set port power */
+#define ADMHC_PS_CPP	(1 << 9)	/* clear port power */
+
+/*
+ * the POTPGT value is not defined in the ADMHC, so define a dummy value
+ */
+#define ADMHC_POTPGT	2		/* in ms */
+
+/* hcd-private per-urb state */
+struct urb_priv {
+	struct ed		*ed;
+	struct list_head	pending;	/* URBs on the same ED */
+
+	u32			td_cnt;		/* # tds in this request */
+	u32			td_idx;		/* index of the current td */
+	struct td		*td[0];		/* all TDs in this request */
+};
+
+#define TD_HASH_SIZE    64    /* power'o'two */
+/* sizeof (struct td) ~= 64 == 2^6 ... */
+#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
+
+/*
+ * This is the full ADMHCD controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+struct admhcd {
+	spinlock_t		lock;
+
+	/*
+	 * I/O memory used to communicate with the HC (dma-consistent)
+	 */
+	struct admhcd_regs __iomem *regs;
+
+	/*
+	 * hcd adds to schedule for a live hc any time, but removals finish
+	 * only at the start of the next frame.
+	 */
+
+	struct ed		*ed_head;
+	struct ed		*ed_tails[4];
+
+	struct ed		*ed_rm_list;	/* to be removed */
+
+	struct ed		*periodic[NUM_INTS];	/* shadow int_table */
+
+#if 0	/* TODO: remove? */
+	/*
+	 * OTG controllers and transceivers need software interaction;
+	 * other external transceivers should be software-transparent
+	 */
+	struct otg_transceiver	*transceiver;
+#endif
+
+	/*
+	 * memory management for queue data structures
+	 */
+	struct dma_pool		*td_cache;
+	struct dma_pool		*ed_cache;
+	struct td		*td_hash[TD_HASH_SIZE];
+	struct list_head	pending;
+
+	/*
+	 * driver state
+	 */
+	int			num_ports;
+	int			load[NUM_INTS];
+	u32			host_control;	/* copy of the host_control reg */
+	unsigned long		next_statechange;	/* suspend/resume */
+	u32			fminterval;		/* saved register */
+	unsigned		autostop:1;	/* rh auto stopping/stopped */
+
+	unsigned long		flags;		/* for HC bugs */
+#define	OHCI_QUIRK_AMD756	0x01			/* erratum #4 */
+#define	OHCI_QUIRK_SUPERIO	0x02			/* natsemi */
+#define	OHCI_QUIRK_INITRESET	0x04			/* SiS, OPTi, ... */
+#define	OHCI_QUIRK_BE_DESC	0x08			/* BE descriptors */
+#define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
+#define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
+	// there are also chip quirks/bugs in init logic
+
+#ifdef DEBUG
+	struct dentry		*debug_dir;
+	struct dentry		*debug_async;
+	struct dentry		*debug_periodic;
+	struct dentry		*debug_registers;
+#endif
+};
+
+/* convert between an hcd pointer and the corresponding ahcd_hcd */
+static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
+{
+	return (struct admhcd *)(hcd->hcd_priv);
+}
+static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
+{
+	return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#define STUB_DEBUG_FILES
+#endif	/* DEBUG */
+
+#ifdef DEBUG
+#	define admhc_dbg(ahcd, fmt, args...) \
+		printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
+#else
+#	define admhc_dbg(ahcd, fmt, args...) do { } while (0)
+#endif
+
+#define admhc_err(ahcd, fmt, args...) \
+	printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
+#define admhc_info(ahcd, fmt, args...) \
+	printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
+#define admhc_warn(ahcd, fmt, args...) \
+	printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
+
+#ifdef ADMHC_VERBOSE_DEBUG
+#	define admhc_vdbg admhc_dbg
+#else
+#	define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * While most USB host controllers implement their registers and
+ * in-memory communication descriptors in little-endian format,
+ * a minority (notably the IBM STB04XXX and the Motorola MPC5200
+ * processors) implement them in big endian format.
+ *
+ * In addition some more exotic implementations like the Toshiba
+ * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
+ * they have a different endianness for registers vs. in-memory
+ * descriptors.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ * That leads to some tricky Kconfig rules howevber. There are
+ * different defaults based on some arch/ppc platforms, though
+ * the basic rules are:
+ *
+ * Controller type              Kconfig options needed
+ * ---------------              ----------------------
+ * little endian                CONFIG_USB_ADMHC_LITTLE_ENDIAN
+ *
+ * fully big endian             CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
+ *                              CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
+ *
+ * mixed endian                 CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
+ *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
+ *
+ * (If you have a mixed endian controller, you -must- also define
+ * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
+ * both your mixed endian and a fully big endian controller support in
+ * the same kernel image).
+ */
+
+#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
+#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
+#define big_endian_desc(ahcd)	(ahcd->flags & OHCI_QUIRK_BE_DESC)
+#else
+#define big_endian_desc(ahcd)	1		/* only big endian */
+#endif
+#else
+#define big_endian_desc(ahcd)	0		/* only little endian */
+#endif
+
+#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
+#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
+#define big_endian_mmio(ahcd)	(ahcd->flags & OHCI_QUIRK_BE_MMIO)
+#else
+#define big_endian_mmio(ahcd)	1		/* only big endian */
+#endif
+#else
+#define big_endian_mmio(ahcd)	0		/* only little endian */
+#endif
+
+/*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+ *
+ * REVISIT: arch/powerpc now has readl/writel_be, so the
+ * definition below can die once the STB04xxx support is
+ * finally ported over.
+ */
+#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
+#define readl_be(addr)		in_be32((__force unsigned *)addr)
+#define writel_be(val, addr)	out_be32((__force unsigned *)addr, val)
+#endif
+
+static inline unsigned int admhc_readl(const struct admhcd *ahcd,
+	__hc32 __iomem *regs)
+{
+#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
+	return big_endian_mmio(ahcd) ?
+		readl_be(regs) :
+		readl(regs);
+#else
+	return readl(regs);
+#endif
+}
+
+static inline void admhc_writel(const struct admhcd *ahcd,
+	const unsigned int val, __hc32 __iomem *regs)
+{
+#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
+	big_endian_mmio(ahcd) ?
+		writel_be(val, regs) :
+		writel(val, regs);
+#else
+		writel(val, regs);
+#endif
+}
+
+static inline void admhc_writel_flush(const struct admhcd *ahcd)
+{
+#if 0
+	/* TODO: remove? */
+	(void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
+#endif
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* cpu to ahcd */
+static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
+{
+	return big_endian_desc(ahcd) ?
+		(__force __hc16)cpu_to_be16(x) :
+		(__force __hc16)cpu_to_le16(x);
+}
+
+static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
+{
+	return big_endian_desc(ahcd) ?
+		cpu_to_be16p(x) :
+		cpu_to_le16p(x);
+}
+
+static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
+{
+	return big_endian_desc(ahcd) ?
+		(__force __hc32)cpu_to_be32(x) :
+		(__force __hc32)cpu_to_le32(x);
+}
+
+static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
+{
+	return big_endian_desc(ahcd) ?
+		cpu_to_be32p(x) :
+		cpu_to_le32p(x);
+}
+
+/* ahcd to cpu */
+static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
+{
+	return big_endian_desc(ahcd) ?
+		be16_to_cpu((__force __be16)x) :
+		le16_to_cpu((__force __le16)x);
+}
+
+static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
+{
+	return big_endian_desc(ahcd) ?
+		be16_to_cpup((__force __be16 *)x) :
+		le16_to_cpup((__force __le16 *)x);
+}
+
+static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
+{
+	return big_endian_desc(ahcd) ?
+		be32_to_cpu((__force __be32)x) :
+		le32_to_cpu((__force __le32)x);
+}
+
+static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
+{
+	return big_endian_desc(ahcd) ?
+		be32_to_cpup((__force __be32 *)x) :
+		le32_to_cpup((__force __le32 *)x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline u16 admhc_frame_no(const struct admhcd *ahcd)
+{
+	u32	t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
+	return (u16)t;
+}
+
+static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
+{
+	u32	t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
+	t &= ADMHC_SFN_FR_MASK;
+	return (u16)t;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void admhc_disable(struct admhcd *ahcd)
+{
+	admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
+}
+
+#define	FI		0x2edf		/* 12000 bits per frame (-1) */
+#define	FSLDP(fi)	(0x7fff & ((6 * ((fi) - 1200)) / 7))
+#define	FIT		ADMHC_SFI_FIT
+#define LSTHRESH	0x628		/* lowspeed bit threshold */
+
+static inline void periodic_reinit(struct admhcd *ahcd)
+{
+#if 0
+	u32	fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
+	u32	fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
+
+	/* TODO: adjust FSLargestDataPacket value too? */
+	admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
+					&ahcd->regs->fminterval);
+#else
+	u32	fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
+
+	/* TODO: adjust FSLargestDataPacket value too? */
+	admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
+					&ahcd->regs->fminterval);
+#endif
+}
+
+static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
+{
+	return admhc_readl(ahcd, &ahcd->regs->rhdesc);
+}
+
+static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
+{
+	return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
+}
+
+static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
+		u32 value)
+{
+	admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
+}
+
+static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
+{
+	/* FIXME: read-only bits must be masked out */
+	admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
+}
+
+static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
+{
+	u32	t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->int_enable);
+	t &= ~(ints);
+	admhc_writel(ahcd, t, &ahcd->regs->int_enable);
+	/* TODO: flush writes ?*/
+}
+
+static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
+{
+	u32	t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->int_enable);
+	t |= ints;
+	admhc_writel(ahcd, t, &ahcd->regs->int_enable);
+	/* TODO: flush writes ?*/
+}
+
+static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
+{
+	admhc_writel(ahcd, ints, &ahcd->regs->int_status);
+}
+
+static inline void admhc_dma_enable(struct admhcd *ahcd)
+{
+	u32 t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->host_control);
+	if (t & ADMHC_HC_DMAE)
+		return;
+
+	t |= ADMHC_HC_DMAE;
+	admhc_writel(ahcd, t, &ahcd->regs->host_control);
+	admhc_vdbg(ahcd,"DMA enabled\n");
+}
+
+static inline void admhc_dma_disable(struct admhcd *ahcd)
+{
+	u32 t;
+
+	t = admhc_readl(ahcd, &ahcd->regs->host_control);
+	if (!(t & ADMHC_HC_DMAE))
+		return;
+
+	t &= ~ADMHC_HC_DMAE;
+	admhc_writel(ahcd, t, &ahcd->regs->host_control);
+	admhc_vdbg(ahcd,"DMA disabled\n");
+}