[adm5120] split support of Cellvision boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12255 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 119 insertions, 60 deletions

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
index cb7739a52..1c4a91ad8 100644
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
@@ -3,7 +3,14 @@ if ADM5120
 menu "ADM5120 Board selection"
 
 config ADM5120_MACH_CAS_771
-	bool "Cellvision CAS-771 support"
+	bool "Cellvision CAS-771/771W support"
+	depends on CPU_LITTLE_ENDIAN
+	select ADM5120_SOC_BGA
+	select ADM5120_OEM_CELLVISION
+	default y
+
+config ADM5120_MACH_NFS_101
+	bool "Cellvision NFS-101U/101WU support"
 	depends on CPU_LITTLE_ENDIAN
 	select ADM5120_SOC_BGA
 	select ADM5120_OEM_CELLVISION
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
index 189951e60..a949fc9f6 100644
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
@@ -1 +1,4 @@
-obj-y	+= cellvision.o
\ No newline at end of file
+obj-y	+= cellvision.o
+
+obj-$(CONFIG_ADM5120_MACH_CAS_771)	+= cas-771.o
+obj-$(CONFIG_ADM5120_MACH_NFS_101)	+= nfs-101.o
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c
new file mode 100644
index 000000000..26995bb0a
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c
@@ -0,0 +1,36 @@
+/*
+ *  Cellvision/SparkLAN CAS-771/771W support
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
+	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+	PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
+	PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+static struct gpio_led cas771_gpio_leds[] __initdata = {
+	GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",	NULL),
+	/* GPIO PIN3 is the reset */
+	GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",	NULL),
+	GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",	NULL),
+	GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",		NULL),
+};
+
+static void __init cas771_setup(void)
+{
+	cas7xx_setup();
+	adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
+					cas771_gpio_leds);
+	adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
+}
+
+ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup);
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
index f58a8fef4..2b90ce16d 100644
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
@@ -9,16 +9,7 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
+#include "cellvision.h"
 
 #define CELLVISION_GPIO_FLASH_A20	ADM5120_GPIO_PIN5
 #define CELLVISION_GPIO_DEV_MASK	(1 << CELLVISION_GPIO_FLASH_A20)
@@ -71,20 +62,6 @@ static struct mtd_partition cas7xx_partitions[] = {
 };
 #endif /* CONFIG_MTD_PARTITIONS */
 
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
-	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-	PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-	PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led cas771_gpio_leds[] __initdata = {
-	GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",	NULL),
-	/* GPIO PIN3 is the reset */
-	GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",	NULL),
-	GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",	NULL),
-	GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",		NULL),
-};
-
 static void switch_bank_gpio5(unsigned bank)
 {
 	switch (bank) {
@@ -97,7 +74,7 @@ static void switch_bank_gpio5(unsigned bank)
 	}
 }
 
-static void __init cellvision_generic_setup(void)
+static void __init cellvision_flash_setup(void)
 {
 	/* setup flash A20 line */
 	gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
@@ -107,59 +84,45 @@ static void __init cellvision_generic_setup(void)
 	adm5120_add_device_flash(0);
 }
 
-static void __init cas6xx_setup(void)
+void __init cas6xx_flash_setup(void)
 {
 #ifdef CONFIG_MTD_PARTITIONS
 	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
 	adm5120_flash0_data.parts = cas6xx_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
-	cellvision_generic_setup();
 
-	adm5120_add_device_switch(1, NULL);
+	cellvision_flash_setup();
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
-
-static void __init cas7xx_setup(void)
+void __init cas7xx_flash_setup(void)
 {
 #ifdef CONFIG_MTD_PARTITIONS
 	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
 	adm5120_flash0_data.parts = cas7xx_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
 
-	adm5120_add_device_switch(1, NULL);
+	cellvision_flash_setup();
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup);
-
-static void __init cas771_setup(void)
+#if 0
+void __init cas6xx_setup(void)
 {
-	cas7xx_setup();
-	adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
-					cas771_gpio_leds);
-	adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
+	cas6xx_flash_setup();
+	adm5120_add_device_switch(1, NULL);
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup);
-
-static u8 nfs_vlans[6] __initdata = { /* TODO: not tested */
-	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
+ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
+#endif
 
-static void __init nfs_setup(void)
+void __init cas7xx_setup(void)
 {
-#ifdef CONFIG_MTD_PARTITIONS
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-	adm5120_flash0_data.parts = cas6xx_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
-
-	cellvision_generic_setup();
-	adm5120_add_device_switch(5, nfs_vlans);
-
-	/* TODO: add PCI IRQ map */
+	cas7xx_flash_setup();
+	adm5120_add_device_switch(1, NULL);
 }
 
-ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs_setup);
+#if 0
+ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup);
+#endif
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h
new file mode 100644
index 000000000..c7c6a1e19
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h
@@ -0,0 +1,26 @@
+/*
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+extern void cas6xx_flash_setup(void) __init;
+extern void cas7xx_flash_setup(void) __init;
+extern void cas6xx_setup(void) __init;
+extern void cas7xx_setup(void) __init;
diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c
new file mode 100644
index 000000000..efd4e5758
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c
@@ -0,0 +1,24 @@
+/*
+ *  Cellvision/SparkLAN NFS-101U/WU support
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static u8 nfs101_vlans[6] __initdata = { /* TODO: not tested */
+	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init nfs101_setup(void)
+{
+	cas6xx_flash_setup();
+	adm5120_add_device_switch(5, nfs101_vlans);
+}
+
+ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs101_setup);