strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 178 deletions

diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
deleted file mode 100644
index 22317f968..000000000
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * ADM5120 specific board support for LZMA decompressor
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <stddef.h>
-
-#define READREG(r)	*(volatile unsigned int *)(r)
-#define WRITEREG(r,v)	*(volatile unsigned int *)(r) = v
-
-/*
- * INTC definitions
- */
-#define INTC_BASE	0xB2200000
-
-/* INTC registers */
-#define INTC_REG_IRQ_DISABLE	0x0C
-
-/*
- * UART definitions
- */
-#define UART_BASE	0xB2600000
-/* UART registers */
-#define UART_REG_DATA	0x00	/* Data register */
-#define UART_REG_ECR	0x04	/* Error Clear register */
-#define UART_REG_LCRH	0x08	/* Line Control High register */
-#define UART_REG_LCRM	0x0C	/* Line Control Middle register */
-#define UART_REG_LCRL	0x10	/* Line Control Low register */
-#define UART_REG_CTRL	0x14	/* Control register */
-#define UART_REG_FLAG   0x18	/* Flag register */
-
-/* Control register bits */
-#define UART_CTRL_EN	( 1 << 0 )	/* UART enable */
-
-/* Line Control High register bits */
-#define UART_LCRH_FEN	( 1 << 4 )	/* FIFO enable */
-
-/* Flag register bits */
-#define UART_FLAG_CTS	( 1 << 0 )
-#define UART_FLAG_DSR	( 1 << 1 )
-#define UART_FLAG_DCD	( 1 << 2 )
-#define UART_FLAG_BUSY	( 1 << 3 )
-#define UART_FLAG_RXFE	( 1 << 4 )	/* RX FIFO empty */
-#define UART_FLAG_TXFF	( 1 << 5 )	/* TX FIFO full */
-#define UART_FLAG_RXFF	( 1 << 6 )	/* RX FIFO full */
-#define UART_FLAG_TXFE	( 1 << 7 )	/* TX FIFO empty */
-
-/*
- * SWITCH definitions
- */
-#define SWITCH_BASE	0xB2000000
-
-#define SWITCH_REG_CPUP_CONF	0x0024
-#define SWITCH_REG_PORT_CONF0	0x0028
-
-#define SWITCH_REG_GPIO_CONF0	0x00B8
-#define SWITCH_REG_GPIO_CONF2	0x00BC
-
-#define SWITCH_REG_PORT0_LED	0x0100
-#define SWITCH_REG_PORT1_LED	0x0104
-#define SWITCH_REG_PORT2_LED	0x0108
-#define SWITCH_REG_PORT3_LED	0x010C
-#define SWITCH_REG_PORT4_LED	0x0110
-
-#define SWITCH_PORTS_HW		0x3F		/* Hardware Ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP		( 1 << 0 )	/* Disable CPU port */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT	0	/* disable port shift*/
-
-
-/*
- * UART routines
- */
-
-#define UART_READ(r)	READREG(UART_BASE+(r))
-#define UART_WRITE(r,v)	WRITEREG(UART_BASE+(r),(v))
-
-static void uart_init(void)
-{
-#if 0
-	unsigned int t;
-
-	/* disable uart */
-	UART_WRITE(UART_REG_CTRL, 0);
-
-	/* keep current baud rate */
-	t = UART_READ(UART_REG_LCRM);
-	UART_WRITE(UART_REG_LCRM, t);
-	t = UART_READ(UART_REG_LCRL);
-	UART_WRITE(UART_REG_LCRL, t);
-
-	/* keep data, stop, and parity bits, but disable FIFO */
-	t = UART_READ(UART_REG_LCRH);
-	t &= ~(UART_LCRH_FEN);
-	UART_WRITE(UART_REG_LCRH, t );
-
-	/* clear error bits */
-	UART_WRITE(UART_REG_ECR, 0xFF);
-
-	/* enable uart, and disable interrupts */
-	UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
-#endif
-}
-
-/*
- * INTC routines
- */
-
-#define INTC_READ(r)	READREG(INTC_BASE+(r))
-#define INTC_WRITE(r,v)	WRITEREG(INTC_BASE+(r),v)
-
-static void intc_init(void)
-{
-	INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF);
-}
-
-/*
- * SWITCH routines
- */
-
-#define SWITCH_READ(r)		READREG(SWITCH_BASE+(r))
-#define SWITCH_WRITE(r,v)	WRITEREG(SWITCH_BASE+(r),v)
-
-static void switch_init(void)
-{
-	/* disable PHYS ports */
-	SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
-	    (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
-
-	/* disable CPU port */
-	SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP);
-
-	/* disable GPIO lines */
-	SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
-	SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
-
-	/* disable LED lines */
-	SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
-	SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
-	SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0);
-	SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0);
-	SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0);
-}
-
-void board_putc(int ch)
-{
-	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-
-	UART_WRITE(UART_REG_DATA, ch);
-
-	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-}
-
-void board_init(void)
-{
-	intc_init();
-	switch_init();
-	uart_init();
-}