strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 0 insertions, 1028 deletions

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile
deleted file mode 100644
index a05c89156..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for platforms based on ADM5120 SoC
-#
-
-obj-y	+= generic.o
-obj-y	+= cellvision.o
-obj-y	+= compex.o
-obj-y	+= edimax.o
-obj-y	+= infineon.o
-obj-y	+= mikrotik.o
-obj-y	+= zyxel.o
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
deleted file mode 100644
index f7d44e257..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *  $Id$
- *
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN5, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN5, 1);
-		break;
-	}
-}
-
-static struct mtd_partition cas6xx_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 32*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 32*1024,
-	} , {
-		.name	= "nvfs1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64*1024,
-	} , {
-		.name	= "nvfs2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 32*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 32*1024,
-	} , {
-		.name	= "nvfs",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 128*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *cas6xx_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static struct platform_device *cas7xx_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static void __init cas6xx_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-	adm5120_flash0_data.parts = cas6xx_partitions;
-
-	/* TODO: setup mac address */
-}
-
-static void __init cas7xx_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL);	/* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
-	adm5120_flash0_data.parts = cas7xx_partitions;
-
-	/* TODO: setup mac address */
-}
-
-static struct adm5120_board cas630_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS630,
-	.name		= "Cellvision CAS-630/630W",
-	.board_setup	= cas6xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas6xx_devices),
-	.devices	= cas6xx_devices,
-};
-
-static struct adm5120_board cas670_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS670,
-	.name		= "Cellvision CAS-670/670W",
-	.board_setup	= cas6xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas6xx_devices),
-	.devices	= cas6xx_devices,
-};
-
-static struct adm5120_board cas700_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS700,
-	.name		= "Cellvision CAS-700/700W",
-	.board_setup	= cas7xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas7xx_devices),
-	.devices	= cas7xx_devices,
-};
-
-static struct adm5120_board cas771_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS771,
-	.name		= "Cellvision CAS-771/771W",
-	.board_setup	= cas7xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas7xx_devices),
-	.devices	= cas7xx_devices,
-};
-
-static struct adm5120_board cas790_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS790,
-	.name		= "Cellvision CAS-790",
-	.board_setup	= cas7xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas7xx_devices),
-	.devices	= cas7xx_devices,
-};
-
-static struct adm5120_board cas861_board __initdata = {
-	.mach_type	= MACH_ADM5120_CAS861,
-	.name		= "Cellvision CAS-861/861W",
-	.board_setup	= cas7xx_setup,
-	.eth_num_ports	= 1,
-	.num_devices	= ARRAY_SIZE(cas7xx_devices),
-	.devices	= cas7xx_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&cas630_board);
-	adm5120_board_register(&cas670_board);
-	adm5120_board_register(&cas700_board);
-	adm5120_board_register(&cas771_board);
-	adm5120_board_register(&cas790_board);
-	adm5120_board_register(&cas861_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c
deleted file mode 100644
index 620179744..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- *  $Id$
- *
- *  Compex boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN5, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN5, 1);
-		break;
-	}
-}
-
-static void wp54_reset(void)
-{
-	gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
-	{
-		.name	= "cfe",
-		.offset	= 0,
-		.size	= 0x050000,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "trx",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 0x3A0000,
-	} , {
-		.name	= "nvram",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 0x010000,
-	}
-};
-
-static struct platform_device *np2xg_devices[] __initdata = {
-	&adm5120_flash0_device,
-	&adm5120_usbc_device,
-};
-
-static struct platform_device *wp54_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static void __init np2xg_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-	/* TODO: setup mac address */
-}
-
-static void __init wp54_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
-	gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-	/* TODO: setup mac address */
-}
-
-static void __init wp54_wrt_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
-	gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
-	adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
-	/* TODO: setup mac address */
-}
-
-unsigned char np27g_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-unsigned char np28g_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x41, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-unsigned char wp54_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-static struct adm5120_board np27g_board __initdata = {
-	.mach_type	= MACH_ADM5120_NP27G,
-	.name		= "Compex NetPassage 27G",
-	.board_setup	= np2xg_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= np27g_vlans,
-	.num_devices	= ARRAY_SIZE(np2xg_devices),
-	.devices	= np2xg_devices,
-};
-
-static struct adm5120_board np28g_board __initdata = {
-	.mach_type	= MACH_ADM5120_NP28G,
-	.name		= "Compex NetPassage 28G",
-	.board_setup	= np2xg_setup,
-	.eth_num_ports	= 4,
-	.eth_vlans	= np28g_vlans,
-	.num_devices	= ARRAY_SIZE(np2xg_devices),
-	.devices	= np2xg_devices,
-};
-
-static struct adm5120_board wp54ag_board __initdata = {
-	.mach_type	= MACH_ADM5120_WP54AG,
-	.name		= "Compex WP54AG",
-	.board_setup	= wp54_setup,
-	.board_reset	= wp54_reset,
-	.eth_num_ports	= 2,
-	.eth_vlans	= wp54_vlans,
-	.num_devices	= ARRAY_SIZE(wp54_devices),
-	.devices	= wp54_devices,
-};
-
-static struct adm5120_board wp54g_board __initdata = {
-	.mach_type	= MACH_ADM5120_WP54G,
-	.name		= "Compex WP54G",
-	.board_setup	= wp54_setup,
-	.board_reset	= wp54_reset,
-	.eth_num_ports	= 2,
-	.eth_vlans	= wp54_vlans,
-	.num_devices	= ARRAY_SIZE(wp54_devices),
-	.devices	= wp54_devices,
-};
-
-static struct adm5120_board wp54g_wrt_board __initdata = {
-	.mach_type	= MACH_ADM5120_WP54G,
-	.name		= "Compex WP54G-WRT",
-	.board_setup	= wp54_wrt_setup,
-	.board_reset	= wp54_reset,
-	.eth_num_ports	= 2,
-	.eth_vlans	= wp54_vlans,
-	.num_devices	= ARRAY_SIZE(wp54_devices),
-	.devices	= wp54_devices,
-};
-
-static struct adm5120_board wpp54ag_board __initdata = {
-	.mach_type	= MACH_ADM5120_WPP54AG,
-	.name		= "Compex WPP54AG",
-	.board_setup	= wp54_setup,
-	.board_reset	= wp54_reset,
-	.eth_num_ports	= 2,
-	.eth_vlans	= wp54_vlans,
-	.num_devices	= ARRAY_SIZE(wp54_devices),
-	.devices	= wp54_devices,
-};
-
-static struct adm5120_board wpp54g_board __initdata = {
-	.mach_type	= MACH_ADM5120_WPP54G,
-	.name		= "Compex WPP54G",
-	.board_setup	= wp54_setup,
-	.board_reset	= wp54_reset,
-	.eth_num_ports	= 2,
-	.eth_vlans	= wp54_vlans,
-	.num_devices	= ARRAY_SIZE(wp54_devices),
-	.devices	= wp54_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&np27g_board);
-	adm5120_board_register(&np28g_board);
-	adm5120_board_register(&wp54ag_board);
-	adm5120_board_register(&wp54g_board);
-	adm5120_board_register(&wp54g_wrt_board);
-	adm5120_board_register(&wpp54ag_board);
-	adm5120_board_register(&wpp54g_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c
deleted file mode 100644
index a184cbce4..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  $Id$
- *
- *  Edimax boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static struct mtd_partition br6104k_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 32*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 32*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *br6104k_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static void __init br6104k_setup(void) {
-	/* setup data for flash0 device */
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
-	adm5120_flash0_data.parts = br6104k_partitions;
-
-	/* TODO: setup mac addresses, if possible */
-}
-
-unsigned char br6104k_vlans[6] = {
-	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static struct adm5120_board br6104k_board __initdata = {
-	.mach_type	= MACH_ADM5120_BR6104K,
-	.name		= "Edimax BR-6104K",
-	.board_setup	= br6104k_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= br6104k_vlans,
-	.num_devices	= ARRAY_SIZE(br6104k_devices),
-	.devices	= br6104k_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&br6104k_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c
deleted file mode 100644
index de78ca40e..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic ADM5120 based board
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static struct platform_device *generic_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static struct adm5120_board generic_board __initdata = {
-	.mach_type	= MACH_ADM5120_GENERIC,
-	.name		= "Generic ADM5120 board",
-	.eth_num_ports	= 6,
-	.num_devices	= ARRAY_SIZE(generic_devices),
-	.devices	= generic_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&generic_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
deleted file mode 100644
index ebeb5aa87..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *  $Id$
- *
- *  Infineon boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static void switch_bank_gpio3(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN3, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN3, 1);
-		break;
-	}
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN5, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN5, 1);
-		break;
-	}
-}
-
-static struct mtd_partition easy_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 64*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "boardcfg",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *easy5120pata_devices[] __initdata = {
-	&adm5120_flash0_device,
-	/* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy5120rt_devices[] __initdata = {
-	&adm5120_flash0_device,
-	&adm5120_usbc_device
-};
-
-static struct platform_device *easy5120wvoip_devices[] __initdata = {
-	&adm5120_flash0_device,
-	/* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy83000_devices[] __initdata = {
-	&adm5120_flash0_device,
-	/* TODO: add VINAX device? */
-};
-
-static void __init easy_setup_pqfp(void)
-{
-	gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-	adm5120_flash0_data.parts = easy_partitions;
-
-	/* TODO: setup mac addresses */
-}
-
-static void __init easy_setup_bga(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-	adm5120_flash0_data.parts = easy_partitions;
-
-	/* TODO: setup mac addresses */
-}
-
-static struct adm5120_board easy5120pata_board __initdata = {
-	.mach_type	= MACH_ADM5120_EASY5120PATA,
-	.name		= "Infineon EASY 5120P-ATA Reference Board",
-	.board_setup	= easy_setup_pqfp,
-	.eth_num_ports	= 6,
-	.num_devices	= ARRAY_SIZE(easy5120pata_devices),
-	.devices	= easy5120pata_devices,
-};
-
-static struct adm5120_board easy5120rt_board __initdata = {
-	.mach_type	= MACH_ADM5120_EASY5120RT,
-	.name		= "Infineon EASY 5120-RT Reference Board",
-	.board_setup	= easy_setup_bga,
-	.eth_num_ports	= 5,
-	.num_devices	= ARRAY_SIZE(easy5120rt_devices),
-	.devices	= easy5120rt_devices,
-};
-
-static struct adm5120_board easy5120wvoip_board __initdata = {
-	.mach_type	= MACH_ADM5120_EASY5120WVOIP,
-	.name		= "Infineon EASY 5120-WVoIP Reference Board",
-	.board_setup	= easy_setup_bga,
-	.eth_num_ports	= 6,
-	.num_devices	= ARRAY_SIZE(easy5120wvoip_devices),
-	.devices	= easy5120wvoip_devices,
-};
-
-static struct adm5120_board easy83000_board __initdata = {
-	.mach_type	= MACH_ADM5120_EASY83000,
-	.name		= "Infineon EASY 83000 Reference Board",
-	.board_setup	= easy_setup_pqfp,
-	.eth_num_ports	= 6,
-	.num_devices	= ARRAY_SIZE(easy83000_devices),
-	.devices	= easy83000_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&easy5120pata_board);
-	adm5120_board_register(&easy5120rt_board);
-	adm5120_board_register(&easy5120wvoip_board);
-	adm5120_board_register(&easy83000_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c
deleted file mode 100644
index f233772d0..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik RouterBOARDs 111/112/133/133C/150/153
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static struct mtd_partition rb1xx_partitions[] = {
-	{
-		.name	= "booter",
-		.offset	= 0,
-		.size	= 64*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *rb1xx_devices[] __initdata = {
-	&adm5120_flash0_device,
-	&adm5120_nand_device,
-};
-
-static struct platform_device *rb150_devices[] __initdata = {
-	&adm5120_flash0_device,
-	/* TODO: nand device is not yet supported */
-};
-
-static void __init rb1xx_setup(void)
-{
-	/* setup data for flash0 device */
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
-	adm5120_flash0_data.parts = rb1xx_partitions;
-
-	/* TODO: setup mac address */
-}
-
-#if 0
-/*
- * RB1xx boards have bad network performance with the default VLAN matrixes.
- * Disable it while the ethernet driver gets fixed.
- */
-static unsigned char rb11x_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x44, 0x42, 0x41, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133c_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x44, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb15x_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-#else
-static unsigned char rb_vlans[6] __initdata = {
-	0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-#define rb11x_vlans	rb_vlans
-#define rb133_vlans	rb_vlans
-#define rb133c_vlans	rb_vlans
-#define rb15x_vlans	rb_vlans
-#endif
-
-static struct adm5120_board rb111_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_111,
-	.name		= "Mikrotik RouterBOARD 111",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 1,
-	.eth_vlans	= rb11x_vlans,
-	.num_devices	= ARRAY_SIZE(rb1xx_devices),
-	.devices	= rb1xx_devices,
-};
-
-static struct adm5120_board rb112_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_112,
-	.name		= "Mikrotik RouterBOARD 112",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 1,
-	.eth_vlans	= rb11x_vlans,
-	.num_devices	= ARRAY_SIZE(rb1xx_devices),
-	.devices	= rb1xx_devices,
-};
-
-static struct adm5120_board rb133_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_133,
-	.name		= "Mikrotik RouterBOARD 133",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 3,
-	.eth_vlans	= rb133_vlans,
-	.num_devices	= ARRAY_SIZE(rb1xx_devices),
-	.devices	= rb1xx_devices,
-};
-
-static struct adm5120_board rb133c_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_133C,
-	.name		= "Mikrotik RouterBOARD 133C",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 1,
-	.eth_vlans	= rb133c_vlans,
-	.num_devices	= ARRAY_SIZE(rb1xx_devices),
-	.devices	= rb1xx_devices,
-};
-
-static struct adm5120_board rb150_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_150,
-	.name		= "Mikrotik RouterBOARD 150",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= rb15x_vlans,
-	.num_devices	= ARRAY_SIZE(rb150_devices),
-	.devices	= rb150_devices,
-};
-
-static struct adm5120_board rb153_board __initdata = {
-	.mach_type	= MACH_ADM5120_RB_153,
-	.name		= "Mikrotik RouterBOARD 153",
-	.board_setup	= rb1xx_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= rb15x_vlans,
-	.num_devices	= ARRAY_SIZE(rb1xx_devices),
-	.devices	= rb1xx_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&rb111_board);
-	adm5120_board_register(&rb112_board);
-	adm5120_board_register(&rb133_board);
-	adm5120_board_register(&rb133c_board);
-	adm5120_board_register(&rb150_board);
-	adm5120_board_register(&rb153_board);
-	return 0;
-}
-
-pure_initcall(register_boards);
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
deleted file mode 100644
index 0a60205eb..000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  $Id$
- *
- *  ZyXEL Prestige P-334/P-335 boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN5, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN5, 1);
-		break;
-	}
-}
-
-static struct mtd_partition p33x_partitions[] = {
-	{
-		.name	= "bootbase",
-		.offset	= 0,
-		.size	= 16*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "rom",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 16*1024,
-	} , {
-		.name	= "bootext",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 96*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "trx",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	} , {
-		.name	= "firmware",
-		.offset	= 32*1024,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *p334_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static struct platform_device *p335_devices[] __initdata = {
-	&adm5120_flash0_device,
-	&adm5120_usbc_device,
-};
-
-static void __init p33x_setup(void)
-{
-	gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-	/* setup data for flash0 device */
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
-	adm5120_flash0_data.parts = p33x_partitions;
-
-	/* TODO: setup mac address */
-}
-
-unsigned char p33x_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-static struct adm5120_board p334wt_board __initdata = {
-	.mach_type	= MACH_ADM5120_P334WT,
-	.name		= "ZyXEL Prestige 334WT",
-	.board_setup	= p33x_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= p33x_vlans,
-	.num_devices	= ARRAY_SIZE(p334_devices),
-	.devices	= p334_devices,
-};
-
-static struct adm5120_board p335_board __initdata = {
-	.mach_type	= MACH_ADM5120_P335,
-	.name		= "ZyXEL Prestige 335/335WT",
-	.board_setup	= p33x_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= p33x_vlans,
-	.num_devices	= ARRAY_SIZE(p335_devices),
-	.devices	= p335_devices,
-};
-
-static int __init register_boards(void)
-{
-	adm5120_board_register(&p334wt_board);
-	adm5120_board_register(&p335_board);
-	return 0;
-}
-
-pure_initcall(register_boards);