diff options
| author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2006-10-26 01:08:41 +0000 |
|---|---|---|
| committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2006-10-26 01:08:41 +0000 |
| commit | 99f2f68b6fb7caad7689ae9ad73da43f54ac0337 (patch) | |
| tree | 0d11d9505339e326cf674abd1dabea62d804a1d0 /target/image/rb532 | |
| parent | e307e204725ca8fedba7c780ca28b195a91d1f88 (diff) | |
Add NAND flash/YAFFS2 patches for RB532 by David Goodenough
Read the kernel command line from an otherwise unused area of the kernel image (will be used for changing the command line on the fly when copying the system from CF to NAND)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5296 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/image/rb532')
| -rw-r--r-- | target/image/rb532/Makefile | 35 |
1 files changed, 27 insertions, 8 deletions
diff --git a/target/image/rb532/Makefile b/target/image/rb532/Makefile index 2a61a484d..7213cf8b8 100644 --- a/target/image/rb532/Makefile +++ b/target/image/rb532/Makefile @@ -6,6 +6,7 @@ # include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk +include $(INCLUDE_DIR)/kernel.mk LOADADDR = 0x81000000 # RAM start + 16M KERNEL_ENTRY = 0x80101000 @@ -23,19 +24,41 @@ define Build/Clean $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean endef +CMDLINE_SIZE=512 +CMDLINE_OFFSET=4112 + define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile + echo 'root=/dev/cfa2 ' | \ + dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \ + dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1 + $(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL) endef define Image/BuildKernel + cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma + $(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux endef PARTITION1=\x80\x01\x01\x00\x27\x01\x20\x7b\x20\x00\x00\x00\xe0\x1e\x00\x00# 4 MB (kernel part) PARTITION2=\x00\x00\x01\x7c\x83\x01\xa0\x64\x00\x1f\x00\x00\x40\x7a\x00\x00# 16 MB (rootfs part) -define Image/Build/jffs2-128k +define Image/cmdline/jffs2-64k +block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 +endef + +define Image/cmdline/jffs2-128k +block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 +endef + +define Image/cmdline/ext2 +root=/dev/cfa2 rootfstype=ext2 +endef + +define Image/Build + echo '$(strip $(call Image/cmdline/$(1))) ' | \ + dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \ + dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1 ( \ echo -ne OWRT | dd bs=$$$$((0x1be)) conv=sync; \ ( \ @@ -44,14 +67,10 @@ define Image/Build/jffs2-128k ) | dd bs=$$$$((0x40)) conv=sync; \ echo -ne '\x55\xaa'; \ dd if=/dev/zero bs=$$$$((0x3e00)) conv=sync count=1; \ - dd if=$(KDIR)/loader.elf bs=$$$$((0x3dc000)) conv=sync; \ + dd if=$(LINUX_DIR)/vmlinux bs=$$$$((0x3dc000)) conv=sync; \ cat $(KDIR)/root.$(1); \ echo -ne '\xde\xad\xc0\xde'; \ ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin endef -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - $(eval $(call BuildImage)) |