diff options
author | hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-03-23 16:16:22 +0000 |
---|---|---|
committer | hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2009-03-23 16:16:22 +0000 |
commit | 0d93d18003be7dfbb634a98a12e191c55f0a464f (patch) | |
tree | 0ecdaf239e2b596e59052c57e585bf9529b6f58b /package | |
parent | f5da7045b2ace1946e2d9179a2d64d93ce978c3f (diff) |
[hostapd] bump to version 0.6.9.
Synced default.config and mini.config with upstream version.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14992 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'package')
-rw-r--r-- | package/hostapd/Makefile | 4 | ||||
-rw-r--r-- | package/hostapd/files/default.config | 53 | ||||
-rw-r--r-- | package/hostapd/files/mini.config | 53 |
3 files changed, 66 insertions, 44 deletions
diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile index e4f365547..38b14c7e1 100644 --- a/package/hostapd/Makefile +++ b/package/hostapd/Makefile @@ -9,14 +9,14 @@ include $(TOPDIR)/rules.mk PKG_NAME:=hostapd -PKG_VERSION:=0.6.8 +PKG_VERSION:=0.6.9 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/ PKG_SOURCE_SUBDIR:=hostapd-$(PKG_VERSION) PKG_SOURCE_VERSION:=$(PKG_REV) -PKG_MD5SUM:=4b183183e20af1386017e9f499184ee1 +PKG_MD5SUM:=83630d11fa66ade9091f1b304fccd74c PKG_BUILD_DEPENDS:=PACKAGE_kmod-madwifi:madwifi PACKAGE_kmod-mac80211:mac80211 PACKAGE_kmod-mac80211:libnl include $(INCLUDE_DIR)/package.mk diff --git a/package/hostapd/files/default.config b/package/hostapd/files/default.config index 2414bd352..8643a2b0a 100644 --- a/package/hostapd/files/default.config +++ b/package/hostapd/files/default.config @@ -17,29 +17,16 @@ CONFIG_DRIVER_WIRED=y # Driver interface for madwifi driver CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src +#CFLAGS += -I../../madwifi # change to the madwifi source directory # Driver interface for Prism54 driver #CONFIG_DRIVER_PRISM54=y # Driver interface for drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl, probably not -# shipped with your distribution yet -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for drivers using Devicescape IEEE 802.11 stack -#CONFIG_DRIVER_DEVICESCAPE=y -# Currently, driver_devicescape.c build requires some additional parameters -# to be able to include some of the kernel header files. Following lines can -# be used to set these (WIRELESS_DEV must point to the root directory of the -# wireless-dev.git tree). -#WIRELESS_DEV=/usr/src/wireless-dev -#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 -# driver_devicescape.c requires a rather new libnl, probably not -# shipped with your distribution yet +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. #LIBNL=/usr/src/libnl #CFLAGS += -I$(LIBNL)/include #LIBS += -L$(LIBNL)/lib @@ -49,6 +36,9 @@ CONFIG_DRIVER_NL80211=y #CFLAGS += -I/usr/local/include #LIBS += -L/usr/local/lib +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + # IEEE 802.11F/IAPP CONFIG_IAPP=y @@ -91,6 +81,10 @@ CONFIG_EAP_TTLS=y # EAP-AKA for the integrated EAP server #CONFIG_EAP_AKA=y +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + # EAP-PAX for the integrated EAP server #CONFIG_EAP_PAX=y @@ -112,6 +106,17 @@ CONFIG_EAP_TTLS=y # to add the needed functions. #CONFIG_EAP_FAST=y +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y @@ -123,11 +128,17 @@ CONFIG_PKCS12=y # Build IPv6 support for RADIUS operations CONFIG_IPV6=y -# IEEE 802.11r/D4.1 (Fast BSS Transition) -# This enables an experimental implementation of a draft version of -# IEEE 802.11r. This draft is still subject to change, so it should be noted -# that this version may not comply with the final standard. +# IEEE Std 802.11r-2008 (Fast BSS Transition) #CONFIG_IEEE80211R=y +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y diff --git a/package/hostapd/files/mini.config b/package/hostapd/files/mini.config index e50fb3ce7..37f76d185 100644 --- a/package/hostapd/files/mini.config +++ b/package/hostapd/files/mini.config @@ -17,29 +17,16 @@ CONFIG_DRIVER_WIRED=y # Driver interface for madwifi driver CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src +#CFLAGS += -I../../madwifi # change to the madwifi source directory # Driver interface for Prism54 driver #CONFIG_DRIVER_PRISM54=y # Driver interface for drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl, probably not -# shipped with your distribution yet -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib - -# Driver interface for drivers using Devicescape IEEE 802.11 stack -#CONFIG_DRIVER_DEVICESCAPE=y -# Currently, driver_devicescape.c build requires some additional parameters -# to be able to include some of the kernel header files. Following lines can -# be used to set these (WIRELESS_DEV must point to the root directory of the -# wireless-dev.git tree). -#WIRELESS_DEV=/usr/src/wireless-dev -#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 -# driver_devicescape.c requires a rather new libnl, probably not -# shipped with your distribution yet +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. #LIBNL=/usr/src/libnl #CFLAGS += -I$(LIBNL)/include #LIBS += -L$(LIBNL)/lib @@ -49,6 +36,9 @@ CONFIG_DRIVER_NL80211=y #CFLAGS += -I/usr/local/include #LIBS += -L/usr/local/lib +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + # IEEE 802.11F/IAPP CONFIG_IAPP=y @@ -91,6 +81,10 @@ CONFIG_PEERKEY=y # EAP-AKA for the integrated EAP server #CONFIG_EAP_AKA=y +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + # EAP-PAX for the integrated EAP server #CONFIG_EAP_PAX=y @@ -112,6 +106,17 @@ CONFIG_PEERKEY=y # to add the needed functions. #CONFIG_EAP_FAST=y +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) #CONFIG_PKCS12=y @@ -123,11 +128,17 @@ CONFIG_PEERKEY=y # Build IPv6 support for RADIUS operations #CONFIG_IPV6=y -# IEEE 802.11r/D4.1 (Fast BSS Transition) -# This enables an experimental implementation of a draft version of -# IEEE 802.11r. This draft is still subject to change, so it should be noted -# that this version may not comply with the final standard. +# IEEE Std 802.11r-2008 (Fast BSS Transition) #CONFIG_IEEE80211R=y +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y |