add support for the new broadcom driver to wificonf. wep is currently broken. will fix that later, when i find out what's wrong with it

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2480 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 147 insertions, 0 deletions

diff --git a/package/wificonf/include/proto/bcmevent.h b/package/wificonf/include/proto/bcmevent.h
new file mode 100644
index 000000000..3d93f441b
--- /dev/null
+++ b/package/wificonf/include/proto/bcmevent.h
@@ -0,0 +1,147 @@
+/*
+ * Broadcom Event  protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ */
+
+/*
+ * Broadcom Ethernet Events protocol defines 
+ *
+ */
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define	PACKED	__attribute__((packed))
+#else
+#pragma pack(1)
+#define	PACKED
+#endif
+
+
+
+#define BCM_EVENT_MSG_VERSION	1
+#define BCM_MSG_IFNAME_MAX		16
+
+
+/* flags */
+#define WLC_EVENT_MSG_LINK		0x01
+#define WLC_EVENT_MSG_FLUSHTXQ	0x02
+#define WLC_EVENT_MSG_GROUP		0x04
+
+
+
+/* theses fields are stored in network order */
+typedef struct  
+{
+	uint16	version;
+	uint16	flags;			/* see flags below */
+	uint32	event_type;		/* Message (see below) */
+	uint32	status;			/* Status code (see below) */
+	uint32	reason;			/* Reason code (if applicable) */
+	uint32	auth_type;		/* WLC_E_AUTH */
+	uint32	datalen;		/* data buf */
+	struct ether_addr	addr;	/* Station address (if applicable) */
+	char	ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface*/
+} PACKED wl_event_msg_t;
+
+/* used by driver msgs */
+typedef struct bcm_event {
+	struct ether_header eth;
+	bcmeth_hdr_t		bcm_hdr; 
+	wl_event_msg_t		event;
+	/* data portion follows */
+} PACKED bcm_event_t;
+
+#define BCM_MSG_LEN	(sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+
+
+/* Event messages */
+#define WLC_E_SET_SSID			0	/* indicates status of set SSID */
+#define WLC_E_JOIN			1	/* differentiates join IBSS from found (WLC_E_START) IBSS */
+#define WLC_E_START			2	/* STA founded an IBSS or AP started a BSS */
+#define WLC_E_AUTH			3	/* 802.11 AUTH request */
+#define WLC_E_AUTH_IND			4	/* 802.11 AUTH indication */
+#define WLC_E_DEAUTH			5	/* 802.11 DEAUTH request */
+#define WLC_E_DEAUTH_IND		6	/* 802.11 DEAUTH indication */
+#define WLC_E_ASSOC			7	/* 802.11 ASSOC request */
+#define WLC_E_ASSOC_IND			8	/* 802.11 ASSOC indication */
+#define WLC_E_REASSOC			9	/* 802.11 REASSOC request */
+#define WLC_E_REASSOC_IND		10	/* 802.11 REASSOC indication */
+#define WLC_E_DISASSOC			11	/* 802.11 DISASSOC request */
+#define WLC_E_DISASSOC_IND		12	/* 802.11 DISASSOC indication */
+#define WLC_E_QUIET_START		13	/* 802.11h Quiet period started */
+#define WLC_E_QUIET_END			14	/* 802.11h Quiet period ended */
+#define WLC_E_GOT_BEACONS		15	/* internal use: IBSS mode: saw another STA's BEACONS */
+#define WLC_E_LINK			16	/* generic link indication */
+#define WLC_E_MIC_ERROR			17	/* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK			18	/* NDIS style link indication */
+#define WLC_E_ROAM			19	/* roam attempt occurred: indicate status & reason for roam */
+#define WLC_E_TXFAIL			20	/* change in dot11FailedCount (txfail) */
+#define WLC_E_PMKID_CACHE		21	/* WPA2 pmkid cache indication */
+#define WLC_E_RETROGRADE_TSF		22	/* current AP's TSF value went backward */
+#define WLC_E_PRUNE				23	/* AP was pruned from join list for reason */
+#define WLC_E_AUTOAUTH			24	/* report AutoAuth table entry match for join attempt */
+#define WLC_E_EAPOL_MSG			25	/* Event encapsulating an EAPOL message */
+#define WLC_E_LAST			26
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS		0
+#define WLC_E_STATUS_FAIL		1
+#define WLC_E_STATUS_TIMEOUT		2
+#define WLC_E_STATUS_NO_NETWORKS	3
+#define WLC_E_STATUS_ABORT		4
+#define WLC_E_STATUS_NO_ACK		5
+#define WLC_E_STATUS_UNSOLICITED	6
+#define WLC_E_STATUS_ATTEMPT		7
+
+/* roam reason codes */
+#define WLC_E_REASON_LOW_RSSI			1
+#define WLC_E_REASON_DEAUTH				2
+#define WLC_E_REASON_DISASSOC			3
+#define WLC_E_REASON_BCNS_LOST			4
+#define WLC_E_REASON_FAST_ROAM_FAILED	5
+
+/* prune reason codes */
+#define WLC_E_PRUNE_ENCR_MISMATCH		1	/* ecryption mismatch */
+#define WLC_E_PRUNE_BCAST_BSSID			2	/* AP uses a broadcast BSSID */
+#define WLC_E_PRUNE_MAC_DENY			3	/* STA's MAC addr is in AP's MAC deny list */
+#define WLC_E_PRUNE_MAC_NA			4	/* STA's MAC addr is not in AP's MAC allow list */
+#define WLC_E_PRUNE_REG_PASSV			5	/* AP not allowed due to regulatory restriction */
+#define WLC_E_PRUNE_SPCT_MGMT			6	/* AP does not support STA locale spectrum mgmt */
+#define WLC_E_PRUNE_RADAR			7	/* AP is on a radar channel of STA locale */
+#define WLC_E_RSN_MISMATCH			8	/* STA does not support AP's RSN */
+#define WLC_E_PRUNE_NO_COMMON_RATES		9	/* No rates in common with AP */
+#define WLC_E_PRUNE_BASIC_RATES			10	/* STA does not support all basic rates of BSS */
+#define WLC_E_PRUNE_CCXFAST_PREVAP		11	/* CCX FAST ROAM: prune previous AP */
+#define WLC_E_PRUNE_CIPHER_NA			12	/* BSS's cipher not supported */
+#define WLC_E_PRUNE_KNOWN_STA			13	/* AP is already known to us as a STA */
+
+/* WLC_SET_CALLBACK data type */
+typedef struct wlc_event_cb {
+	void (*fn)(void *, bcm_event_t *);	/* Callback function */
+	void *context;				/* Passed to callback function */
+} wlc_event_cb_t;
+
+
+
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif