[boot] move boot related packages to their own folder

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33781 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 123 deletions

diff --git a/package/uboot-xburst/files/board/nanonote/nanonote.c b/package/uboot-xburst/files/board/nanonote/nanonote.c
deleted file mode 100644
index 96a3c7da0..000000000
--- a/package/uboot-xburst/files/board/nanonote/nanonote.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 3 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/mipsregs.h>
-#include <asm/jz4740.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void gpio_init(void)
-{
-	/*
-	 * Initialize NAND Flash Pins
-	 */
-	__gpio_as_nand();
-
-	/*
-	 * Initialize SDRAM pins
-	 */
-	__gpio_as_sdram_32bit();
-
-	/*
-	 * Initialize LCD pins
-	 */
-	__gpio_as_lcd_8bit();
-
-	/*
-	 * Initialize MSC pins
-	 */
-	__gpio_as_msc();
-
-	/*
-	 * Initialize Other pins
-	 */
-	unsigned int i;
-	for (i = 0; i < 7; i++){
-		__gpio_as_input(GPIO_KEYIN_BASE + i);
-		__gpio_enable_pull(GPIO_KEYIN_BASE + i);
-	}
-
-	for (i = 0; i < 8; i++) {
-		__gpio_as_output(GPIO_KEYOUT_BASE + i);
-		__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
-	}
-
-	/*
-	 * Initialize UART0 pins, in Ben NanoNote uart0 and keyin8 use the
-	 * same gpio, init the gpio as uart0 cause a keyboard bug. so for
-	 * end user we disable the uart0
-	 */
-	if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
-		/* if pressed [S] */
-		printf("[S] pressed, enable UART0\n");
-		gd->boot_option = 5;
-		__gpio_as_uart0();
-	} else {
-		printf("[S] not pressed, disable UART0\n");
-		__gpio_as_input(GPIO_KEYIN_8);
-		__gpio_enable_pull(GPIO_KEYIN_8);
-	}
-
-	__gpio_as_output(GPIO_AUDIO_POP);
-	__gpio_set_pin(GPIO_AUDIO_POP);
-
-	__gpio_as_output(GPIO_LCD_CS);
-	__gpio_clear_pin(GPIO_LCD_CS);
-
-	__gpio_as_output(GPIO_AMP_EN);
-	__gpio_clear_pin(GPIO_AMP_EN);
-
-	__gpio_as_output(GPIO_SDPW_EN);
-	__gpio_disable_pull(GPIO_SDPW_EN);
-	__gpio_clear_pin(GPIO_SDPW_EN);
-
-	__gpio_as_input(GPIO_SD_DETECT);
-	__gpio_disable_pull(GPIO_SD_DETECT);
-
-	__gpio_as_input(GPIO_USB_DETECT);
-	__gpio_enable_pull(GPIO_USB_DETECT);
-
-	if (__gpio_get_pin(GPIO_KEYIN_BASE + 3) == 0) {
-		printf("[M] pressed, boot from sd card\n");
-		gd->boot_option = 1;
-	}
-}
-
-static void cpm_init(void)
-{
-	__cpm_stop_ipu();
-	__cpm_stop_cim();
-	__cpm_stop_i2c();
-	__cpm_stop_ssi();
-	__cpm_stop_uart1();
-	__cpm_stop_sadc();
-	__cpm_stop_uhc();
-	__cpm_stop_udc();
-	__cpm_stop_aic1();
-/*	__cpm_stop_aic2();*/
-}
-
-void board_early_init(void)
-{
-	gpio_init();
-	cpm_init();
-}
-
-/* U-Boot common routines */
-
-int checkboard (void)
-{
-
-	printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %d MHz)\n",
-	       gd->cpu_clk/1000000);
-
-	return 0; /* success */
-}