[uboot-lantiq] add support for arv4518 and arv752DWP22 boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25071 3c298f89-4303-0410-b956-a3cf2f4a3e73

19 files changed, 3756 insertions, 0 deletions

diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile
new file mode 100644
index 000000000..61f383b8d
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+#COBJS	:= $(BOARD).o
+COBJS-y	+= arv4518.o
+
+SOBJS	= lowlevel_init.o pmuenable.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c b/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c
new file mode 100644
index 000000000..c015dd701
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c
@@ -0,0 +1,334 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/addrspace.h>
+#include <asm/danube.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+#if defined(CONFIG_CMD_HTTPD)
+#include <httpd.h>
+#endif
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+
+extern ulong ifx_get_ddr_hz(void);
+extern ulong ifx_get_cpuclk(void);
+
+/* IDs and registers of known external switches */
+#define ID_RTL8306	0x5988
+#define CONFIG_EXTRA_SWITCH 1
+void _machine_restart(void)
+{
+	*DANUBE_RCU_RST_REQ |=1<<30;
+}
+
+#ifdef CONFIG_SYS_RAMBOOT
+phys_size_t initdram(int board_type)
+{
+	return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
+}
+#elif defined(CONFIG_USE_DDR_RAM)
+phys_size_t initdram(int board_type)
+{
+	return (CONFIG_SYS_MAX_RAM);
+}
+#else
+
+static ulong max_sdram_size(void)     /* per Chip Select */
+{
+	/* The only supported SDRAM data width is 16bit.
+	 */
+#define CFG_DW	4
+
+	/* The only supported number of SDRAM banks is 4.
+	 */
+#define CFG_NB	4
+
+	ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
+	int   cols   = cfgpb0 & 0xF;
+	int   rows   = (cfgpb0 & 0xF0) >> 4;
+	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+	return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+phys_size_t initdram(int board_type)
+{
+	int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
+	ulong size, max_size       = 0;
+	ulong our_address;
+
+	/* load t9 into our_address */
+	asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+	/* Can't probe for RAM size unless we are running from Flash.
+	 * find out whether running from DRAM or Flash.
+	 */
+	if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
+	{
+		return max_sdram_size();
+	}
+
+	for (cols = 0x8; cols <= 0xC; cols++)
+	{
+		for (rows = 0xB; rows <= 0xD; rows++)
+		{
+			*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+			                          (rows << 4) | cols;
+			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+			                          max_sdram_size());
+
+			if (size > max_size)
+			{
+				best_val = *DANUBE_SDRAM_MC_CFGPB0;
+				max_size = size;
+			}
+		}
+	}
+
+	*DANUBE_SDRAM_MC_CFGPB0 = best_val;
+	return max_size;
+}
+#endif
+
+int checkboard (void)
+{
+	unsigned long chipid = *DANUBE_MPS_CHIPID;
+	int part_num;
+
+	puts ("Board: ");
+
+	part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
+	switch (part_num)
+	{
+	case 0x129:
+	case 0x12D:
+	case 0x12b: 
+		puts("Danube/Twinpass/Vinax-VE ");
+		break;
+	default:
+		printf ("unknown, chip part number 0x%03X ", part_num);
+		break;
+	}
+	printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
+
+	printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
+	printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
+
+	return 0;
+}
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+int board_early_init_f(void)
+{
+#ifdef CONFIG_EBU_ADDSEL0
+	(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
+#endif
+#ifdef CONFIG_EBU_ADDSEL1
+	(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
+#endif
+#ifdef CONFIG_EBU_ADDSEL2
+	(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
+#endif
+#ifdef CONFIG_EBU_ADDSEL3
+	(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
+#endif
+#ifdef CONFIG_EBU_BUSCON0
+	(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
+#endif
+#ifdef CONFIG_EBU_BUSCON1
+	(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
+#endif
+#ifdef CONFIG_EBU_BUSCON2
+	(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
+#endif
+#ifdef CONFIG_EBU_BUSCON3
+	(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+
+#ifdef CONFIG_EXTRA_SWITCH
+static int external_switch_init(void)
+{
+	unsigned short chipid;
+	static char * const name = "lq_cpe_eth";
+
+	/* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
+	udelay(100000);
+
+	puts("\nsearching for rtl8306 switch ... ");
+	if (miiphy_read(name, 4, 30, &chipid) == 0) {
+		puts("s1\n");
+		if (chipid == ID_RTL8306) {
+			puts("found");
+			/* set led mode */
+			miiphy_write(name, 0, 19, 0xffff);
+			/* magic */
+			miiphy_write(name, 4, 22, 0x877f);
+			puts("\n");
+			return 0;
+		}
+		puts("failed\n");
+	}
+	puts("\nno known switch found ... \n");
+
+	return 0;
+}
+#endif /* CONFIG_EXTRA_SWITCH */
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_IFX_ETOP)
+	uchar enetaddr[6];
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
+
+	*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
+	*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+
+	if (lq_eth_initialize(bis))
+		return -1;
+
+	*DANUBE_RCU_RST_REQ |=1;
+	udelay(200000);
+	*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+	udelay(1000);
+
+#ifdef CONFIG_EXTRA_SWITCH
+	if (external_switch_init()<0)
+		return -1;
+#endif /* CONFIG_EXTRA_SWITCH */
+#endif /* CONFIG_IFX_ETOP */
+
+	return 0;
+}
+
+#if defined(CONFIG_CMD_HTTPD)
+int do_http_upgrade(const unsigned char *data, const ulong size)
+{
+	char buf[128];
+
+	if(getenv ("ram_addr") == NULL)
+		return -1;
+	if(getenv ("kernel_addr") == NULL)
+		return -1;
+	/* check the image */
+	if(run_command("imi ${ram_addr}", 0) < 0) {
+		return -1;
+	}
+	/* write the image to the flash */
+	puts("http ugrade ...\n");
+	sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
+	return run_command(buf, 0);
+}
+
+int do_http_progress(const int state)
+{
+	/* toggle LED's here */
+	switch(state) {
+		case HTTP_PROGRESS_START:
+		puts("http start\n");
+		break;
+		case HTTP_PROGRESS_TIMEOUT:
+		puts(".");
+		break;
+		case HTTP_PROGRESS_UPLOAD_READY:
+		puts("http upload ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_READY:
+		puts("http ugrade ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_FAILED:
+		puts("http ugrade failed\n");
+		break;
+	}
+	return 0;
+}
+
+unsigned long do_http_tmp_address(void)
+{
+	char *s = getenv ("ram_addr");
+	if (s) {
+		ulong tmp = simple_strtoul (s, NULL, 16);
+		return tmp;
+	}
+	return 0 /*0x80a00000*/;
+}
+
+#endif
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk
new file mode 100644
index 000000000..c0e5d8244
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Danube board with MIPS 24Kc CPU core
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifdef CONFIG_LZMA_BOOTSTRAP
+
+ifdef BUILD_BOOTSTRAP
+
+$(info BUILD_BOOTSTRAP )
+#TEXT_BASE = 0xB0000000
+TEXT_BASE = 0x80010000
+
+else # BUILD_BOOTSTRAP
+
+ifndef TEXT_BASE
+$(info redefine TEXT_BASE = 0x80040000 )
+TEXT_BASE = 0x80040000
+endif
+
+endif # BUILD_BOOTSTRAP
+
+else
+
+ifdef BUILD_BOOTSTRAP
+$(error BUILD_BOOTSTRAP but not enabled in config)
+endif
+
+ifndef TEXT_BASE
+## Standard: boot from ebu
+$(info redefine TEXT_BASE = 0xB0000000 )
+TEXT_BASE = 0xB0000000
+## For testing: boot from RAM
+# TEXT_BASE = 0x80100000
+endif
+
+endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h
new file mode 100644
index 000000000..4df6f1170
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
+
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0x130  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x301
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA03  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1b00
+#define MC_DC22_VALUE	0x1b1b
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x59   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x4e20
+#define MC_DC30_VALUE	0x8235
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S
new file mode 100644
index 000000000..c4570d015
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S
@@ -0,0 +1,622 @@
+/*
+ *  Memory sub-system initialization code for Danube board.
+ *  Andre Messerschmidt
+ *  Copyright (c) 2005	Infineon Technologies AG
+ *
+ *  Based on Inca-IP code
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* History:
+      peng liu May 25, 2006, for PLL setting after reset, 05252006
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#if 0
+
+#if defined(CONFIG_USE_DDR_RAM)
+
+#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
+#include "ddr_settings_r111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
+#include "ddr_settings_r166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
+#include "ddr_settings_e111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
+#include "ddr_settings_e166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
+#include "ddr_settings_PROMOSDDR400.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
+#include "ddr_settings_Samsung_166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
+#include "ddr_settings_psc_166.h"
+#define DDR166
+#else
+#warning "missing definition for ddr_settings.h, use default!"
+#include "ddr_settings.h"
+#endif
+#endif /* CONFIG_USE_DDR_RAM */
+
+#else
+
+#include "ddr_settings.h"
+#define DDR166
+
+#endif
+
+#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
+#error "missing include of ddr_settings.h"
+#endif
+
+#define EBU_MODUL_BASE		0xBE105300
+#define EBU_CLC(value)		0x0000(value)
+#define EBU_CON(value)		0x0010(value)
+#define EBU_ADDSEL0(value)	0x0020(value)
+#define EBU_ADDSEL1(value)	0x0024(value)
+#define EBU_ADDSEL2(value)	0x0028(value)
+#define EBU_ADDSEL3(value)	0x002C(value)
+#define EBU_BUSCON0(value)	0x0060(value)
+#define EBU_BUSCON1(value)	0x0064(value)
+#define EBU_BUSCON2(value)	0x0068(value)
+#define EBU_BUSCON3(value)	0x006C(value)
+
+#define MC_MODUL_BASE		0xBF800000
+#define MC_ERRCAUSE(value)	0x0010(value)
+#define MC_ERRADDR(value)	0x0020(value)
+#define MC_CON(value)		0x0060(value)
+
+#define MC_SRAM_ENABLE		0x00000004
+#define MC_SDRAM_ENABLE		0x00000002
+#define MC_DDRRAM_ENABLE	0x00000001
+
+#define MC_SDR_MODUL_BASE	0xBF800200
+#define MC_IOGP(value)		0x0000(value)
+#define MC_CTRLENA(value)	0x0010(value)
+#define MC_MRSCODE(value)	0x0020(value)
+#define MC_CFGDW(value)		0x0030(value)
+#define MC_CFGPB0(value)	0x0040(value)
+#define MC_LATENCY(value)	0x0080(value)
+#define MC_TREFRESH(value)	0x0090(value)
+#define MC_SELFRFSH(value)	0x00A0(value)
+
+#define MC_DDR_MODUL_BASE	0xBF801000
+#define MC_DC00(value)		0x0000(value)
+#define MC_DC01(value)		0x0010(value)
+#define MC_DC02(value)		0x0020(value)
+#define MC_DC03(value)		0x0030(value)
+#define MC_DC04(value)		0x0040(value)
+#define MC_DC05(value)		0x0050(value)
+#define MC_DC06(value)		0x0060(value)
+#define MC_DC07(value)		0x0070(value)
+#define MC_DC08(value)		0x0080(value)
+#define MC_DC09(value)		0x0090(value)
+#define MC_DC10(value)		0x00A0(value)
+#define MC_DC11(value)		0x00B0(value)
+#define MC_DC12(value)		0x00C0(value)
+#define MC_DC13(value)		0x00D0(value)
+#define MC_DC14(value)		0x00E0(value)
+#define MC_DC15(value)		0x00F0(value)
+#define MC_DC16(value)		0x0100(value)
+#define MC_DC17(value)		0x0110(value)
+#define MC_DC18(value)		0x0120(value)
+#define MC_DC19(value)		0x0130(value)
+#define MC_DC20(value)		0x0140(value)
+#define MC_DC21(value)		0x0150(value)
+#define MC_DC22(value)		0x0160(value)
+#define MC_DC23(value)		0x0170(value)
+#define MC_DC24(value)		0x0180(value)
+#define MC_DC25(value)		0x0190(value)
+#define MC_DC26(value)		0x01A0(value)
+#define MC_DC27(value)		0x01B0(value)
+#define MC_DC28(value)		0x01C0(value)
+#define MC_DC29(value)		0x01D0(value)
+#define MC_DC30(value)		0x01E0(value)
+#define MC_DC31(value)		0x01F0(value)
+#define MC_DC32(value)		0x0200(value)
+#define MC_DC33(value)		0x0210(value)
+#define MC_DC34(value)		0x0220(value)
+#define MC_DC35(value)		0x0230(value)
+#define MC_DC36(value)		0x0240(value)
+#define MC_DC37(value)		0x0250(value)
+#define MC_DC38(value)		0x0260(value)
+#define MC_DC39(value)		0x0270(value)
+#define MC_DC40(value)		0x0280(value)
+#define MC_DC41(value)		0x0290(value)
+#define MC_DC42(value)		0x02A0(value)
+#define MC_DC43(value)		0x02B0(value)
+#define MC_DC44(value)		0x02C0(value)
+#define MC_DC45(value)		0x02D0(value)
+#define MC_DC46(value)		0x02E0(value)
+
+#define RCU_OFFSET  0xBF203000
+#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
+#define RCU_STS          (RCU_OFFSET + 0x0014)
+
+#define CGU_OFFSET  0xBF103000
+#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
+#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
+#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
+#define  CGU_SYS      (CGU_OFFSET + 0x0010)
+#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
+#define  IF_CLK       (CGU_OFFSET + 0x0018)
+#define  CGU_SMD      (CGU_OFFSET + 0x0020)
+#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
+#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
+#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
+#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
+#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
+#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
+#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
+
+//05252006
+#define  pll0_35MHz_CONFIG 0x9D861059
+#define  pll1_35MHz_CONFIG 0x1A260CD9
+#define  pll2_35MHz_CONFIG 0x8000f1e5
+#define  pll0_36MHz_CONFIG 0x1000125D
+#define  pll1_36MHz_CONFIG 0x1B1E0C99
+#define  pll2_36MHz_CONFIG 0x8002f2a1
+//05252006
+
+//06063001-joelin disable the PCI CFRAME mask -start
+/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
+But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
+
+The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
+The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
+*/
+#define PCI_CR_PR_OFFSET  0xBE105400
+#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CONFIG_SPACE  0xB7000000
+#define CS_CFM		(PCI_CONFIG_SPACE + 0x6C)
+//06063001-joelin disable the PCI CFRAME mask -end
+	.set	noreorder
+
+
+/*
+ * void ebu_init(void)
+ */
+	.globl	ebu_init
+	.ent	ebu_init
+ebu_init:
+
+#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
+	defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
+	defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
+	defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
+
+	li	t1, EBU_MODUL_BASE
+#if defined(CONFIG_EBU_ADDSEL0)
+	li	t2, CONFIG_EBU_ADDSEL0
+	sw	t2, EBU_ADDSEL0(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL1)
+	li	t2, CONFIG_EBU_ADDSEL1
+	sw	t2, EBU_ADDSEL1(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL2)
+	li	t2, CONFIG_EBU_ADDSEL2
+	sw	t2, EBU_ADDSEL2(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL3)
+	li	t2, CONFIG_EBU_ADDSEL3
+	sw	t2, EBU_ADDSEL3(t1)
+#endif
+
+#if defined(CONFIG_EBU_BUSCON0)
+	li	t2, CONFIG_EBU_BUSCON0
+	sw	t2, EBU_BUSCON0(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON1)
+	li	t2, CONFIG_EBU_BUSCON1
+	sw	t2, EBU_BUSCON1(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON2)
+	li	t2, CONFIG_EBU_BUSCON2
+	sw	t2, EBU_BUSCON2(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON3)
+	li	t2, CONFIG_EBU_BUSCON3
+	sw	t2, EBU_BUSCON3(t1)
+#endif
+
+#endif
+
+	j	ra
+	nop
+
+	.end	ebu_init
+
+
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	cgu_init
+	.ent	cgu_init
+cgu_init:
+	li  t2, CGU_SYS
+	lw  t2,0(t2)
+	beq t2,a0,freq_up2date
+	nop
+
+	li  t2, RCU_STS
+	lw  t2, 0(t2)
+	and t2,0x00020000
+	beq t2,0x00020000,boot_36MHZ
+	nop
+//05252006
+	li  t1, PLL0_CFG
+	li  t2, pll0_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+	b   wait_reset
+	nop
+boot_36MHZ:
+	li  t1, PLL0_CFG
+	li  t2, pll0_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+//05252006
+
+wait_reset:
+	b   wait_reset
+	nop
+freq_up2date:
+	j ra
+	nop
+
+	.end	cgu_init
+
+#ifndef CONFIG_USE_DDR_RAM
+/*
+ * void sdram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	sdram_init
+	.ent	sdram_init
+sdram_init:
+
+	/* SDRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable SDRAM module in memory controller */
+	li	t3, MC_SDRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_SDR_MODUL_BASE
+
+	/* disable the controller */
+	li	t2, 0
+	sw	t2, MC_CTRLENA(t1)
+
+	li	t2, 0x822
+	sw	t2, MC_IOGP(t1)
+
+	li	t2, 0x2
+	sw	t2, MC_CFGDW(t1)
+
+	/* Set CAS Latency */
+	li	t2, 0x00000020
+	sw	t2, MC_MRSCODE(t1)
+
+	/* Set CS0 to SDRAM parameters */
+	li	t2, 0x000014d8
+	sw	t2, MC_CFGPB0(t1)
+
+	/* Set SDRAM latency parameters */
+	li  	t2, 0x00036325;   /* BC PC100 */
+	sw	t2, MC_LATENCY(t1)
+
+	/* Set SDRAM refresh rate */
+	li	t2, 0x00000C30
+	sw	t2, MC_TREFRESH(t1)
+
+	/* Clear Power-down registers */
+	sw	zero, MC_SELFRFSH(t1)
+
+	/* Finally enable the controller */
+	li	t2, 1
+	sw	t2, MC_CTRLENA(t1)
+
+	j	ra
+	nop
+
+	.end	sdram_init
+
+#endif /* !CONFIG_USE_DDR_RAM */
+
+#ifdef CONFIG_USE_DDR_RAM
+/*
+ * void ddrram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	ddrram_init
+	.ent	ddrram_init
+ddrram_init:
+
+	/* DDR-DRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable DDR module in memory controller */
+	li	t3, MC_DDRRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_DDR_MODUL_BASE
+
+	/* Write configuration to DDR controller registers */
+	li	t2, MC_DC0_VALUE
+	sw	t2, MC_DC00(t1)
+
+	li	t2, MC_DC1_VALUE
+	sw	t2, MC_DC01(t1)
+
+	li	t2, MC_DC2_VALUE
+	sw	t2, MC_DC02(t1)
+
+	li	t2, MC_DC3_VALUE
+	sw	t2, MC_DC03(t1)
+
+	li	t2, MC_DC4_VALUE
+	sw	t2, MC_DC04(t1)
+
+	li	t2, MC_DC5_VALUE
+	sw	t2, MC_DC05(t1)
+
+	li	t2, MC_DC6_VALUE
+	sw	t2, MC_DC06(t1)
+
+	li	t2, MC_DC7_VALUE
+	sw	t2, MC_DC07(t1)
+
+	li	t2, MC_DC8_VALUE
+	sw	t2, MC_DC08(t1)
+
+	li	t2, MC_DC9_VALUE
+	sw	t2, MC_DC09(t1)
+
+	li	t2, MC_DC10_VALUE
+	sw	t2, MC_DC10(t1)
+
+	li	t2, MC_DC11_VALUE
+	sw	t2, MC_DC11(t1)
+
+	li	t2, MC_DC12_VALUE
+	sw	t2, MC_DC12(t1)
+
+	li	t2, MC_DC13_VALUE
+	sw	t2, MC_DC13(t1)
+
+	li	t2, MC_DC14_VALUE
+	sw	t2, MC_DC14(t1)
+
+	li	t2, MC_DC15_VALUE
+	sw	t2, MC_DC15(t1)
+
+	li	t2, MC_DC16_VALUE
+	sw	t2, MC_DC16(t1)
+
+	li	t2, MC_DC17_VALUE
+	sw	t2, MC_DC17(t1)
+
+	li	t2, MC_DC18_VALUE
+	sw	t2, MC_DC18(t1)
+
+	li	t2, MC_DC19_VALUE
+	sw	t2, MC_DC19(t1)
+
+	li	t2, MC_DC20_VALUE
+	sw	t2, MC_DC20(t1)
+
+	li	t2, MC_DC21_VALUE
+	sw	t2, MC_DC21(t1)
+
+	li	t2, MC_DC22_VALUE
+	sw	t2, MC_DC22(t1)
+
+	li	t2, MC_DC23_VALUE
+	sw	t2, MC_DC23(t1)
+
+	li	t2, MC_DC24_VALUE
+	sw	t2, MC_DC24(t1)
+
+	li	t2, MC_DC25_VALUE
+	sw	t2, MC_DC25(t1)
+
+	li	t2, MC_DC26_VALUE
+	sw	t2, MC_DC26(t1)
+
+	li	t2, MC_DC27_VALUE
+	sw	t2, MC_DC27(t1)
+
+	li	t2, MC_DC28_VALUE
+	sw	t2, MC_DC28(t1)
+
+	li	t2, MC_DC29_VALUE
+	sw	t2, MC_DC29(t1)
+
+	li	t2, MC_DC30_VALUE
+	sw	t2, MC_DC30(t1)
+
+	li	t2, MC_DC31_VALUE
+	sw	t2, MC_DC31(t1)
+
+	li	t2, MC_DC32_VALUE
+	sw	t2, MC_DC32(t1)
+
+	li	t2, MC_DC33_VALUE
+	sw	t2, MC_DC33(t1)
+
+	li	t2, MC_DC34_VALUE
+	sw	t2, MC_DC34(t1)
+
+	li	t2, MC_DC35_VALUE
+	sw	t2, MC_DC35(t1)
+
+	li	t2, MC_DC36_VALUE
+	sw	t2, MC_DC36(t1)
+
+	li	t2, MC_DC37_VALUE
+	sw	t2, MC_DC37(t1)
+
+	li	t2, MC_DC38_VALUE
+	sw	t2, MC_DC38(t1)
+
+	li	t2, MC_DC39_VALUE
+	sw	t2, MC_DC39(t1)
+
+	li	t2, MC_DC40_VALUE
+	sw	t2, MC_DC40(t1)
+
+	li	t2, MC_DC41_VALUE
+	sw	t2, MC_DC41(t1)
+
+	li	t2, MC_DC42_VALUE
+	sw	t2, MC_DC42(t1)
+
+	li	t2, MC_DC43_VALUE
+	sw	t2, MC_DC43(t1)
+
+	li	t2, MC_DC44_VALUE
+	sw	t2, MC_DC44(t1)
+
+	li	t2, MC_DC45_VALUE
+	sw	t2, MC_DC45(t1)
+
+	li	t2, MC_DC46_VALUE
+	sw	t2, MC_DC46(t1)
+
+	li	t2, 0x00000100
+	sw	t2, MC_DC03(t1)
+
+	j	ra
+	nop
+
+	.end	ddrram_init
+#endif /* CONFIG_USE_DDR_RAM */
+
+	.globl	lowlevel_init
+	.ent	lowlevel_init
+lowlevel_init:
+	/* EBU, CGU and SDRAM/DDR-RAM Initialization.
+	 */
+	move	t0, ra
+	/* We rely on the fact that non of the following ..._init() functions
+	 * modify t0
+	 */
+#if defined(CONFIG_SYS_EBU_BOOT)
+#if defined(DDR166)
+	/* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
+	li  a0,0xe8
+#elif defined(DDR133)
+	/* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
+	li  a0,0xe9
+#else /* defined(DDR111) */
+	/* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
+	li  a0,0xea
+#endif
+	bal	cgu_init
+	nop
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	bal	ebu_init
+	nop
+
+//06063001-joelin disable the PCI CFRAME mask-start
+#ifdef DISABLE_CFRAME
+	li  t1, PCI_CR_PCI	//mw bf103034 80000000
+	li  t2, 0x80000000
+	sw	t2,0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x103
+	sw  t2,0(t1)
+
+	li  t1, CS_CFM			//mw b700006c 0
+	li  t2, 0x00
+	sw  t2, 0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x1000103
+	sw  t2, 0(t1)
+#endif
+//06063001-joelin disable the PCI CFRAME mask-end
+
+#ifdef CONFIG_SYS_EBU_BOOT
+#ifndef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_USE_DDR_RAM
+	bal	ddrram_init
+	nop
+#else
+	bal	sdram_init
+	nop
+#endif
+#endif /* CONFIG_SYS_RAMBOOT */
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	move	ra, t0
+	j	ra
+	nop
+
+	.end	lowlevel_init
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S
new file mode 100644
index 000000000..e0d7971d8
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S
@@ -0,0 +1,48 @@
+/*
+ *  Power Management unit initialization code for AMAZON development board.
+ *
+ *  Copyright (c) 2003	Ou Ke, Infineon.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#define PMU_PWDCR 		0xBF10201C
+#define PMU_SR			0xBF102020
+
+	.globl	pmuenable
+
+pmuenable:
+	li      t0, PMU_PWDCR
+	li      t1, 0x2		/* enable everything */
+	sw      t1, 0(t0)
+#if 0
+1:
+	li	t0, PMU_SR
+	lw      t2, 0(t0)
+	bne     t1, t2, 1b
+	nop
+#endif
+	j	ra
+	nop
+
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds
new file mode 100644
index 000000000..9a6cd1b8a
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss (NOLOAD)  : { *(.sbss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
+	uboot_end = .;
+}
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile
new file mode 100644
index 000000000..2d0115f8e
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+#COBJS	:= $(BOARD).o
+COBJS-y	+= arv752.o athrs26_phy.o
+
+SOBJS	= lowlevel_init.o pmuenable.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c
new file mode 100644
index 000000000..5b68de958
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c
@@ -0,0 +1,325 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/addrspace.h>
+#include <asm/danube.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+#if defined(CONFIG_CMD_HTTPD)
+#include <httpd.h>
+#endif
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#include "athrs26_phy.h"
+
+extern ulong ifx_get_ddr_hz(void);
+extern ulong ifx_get_cpuclk(void);
+
+/* IDs and registers of known external switches */
+void _machine_restart(void)
+{
+	*DANUBE_RCU_RST_REQ |=1<<30;
+}
+
+#ifdef CONFIG_SYS_RAMBOOT
+phys_size_t initdram(int board_type)
+{
+	return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
+}
+#elif defined(CONFIG_USE_DDR_RAM)
+phys_size_t initdram(int board_type)
+{
+	return (CONFIG_SYS_MAX_RAM);
+}
+#else
+
+static ulong max_sdram_size(void)     /* per Chip Select */
+{
+	/* The only supported SDRAM data width is 16bit.
+	 */
+#define CFG_DW	4
+
+	/* The only supported number of SDRAM banks is 4.
+	 */
+#define CFG_NB	4
+
+	ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
+	int   cols   = cfgpb0 & 0xF;
+	int   rows   = (cfgpb0 & 0xF0) >> 4;
+	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+	return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+phys_size_t initdram(int board_type)
+{
+	int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
+	ulong size, max_size       = 0;
+	ulong our_address;
+
+	/* load t9 into our_address */
+	asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+	/* Can't probe for RAM size unless we are running from Flash.
+	 * find out whether running from DRAM or Flash.
+	 */
+	if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
+	{
+		return max_sdram_size();
+	}
+
+	for (cols = 0x8; cols <= 0xC; cols++)
+	{
+		for (rows = 0xB; rows <= 0xD; rows++)
+		{
+			*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+			                          (rows << 4) | cols;
+			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+			                          max_sdram_size());
+
+			if (size > max_size)
+			{
+				best_val = *DANUBE_SDRAM_MC_CFGPB0;
+				max_size = size;
+			}
+		}
+	}
+
+	*DANUBE_SDRAM_MC_CFGPB0 = best_val;
+	return max_size;
+}
+#endif
+
+int checkboard (void)
+{
+	unsigned long chipid = *DANUBE_MPS_CHIPID;
+	int part_num;
+
+	puts ("Board: ARV75DW22 - Easybox 803\n");
+	puts ("SoC: ");
+
+	part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
+	switch (part_num)
+	{
+	case 0x129:
+	case 0x12D:
+	case 0x12b: 
+		puts("Danube/Twinpass/Vinax-VE ");
+		break;
+	default:
+		printf ("unknown, chip part number 0x%03X ", part_num);
+		break;
+	}
+	printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
+
+	printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
+	printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
+
+	return 0;
+}
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+int board_early_init_f(void)
+{
+#ifdef CONFIG_EBU_ADDSEL0
+	(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
+#endif
+#ifdef CONFIG_EBU_ADDSEL1
+	(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
+#endif
+#ifdef CONFIG_EBU_ADDSEL2
+	(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
+#endif
+#ifdef CONFIG_EBU_ADDSEL3
+	(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
+#endif
+#ifdef CONFIG_EBU_BUSCON0
+	(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
+#endif
+#ifdef CONFIG_EBU_BUSCON1
+	(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
+#endif
+#ifdef CONFIG_EBU_BUSCON2
+	(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
+#endif
+#ifdef CONFIG_EBU_BUSCON3
+	(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
+#endif
+
+	return 0;
+}
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+
+#ifdef CONFIG_EXTRA_SWITCH
+static int external_switch_init(void)
+{
+	// switch reset pin on arv752
+	*DANUBE_GPIO_P1_ALTSEL0 &= ~8;
+	*DANUBE_GPIO_P1_ALTSEL1 &= ~8;
+	*DANUBE_GPIO_P1_OD |= 8;
+	*DANUBE_GPIO_P1_DIR |= 8;
+	*DANUBE_GPIO_P1_OUT |= 8;
+
+	puts("initializing ar8216 switch... ");
+	if (athrs26_phy_setup(0)==0) {
+	   printf("initialized\n");
+	   return 0;
+	}
+	puts("failed ... \n");
+	return 0;
+}
+#endif /* CONFIG_EXTRA_SWITCH */
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_IFX_ETOP)
+	uchar enetaddr[6];
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
+
+	*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
+	*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+
+	if (lq_eth_initialize(bis))
+		return -1;
+
+	*DANUBE_RCU_RST_REQ |=1;
+	udelay(200000);
+	*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+	udelay(1000);
+
+#ifdef CONFIG_EXTRA_SWITCH
+	if (external_switch_init()<0)
+		return -1;
+#endif /* CONFIG_EXTRA_SWITCH */
+#endif /* CONFIG_IFX_ETOP */
+
+	return 0;
+}
+
+#if defined(CONFIG_CMD_HTTPD)
+int do_http_upgrade(const unsigned char *data, const ulong size)
+{
+	char buf[128];
+
+	if(getenv ("ram_addr") == NULL)
+		return -1;
+	if(getenv ("kernel_addr") == NULL)
+		return -1;
+	/* check the image */
+	if(run_command("imi ${ram_addr}", 0) < 0) {
+		return -1;
+	}
+	/* write the image to the flash */
+	puts("http ugrade ...\n");
+	sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
+	return run_command(buf, 0);
+}
+
+int do_http_progress(const int state)
+{
+	/* toggle LED's here */
+	switch(state) {
+		case HTTP_PROGRESS_START:
+		puts("http start\n");
+		break;
+		case HTTP_PROGRESS_TIMEOUT:
+		puts(".");
+		break;
+		case HTTP_PROGRESS_UPLOAD_READY:
+		puts("http upload ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_READY:
+		puts("http ugrade ready\n");
+		break;
+		case HTTP_PROGRESS_UGRADE_FAILED:
+		puts("http ugrade failed\n");
+		break;
+	}
+	return 0;
+}
+
+unsigned long do_http_tmp_address(void)
+{
+	char *s = getenv ("ram_addr");
+	if (s) {
+		ulong tmp = simple_strtoul (s, NULL, 16);
+		return tmp;
+	}
+	return 0 /*0x80a00000*/;
+}
+
+#endif
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c
new file mode 100644
index 000000000..2f80ee05e
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c
@@ -0,0 +1,814 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ */
+
+/*
+ * Manage the atheros ethernet PHY.
+ *
+ * All definitions in this file are operating system independent!
+ */
+
+#include <config.h>
+#include <linux/types.h>
+#include <common.h>
+#include <miiphy.h>
+//#include "phy.h"
+//#include "ar7100_soc.h"
+#include "athrs26_phy.h"
+
+#define phy_reg_read(base, addr, reg, datap)                    \
+    miiphy_read("lq_cpe_eth", addr, reg, datap);
+#define phy_reg_write(base, addr, reg, data)                   \
+    miiphy_write("lq_cpe_eth", addr, reg, data);
+            
+
+/* PHY selections and access functions */
+
+typedef enum {
+    PHY_SRCPORT_INFO, 
+    PHY_PORTINFO_SIZE,
+} PHY_CAP_TYPE;
+
+typedef enum {
+    PHY_SRCPORT_NONE,
+    PHY_SRCPORT_VLANTAG, 
+    PHY_SRCPORT_TRAILER,
+} PHY_SRCPORT_TYPE;
+
+#ifdef DEBUG
+#define DRV_DEBUG 1
+#endif
+//#define DRV_DEBUG 1
+
+#define DRV_DEBUG_PHYERROR  0x00000001
+#define DRV_DEBUG_PHYCHANGE 0x00000002
+#define DRV_DEBUG_PHYSETUP  0x00000004
+
+#if DRV_DEBUG
+int athrPhyDebug = DRV_DEBUG_PHYERROR|DRV_DEBUG_PHYCHANGE|DRV_DEBUG_PHYSETUP;
+
+#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6)    \
+{                                                   \
+    if (athrPhyDebug & (FLG)) {                       \
+        logMsg(X0, X1, X2, X3, X4, X5, X6);         \
+    }                                               \
+}
+
+#define DRV_MSG(x,a,b,c,d,e,f)                      \
+    logMsg(x,a,b,c,d,e,f)
+
+#define DRV_PRINT(FLG, X)                           \
+{                                                   \
+    if (athrPhyDebug & (FLG)) {                       \
+        printf X;                                   \
+    }                                               \
+}
+
+#else /* !DRV_DEBUG */
+#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6)
+#define DRV_MSG(x,a,b,c,d,e,f)
+#define DRV_PRINT(DBG_SW,X)
+#endif
+
+#define ATHR_LAN_PORT_VLAN          1
+#define ATHR_WAN_PORT_VLAN          2
+
+#define ENET_UNIT_LAN 0
+
+#define TRUE    1
+#define FALSE   0
+
+#define ATHR_PHY0_ADDR   0x0
+#define ATHR_PHY1_ADDR   0x1
+#define ATHR_PHY2_ADDR   0x2
+#define ATHR_PHY3_ADDR   0x3
+#define ATHR_PHY4_ADDR   0x4
+
+/*
+ * Track per-PHY port information.
+ */
+typedef struct {
+    BOOL   isEnetPort;       /* normal enet port */
+    BOOL   isPhyAlive;       /* last known state of link */
+    int    ethUnit;          /* MAC associated with this phy port */
+    uint32_t phyBase;
+    uint32_t phyAddr;          /* PHY registers associated with this phy port */
+    uint32_t VLANTableSetting; /* Value to be written to VLAN table */
+} athrPhyInfo_t;
+
+/*
+ * Per-PHY information, indexed by PHY unit number.
+ */
+static athrPhyInfo_t athrPhyInfo[] = {
+    {TRUE,   /* phy port 0 -- LAN port 0 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY0_ADDR,
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 1 -- LAN port 1 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY1_ADDR,
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 2 -- LAN port 2 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY2_ADDR, 
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 3 -- LAN port 3 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY3_ADDR, 
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
+     FALSE,
+     1,
+     0,
+     ATHR_PHY4_ADDR, 
+     ATHR_LAN_PORT_VLAN   /* Send to all ports */
+    },
+
+    {FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
+     TRUE,
+     ENET_UNIT_LAN,
+     0,
+     0x00, 
+     ATHR_LAN_PORT_VLAN    /* Send to all ports */
+    },
+};
+
+#ifdef CFG_ATHRHDR_EN
+typedef struct {
+    uint8_t data[ATHRHDR_MAX_DATA];
+    uint8_t len;
+    uint32_t seq;
+} cmd_resp_t;
+
+typedef struct {
+ uint16_t reg_addr;
+ uint16_t cmd_len;
+ uint8_t *reg_data;
+}cmd_write_t;
+
+static cmd_write_t cmd_write,cmd_read;
+static cmd_resp_t cmd_resp;
+static struct eth_device *lan_mac;
+//static atomic_t seqcnt = ATOMIC_INIT(0);
+static int  seqcnt = 0;
+static int cmd = 1;
+//volatile uchar AthrHdrPkt[60];
+#endif
+
+#define ATHR_GLOBALREGBASE    0
+
+//#define ATHR_PHY_MAX (sizeof(athrPhyInfo) / sizeof(athrPhyInfo[0]))
+#define ATHR_PHY_MAX 5
+
+/* Range of valid PHY IDs is [MIN..MAX] */
+#define ATHR_ID_MIN 0
+#define ATHR_ID_MAX (ATHR_PHY_MAX-1)
+
+/* Convenience macros to access myPhyInfo */
+#define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort)
+#define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive)
+#define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit)
+#define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase)
+#define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr)
+#define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting)
+
+
+#define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \
+            (ATHR_IS_ENET_PORT(phyUnit) &&        \
+            ATHR_ETHUNIT(phyUnit) == (ethUnit))
+
+#define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN))
+            
+/* Forward references */
+BOOL       athrs26_phy_is_link_alive(int phyUnit);
+static uint32_t athrs26_reg_read(uint16_t reg_addr);
+static void athrs26_reg_write(uint16_t reg_addr, 
+                              uint32_t reg_val);
+
+/******************************************************************************
+*
+* athrs26_phy_is_link_alive - test to see if the specified link is alive
+*
+* RETURNS:
+*    TRUE  --> link is alive
+*    FALSE --> link is down
+*/
+
+void athrs26_reg_init()
+{
+
+    athrs26_reg_write(0x200, 0x200);
+    athrs26_reg_write(0x300, 0x200);
+    athrs26_reg_write(0x400, 0x200);
+    athrs26_reg_write(0x500, 0x200);
+    athrs26_reg_write(0x600, 0x7d);
+
+#ifdef S26_VER_1_0
+    phy_reg_write(0, 0, 29, 41);
+    phy_reg_write(0, 0, 30, 0);
+    phy_reg_write(0, 1, 29, 41);
+    phy_reg_write(0, 1, 30, 0);
+    phy_reg_write(0, 2, 29, 41);
+    phy_reg_write(0, 2, 30, 0);
+    phy_reg_write(0, 3, 29, 41);
+    phy_reg_write(0, 3, 30, 0);
+    phy_reg_write(0, 4, 29, 41);
+    phy_reg_write(0, 4, 30, 0);
+#endif
+
+    athrs26_reg_write(0x38, 0xc000050e);
+
+#ifdef CFG_ATHRHDR_EN
+    athrs26_reg_write(0x104, 0x4804);
+#else
+    athrs26_reg_write(0x104, 0x4004);
+#endif
+
+    athrs26_reg_write(0x60, 0xffffffff);
+    athrs26_reg_write(0x64, 0xaaaaaaaa);
+    athrs26_reg_write(0x68, 0x55555555);
+    athrs26_reg_write(0x6c, 0x0);
+
+    athrs26_reg_write(0x70, 0x41af);
+}
+
+BOOL
+athrs26_phy_is_link_alive(int phyUnit)
+{
+    uint16_t phyHwStatus;
+    uint32_t phyBase;
+    uint32_t phyAddr;
+
+    phyBase = ATHR_PHYBASE(phyUnit);
+    phyAddr = ATHR_PHYADDR(phyUnit);
+
+    phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+
+    if (phyHwStatus & ATHR_STATUS_LINK_PASS)
+        return TRUE;
+
+    return FALSE;
+}
+
+
+/******************************************************************************
+*
+* athrs26_phy_setup - reset and setup the PHY associated with
+* the specified MAC unit number.
+*
+* Resets the associated PHY port.
+*
+* RETURNS:
+*    TRUE  --> associated PHY is alive
+*    FALSE --> no LINKs on this ethernet unit
+*/
+
+BOOL
+athrs26_phy_setup(int ethUnit)
+{
+    int         phyUnit;
+    uint16_t    phyHwStatus;
+    uint16_t    timeout;
+    int         liveLinks = 0;
+    uint32_t    phyBase = 0;
+    BOOL        foundPhy = FALSE;
+    uint32_t  phyAddr = 0;
+    uint32_t  regVal;
+    
+
+    /* See if there's any configuration data for this enet */
+    /* start auto negogiation on each phy */
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+			continue;
+        }
+
+
+        foundPhy = TRUE;
+        phyBase = ATHR_PHYBASE(phyUnit);
+        phyAddr = ATHR_PHYADDR(phyUnit);
+
+        phy_reg_write(phyBase, phyAddr, ATHR_AUTONEG_ADVERT,
+                      ATHR_ADVERTISE_ALL);
+
+        /* Reset PHYs*/
+        phy_reg_write(phyBase, phyAddr, ATHR_PHY_CONTROL,
+                      ATHR_CTRL_AUTONEGOTIATION_ENABLE
+                      | ATHR_CTRL_SOFTWARE_RESET);
+
+	}
+
+    if (!foundPhy) {
+        return FALSE; /* No PHY's configured for this ethUnit */
+    }
+
+    /*
+     * After the phy is reset, it takes a little while before
+     * it can respond properly.
+     */
+    sysMsDelay(1000);
+    
+    /*
+     * Wait up to .75 seconds for ALL associated PHYs to finish
+     * autonegotiation.  The only way we get out of here sooner is
+     * if ALL PHYs are connected AND finish autonegotiation.
+     */
+    for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        timeout=20;
+        for (;;) {
+			phyHwStatus = 0;
+            phy_reg_read(phyBase, phyAddr, ATHR_PHY_CONTROL, &phyHwStatus);
+
+		if (ATHR_RESET_DONE(phyHwStatus)) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Neg Success\n", phyUnit));
+                break;
+            }
+            if (timeout == 0) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Negogiation timeout\n", phyUnit));
+                break;
+            }
+            if (--timeout == 0) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Negogiation timeout\n", phyUnit));
+                break;
+            }
+
+            sysMsDelay(150);
+        }
+    }
+
+	/*
+     * All PHYs have had adequate time to autonegotiate.
+     * Now initialize software status.
+     *
+     * It's possible that some ports may take a bit longer
+     * to autonegotiate; but we can't wait forever.  They'll
+     * get noticed by mv_phyCheckStatusChange during regular
+     * polling activities.
+     */
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+            liveLinks++;
+            ATHR_IS_PHY_ALIVE(phyUnit) = TRUE;
+        } else {
+            ATHR_IS_PHY_ALIVE(phyUnit) = FALSE;
+        }
+
+        phy_reg_read(ATHR_PHYBASE(phyUnit), ATHR_PHYADDR(phyUnit), 
+                    ATHR_PHY_SPEC_STATUS, &regVal);
+        DRV_PRINT(DRV_DEBUG_PHYSETUP,
+            ("eth%d: Phy Specific Status=%4.4x\n", ethUnit, regVal)); 
+    }
+#if 0
+    /* if using header for register configuration, we have to     */
+    /* configure s26 register after frame transmission is enabled */
+
+    athrs26_reg_write(0x200, 0x200);
+    athrs26_reg_write(0x300, 0x200);
+    athrs26_reg_write(0x400, 0x200);
+    athrs26_reg_write(0x500, 0x200);
+    athrs26_reg_write(0x600, 0x200);
+	athrs26_reg_write(0x38, 0x50e);
+#endif
+#ifndef CFG_ATHRHDR_EN       
+/* if using header for register configuration, we have to     */
+    /* configure s26 register after frame transmission is enabled */
+        athrs26_reg_init();
+#endif
+    
+    return (liveLinks > 0);
+}
+
+/******************************************************************************
+*
+* athrs26_phy_is_fdx - Determines whether the phy ports associated with the
+* specified device are FULL or HALF duplex.
+*
+* RETURNS:
+*    1  --> FULL
+*    0 --> HALF
+*/
+int
+athrs26_phy_is_fdx(int ethUnit)
+{
+    int         phyUnit;
+    uint32_t    phyBase;
+    uint32_t    phyAddr;
+    uint16_t    phyHwStatus;
+    int         ii = 200;
+    
+    if (ethUnit == ENET_UNIT_LAN)
+        return TRUE;
+    
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+
+            phyBase = ATHR_PHYBASE(phyUnit);
+            phyAddr = ATHR_PHYADDR(phyUnit);
+
+            do {
+                phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+        	    sysMsDelay(10);
+            } while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
+
+            if (phyHwStatus & ATHER_STATUS_FULL_DEPLEX)
+                return TRUE;
+        }
+    }
+
+    return FALSE;
+}
+
+
+/******************************************************************************
+*
+* athrs26_phy_speed - Determines the speed of phy ports associated with the
+* specified device.
+*
+* RETURNS:
+*               AG7100_PHY_SPEED_10T, AG7100_PHY_SPEED_100TX;
+*               AG7100_PHY_SPEED_1000T;
+*/
+
+BOOL
+athrs26_phy_speed(int ethUnit)
+{
+    int         phyUnit;
+    uint16_t    phyHwStatus;
+    uint32_t    phyBase;
+    uint32_t    phyAddr;
+    int         ii = 200;
+    
+    if (ethUnit == ENET_UNIT_LAN)
+        return _100BASET;
+
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+
+            phyBase = ATHR_PHYBASE(phyUnit);
+            phyAddr = ATHR_PHYADDR(phyUnit);
+            
+            do {
+                phy_reg_read(phyBase, phyAddr, 
+                                           ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+                sysMsDelay(10);
+            }while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
+
+            phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >>
+                           ATHER_STATUS_LINK_SHIFT);
+
+            switch(phyHwStatus) {
+            case 0:
+                return _10BASET;
+            case 1:
+                return _100BASET;
+            case 2:
+                return _1000BASET;
+            default:
+                DRV_PRINT(DRV_DEBUG_PHYERROR, ("Unkown speed read!\n"));
+            }
+        }
+    }
+
+    return _10BASET;
+}
+
+/*****************************************************************************
+*
+* athr_phy_is_up -- checks for significant changes in PHY state.
+*
+* A "significant change" is:
+*     dropped link (e.g. ethernet cable unplugged) OR
+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
+*
+* When a PHY is plugged in, phyLinkGained is called.
+* When a PHY is unplugged, phyLinkLost is called.
+*/
+
+int
+athrs26_phy_is_up(int ethUnit)
+{
+    int             phyUnit;
+    uint16_t        phyHwStatus;
+    athrPhyInfo_t  *lastStatus;
+    int             linkCount   = 0;
+    int             lostLinks   = 0;
+    int             gainedLinks = 0;
+    uint32_t        phyBase;
+    uint32_t        phyAddr;
+#ifdef CFG_ATHRHDR_REG
+    /* if using header to config s26, the link of MAC0 should always be up */
+    if (ethUnit == ENET_UNIT_LAN)
+        return 1;
+#endif
+
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        phyBase = ATHR_PHYBASE(phyUnit);
+        phyAddr = ATHR_PHYADDR(phyUnit);
+
+
+        lastStatus = &athrPhyInfo[phyUnit];
+        phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+
+        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
+            /* See if we've lost link */
+            if (phyHwStatus & ATHR_STATUS_LINK_PASS) {
+                linkCount++;
+            } else {
+                lostLinks++;
+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n",
+                                               ethUnit, phyUnit));
+                lastStatus->isPhyAlive = FALSE;
+            }
+        } else { /* last known link status was DEAD */
+            /* Check for reset complete */
+            phy_reg_read(phyBase, phyAddr, ATHR_PHY_STATUS, &phyHwStatus);
+            if (!ATHR_RESET_DONE(phyHwStatus))
+                continue;
+
+            /* Check for AutoNegotiation complete */            
+            if (ATHR_AUTONEG_DONE(phyHwStatus)) {
+                //printk("autoneg done\n");
+                gainedLinks++;
+                linkCount++;
+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n",
+                                               ethUnit, phyUnit));
+                lastStatus->isPhyAlive = TRUE;
+            }
+        }
+    }
+
+    return (linkCount);
+
+#if 0
+    if (linkCount == 0) {
+        if (lostLinks) {
+            /* We just lost the last link for this MAC */
+            phyLinkLost(ethUnit);
+        }
+    } else {
+        if (gainedLinks == linkCount) {
+            /* We just gained our first link(s) for this MAC */
+            phyLinkGained(ethUnit);
+        }
+    }
+#endif
+}
+
+#ifdef CFG_ATHRHDR_EN
+void athr_hdr_timeout(void){
+	eth_halt();
+        NetState = NETLOOP_FAIL; 
+}
+
+void athr_hdr_handler(uchar *recv_pkt, unsigned dest, unsigned src, unsigned len){
+	header_receive_pkt(recv_pkt);
+	NetState = NETLOOP_SUCCESS;
+}
+static int
+athrs26_header_config_reg (struct eth_device *dev, uint8_t wr_flag,
+                           uint16_t reg_addr, uint16_t cmd_len,
+                           uint8_t *val)
+{
+    at_header_t at_header;
+    reg_cmd_t reg_cmd;
+    uchar *AthrHdrPkt;
+
+    AthrHdrPkt = NetTxPacket;
+
+    if(AthrHdrPkt == NULL) {
+		printf("Null packet\n");
+		return;
+    }
+    memset(AthrHdrPkt,0,60);
+
+    /*fill at_header*/
+    at_header.reserved0 = 0x10;  //default
+    at_header.priority = 0;
+    at_header.type = 0x5;
+    at_header.broadcast = 0;
+    at_header.from_cpu = 1;
+    at_header.reserved1 = 0x01; //default
+    at_header.port_num = 0;
+
+    AthrHdrPkt[0] = at_header.port_num;
+    AthrHdrPkt[0] |= at_header.reserved1 << 4;
+    AthrHdrPkt[0] |= at_header.from_cpu << 6;
+    AthrHdrPkt[0] |= at_header.broadcast << 7;
+
+    AthrHdrPkt[1] = at_header.type;
+    AthrHdrPkt[1] |= at_header.priority << 4;
+    AthrHdrPkt[1] |= at_header.reserved0 << 6;
+
+
+    /*fill reg cmd*/
+    if(cmd_len > 4)
+        cmd_len = 4;//only support 32bits register r/w
+
+    reg_cmd.reg_addr = reg_addr&0x3FFFC;
+    reg_cmd.cmd_len = cmd_len;
+    reg_cmd.cmd = wr_flag;
+    reg_cmd.reserved2 = 0x5; //default
+    reg_cmd.seq_num = seqcnt;
+
+    AthrHdrPkt[2] = reg_cmd.reg_addr & 0xff;
+    AthrHdrPkt[3] = (reg_cmd.reg_addr & 0xff00) >> 8;
+    AthrHdrPkt[4] = (reg_cmd.reg_addr & 0x30000) >> 16;
+    AthrHdrPkt[4] |= reg_cmd.cmd_len << 4;
+    AthrHdrPkt[5] = reg_cmd.cmd << 4;
+    AthrHdrPkt[5] |= reg_cmd.reserved2 << 5;
+    AthrHdrPkt[6] = (reg_cmd.seq_num & 0x7f) << 1;
+    AthrHdrPkt[7] = (reg_cmd.seq_num & 0x7f80) >> 7;
+    AthrHdrPkt[8] = (reg_cmd.seq_num & 0x7f8000) >> 15;
+    AthrHdrPkt[9] = (reg_cmd.seq_num & 0x7f800000) >> 23;
+
+    /*fill reg data*/
+    if(!wr_flag)//write
+        memcpy((AthrHdrPkt + 10), val, cmd_len);
+    
+    /*start xmit*/
+    if(dev == NULL) {
+	printf("ERROR device not found\n");
+	return -1;
+    }
+    header_xmit(dev, AthrHdrPkt ,60);
+    return 0;
+}
+void athr_hdr_func(void) {
+
+   NetSetTimeout (1 * CFG_HZ,athr_hdr_timeout );
+   NetSetHandler (athr_hdr_handler);
+
+   if(cmd) 
+   	athrs26_header_config_reg(lan_mac, cmd, cmd_read.reg_addr, cmd_read.cmd_len, cmd_read.reg_data);
+   else 
+        athrs26_header_config_reg(lan_mac, cmd, cmd_write.reg_addr, cmd_write.cmd_len, cmd_write.reg_data);
+}
+static int
+athrs26_header_write_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
+{
+    int i = 2;
+    cmd_write.reg_addr = reg_addr;
+    cmd_write.cmd_len = cmd_len;
+    cmd_write.reg_data = reg_data;
+    cmd = 0;
+    seqcnt++;
+
+    do {
+	if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
+	   break;
+    } while (i--);
+
+    return i;
+}
+
+static int
+athrs26_header_read_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
+{
+    int i = 2;
+
+    cmd_read.reg_addr = reg_addr;
+    cmd_read.cmd_len = cmd_len;
+    cmd_read.reg_data = reg_data;
+    cmd = 1;
+    seqcnt++;
+
+    do {
+        if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
+           break;
+    } while (i--);
+
+    if ((i==0) || (seqcnt != cmd_resp.seq) || (cmd_len != cmd_resp.len)) {
+        return -1;
+    }
+    memcpy (cmd_read.reg_data, cmd_resp.data, cmd_len);
+    return 0;
+}
+int header_receive_pkt(uchar *recv_pkt)
+{
+    cmd_resp.len = recv_pkt[4] >> 4;
+    if (cmd_resp.len > 10)
+        goto out;
+
+    cmd_resp.seq = recv_pkt[6] >> 1;
+    cmd_resp.seq |= recv_pkt[7] << 7;
+    cmd_resp.seq |= recv_pkt[8] << 15;
+    cmd_resp.seq |= recv_pkt[9] << 23;
+
+    if (cmd_resp.seq < seqcnt)
+        goto out;
+    memcpy (cmd_resp.data, (recv_pkt + 10), cmd_resp.len);
+out:
+     return 0;
+}
+
+void athrs26_reg_dev(struct eth_device *mac)
+{
+    lan_mac = mac;
+}
+
+#endif
+
+static uint32_t
+athrs26_reg_read(uint16_t reg_addr)
+{
+#ifndef CFG_ATHRHDR_REG
+    uint16_t reg_word_addr = reg_addr / 2, phy_val;
+    uint32_t phy_addr;
+    uint8_t phy_reg; 
+    
+    /* configure register high address */
+    phy_addr = 0x18;
+    phy_reg = 0x0;
+    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
+    phy_reg_write (0, phy_addr, phy_reg, phy_val);
+
+    /* read register with low address */
+    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address*/
+    phy_reg_read(0, phy_addr, phy_reg, &phy_val);
+    
+    return phy_val;
+#else
+    uint8_t reg_data[4];
+
+    memset (reg_data, 0, 4);
+    athrs26_header_read_reg(reg_addr, 4, reg_data);
+    return (reg_data[0] | (reg_data[1] << 8) | (reg_data[2] << 16) | (reg_data[3] << 24));
+#endif
+}
+
+static void
+athrs26_reg_write(uint16_t reg_addr, uint32_t reg_val)
+{
+#ifndef CFG_ATHRHDR_REG
+    uint16_t reg_word_addr = reg_addr / 2, phy_val;
+    uint32_t phy_addr;
+    uint8_t phy_reg; 
+
+    /* configure register high address */
+    phy_addr = 0x18;
+    phy_reg = 0x0;
+    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
+    phy_reg_write (0, phy_addr, phy_reg, phy_val);
+
+    /* read register with low address */
+    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address */
+    phy_reg_write (0, phy_addr, phy_reg, reg_val);
+#else
+    uint8_t reg_data[4];
+
+    memset (reg_data, 0, 4);
+    reg_data[0] = (uint8_t)(0x00ff & reg_val);
+    reg_data[1] = (uint8_t)((0xff00 & reg_val) >> 8);
+    reg_data[2] = (uint8_t)((0xff0000 & reg_val) >> 16);
+    reg_data[3] = (uint8_t)((0xff000000 & reg_val) >> 24);
+
+    athrs26_header_write_reg (reg_addr, 4, reg_data);
+#endif
+
+}
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h
new file mode 100644
index 000000000..0fdde376e
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h
@@ -0,0 +1,134 @@
+#ifndef _ATHRS26_PHY_H
+#define _ATHRS26_PHY_H
+
+/*****************/
+/* PHY Registers */
+/*****************/
+#define ATHR_PHY_CONTROL                 0
+#define ATHR_PHY_STATUS                  1
+#define ATHR_PHY_ID1                     2
+#define ATHR_PHY_ID2                     3
+#define ATHR_AUTONEG_ADVERT              4
+#define ATHR_LINK_PARTNER_ABILITY        5
+#define ATHR_AUTONEG_EXPANSION           6
+#define ATHR_NEXT_PAGE_TRANSMIT          7
+#define ATHR_LINK_PARTNER_NEXT_PAGE      8
+#define ATHR_1000BASET_CONTROL           9
+#define ATHR_1000BASET_STATUS            10
+#define ATHR_PHY_SPEC_CONTROL            16
+#define ATHR_PHY_SPEC_STATUS             17
+#define ATHR_DEBUG_PORT_ADDRESS          29
+#define ATHR_DEBUG_PORT_DATA             30
+
+/* ATHR_PHY_CONTROL fields */
+#define ATHR_CTRL_SOFTWARE_RESET                    0x8000
+#define ATHR_CTRL_SPEED_LSB                         0x2000
+#define ATHR_CTRL_AUTONEGOTIATION_ENABLE            0x1000
+#define ATHR_CTRL_RESTART_AUTONEGOTIATION           0x0200
+#define ATHR_CTRL_SPEED_FULL_DUPLEX                 0x0100
+#define ATHR_CTRL_SPEED_MSB                         0x0040
+
+#define ATHR_RESET_DONE(phy_control)                   \
+    (((phy_control) & (ATHR_CTRL_SOFTWARE_RESET)) == 0)
+    
+/* Phy status fields */
+#define ATHR_STATUS_AUTO_NEG_DONE                   0x0020
+
+#define ATHR_AUTONEG_DONE(ip_phy_status)                   \
+    (((ip_phy_status) &                                  \
+        (ATHR_STATUS_AUTO_NEG_DONE)) ==                    \
+        (ATHR_STATUS_AUTO_NEG_DONE))
+        
+/* Link Partner ability */
+#define ATHR_LINK_100BASETX_FULL_DUPLEX       0x0100
+#define ATHR_LINK_100BASETX                   0x0080
+#define ATHR_LINK_10BASETX_FULL_DUPLEX        0x0040
+#define ATHR_LINK_10BASETX                    0x0020
+
+/* Advertisement register. */
+#define ATHR_ADVERTISE_NEXT_PAGE              0x8000
+#define ATHR_ADVERTISE_ASYM_PAUSE             0x0800
+#define ATHR_ADVERTISE_PAUSE                  0x0400
+#define ATHR_ADVERTISE_100FULL                0x0100
+#define ATHR_ADVERTISE_100HALF                0x0080  
+#define ATHR_ADVERTISE_10FULL                 0x0040  
+#define ATHR_ADVERTISE_10HALF                 0x0020  
+
+#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \
+                            ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL)
+                       
+/* 1000BASET_CONTROL */
+#define ATHR_ADVERTISE_1000FULL               0x0200
+
+/* Phy Specific status fields */
+#define ATHER_STATUS_LINK_MASK                0xC000
+#define ATHER_STATUS_LINK_SHIFT               14
+#define ATHER_STATUS_FULL_DEPLEX              0x2000
+#define ATHR_STATUS_LINK_PASS                 0x0400
+#define ATHR_STATUS_RESOVLED                  0x0800
+
+/*phy debug port  register */
+#define ATHER_DEBUG_SERDES_REG                5
+
+/* Serdes debug fields */
+#define ATHER_SERDES_BEACON                   0x0100
+
+#ifndef BOOL
+#define BOOL    int
+#define TRUE    1
+#define FALSE   0
+#endif
+
+#define sysMsDelay(_x) udelay((_x) * 1000)
+
+#undef S26_VER_1_0
+
+#ifdef CFG_ATHRHDR_EN
+
+#include <net.h>
+#define header_xmit(dev,pkt,len) dev->send(dev,pkt,len) //dev_queue_xmit(skb)
+#define header_recv_ack(dev) dev->recv(dev) //dev_queue_xmit(skb)
+
+typedef enum {
+    NORMAL_PACKET,
+    RESERVED0,
+    MIB_1ST,
+    RESERVED1,
+    RESERVED2,
+    READ_WRITE_REG,
+    READ_WRITE_REG_ACK,
+    RESERVED3
+} ATHR_HDR_TYPE;
+
+typedef struct {
+    uint16_t    reserved0;
+    uint16_t    priority;
+    uint16_t    type ;
+    uint16_t    broadcast;
+    uint16_t    from_cpu;
+    uint16_t    reserved1;
+    uint16_t    port_num;
+}at_header_t;
+
+typedef struct {
+    uint64_t    reg_addr;
+    uint64_t    reserved0;
+    uint64_t    cmd_len;
+    uint64_t    reserved1;
+    uint64_t    cmd;
+    uint64_t    reserved2;
+    uint64_t    seq_num;
+}reg_cmd_t;
+void athrs26_reg_init(void);
+int header_receive_pkt(uchar *pkt);
+void athrs26_reg_dev(struct eth_device *mac);
+
+#endif
+
+int athrs26_phy_is_up(int unit);
+int athrs26_phy_is_fdx(int unit);
+int athrs26_phy_speed(int unit);
+BOOL athrs26_phy_setup(int unit);
+
+#endif /* _ATHRS26_PHY_H */
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk
new file mode 100644
index 000000000..c0e5d8244
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Danube board with MIPS 24Kc CPU core
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifdef CONFIG_LZMA_BOOTSTRAP
+
+ifdef BUILD_BOOTSTRAP
+
+$(info BUILD_BOOTSTRAP )
+#TEXT_BASE = 0xB0000000
+TEXT_BASE = 0x80010000
+
+else # BUILD_BOOTSTRAP
+
+ifndef TEXT_BASE
+$(info redefine TEXT_BASE = 0x80040000 )
+TEXT_BASE = 0x80040000
+endif
+
+endif # BUILD_BOOTSTRAP
+
+else
+
+ifdef BUILD_BOOTSTRAP
+$(error BUILD_BOOTSTRAP but not enabled in config)
+endif
+
+ifndef TEXT_BASE
+## Standard: boot from ebu
+$(info redefine TEXT_BASE = 0xB0000000 )
+TEXT_BASE = 0xB0000000
+## For testing: boot from RAM
+# TEXT_BASE = 0x80100000
+endif
+
+endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h
new file mode 100644
index 000000000..4df6f1170
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
+
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0x130  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x301
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA03  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1b00
+#define MC_DC22_VALUE	0x1b1b
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x59   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x4e20
+#define MC_DC30_VALUE	0x8235
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h
new file mode 100644
index 000000000..445b7dac1
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h
@@ -0,0 +1,51 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
+
+#define MC_DC0_VALUE	0x1B1B
+#define MC_DC1_VALUE	0x0
+#define MC_DC2_VALUE	0x0
+#define MC_DC3_VALUE	0x0
+#define MC_DC4_VALUE	0x0
+#define MC_DC5_VALUE	0x200
+#define MC_DC6_VALUE	0x605
+#define MC_DC7_VALUE	0x303
+#define MC_DC8_VALUE	0x102
+#define MC_DC9_VALUE	0x70a
+#define MC_DC10_VALUE	0x203
+#define MC_DC11_VALUE	0xc02
+#define MC_DC12_VALUE	0x1C8
+#define MC_DC13_VALUE	0x1
+#define MC_DC14_VALUE	0x0
+#define MC_DC15_VALUE	0x120  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE	0xC800
+#define MC_DC17_VALUE	0xd
+#define MC_DC18_VALUE	0x301
+#define MC_DC19_VALUE	0x200
+#define MC_DC20_VALUE	0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE	0x1700
+#define MC_DC22_VALUE	0x1717
+#define MC_DC23_VALUE	0x0
+#define MC_DC24_VALUE	0x52   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE	0x0
+#define MC_DC26_VALUE	0x0
+#define MC_DC27_VALUE	0x0
+#define MC_DC28_VALUE	0x510
+#define MC_DC29_VALUE	0x4e20
+#define MC_DC30_VALUE	0x8235
+#define MC_DC31_VALUE	0x0
+#define MC_DC32_VALUE	0x0
+#define MC_DC33_VALUE	0x0
+#define MC_DC34_VALUE	0x0
+#define MC_DC35_VALUE	0x0
+#define MC_DC36_VALUE	0x0
+#define MC_DC37_VALUE	0x0
+#define MC_DC38_VALUE	0x0
+#define MC_DC39_VALUE	0x0
+#define MC_DC40_VALUE	0x0
+#define MC_DC41_VALUE	0x0
+#define MC_DC42_VALUE	0x0
+#define MC_DC43_VALUE	0x0
+#define MC_DC44_VALUE	0x0
+#define MC_DC45_VALUE	0x500
+//#define MC_DC45_VALUE	0x400
+#define MC_DC46_VALUE	0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S
new file mode 100644
index 000000000..2f2c2255e
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S
@@ -0,0 +1,622 @@
+/*
+ *  Memory sub-system initialization code for Danube board.
+ *  Andre Messerschmidt
+ *  Copyright (c) 2005	Infineon Technologies AG
+ *
+ *  Based on Inca-IP code
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* History:
+      peng liu May 25, 2006, for PLL setting after reset, 05252006
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#if 0
+
+#if defined(CONFIG_USE_DDR_RAM)
+
+#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
+#include "ddr_settings_r111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
+#include "ddr_settings_r166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
+#include "ddr_settings_e111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
+#include "ddr_settings_e166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
+#include "ddr_settings_PROMOSDDR400.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
+#include "ddr_settings_Samsung_166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
+#include "ddr_settings_psc_166.h"
+#define DDR166
+#else
+#warning "missing definition for ddr_settings.h, use default!"
+#include "ddr_settings.h"
+#endif
+#endif /* CONFIG_USE_DDR_RAM */
+
+#else
+
+#include "ddr_settings_psc_166.h"
+#define DDR166
+
+#endif
+
+#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
+#error "missing include of ddr_settings.h"
+#endif
+
+#define EBU_MODUL_BASE		0xBE105300
+#define EBU_CLC(value)		0x0000(value)
+#define EBU_CON(value)		0x0010(value)
+#define EBU_ADDSEL0(value)	0x0020(value)
+#define EBU_ADDSEL1(value)	0x0024(value)
+#define EBU_ADDSEL2(value)	0x0028(value)
+#define EBU_ADDSEL3(value)	0x002C(value)
+#define EBU_BUSCON0(value)	0x0060(value)
+#define EBU_BUSCON1(value)	0x0064(value)
+#define EBU_BUSCON2(value)	0x0068(value)
+#define EBU_BUSCON3(value)	0x006C(value)
+
+#define MC_MODUL_BASE		0xBF800000
+#define MC_ERRCAUSE(value)	0x0010(value)
+#define MC_ERRADDR(value)	0x0020(value)
+#define MC_CON(value)		0x0060(value)
+
+#define MC_SRAM_ENABLE		0x00000004
+#define MC_SDRAM_ENABLE		0x00000002
+#define MC_DDRRAM_ENABLE	0x00000001
+
+#define MC_SDR_MODUL_BASE	0xBF800200
+#define MC_IOGP(value)		0x0000(value)
+#define MC_CTRLENA(value)	0x0010(value)
+#define MC_MRSCODE(value)	0x0020(value)
+#define MC_CFGDW(value)		0x0030(value)
+#define MC_CFGPB0(value)	0x0040(value)
+#define MC_LATENCY(value)	0x0080(value)
+#define MC_TREFRESH(value)	0x0090(value)
+#define MC_SELFRFSH(value)	0x00A0(value)
+
+#define MC_DDR_MODUL_BASE	0xBF801000
+#define MC_DC00(value)		0x0000(value)
+#define MC_DC01(value)		0x0010(value)
+#define MC_DC02(value)		0x0020(value)
+#define MC_DC03(value)		0x0030(value)
+#define MC_DC04(value)		0x0040(value)
+#define MC_DC05(value)		0x0050(value)
+#define MC_DC06(value)		0x0060(value)
+#define MC_DC07(value)		0x0070(value)
+#define MC_DC08(value)		0x0080(value)
+#define MC_DC09(value)		0x0090(value)
+#define MC_DC10(value)		0x00A0(value)
+#define MC_DC11(value)		0x00B0(value)
+#define MC_DC12(value)		0x00C0(value)
+#define MC_DC13(value)		0x00D0(value)
+#define MC_DC14(value)		0x00E0(value)
+#define MC_DC15(value)		0x00F0(value)
+#define MC_DC16(value)		0x0100(value)
+#define MC_DC17(value)		0x0110(value)
+#define MC_DC18(value)		0x0120(value)
+#define MC_DC19(value)		0x0130(value)
+#define MC_DC20(value)		0x0140(value)
+#define MC_DC21(value)		0x0150(value)
+#define MC_DC22(value)		0x0160(value)
+#define MC_DC23(value)		0x0170(value)
+#define MC_DC24(value)		0x0180(value)
+#define MC_DC25(value)		0x0190(value)
+#define MC_DC26(value)		0x01A0(value)
+#define MC_DC27(value)		0x01B0(value)
+#define MC_DC28(value)		0x01C0(value)
+#define MC_DC29(value)		0x01D0(value)
+#define MC_DC30(value)		0x01E0(value)
+#define MC_DC31(value)		0x01F0(value)
+#define MC_DC32(value)		0x0200(value)
+#define MC_DC33(value)		0x0210(value)
+#define MC_DC34(value)		0x0220(value)
+#define MC_DC35(value)		0x0230(value)
+#define MC_DC36(value)		0x0240(value)
+#define MC_DC37(value)		0x0250(value)
+#define MC_DC38(value)		0x0260(value)
+#define MC_DC39(value)		0x0270(value)
+#define MC_DC40(value)		0x0280(value)
+#define MC_DC41(value)		0x0290(value)
+#define MC_DC42(value)		0x02A0(value)
+#define MC_DC43(value)		0x02B0(value)
+#define MC_DC44(value)		0x02C0(value)
+#define MC_DC45(value)		0x02D0(value)
+#define MC_DC46(value)		0x02E0(value)
+
+#define RCU_OFFSET  0xBF203000
+#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
+#define RCU_STS          (RCU_OFFSET + 0x0014)
+
+#define CGU_OFFSET  0xBF103000
+#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
+#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
+#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
+#define  CGU_SYS      (CGU_OFFSET + 0x0010)
+#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
+#define  IF_CLK       (CGU_OFFSET + 0x0018)
+#define  CGU_SMD      (CGU_OFFSET + 0x0020)
+#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
+#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
+#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
+#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
+#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
+#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
+#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
+
+//05252006
+#define  pll0_35MHz_CONFIG 0x9D861059
+#define  pll1_35MHz_CONFIG 0x1A260CD9
+#define  pll2_35MHz_CONFIG 0x8000f1e5
+#define  pll0_36MHz_CONFIG 0x1000125D
+#define  pll1_36MHz_CONFIG 0x1B1E0C99
+#define  pll2_36MHz_CONFIG 0x8002f2a1
+//05252006
+
+//06063001-joelin disable the PCI CFRAME mask -start
+/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
+But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
+
+The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
+The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
+*/
+#define PCI_CR_PR_OFFSET  0xBE105400
+#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CONFIG_SPACE  0xB7000000
+#define CS_CFM		(PCI_CONFIG_SPACE + 0x6C)
+//06063001-joelin disable the PCI CFRAME mask -end
+	.set	noreorder
+
+
+/*
+ * void ebu_init(void)
+ */
+	.globl	ebu_init
+	.ent	ebu_init
+ebu_init:
+
+#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
+	defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
+	defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
+	defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
+
+	li	t1, EBU_MODUL_BASE
+#if defined(CONFIG_EBU_ADDSEL0)
+	li	t2, CONFIG_EBU_ADDSEL0
+	sw	t2, EBU_ADDSEL0(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL1)
+	li	t2, CONFIG_EBU_ADDSEL1
+	sw	t2, EBU_ADDSEL1(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL2)
+	li	t2, CONFIG_EBU_ADDSEL2
+	sw	t2, EBU_ADDSEL2(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL3)
+	li	t2, CONFIG_EBU_ADDSEL3
+	sw	t2, EBU_ADDSEL3(t1)
+#endif
+
+#if defined(CONFIG_EBU_BUSCON0)
+	li	t2, CONFIG_EBU_BUSCON0
+	sw	t2, EBU_BUSCON0(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON1)
+	li	t2, CONFIG_EBU_BUSCON1
+	sw	t2, EBU_BUSCON1(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON2)
+	li	t2, CONFIG_EBU_BUSCON2
+	sw	t2, EBU_BUSCON2(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON3)
+	li	t2, CONFIG_EBU_BUSCON3
+	sw	t2, EBU_BUSCON3(t1)
+#endif
+
+#endif
+
+	j	ra
+	nop
+
+	.end	ebu_init
+
+
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	cgu_init
+	.ent	cgu_init
+cgu_init:
+	li  t2, CGU_SYS
+	lw  t2,0(t2)
+	beq t2,a0,freq_up2date
+	nop
+
+	li  t2, RCU_STS
+	lw  t2, 0(t2)
+	and t2,0x00020000
+	beq t2,0x00020000,boot_36MHZ
+	nop
+//05252006
+	li  t1, PLL0_CFG
+	li  t2, pll0_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_35MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+	b   wait_reset
+	nop
+boot_36MHZ:
+	li  t1, PLL0_CFG
+	li  t2, pll0_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL1_CFG
+	li  t2, pll1_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, PLL2_CFG
+	li  t2, pll2_36MHz_CONFIG
+	sw	t2,0(t1)
+	li  t1, CGU_SYS
+	sw	a0,0(t1)
+	li  t1, RCU_RST_REQ
+	li  t2, 0x40000008
+	sw	t2,0(t1)
+//05252006
+
+wait_reset:
+	b   wait_reset
+	nop
+freq_up2date:
+	j ra
+	nop
+
+	.end	cgu_init
+
+#ifndef CONFIG_USE_DDR_RAM
+/*
+ * void sdram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	sdram_init
+	.ent	sdram_init
+sdram_init:
+
+	/* SDRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable SDRAM module in memory controller */
+	li	t3, MC_SDRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_SDR_MODUL_BASE
+
+	/* disable the controller */
+	li	t2, 0
+	sw	t2, MC_CTRLENA(t1)
+
+	li	t2, 0x822
+	sw	t2, MC_IOGP(t1)
+
+	li	t2, 0x2
+	sw	t2, MC_CFGDW(t1)
+
+	/* Set CAS Latency */
+	li	t2, 0x00000020
+	sw	t2, MC_MRSCODE(t1)
+
+	/* Set CS0 to SDRAM parameters */
+	li	t2, 0x000014d8
+	sw	t2, MC_CFGPB0(t1)
+
+	/* Set SDRAM latency parameters */
+	li  	t2, 0x00036325;   /* BC PC100 */
+	sw	t2, MC_LATENCY(t1)
+
+	/* Set SDRAM refresh rate */
+	li	t2, 0x00000C30
+	sw	t2, MC_TREFRESH(t1)
+
+	/* Clear Power-down registers */
+	sw	zero, MC_SELFRFSH(t1)
+
+	/* Finally enable the controller */
+	li	t2, 1
+	sw	t2, MC_CTRLENA(t1)
+
+	j	ra
+	nop
+
+	.end	sdram_init
+
+#endif /* !CONFIG_USE_DDR_RAM */
+
+#ifdef CONFIG_USE_DDR_RAM
+/*
+ * void ddrram_init(long)
+ *
+ * a0 has the clock value
+ */
+	.globl	ddrram_init
+	.ent	ddrram_init
+ddrram_init:
+
+	/* DDR-DRAM Initialization
+	 */
+	li	t1, MC_MODUL_BASE
+
+	/* Clear Error log registers */
+	sw	zero, MC_ERRCAUSE(t1)
+	sw	zero, MC_ERRADDR(t1)
+
+	/* Enable DDR module in memory controller */
+	li	t3, MC_DDRRAM_ENABLE
+	lw	t2, MC_CON(t1)
+	or	t3, t2, t3
+	sw	t3, MC_CON(t1)
+
+	li	t1, MC_DDR_MODUL_BASE
+
+	/* Write configuration to DDR controller registers */
+	li	t2, MC_DC0_VALUE
+	sw	t2, MC_DC00(t1)
+
+	li	t2, MC_DC1_VALUE
+	sw	t2, MC_DC01(t1)
+
+	li	t2, MC_DC2_VALUE
+	sw	t2, MC_DC02(t1)
+
+	li	t2, MC_DC3_VALUE
+	sw	t2, MC_DC03(t1)
+
+	li	t2, MC_DC4_VALUE
+	sw	t2, MC_DC04(t1)
+
+	li	t2, MC_DC5_VALUE
+	sw	t2, MC_DC05(t1)
+
+	li	t2, MC_DC6_VALUE
+	sw	t2, MC_DC06(t1)
+
+	li	t2, MC_DC7_VALUE
+	sw	t2, MC_DC07(t1)
+
+	li	t2, MC_DC8_VALUE
+	sw	t2, MC_DC08(t1)
+
+	li	t2, MC_DC9_VALUE
+	sw	t2, MC_DC09(t1)
+
+	li	t2, MC_DC10_VALUE
+	sw	t2, MC_DC10(t1)
+
+	li	t2, MC_DC11_VALUE
+	sw	t2, MC_DC11(t1)
+
+	li	t2, MC_DC12_VALUE
+	sw	t2, MC_DC12(t1)
+
+	li	t2, MC_DC13_VALUE
+	sw	t2, MC_DC13(t1)
+
+	li	t2, MC_DC14_VALUE
+	sw	t2, MC_DC14(t1)
+
+	li	t2, MC_DC15_VALUE
+	sw	t2, MC_DC15(t1)
+
+	li	t2, MC_DC16_VALUE
+	sw	t2, MC_DC16(t1)
+
+	li	t2, MC_DC17_VALUE
+	sw	t2, MC_DC17(t1)
+
+	li	t2, MC_DC18_VALUE
+	sw	t2, MC_DC18(t1)
+
+	li	t2, MC_DC19_VALUE
+	sw	t2, MC_DC19(t1)
+
+	li	t2, MC_DC20_VALUE
+	sw	t2, MC_DC20(t1)
+
+	li	t2, MC_DC21_VALUE
+	sw	t2, MC_DC21(t1)
+
+	li	t2, MC_DC22_VALUE
+	sw	t2, MC_DC22(t1)
+
+	li	t2, MC_DC23_VALUE
+	sw	t2, MC_DC23(t1)
+
+	li	t2, MC_DC24_VALUE
+	sw	t2, MC_DC24(t1)
+
+	li	t2, MC_DC25_VALUE
+	sw	t2, MC_DC25(t1)
+
+	li	t2, MC_DC26_VALUE
+	sw	t2, MC_DC26(t1)
+
+	li	t2, MC_DC27_VALUE
+	sw	t2, MC_DC27(t1)
+
+	li	t2, MC_DC28_VALUE
+	sw	t2, MC_DC28(t1)
+
+	li	t2, MC_DC29_VALUE
+	sw	t2, MC_DC29(t1)
+
+	li	t2, MC_DC30_VALUE
+	sw	t2, MC_DC30(t1)
+
+	li	t2, MC_DC31_VALUE
+	sw	t2, MC_DC31(t1)
+
+	li	t2, MC_DC32_VALUE
+	sw	t2, MC_DC32(t1)
+
+	li	t2, MC_DC33_VALUE
+	sw	t2, MC_DC33(t1)
+
+	li	t2, MC_DC34_VALUE
+	sw	t2, MC_DC34(t1)
+
+	li	t2, MC_DC35_VALUE
+	sw	t2, MC_DC35(t1)
+
+	li	t2, MC_DC36_VALUE
+	sw	t2, MC_DC36(t1)
+
+	li	t2, MC_DC37_VALUE
+	sw	t2, MC_DC37(t1)
+
+	li	t2, MC_DC38_VALUE
+	sw	t2, MC_DC38(t1)
+
+	li	t2, MC_DC39_VALUE
+	sw	t2, MC_DC39(t1)
+
+	li	t2, MC_DC40_VALUE
+	sw	t2, MC_DC40(t1)
+
+	li	t2, MC_DC41_VALUE
+	sw	t2, MC_DC41(t1)
+
+	li	t2, MC_DC42_VALUE
+	sw	t2, MC_DC42(t1)
+
+	li	t2, MC_DC43_VALUE
+	sw	t2, MC_DC43(t1)
+
+	li	t2, MC_DC44_VALUE
+	sw	t2, MC_DC44(t1)
+
+	li	t2, MC_DC45_VALUE
+	sw	t2, MC_DC45(t1)
+
+	li	t2, MC_DC46_VALUE
+	sw	t2, MC_DC46(t1)
+
+	li	t2, 0x00000100
+	sw	t2, MC_DC03(t1)
+
+	j	ra
+	nop
+
+	.end	ddrram_init
+#endif /* CONFIG_USE_DDR_RAM */
+
+	.globl	lowlevel_init
+	.ent	lowlevel_init
+lowlevel_init:
+	/* EBU, CGU and SDRAM/DDR-RAM Initialization.
+	 */
+	move	t0, ra
+	/* We rely on the fact that non of the following ..._init() functions
+	 * modify t0
+	 */
+#if defined(CONFIG_SYS_EBU_BOOT)
+#if defined(DDR166)
+	/* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
+	li  a0,0xe8
+#elif defined(DDR133)
+	/* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
+	li  a0,0xe9
+#else /* defined(DDR111) */
+	/* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
+	li  a0,0xea
+#endif
+	bal	cgu_init
+	nop
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	bal	ebu_init
+	nop
+
+//06063001-joelin disable the PCI CFRAME mask-start
+#ifdef DISABLE_CFRAME
+	li  t1, PCI_CR_PCI	//mw bf103034 80000000
+	li  t2, 0x80000000
+	sw	t2,0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x103
+	sw  t2,0(t1)
+
+	li  t1, CS_CFM			//mw b700006c 0
+	li  t2, 0x00
+	sw  t2, 0(t1)
+
+	li  t1, PCI_CR_PCI_MOD_REG	//mw be105430 103
+	li  t2, 0x1000103
+	sw  t2, 0(t1)
+#endif
+//06063001-joelin disable the PCI CFRAME mask-end
+
+#ifdef CONFIG_SYS_EBU_BOOT
+#ifndef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_USE_DDR_RAM
+	bal	ddrram_init
+	nop
+#else
+	bal	sdram_init
+	nop
+#endif
+#endif /* CONFIG_SYS_RAMBOOT */
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+	move	ra, t0
+	j	ra
+	nop
+
+	.end	lowlevel_init
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S
new file mode 100644
index 000000000..e0d7971d8
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S
@@ -0,0 +1,48 @@
+/*
+ *  Power Management unit initialization code for AMAZON development board.
+ *
+ *  Copyright (c) 2003	Ou Ke, Infineon.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#define PMU_PWDCR 		0xBF10201C
+#define PMU_SR			0xBF102020
+
+	.globl	pmuenable
+
+pmuenable:
+	li      t0, PMU_PWDCR
+	li      t1, 0x2		/* enable everything */
+	sw      t1, 0(t0)
+#if 0
+1:
+	li	t0, PMU_SR
+	lw      t2, 0(t0)
+	bne     t1, t2, 1b
+	nop
+#endif
+	j	ra
+	nop
+
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds
new file mode 100644
index 000000000..9a6cd1b8a
--- /dev/null
+++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
+	  __u_boot_cmd_start = .;
+	  *(.u_boot_cmd)
+	  __u_boot_cmd_end = .;
+	}
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss (NOLOAD)  : { *(.sbss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
+	uboot_end = .;
+}
diff --git a/package/uboot-lantiq/files/include/configs/arv4518.h b/package/uboot-lantiq/files/include/configs/arv4518.h
new file mode 100644
index 000000000..c4a9842c7
--- /dev/null
+++ b/package/uboot-lantiq/files/include/configs/arv4518.h
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the Danube reference board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* #define DEBUG */
+
+#define CONFIG_MIPS32		1	/* MIPS32 CPU compatible		*/
+#define CONFIG_MIPS24KEC	1	/* MIPS 24KEc CPU core			*/
+#define CONFIG_DANUBE		1	/* in a Danube/Twinpass Chip		*/
+#define CONFIG_ARV4518		1	/* on the arv4518 Board			*/
+
+#define CONFIG_SYS_MIPS_MULTI_CPU	1	/* This is a multi cpu system */
+
+#define CONFIG_USE_DDR_RAM
+#define CONFIG_SYS_MAX_RAM	64*1024*1024
+
+#define CONFIG_FLASH_CFI_DRIVER	1
+
+#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
+
+#ifdef CONFIG_SYS_RAMBOOT
+	//#warning CONFIG_SYS_RAMBOOT
+	#define CONFIG_SKIP_LOWLEVEL_INIT
+#else /* CONFIG_SYS_RAMBOOT */
+	#define CONFIG_SYS_EBU_BOOT
+	#define INFINEON_EBU_BOOTCFG	0x688C688C	/* CMULT = 8 for 150 MHz */
+#endif /* CONFIG_SYS_RAMBOOT */
+
+#if 1
+#ifndef	CPU_CLOCK_RATE
+#define CPU_CLOCK_RATE	(ifx_get_cpuclk())
+#endif
+#endif
+
+#define	CONFIG_SYS_PROMPT	"ARV4518 => "	/* Monitor Command Prompt */
+
+#undef CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/
+
+/*
+ * Include common defines/options for all Infineon boards
+ */
+#include "ifx-common.h"
+
+
+#undef CONFIG_EXTRA_ENV_SETTINGS                                       
+#define CONFIG_EXTRA_ENV_SETTINGS                                       \
+        "ram_addr=0x80500000\0"                                         \
+        "kernel_addr=0xb0050000\0"                                      \
+        "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
+        "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"         \
+        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+                "nfsroot=${serverip}:${rootpath} \0"                    \
+        "addip=setenv bootargs ${bootargs} "                            \
+                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+                ":${hostname}:${netdev}:off\0"                          \
+        "addmisc=setenv bootargs ${bootargs} init=/etc/preinit "        \
+                "console=ttyS1,115200 ethaddr=${ethaddr} "              \
+                "${mtdparts}\0"                                         \
+        "flash_flash=run flashargs addip addmisc;"                      \
+                "bootm ${kernel_addr}\0"                                \
+        "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"    \
+        "net_flash=run load_kernel flashargs addip addmisc;"            \
+                "bootm ${ram_addr}\0"                                   \
+        "net_nfs=run load_kernel nfsargs addip addmisc;"                \
+                "bootm ${ram_addr}\0"                                   \
+        "load_kernel=tftp ${ram_addr} "                                 \
+                "${tftppath}openwrt-ifxmips-uImage\0"                   \
+        "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
+                "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
+        "update_openwrt=tftp ${ram_addr} "                              \
+                "${tftppath}openwrt-ifxmips-squashfs.image;"            \
+                "era ${kernel_addr} +${filesize};"                      \
+                "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
+
+/*
+ * Cache Configuration (cpu/chip specific, Danube)
+ */
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_MIPS_CACHE_OPER_MODE	CONF_CM_CACHABLE_NO_WA
+
+#define CONFIG_NET_MULTI
+#if 0
+#define CONFIG_M4530_ETH
+#define CONFIG_M4530_FPGA
+#endif
+
+#define CONFIG_IFX_ETOP
+//#define CLK_OUT2_25MHZ
+#define CONFIG_EXTRA_SWITCH
+
+//#define CONFIG_RMII			/*  use interface in RMII mode */
+
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+
+#define CONFIG_IFX_ASC
+
+#ifdef CONFIG_USE_ASC0
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100400
+#else
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100C00
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+/* Configuration of EBU: */
+/* starting address from 0xb0000000 */
+/* make the flash available from RAM boot */
+#	define CONFIG_EBU_ADDSEL0		0x10000031
+#	define CONFIG_EBU_BUSCON0		0x0001D7FF
+#	define CONFIG_EBU_ADDSEL1		0x14000001
+#	define CONFIG_EBU_BUSCON1		0x4041D7FD
+#endif
+
+#define CONFIG_CMD_HTTPD		/* enable upgrade via HTTPD */
+
+//#define CONFIG_ETHADDR		00:13:f7:df:1c:80
+//#define CONFIG_ETHADDR		11:22:33:44:55:66
+#define CONFIG_IPADDR		192.168.2.1
+#define CONFIG_SERVERIP		192.168.2.101
+#define CONFIG_GATEWAYIP	192.168.2.254
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_ROOTPATH		"/export"
+
+#endif	/* __CONFIG_H */
diff --git a/package/uboot-lantiq/files/include/configs/arv752DWP22.h b/package/uboot-lantiq/files/include/configs/arv752DWP22.h
new file mode 100644
index 000000000..386a2380c
--- /dev/null
+++ b/package/uboot-lantiq/files/include/configs/arv752DWP22.h
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the Danube reference board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* #define DEBUG */
+
+#define CONFIG_MIPS32		1	/* MIPS32 CPU compatible		*/
+#define CONFIG_MIPS24KEC	1	/* MIPS 24KEc CPU core			*/
+#define CONFIG_DANUBE		1	/* in a Danube/Twinpass Chip		*/
+#define CONFIG_ARV752DWP22	1	/* on the arv752DWP22 Board		*/
+
+#define CONFIG_SYS_MIPS_MULTI_CPU	1	/* This is a multi cpu system */
+
+#define CONFIG_USE_DDR_RAM
+#define CONFIG_SYS_MAX_RAM	64*1024*1024
+
+#define CONFIG_FLASH_CFI_DRIVER	1
+
+#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
+
+#ifdef CONFIG_SYS_RAMBOOT
+	//#warning CONFIG_SYS_RAMBOOT
+	#define CONFIG_SKIP_LOWLEVEL_INIT
+#else /* CONFIG_SYS_RAMBOOT */
+	#define CONFIG_SYS_EBU_BOOT
+	#define INFINEON_EBU_BOOTCFG	0x688C688C	/* CMULT = 8 for 150 MHz */
+#endif /* CONFIG_SYS_RAMBOOT */
+
+#if 1
+#ifndef	CPU_CLOCK_RATE
+#define CPU_CLOCK_RATE	(ifx_get_cpuclk())
+#endif
+#endif
+
+#define	CONFIG_SYS_PROMPT	"ARV752DWP22 => "	/* Monitor Command Prompt */
+
+#undef CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser		*/
+
+/*
+ * Include common defines/options for all Infineon boards
+ */
+#include "ifx-common.h"
+
+
+#undef CONFIG_EXTRA_ENV_SETTINGS                                       
+#define CONFIG_EXTRA_ENV_SETTINGS                                       \
+        "ram_addr=0x80500000\0"                                         \
+        "kernel_addr=0xb0050000\0"                                      \
+        "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
+        "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"         \
+        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+                "nfsroot=${serverip}:${rootpath} \0"                    \
+        "addip=setenv bootargs ${bootargs} "                            \
+                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+                ":${hostname}:${netdev}:off\0"                          \
+        "addmisc=setenv bootargs ${bootargs} init=/etc/preinit "        \
+                "console=ttyS1,115200 ethaddr=${ethaddr} "              \
+                "${mtdparts}\0"                                         \
+        "flash_flash=run flashargs addip addmisc;"                      \
+                "bootm ${kernel_addr}\0"                                \
+        "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"    \
+        "net_flash=run load_kernel flashargs addip addmisc;"            \
+                "bootm ${ram_addr}\0"                                   \
+        "net_nfs=run load_kernel nfsargs addip addmisc;"                \
+                "bootm ${ram_addr}\0"                                   \
+        "load_kernel=tftp ${ram_addr} "                                 \
+                "${tftppath}openwrt-ifxmips-uImage\0"                   \
+        "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
+                "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
+        "update_openwrt=tftp ${ram_addr} "                              \
+                "${tftppath}openwrt-ifxmips-squashfs.image;"            \
+                "era ${kernel_addr} +${filesize};"                      \
+                "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
+
+/*
+ * Cache Configuration (cpu/chip specific, Danube)
+ */
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_MIPS_CACHE_OPER_MODE	CONF_CM_CACHABLE_NO_WA
+
+#define CONFIG_NET_MULTI
+#if 0
+#define CONFIG_M4530_ETH
+#define CONFIG_M4530_FPGA
+#endif
+
+#define CONFIG_IFX_ETOP
+//#define CLK_OUT2_25MHZ
+#define CONFIG_EXTRA_SWITCH
+
+//#define CONFIG_RMII			/*  use interface in RMII mode */
+
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+
+#define CONFIG_IFX_ASC
+
+#ifdef CONFIG_USE_ASC0
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100400
+#else
+#define CONFIG_SYS_IFX_ASC_BASE		0x1E100C00
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+/* Configuration of EBU: */
+/* starting address from 0xb0000000 */
+/* make the flash available from RAM boot */
+#	define CONFIG_EBU_ADDSEL0		0x10000031
+#	define CONFIG_EBU_BUSCON0		0x0001D7FF
+#	define CONFIG_EBU_ADDSEL1		0x14000001
+#	define CONFIG_EBU_BUSCON1		0x4041D7FD
+#endif
+
+#define CONFIG_CMD_HTTPD		/* enable upgrade via HTTPD */
+
+//#define CONFIG_ETHADDR		00:13:f7:df:1c:80
+//#define CONFIG_ETHADDR		11:22:33:44:55:66
+#define CONFIG_IPADDR		192.168.2.1
+#define CONFIG_SERVERIP		192.168.2.101
+#define CONFIG_GATEWAYIP	192.168.2.254
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_ROOTPATH		"/export"
+
+#endif	/* __CONFIG_H */