[lantiq] move ltq-adsl

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34693 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 1249 insertions, 0 deletions

diff --git a/package/platform/lantiq/ltq-adsl/Config.in b/package/platform/lantiq/ltq-adsl/Config.in
new file mode 100644
index 000000000..6d9caf441
--- /dev/null
+++ b/package/platform/lantiq/ltq-adsl/Config.in
@@ -0,0 +1,5 @@
+config LANTIQ_DSL_DEBUG
+	bool "verbose debugging"
+	depends on PACKAGE_kmod-ltq-dsl
+	help
+	  Say Y, if you need ltq-dsl to display debug messages.
diff --git a/package/platform/lantiq/ltq-adsl/Makefile b/package/platform/lantiq/ltq-adsl/Makefile
new file mode 100644
index 000000000..6a0daa25c
--- /dev/null
+++ b/package/platform/lantiq/ltq-adsl/Makefile
@@ -0,0 +1,96 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ltq-adsl
+PKG_VERSION:=3.24.4.4
+PKG_RELEASE:=1
+PKG_SOURCE:=drv_dsl_cpe_api_danube-$(PKG_VERSION).tar.gz
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/ltq-dsl-$(BUILD_VARIANT)/drv_dsl_cpe_api-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+PKG_MD5SUM:=c45bc531c1ed2ac80f68fb986b63bb87
+PKG_MAINTAINER:=John Crispin <blogic@openwrt.org>
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/ltq-adsl-template
+  SECTION:=sys
+  CATEGORY:=Kernel modules
+  SUBMENU:=Network Devices
+  TITLE:=adsl driver for $(1)
+  URL:=http://www.lantiq.com/
+  VARIANT:=$(1)
+  DEPENDS:=@TARGET_lantiq_$(2) +kmod-ltq-adsl-$(1)-mei
+  FILES:=$(PKG_BUILD_DIR)/src/drv_dsl_cpe_api.ko
+  AUTOLOAD:=$(call AutoLoad,51,drv_dsl_cpe_api)
+endef
+
+KernelPackage/ltq-adsl-danube=$(call KernelPackage/ltq-adsl-template,danube,xway)
+KernelPackage/ltq-adsl-ar9=$(call KernelPackage/ltq-adsl-template,ar9,xway)
+KernelPackage/ltq-adsl-ase=$(call KernelPackage/ltq-adsl-template,ase,ase)
+
+define KernelPackage/ltq-dsl/config
+	source "$(SOURCE)/Config.in"
+endef
+
+IFX_DSL_MAX_DEVICE=1
+IFX_DSL_LINES_PER_DEVICE=1
+IFX_DSL_CHANNELS_PER_LINE=1
+
+CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
+	--with-max-device="$(IFX_DSL_MAX_DEVICE)" \
+	--with-lines-per-device="$(IFX_DSL_LINES_PER_DEVICE)" \
+	--with-channels-per-line="$(IFX_DSL_CHANNELS_PER_LINE)" \
+	--disable-dsl-delt-static \
+	--disable-adsl-led \
+	--enable-dsl-ceoc \
+	--enable-dsl-pm \
+	--enable-dsl-pm-total \
+	--enable-dsl-pm-history \
+	--enable-dsl-pm-showtime \
+	--enable-dsl-pm-channel-counters \
+	--enable-dsl-pm-datapath-counters \
+	--enable-dsl-pm-line-counters \
+	--enable-dsl-pm-channel-thresholds \
+	--enable-dsl-pm-datapath-thresholds \
+	--enable-dsl-pm-line-thresholds \
+	--enable-dsl-pm-optional-parameters \
+	--enable-linux-26 \
+	--enable-kernelbuild="$(LINUX_DIR)" \
+	ARCH=$(LINUX_KARCH)
+
+CONFIG_TAG_danube:=DANUBE
+CONFIG_TAG_ase:=AMAZON_SE
+CONFIG_TAG_ar9:=AR9
+CONFIGURE_ARGS += --enable-add-drv-cflags="-DMODULE -DCONFIG_$(CONFIG_TAG_$(BUILD_VARIANT))"
+
+CONFIGURE_ARGS += --enable-danube
+
+ifeq ($(CONFIG_LANTIQ_DSL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug=yes \
+	--enable-debug-prints=yes
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+EXTRA_CFLAGS = -fno-pic -mno-abicalls -mlong-calls -G 0
+
+define Build/Configure
+	(cd $(PKG_BUILD_DIR); aclocal && autoconf && automake)
+	$(call Build/Configure/Default)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/adsl
+	$(CP) $(PKG_BUILD_DIR)/src/include/drv_dsl_cpe_*.h $(1)/usr/include/adsl/
+endef
+
+$(eval $(call KernelPackage,ltq-adsl-danube))
+$(eval $(call KernelPackage,ltq-adsl-ase))
+$(eval $(call KernelPackage,ltq-adsl-ar9))
diff --git a/package/platform/lantiq/ltq-adsl/patches/100-dsl_compat.patch b/package/platform/lantiq/ltq-adsl/patches/100-dsl_compat.patch
new file mode 100644
index 000000000..f2ed230bd
--- /dev/null
+++ b/package/platform/lantiq/ltq-adsl/patches/100-dsl_compat.patch
@@ -0,0 +1,1065 @@
+Index: drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_device_danube.h
+===================================================================
+--- drv_dsl_cpe_api-3.24.4.4.orig/src/include/drv_dsl_cpe_device_danube.h	2009-05-12 20:02:16.000000000 +0200
++++ drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_device_danube.h	2012-11-29 19:47:21.060210322 +0100
+@@ -24,7 +24,7 @@
+    #include "drv_dsl_cpe_simulator_danube.h"
+ #else
+ /* Include for the low level driver interface header file */
+-#include "asm/ifx/ifx_mei_bsp.h"
++#include "ifxmips_mei_interface.h"
+ #endif /* defined(DSL_CPE_SIMULATOR_DRIVER) && defined(WIN32)*/
+ 
+ #define DSL_MAX_LINE_NUMBER 1
+Index: drv_dsl_cpe_api-3.24.4.4/src/common/drv_dsl_cpe_os_linux.c
+===================================================================
+--- drv_dsl_cpe_api-3.24.4.4.orig/src/common/drv_dsl_cpe_os_linux.c	2009-07-13 11:33:43.000000000 +0200
++++ drv_dsl_cpe_api-3.24.4.4/src/common/drv_dsl_cpe_os_linux.c	2012-11-29 19:46:32.700209112 +0100
+@@ -11,6 +11,7 @@
+ #ifdef __LINUX__
+ 
+ #define DSL_INTERN
++#include <linux/device.h>
+ 
+ #include "drv_dsl_cpe_api.h"
+ #include "drv_dsl_cpe_api_ioctl.h"
+@@ -34,9 +35,13 @@
+ static DSL_ssize_t DSL_DRV_Write(DSL_DRV_file_t *pFile, const DSL_char_t * pBuf,
+                                  DSL_DRV_size_t nSize, DSL_DRV_offset_t * pLoff);
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36))
+ static DSL_int_t DSL_DRV_Ioctls(DSL_DRV_inode_t * pINode, DSL_DRV_file_t * pFile,
+                          DSL_uint_t nCommand, unsigned long nArg);
+-
++#else
++static DSL_int_t DSL_DRV_Ioctls(DSL_DRV_file_t * pFile,
++                         DSL_uint_t nCommand, unsigned long nArg);
++#endif
+ static int DSL_DRV_Open(DSL_DRV_inode_t * ino, DSL_DRV_file_t * fil);
+ 
+ static int DSL_DRV_Release(DSL_DRV_inode_t * ino, DSL_DRV_file_t * fil);
+@@ -72,7 +77,11 @@
+    open:    DSL_DRV_Open,
+    release: DSL_DRV_Release,
+    write:   DSL_DRV_Write,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36))
+    ioctl:   DSL_DRV_Ioctls,
++#else
++   unlocked_ioctl:   DSL_DRV_Ioctls,
++#endif
+    poll:    DSL_DRV_Poll
+ };
+ #else
+@@ -168,10 +177,17 @@
+    \return  Success or failure.
+    \ingroup Internal
+ */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36))
+ static DSL_int_t DSL_DRV_Ioctls(DSL_DRV_inode_t * pINode,
+    DSL_DRV_file_t * pFile,
+    DSL_uint_t nCommand,
+    unsigned long nArg)
++#else
++static DSL_int_t DSL_DRV_Ioctls(
++   DSL_DRV_file_t * pFile,
++   DSL_uint_t nCommand,
++   unsigned long nArg)
++#endif
+ {
+    DSL_int_t nErr=0;
+    DSL_boolean_t bIsInKernel;
+@@ -216,16 +232,7 @@
+          }
+       }
+    }
+-
+-   if (pINode == DSL_NULL)
+-   {
+-      bIsInKernel = DSL_TRUE;
+-   }
+-   else
+-   {
+-      bIsInKernel = DSL_FALSE;
+-   }
+-
++   bIsInKernel = DSL_FALSE;
+    if ( (_IOC_TYPE(nCommand) == DSL_IOC_MAGIC_CPE_API) ||
+         (_IOC_TYPE(nCommand) == DSL_IOC_MAGIC_CPE_API_G997) ||
+         (_IOC_TYPE(nCommand) == DSL_IOC_MAGIC_CPE_API_PM) ||
+@@ -1058,6 +1065,7 @@
+ /* Entry point of driver */
+ int __init DSL_ModuleInit(void)
+ {
++   struct class *dsl_class;
+    DSL_int_t i;
+ 
+    printk(DSL_DRV_CRLF DSL_DRV_CRLF "Infineon CPE API Driver version: %s" DSL_DRV_CRLF,
+@@ -1104,7 +1112,8 @@
+    }
+ 
+    DSL_DRV_DevNodeInit();
+-
++   dsl_class = class_create(THIS_MODULE, "dsl_cpe_api");
++   device_create(dsl_class, NULL, MKDEV(DRV_DSL_CPE_API_DEV_MAJOR, 0), NULL, "dsl_cpe_api");
+    return 0;
+ }
+ 
+Index: drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_os_linux.h
+===================================================================
+--- drv_dsl_cpe_api-3.24.4.4.orig/src/include/drv_dsl_cpe_os_linux.h	2009-07-03 17:04:51.000000000 +0200
++++ drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_os_linux.h	2012-11-29 19:47:23.092210377 +0100
+@@ -17,17 +17,17 @@
+ #endif
+ 
+ #include <asm/ioctl.h>
+-#include <linux/autoconf.h>
++#include <generated/autoconf.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/ctype.h>
+ #include <linux/version.h>
+ #include <linux/spinlock.h>
+-
++#include <linux/sched.h>
+ 
+ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-   #include <linux/utsrelease.h>
++   #include <generated/utsrelease.h>
+ #endif
+ 
+ #include <linux/types.h>
+Index: drv_dsl_cpe_api-3.24.4.4/src/ifxmips_mei_interface.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ drv_dsl_cpe_api-3.24.4.4/src/ifxmips_mei_interface.h	2012-11-29 19:47:54.972211177 +0100
+@@ -0,0 +1,702 @@
++/******************************************************************************
++
++                               Copyright (c) 2009
++                            Infineon Technologies AG
++                     Am Campeon 1-12; 81726 Munich, Germany
++
++  For licensing information, see the file 'LICENSE' in the root folder of
++  this software module.
++
++******************************************************************************/
++
++#ifndef IFXMIPS_MEI_H
++#define IFXMIPS_MEI_H
++
++//#define CONFIG_AMAZON_SE 1
++//#define CONFIG_DANUBE 1
++//#define CONFIG_AR9 1
++
++#if !defined(CONFIG_DANUBE) && !defined(CONFIG_AMAZON_SE) && !defined(CONFIG_AR9) && !defined(CONFIG_VR9)
++#error Platform undefined!!!
++#endif
++
++#ifdef IFX_MEI_BSP
++/** This is the character datatype. */
++typedef char            DSL_char_t;
++/** This is the unsigned 8-bit datatype. */
++typedef unsigned char   DSL_uint8_t;
++/** This is the signed 8-bit datatype. */
++typedef signed char     DSL_int8_t;
++/** This is the unsigned 16-bit datatype. */
++typedef unsigned short  DSL_uint16_t;
++/** This is the signed 16-bit datatype. */
++typedef signed short    DSL_int16_t;
++/** This is the unsigned 32-bit datatype. */
++typedef unsigned long   DSL_uint32_t;
++/** This is the signed 32-bit datatype. */
++typedef signed long     DSL_int32_t;
++/** This is the float datatype. */
++typedef float           DSL_float_t;
++/** This is the void datatype. */
++typedef void            DSL_void_t;
++/** integer type, width is depending on processor arch */
++typedef int             DSL_int_t;
++/** unsigned integer type, width is depending on processor arch */
++typedef unsigned int    DSL_uint_t;
++typedef struct file DSL_DRV_file_t;
++typedef struct inode DSL_DRV_inode_t;
++
++/**
++ *    Defines all possible CMV groups
++ *    */
++typedef enum {
++   DSL_CMV_GROUP_CNTL = 1,
++   DSL_CMV_GROUP_STAT = 2,
++   DSL_CMV_GROUP_INFO = 3,
++   DSL_CMV_GROUP_TEST = 4,
++   DSL_CMV_GROUP_OPTN = 5,
++   DSL_CMV_GROUP_RATE = 6,
++   DSL_CMV_GROUP_PLAM = 7,
++   DSL_CMV_GROUP_CNFG = 8
++} DSL_CmvGroup_t;
++/**
++ *    Defines all opcode types
++ *    */
++typedef enum {
++   H2D_CMV_READ = 0x00,
++   H2D_CMV_WRITE = 0x04,
++   H2D_CMV_INDICATE_REPLY = 0x10,
++   H2D_ERROR_OPCODE_UNKNOWN =0x20,
++   H2D_ERROR_CMV_UNKNOWN =0x30,
++
++   D2H_CMV_READ_REPLY =0x01,
++   D2H_CMV_WRITE_REPLY = 0x05,
++   D2H_CMV_INDICATE = 0x11,
++   D2H_ERROR_OPCODE_UNKNOWN = 0x21,
++   D2H_ERROR_CMV_UNKNOWN = 0x31,
++   D2H_ERROR_CMV_READ_NOT_AVAILABLE = 0x41,
++   D2H_ERROR_CMV_WRITE_ONLY = 0x51,
++   D2H_ERROR_CMV_READ_ONLY = 0x61,
++
++   H2D_DEBUG_READ_DM = 0x02,
++   H2D_DEBUG_READ_PM = 0x06,
++   H2D_DEBUG_WRITE_DM = 0x0a,
++   H2D_DEBUG_WRITE_PM = 0x0e,
++
++   D2H_DEBUG_READ_DM_REPLY = 0x03,
++   D2H_DEBUG_READ_FM_REPLY = 0x07,
++   D2H_DEBUG_WRITE_DM_REPLY = 0x0b,
++   D2H_DEBUG_WRITE_FM_REPLY = 0x0f,
++   D2H_ERROR_ADDR_UNKNOWN = 0x33,
++
++   D2H_AUTONOMOUS_MODEM_READY_MSG = 0xf1
++} DSL_CmvOpcode_t;
++
++/* mutex macros */
++#define MEI_MUTEX_INIT(id,flag) \
++        sema_init(&id,flag)
++#define MEI_MUTEX_LOCK(id) \
++        down_interruptible(&id)
++#define MEI_MUTEX_UNLOCK(id) \
++        up(&id)
++#define MEI_WAIT(ms) \
++        {\
++                set_current_state(TASK_INTERRUPTIBLE);\
++                schedule_timeout(ms);\
++        }
++#define MEI_INIT_WAKELIST(name,queue) \
++        init_waitqueue_head(&queue)
++
++/* wait for an event, timeout is measured in ms */
++#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
++        interruptible_sleep_on_timeout(&ev,timeout * HZ / 1000)
++#define MEI_WAKEUP_EVENT(ev)\
++        wake_up_interruptible(&ev)
++#endif /* IFX_MEI_BSP */
++
++/***	Register address offsets, relative to MEI_SPACE_ADDRESS ***/
++#define ME_DX_DATA				(0x0000)
++#define	ME_VERSION				(0x0004)
++#define	ME_ARC_GP_STAT				(0x0008)
++#define ME_DX_STAT				(0x000C)
++#define	ME_DX_AD				(0x0010)
++#define ME_DX_MWS				(0x0014)
++#define	ME_ME2ARC_INT				(0x0018)
++#define	ME_ARC2ME_STAT				(0x001C)
++#define	ME_ARC2ME_MASK 				(0x0020)
++#define	ME_DBG_WR_AD				(0x0024)
++#define ME_DBG_RD_AD				(0x0028)
++#define	ME_DBG_DATA				(0x002C)
++#define	ME_DBG_DECODE				(0x0030)
++#define ME_CONFIG				(0x0034)
++#define	ME_RST_CTRL				(0x0038)
++#define	ME_DBG_MASTER				(0x003C)
++#define	ME_CLK_CTRL				(0x0040)
++#define	ME_BIST_CTRL				(0x0044)
++#define	ME_BIST_STAT				(0x0048)
++#define ME_XDATA_BASE_SH			(0x004c)
++#define ME_XDATA_BASE				(0x0050)
++#define ME_XMEM_BAR_BASE			(0x0054)
++#define ME_XMEM_BAR0				(0x0054)
++#define ME_XMEM_BAR1				(0x0058)
++#define ME_XMEM_BAR2				(0x005C)
++#define ME_XMEM_BAR3				(0x0060)
++#define ME_XMEM_BAR4				(0x0064)
++#define ME_XMEM_BAR5				(0x0068)
++#define ME_XMEM_BAR6				(0x006C)
++#define ME_XMEM_BAR7				(0x0070)
++#define ME_XMEM_BAR8				(0x0074)
++#define ME_XMEM_BAR9				(0x0078)
++#define ME_XMEM_BAR10				(0x007C)
++#define ME_XMEM_BAR11				(0x0080)
++#define ME_XMEM_BAR12				(0x0084)
++#define ME_XMEM_BAR13				(0x0088)
++#define ME_XMEM_BAR14				(0x008C)
++#define ME_XMEM_BAR15				(0x0090)
++#define ME_XMEM_BAR16				(0x0094)
++
++#define WHILE_DELAY 		20000
++/*
++**	Define where in ME Processor's memory map the Stratify chip lives
++*/
++
++#define MAXSWAPSIZE      	(8 * 1024)	//8k *(32bits)
++
++//      Mailboxes
++#define MSG_LENGTH		16	// x16 bits
++#define YES_REPLY      	 	1
++#define NO_REPLY         	0
++
++#define CMV_TIMEOUT		1000	//jiffies
++
++//  Block size per BAR
++#define SDRAM_SEGMENT_SIZE	(64*1024)
++// Number of Bar registers
++#define MAX_BAR_REGISTERS	(17)
++
++#define XDATA_REGISTER		(15)
++
++// ARC register addresss
++#define ARC_STATUS		0x0
++#define ARC_LP_START		0x2
++#define ARC_LP_END		0x3
++#define ARC_DEBUG		0x5
++#define ARC_INT_MASK		0x10A
++
++#define IRAM0_BASE 		(0x00000)
++#define IRAM1_BASE 		(0x04000)
++#if defined(CONFIG_DANUBE)
++#define BRAM_BASE  		(0x0A000)
++#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
++#define BRAM_BASE               (0x08000)
++#endif
++#define XRAM_BASE		(0x18000)
++#define YRAM_BASE		(0x1A000)
++#define EXT_MEM_BASE		(0x80000)
++#define ARC_GPIO_CTRL		(0xC030)
++#define ARC_GPIO_DATA		(0xC034)
++
++#define IRAM0_SIZE		(16*1024)
++#define IRAM1_SIZE		(16*1024)
++#define BRAM_SIZE		(12*1024)
++#define XRAM_SIZE		(8*1024)
++#define YRAM_SIZE		(8*1024)
++#define EXT_MEM_SIZE		(1536*1024)
++
++#define ADSL_BASE		(0x20000)
++#define CRI_BASE		(ADSL_BASE + 0x11F00)
++#define CRI_CCR0		(CRI_BASE + 0x00)
++#define CRI_RST			(CRI_BASE + 0x04*4)
++#define ADSL_DILV_BASE 		(ADSL_BASE+0x20000)
++
++//
++#define IRAM0_ADDR_BIT_MASK	0xFFF
++#define IRAM1_ADDR_BIT_MASK	0xFFF
++#define BRAM_ADDR_BIT_MASK	0xFFF
++#define RX_DILV_ADDR_BIT_MASK	0x1FFF
++
++/***  Bit definitions ***/
++#define ARC_AUX_HALT		(1 << 25)
++#define ARC_DEBUG_HALT		(1 << 1)
++#define FALSE			0
++#define TRUE			1
++#define BIT0			(1<<0)
++#define BIT1			(1<<1)
++#define BIT2			(1<<2)
++#define BIT3			(1<<3)
++#define BIT4			(1<<4)
++#define BIT5			(1<<5)
++#define BIT6			(1<<6)
++#define BIT7			(1<<7)
++#define BIT8			(1<<8)
++#define BIT9			(1<<9)
++#define BIT10 			(1<<10)
++#define BIT11			(1<<11)
++#define BIT12			(1<<12)
++#define BIT13			(1<<13)
++#define BIT14			(1<<14)
++#define BIT15			(1<<15)
++#define BIT16 			(1<<16)
++#define BIT17			(1<<17)
++#define BIT18			(1<<18)
++#define BIT19			(1<<19)
++#define BIT20			(1<<20)
++#define BIT21			(1<<21)
++#define BIT22			(1<<22)
++#define BIT23			(1<<23)
++#define BIT24			(1<<24)
++#define BIT25			(1<<25)
++#define BIT26			(1<<26)
++#define BIT27			(1<<27)
++#define BIT28			(1<<28)
++#define BIT29			(1<<29)
++#define BIT30			(1<<30)
++#define BIT31			(1<<31)
++
++// CRI_CCR0 Register definitions
++#define CLK_2M_MODE_ENABLE	BIT6
++#define	ACL_CLK_MODE_ENABLE	BIT4
++#define FDF_CLK_MODE_ENABLE	BIT2
++#define STM_CLK_MODE_ENABLE	BIT0
++
++// CRI_RST Register definitions
++#define FDF_SRST		BIT3
++#define MTE_SRST		BIT2
++#define FCI_SRST		BIT1
++#define AAI_SRST		BIT0
++
++//      MEI_TO_ARC_INTERRUPT Register definitions
++#define	MEI_TO_ARC_INT1		BIT3
++#define	MEI_TO_ARC_INT0		BIT2
++#define MEI_TO_ARC_CS_DONE	BIT1	//need to check
++#define	MEI_TO_ARC_MSGAV	BIT0
++
++//      ARC_TO_MEI_INTERRUPT Register definitions
++#define	ARC_TO_MEI_INT1		BIT8
++#define	ARC_TO_MEI_INT0		BIT7
++#define	ARC_TO_MEI_CS_REQ	BIT6
++#define	ARC_TO_MEI_DBG_DONE	BIT5
++#define	ARC_TO_MEI_MSGACK	BIT4
++#define	ARC_TO_MEI_NO_ACCESS	BIT3
++#define	ARC_TO_MEI_CHECK_AAITX	BIT2
++#define	ARC_TO_MEI_CHECK_AAIRX	BIT1
++#define	ARC_TO_MEI_MSGAV	BIT0
++
++//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
++#define	GP_INT1_EN		BIT8
++#define	GP_INT0_EN		BIT7
++#define	CS_REQ_EN		BIT6
++#define	DBG_DONE_EN		BIT5
++#define	MSGACK_EN		BIT4
++#define	NO_ACC_EN		BIT3
++#define	AAITX_EN		BIT2
++#define	AAIRX_EN		BIT1
++#define	MSGAV_EN		BIT0
++
++#define	MEI_SOFT_RESET		BIT0
++
++#define	HOST_MSTR		BIT0
++
++#define JTAG_MASTER_MODE	0x0
++#define MEI_MASTER_MODE		HOST_MSTR
++
++//      MEI_DEBUG_DECODE Register definitions
++#define MEI_DEBUG_DEC_MASK	(0x3)
++#define MEI_DEBUG_DEC_AUX_MASK	(0x0)
++#define ME_DBG_DECODE_DMP1_MASK	(0x1)
++#define MEI_DEBUG_DEC_DMP2_MASK	(0x2)
++#define MEI_DEBUG_DEC_CORE_MASK	(0x3)
++
++#define AUX_STATUS		(0x0)
++#define AUX_ARC_GPIO_CTRL	(0x10C)
++#define AUX_ARC_GPIO_DATA	(0x10D)
++//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
++//      page swap requests.
++#if defined(CONFIG_DANUBE)
++#define OMBOX_BASE      	0xDF80
++#define	ARC_TO_MEI_MAILBOX	0xDFA0
++#define IMBOX_BASE      	0xDFC0
++#define MEI_TO_ARC_MAILBOX	0xDFD0
++#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
++#define OMBOX_BASE              0xAF80
++#define ARC_TO_MEI_MAILBOX      0xAFA0
++#define IMBOX_BASE              0xAFC0
++#define MEI_TO_ARC_MAILBOX      0xAFD0
++#endif
++
++#define MEI_TO_ARC_MAILBOXR	(MEI_TO_ARC_MAILBOX + 0x2C)
++#define ARC_MEI_MAILBOXR	(ARC_TO_MEI_MAILBOX + 0x2C)
++#define OMBOX1  		(OMBOX_BASE+0x4)
++
++// Codeswap request messages are indicated by setting BIT31
++#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK	(0x80000000)
++
++// Clear Eoc messages received are indicated by setting BIT17
++#define OMB_CLEAREOC_INTERRUPT_CODE		(0x00020000)
++#define OMB_REBOOT_INTERRUPT_CODE               (1 << 18)
++
++/*
++**	Swap page header
++*/
++//      Page must be loaded at boot time if size field has BIT31 set
++#define BOOT_FLAG		(BIT31)
++#define BOOT_FLAG_MASK		~BOOT_FLAG
++
++#define FREE_RELOAD		1
++#define FREE_SHOWTIME		2
++#define FREE_ALL		3
++
++// marcos
++#define	IFX_MEI_WRITE_REGISTER_L(data,addr)	*((volatile u32*)(addr)) = (u32)(data)
++#define IFX_MEI_READ_REGISTER_L(addr) 	(*((volatile u32*)(addr)))
++#define SET_BIT(reg, mask)			reg |= (mask)
++#define CLEAR_BIT(reg, mask)			reg &= (~mask)
++#define CLEAR_BITS(reg, mask)			CLEAR_BIT(reg, mask)
++//#define SET_BITS(reg, mask)			SET_BIT(reg, mask)
++#define SET_BITFIELD(reg, mask, off, val)	{reg &= (~mask); reg |= (val << off);}
++
++#define ALIGN_SIZE				( 1L<<10 )	//1K size align
++#define MEM_ALIGN(addr)				(((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
++
++// swap marco
++#define MEI_HALF_WORD_SWAP(data)		{data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
++#define MEI_BYTE_SWAP(data)			{data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
++
++
++#ifdef CONFIG_PROC_FS
++typedef struct reg_entry
++{
++   int *flag;
++   char name[30];               /* big enough to hold names */
++   char description[100];       /* big enough to hold description */
++   unsigned short low_ino;
++} reg_entry_t;
++#endif
++//      Swap page header describes size in 32-bit words, load location, and image offset
++//      for program and/or data segments
++typedef struct _arc_swp_page_hdr {
++	u32 p_offset;		//Offset bytes of progseg from beginning of image
++	u32 p_dest;		//Destination addr of progseg on processor
++	u32 p_size;		//Size in 32-bitwords of program segment
++	u32 d_offset;		//Offset bytes of dataseg from beginning of image
++	u32 d_dest;		//Destination addr of dataseg on processor
++	u32 d_size;		//Size in 32-bitwords of data segment
++} ARC_SWP_PAGE_HDR;
++
++/*
++**	Swap image header
++*/
++#define GET_PROG	0	//      Flag used for program mem segment
++#define GET_DATA	1	//      Flag used for data mem segment
++
++//      Image header contains size of image, checksum for image, and count of
++//      page headers. Following that are 'count' page headers followed by
++//      the code and/or data segments to be loaded
++typedef struct _arc_img_hdr {
++	u32 size;		//      Size of binary image in bytes
++	u32 checksum;		//      Checksum for image
++	u32 count;		//      Count of swp pages in image
++	ARC_SWP_PAGE_HDR page[1];	//      Should be "count" pages - '1' to make compiler happy
++} ARC_IMG_HDR;
++
++typedef struct smmu_mem_info {
++	int type;
++	int boot;
++	unsigned long nCopy;
++	unsigned long size;
++	unsigned char *address;
++	unsigned char *org_address;
++} smmu_mem_info_t;
++
++#ifdef __KERNEL__
++typedef struct ifx_mei_device_private {
++	int modem_ready;
++	int arcmsgav;
++	int cmv_reply;
++	int cmv_waiting;
++	// Mei to ARC CMV count, reply count, ARC Indicator count
++	int modem_ready_cnt;
++	int cmv_count;
++	int reply_count;
++	unsigned long image_size;
++	int nBar;
++	u16 Recent_indicator[MSG_LENGTH];
++
++	u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
++
++	smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
++	ARC_IMG_HDR *img_hdr;
++	//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
++	wait_queue_head_t wait_queue_arcmsgav;
++	wait_queue_head_t wait_queue_modemready;
++	struct semaphore mei_cmv_sema;
++} ifx_mei_device_private_t;
++#endif
++typedef struct winhost_message {
++	union {
++		u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
++		u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
++	} msg;
++} DSL_DEV_WinHost_Message_t;
++/********************************************************************************************************
++ * DSL CPE API Driver Stack Interface Definitions
++ * *****************************************************************************************************/
++/** IOCTL codes for bsp driver */
++#define DSL_IOC_MEI_BSP_MAGIC		's'
++
++#define DSL_FIO_BSP_DSL_START		_IO  (DSL_IOC_MEI_BSP_MAGIC, 0)
++#define DSL_FIO_BSP_RUN			_IO  (DSL_IOC_MEI_BSP_MAGIC, 1)
++#define DSL_FIO_BSP_FREE_RESOURCE	_IO  (DSL_IOC_MEI_BSP_MAGIC, 2)
++#define DSL_FIO_BSP_RESET		_IO  (DSL_IOC_MEI_BSP_MAGIC, 3)
++#define DSL_FIO_BSP_REBOOT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 4)
++#define DSL_FIO_BSP_HALT		_IO  (DSL_IOC_MEI_BSP_MAGIC, 5)
++#define DSL_FIO_BSP_BOOTDOWNLOAD	_IO  (DSL_IOC_MEI_BSP_MAGIC, 6)
++#define DSL_FIO_BSP_JTAG_ENABLE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 7)
++#define DSL_FIO_FREE_RESOURCE		_IO  (DSL_IOC_MEI_BSP_MAGIC, 8)
++#define DSL_FIO_ARC_MUX_TEST		_IO  (DSL_IOC_MEI_BSP_MAGIC, 9)
++#define DSL_FIO_BSP_REMOTE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 10, u32)
++#define DSL_FIO_BSP_GET_BASE_ADDRESS	_IOR (DSL_IOC_MEI_BSP_MAGIC, 11, u32)
++#define DSL_FIO_BSP_IS_MODEM_READY	_IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32)
++#define DSL_FIO_BSP_GET_VERSION		_IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t)
++#define DSL_FIO_BSP_CMV_WINHOST		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, DSL_DEV_WinHost_Message_t)
++#define DSL_FIO_BSP_CMV_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, DSL_DEV_MeiReg_t)
++#define DSL_FIO_BSP_CMV_WRITE		_IOW (DSL_IOC_MEI_BSP_MAGIC, 16, DSL_DEV_MeiReg_t)
++#define DSL_FIO_BSP_DEBUG_READ		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, DSL_DEV_MeiDebug_t)
++#define DSL_FIO_BSP_DEBUG_WRITE		_IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, DSL_DEV_MeiDebug_t)
++#define DSL_FIO_BSP_GET_CHIP_INFO	_IOR (DSL_IOC_MEI_BSP_MAGIC, 19, DSL_DEV_HwVersion_t)
++
++#define DSL_DEV_MEIDEBUG_BUFFER_SIZES	512
++
++typedef struct DSL_DEV_MeiDebug
++{
++	DSL_uint32_t iAddress;
++	DSL_uint32_t iCount;
++	DSL_uint32_t buffer[DSL_DEV_MEIDEBUG_BUFFER_SIZES];
++} DSL_DEV_MeiDebug_t;			/* meidebug */
++
++/**
++ *    Structure is used for debug access only.
++ *       Refer to configure option INCLUDE_ADSL_WINHOST_DEBUG */
++typedef struct struct_meireg
++{
++	/*
++	*       Specifies that address for debug access */
++	unsigned long iAddress;
++	/*
++	*       Specifies the pointer to the data that has to be written or returns a
++	*             pointer to the data that has been read out*/
++	unsigned long iData;
++} DSL_DEV_MeiReg_t;					/* meireg */
++
++typedef struct DSL_DEV_Device
++{
++	DSL_int_t nInUse;                /* modem state, update by bsp driver, */
++	DSL_void_t *pPriv;
++	DSL_uint32_t base_address;       /* mei base address */
++	DSL_int_t nIrq[2];                  /* irq number */
++#define IFX_DFEIR		0
++#define IFX_DYING_GASP	1
++	DSL_DEV_MeiDebug_t lop_debugwr;  /* dying gasp */
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0))
++	struct module *owner;
++#endif
++} DSL_DEV_Device_t;			/* ifx_adsl_device_t */
++
++#define DSL_DEV_PRIVATE(dev)  ((ifx_mei_device_private_t*)(dev->pPriv))
++
++typedef struct DSL_DEV_Version		/* ifx_adsl_bsp_version */
++{
++	unsigned long major;
++	unsigned long minor;
++	unsigned long revision;
++} DSL_DEV_Version_t;			/* ifx_adsl_bsp_version_t */
++
++typedef struct DSL_DEV_ChipInfo
++{
++	unsigned long major;
++	unsigned long minor;
++} DSL_DEV_HwVersion_t;
++
++typedef struct
++{
++	DSL_uint8_t dummy;
++} DSL_DEV_DeviceConfig_t;
++
++/** error code definitions */
++typedef enum DSL_DEV_MeiError
++{
++	DSL_DEV_MEI_ERR_SUCCESS = 0,
++	DSL_DEV_MEI_ERR_FAILURE = -1,
++	DSL_DEV_MEI_ERR_MAILBOX_FULL = -2,
++	DSL_DEV_MEI_ERR_MAILBOX_EMPTY = -3,
++	DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT = -4
++} DSL_DEV_MeiError_t;			/* MEI_ERROR */
++
++typedef enum {
++	DSL_BSP_MEMORY_READ=0,
++	DSL_BSP_MEMORY_WRITE,
++} DSL_BSP_MemoryAccessType_t;		/* ifx_adsl_memory_access_type_t */
++
++typedef enum
++{
++	DSL_LED_LINK_ID=0,
++	DSL_LED_DATA_ID
++} DSL_DEV_LedId_t;			/* ifx_adsl_led_id_t */
++
++typedef enum
++{
++	DSL_LED_LINK_TYPE=0,
++	DSL_LED_DATA_TYPE
++} DSL_DEV_LedType_t;			/* ifx_adsl_led_type_t */
++
++typedef enum
++{
++	DSL_LED_HD_CPU=0,
++	DSL_LED_HD_FW
++} DSL_DEV_LedHandler_t;			/* ifx_adsl_led_handler_t */
++
++typedef enum {
++	DSL_LED_ON=0,
++	DSL_LED_OFF,
++	DSL_LED_FLASH,
++} DSL_DEV_LedMode_t;			/* ifx_adsl_led_mode_t */
++
++typedef enum {
++	DSL_CPU_HALT=0,
++	DSL_CPU_RUN,
++	DSL_CPU_RESET,
++} DSL_DEV_CpuMode_t;			/* ifx_adsl_cpu_mode_t */
++
++#if 0
++typedef enum {
++	DSL_BSP_EVENT_DYING_GASP = 0,
++	DSL_BSP_EVENT_CEOC_IRQ,
++} DSL_BSP_Event_id_t;			/* ifx_adsl_event_id_t */
++
++typedef union DSL_BSP_CB_Param
++{
++	DSL_uint32_t nIrqMessage;
++} DSL_BSP_CB_Param_t;			/* ifx_adsl_cbparam_t */
++
++typedef struct DSL_BSP_CB_Event
++{
++	DSL_BSP_Event_id_t nID;
++	DSL_DEV_Device_t *pDev;
++	DSL_BSP_CB_Param_t *pParam;
++} DSL_BSP_CB_Event_t;			/* ifx_adsl_cb_event_t */
++#endif
++
++/* external functions (from the BSP Driver) */
++extern DSL_DEV_Device_t* DSL_BSP_DriverHandleGet(int, int);
++extern DSL_int_t DSL_BSP_DriverHandleDelete(DSL_DEV_Device_t *);
++extern DSL_DEV_MeiError_t DSL_BSP_FWDownload(DSL_DEV_Device_t *, const DSL_char_t *, DSL_uint32_t, DSL_int32_t *, DSL_int32_t *);
++extern int DSL_BSP_KernelIoctls(DSL_DEV_Device_t *, unsigned int, unsigned long);
++extern DSL_DEV_MeiError_t DSL_BSP_SendCMV(DSL_DEV_Device_t *, DSL_uint16_t *, DSL_int_t, DSL_uint16_t *);
++extern DSL_DEV_MeiError_t DSL_BSP_AdslLedInit(DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t);
++extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t);
++extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void));
++extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t);
++extern volatile DSL_DEV_Device_t *adsl_dev;
++
++/**
++ *    Dummy structure by now to show mechanism of extended data that will be
++ *       provided within event callback itself.
++ *       */
++typedef struct
++{
++	/**
++	*    Dummy value */
++	DSL_uint32_t nDummy1;
++} DSL_BSP_CB_Event1DataDummy_t;
++
++/**
++ *    Dummy structure by now to show mechanism of extended data that will be
++ *       provided within event callback itself.
++ *       */
++typedef struct
++{
++	/**
++	*    Dummy value */
++	DSL_uint32_t nDummy2;
++} DSL_BSP_CB_Event2DataDummy_t;
++
++/**
++ *    encapsulate all data structures that are necessary for status event
++ *       callbacks.
++ *       */
++typedef union
++{
++	DSL_BSP_CB_Event1DataDummy_t dataEvent1;
++	DSL_BSP_CB_Event2DataDummy_t dataEvent2;
++} DSL_BSP_CB_DATA_Union_t;
++
++
++typedef enum
++{
++	/**
++	 *    Informs the upper layer driver (DSL CPE API) about a reboot request from the
++	 *       firmware.
++	 *          \note This event does NOT include any additional data.
++	 *                   More detailed information upon reboot reason has to be requested from
++	 *                            upper layer software via CMV (INFO 109) if necessary. */
++	DSL_BSP_CB_FIRST = 0,
++        DSL_BSP_CB_DYING_GASP,
++	DSL_BSP_CB_CEOC_IRQ,
++	DSL_BSP_CB_FIRMWARE_REBOOT,
++	/**
++	 *    Delimiter only */
++	DSL_BSP_CB_LAST
++} DSL_BSP_CB_Type_t;
++
++/**
++ *    Specifies the common event type that has to be used for registering and
++ *       signalling of interrupts/autonomous status events from MEI BSP Driver.
++ *
++ *    \param pDev
++ *    Context pointer from MEI BSP Driver.
++ *
++ *    \param IFX_ADSL_BSP_CallbackType_t
++ *    Specifies the event callback type (reason of callback). Regrading to the
++ *    setting of this value the data which is included in the following union
++ *    might have different meanings.
++ *    Please refer to the description of the union to get information about the
++ *    meaning of the included data.
++ *
++ *    \param pData
++ *    Data according to \ref DSL_BSP_CB_DATA_Union_t.
++ *    If this pointer is NULL there is no additional data available.
++ *
++ *    \return depending on event
++ */
++typedef int (*DSL_BSP_EventCallback_t)
++(
++	DSL_DEV_Device_t *pDev,
++	DSL_BSP_CB_Type_t nCallbackType,
++	DSL_BSP_CB_DATA_Union_t *pData
++);
++
++typedef struct {
++        DSL_BSP_EventCallback_t function;
++        DSL_BSP_CB_Type_t       event;
++        DSL_BSP_CB_DATA_Union_t *pData;
++} DSL_BSP_EventCallBack_t;
++
++extern int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *);
++extern int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *);
++
++/** Modem states */
++#define DSL_DEV_STAT_InitState              0x0000
++#define DSL_DEV_STAT_ReadyState             0x0001
++#define DSL_DEV_STAT_FailState              0x0002
++#define DSL_DEV_STAT_IdleState              0x0003
++#define DSL_DEV_STAT_QuietState             0x0004
++#define DSL_DEV_STAT_GhsState               0x0005
++#define DSL_DEV_STAT_FullInitState          0x0006
++#define DSL_DEV_STAT_ShowTimeState          0x0007
++#define DSL_DEV_STAT_FastRetrainState       0x0008
++#define DSL_DEV_STAT_LoopDiagMode           0x0009
++#define DSL_DEV_STAT_ShortInit              0x000A     /* Bis short initialization */
++
++#define DSL_DEV_STAT_CODESWAP_COMPLETE	    0x0002
++
++#endif //IFXMIPS_MEI_H
+--- a/configure.in
++++ b/configure.in
+@@ -310,7 +310,7 @@
+ AC_ARG_ENABLE(kernelbuild,
+     AC_HELP_STRING(--enable-kernel-build=x,Set the target kernel build path),
+     [
+-        if test -e $enableval/include/linux/autoconf.h; then
++        if test -e $enableval/include/linux/autoconf.h -o -e $enableval/include/generated/autoconf.h; then
+             AC_SUBST([KERNEL_BUILD_PATH],[$enableval])
+         else
+             AC_MSG_ERROR([The kernel build directory is not valid or not configured!])
+@@ -333,12 +333,12 @@
+             echo Set the lib_ifxos include path $enableval
+             AC_SUBST([IFXOS_INCLUDE_PATH],[$enableval])
+         else
+-            echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
++            echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+             AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
+         fi
+     ],
+     [
+-        echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
++        echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+         AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
+     ]
+ )
+@@ -1702,73 +1702,73 @@
+ AC_SUBST([DISTCHECK_CONFIGURE_PARAMS],[$CONFIGURE_OPTIONS])
+ 
+ AC_CONFIG_COMMANDS_PRE([
+-echo -e "------------------------------------------------------------------------"
+-echo -e " Configuration for drv_dsl_cpe_api:"
+-echo -e "  Configure model type:             $DSL_CONFIG_MODEL_TYPE"
+-echo -e "  Source code location:             $srcdir"
+-echo -e "  Compiler:                         $CC"
+-echo -e "  Compiler c-flags:                 $CFLAGS"
+-echo -e "  Extra compiler c-flags:           $EXTRA_DRV_CFLAGS"
+-echo -e "  Host System Type:                 $host"
+-echo -e "  Install path:                     $prefix"
+-echo -e "  Linux kernel include path:        $KERNEL_INCL_PATH"
+-echo -e "  Linux kernel build path:          $KERNEL_BUILD_PATH"
+-echo -e "  Linux kernel architecture:        $KERNEL_ARCH"
+-echo -e "  Include IFXOS:                    $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
+-echo -e "  IFXOS include path:               $IFXOS_INCLUDE_PATH"
+-echo -e "  Driver Include Path               $DSL_DRIVER_INCL_PATH"
+-echo -e "  DSL device:                       $DSL_DEVICE_NAME"
+-echo -e "  Max device number:                $DSL_DRV_MAX_DEVICE_NUMBER"
+-echo -e "  Channels per line:                $DSL_CHANNELS_PER_LINE"
+-echo -e "  Build lib (only for kernel 2.6)   $DSL_CPE_API_LIBRARY_BUILD_2_6"
+-echo -e "  DSL data led flash frequency:     $DSL_DATA_LED_FLASH_FREQUENCY Hz"
+-echo -e "  Disable debug prints:             $DSL_DEBUG_DISABLE"
+-echo -e "  Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
+-echo -e "  Preselected max. debug level:     $DSL_DBG_MAX_LEVEL_PRE"
+-echo -e "  Include deprecated functions:     $INCLUDE_DEPRECATED"
+-echo -e "  Include Device Exception Codes:   $INCLUDE_DEVICE_EXCEPTION_CODES"
+-echo -e "  Include FW request support:       $INCLUDE_FW_REQUEST_SUPPORT"
+-echo -e "  Include ADSL trace buffer:        $INCLUDE_DSL_CPE_TRACE_BUFFER"
+-echo -e "  Include ADSL MIB:                 $INCLUDE_DSL_ADSL_MIB"
+-echo -e "  Include ADSL LED:                 $INCLUDE_ADSL_LED"
+-echo -e "  Include CEOC:                     $INCLUDE_DSL_CEOC"
+-echo -e "  Include config get support:       $INCLUDE_DSL_CONFIG_GET"
+-echo -e "  Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
+-echo -e "  Include Resource Statistics:      $INCLUDE_DSL_RESOURCE_STATISTICS"
+-echo -e "  Include Framing Parameters:       $INCLUDE_DSL_FRAMING_PARAMETERS"
+-echo -e "  Include G997 Line Inventory:      $INCLUDE_DSL_G997_LINE_INVENTORY"
+-echo -e "  Include G997 Framing Parameters:  $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
+-echo -e "  Include G997 per tone data:       $INCLUDE_DSL_G997_PER_TONE"
+-echo -e "  Include G997 status:              $INCLUDE_DSL_G997_STATUS"
+-echo -e "  Include G997 alarm:               $INCLUDE_DSL_G997_ALARM"
+-echo -e "  Include DSL Bonding:              $INCLUDE_DSL_BONDING"
+-echo -e "  Include Misc Line Status          $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
+-echo -e "  Include DELT:                     $INCLUDE_DSL_DELT"
+-echo -e "  Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
+-echo -e "  Include PM:                       $INCLUDE_DSL_PM"
+-echo -e "  Include PM config:                $INCLUDE_DSL_CPE_PM_CONFIG"
+-echo -e "  Include PM total:                 $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
+-echo -e "  Include PM history:               $INCLUDE_DSL_CPE_PM_HISTORY"
+-echo -e "  Include PM showtime:              $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
+-echo -e "  Include PM optional:              $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
+-echo -e "  Include PM line:                  $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
+-echo -e "  Include PM line event showtime:   $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
+-echo -e "  Include PM channel:               $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
+-echo -e "  Include PM channel extended:      $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
+-echo -e "  Include PM data path:             $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
+-echo -e "  Include PM data path failure:     $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
+-echo -e "  Include PM ReTx:                  $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
+-echo -e "  Include PM line threshold:        $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
+-echo -e "  Include PM channel threshold:     $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
+-echo -e "  Include PM data path threshold:   $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
+-echo -e "  Include PM ReTx threshold:        $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
+-echo -e "  Include FW memory free support:   $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
+-echo -e "----------------------- deprectated ! ----------------------------------"
+-echo -e "  Include PM line failure:          $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
+-echo -e ""
+-echo -e " Settings:"
+-echo -e "  Configure options:                $CONFIGURE_OPTIONS"
+-echo -e "------------------------------------------------------------------------"
++echo "------------------------------------------------------------------------"
++echo " Configuration for drv_dsl_cpe_api:"
++echo "  Configure model type:             $DSL_CONFIG_MODEL_TYPE"
++echo "  Source code location:             $srcdir"
++echo "  Compiler:                         $CC"
++echo "  Compiler c-flags:                 $CFLAGS"
++echo "  Extra compiler c-flags:           $EXTRA_DRV_CFLAGS"
++echo "  Host System Type:                 $host"
++echo "  Install path:                     $prefix"
++echo "  Linux kernel include path:        $KERNEL_INCL_PATH"
++echo "  Linux kernel build path:          $KERNEL_BUILD_PATH"
++echo "  Linux kernel architecture:        $KERNEL_ARCH"
++echo "  Include IFXOS:                    $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
++echo "  IFXOS include path:               $IFXOS_INCLUDE_PATH"
++echo "  Driver Include Path               $DSL_DRIVER_INCL_PATH"
++echo "  DSL device:                       $DSL_DEVICE_NAME"
++echo "  Max device number:                $DSL_DRV_MAX_DEVICE_NUMBER"
++echo "  Channels per line:                $DSL_CHANNELS_PER_LINE"
++echo "  Build lib (only for kernel 2.6)   $DSL_CPE_API_LIBRARY_BUILD_2_6"
++echo "  DSL data led flash frequency:     $DSL_DATA_LED_FLASH_FREQUENCY Hz"
++echo "  Disable debug prints:             $DSL_DEBUG_DISABLE"
++echo "  Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
++echo "  Preselected max. debug level:     $DSL_DBG_MAX_LEVEL_PRE"
++echo "  Include deprecated functions:     $INCLUDE_DEPRECATED"
++echo "  Include Device Exception Codes:   $INCLUDE_DEVICE_EXCEPTION_CODES"
++echo "  Include FW request support:       $INCLUDE_FW_REQUEST_SUPPORT"
++echo "  Include ADSL trace buffer:        $INCLUDE_DSL_CPE_TRACE_BUFFER"
++echo "  Include ADSL MIB:                 $INCLUDE_DSL_ADSL_MIB"
++echo "  Include ADSL LED:                 $INCLUDE_ADSL_LED"
++echo "  Include CEOC:                     $INCLUDE_DSL_CEOC"
++echo "  Include config get support:       $INCLUDE_DSL_CONFIG_GET"
++echo "  Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
++echo "  Include Resource Statistics:      $INCLUDE_DSL_RESOURCE_STATISTICS"
++echo "  Include Framing Parameters:       $INCLUDE_DSL_FRAMING_PARAMETERS"
++echo "  Include G997 Line Inventory:      $INCLUDE_DSL_G997_LINE_INVENTORY"
++echo "  Include G997 Framing Parameters:  $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
++echo "  Include G997 per tone data:       $INCLUDE_DSL_G997_PER_TONE"
++echo "  Include G997 status:              $INCLUDE_DSL_G997_STATUS"
++echo "  Include G997 alarm:               $INCLUDE_DSL_G997_ALARM"
++echo "  Include DSL Bonding:              $INCLUDE_DSL_BONDING"
++echo "  Include Misc Line Status          $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
++echo "  Include DELT:                     $INCLUDE_DSL_DELT"
++echo "  Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
++echo "  Include PM:                       $INCLUDE_DSL_PM"
++echo "  Include PM config:                $INCLUDE_DSL_CPE_PM_CONFIG"
++echo "  Include PM total:                 $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
++echo "  Include PM history:               $INCLUDE_DSL_CPE_PM_HISTORY"
++echo "  Include PM showtime:              $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
++echo "  Include PM optional:              $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
++echo "  Include PM line:                  $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
++echo "  Include PM line event showtime:   $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
++echo "  Include PM channel:               $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
++echo "  Include PM channel extended:      $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
++echo "  Include PM data path:             $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
++echo "  Include PM data path failure:     $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
++echo "  Include PM ReTx:                  $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
++echo "  Include PM line threshold:        $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
++echo "  Include PM channel threshold:     $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
++echo "  Include PM data path threshold:   $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
++echo "  Include PM ReTx threshold:        $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
++echo "  Include FW memory free support:   $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
++echo "----------------------- deprectated ! ----------------------------------"
++echo "  Include PM line failure:          $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
++echo ""
++echo " Settings:"
++echo "  Configure options:                $CONFIGURE_OPTIONS"
++echo "------------------------------------------------------------------------"
+ ])
+ 
+ AC_CONFIG_FILES([Makefile src/Makefile])
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -303,7 +303,7 @@
+ drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))"
+ 
+ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES)
+-	@echo -e "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
++	@echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
+ 	if test ! -e common/drv_dsl_cpe_api.c ; then \
+ 		echo "copy source files (as links only!)"; \
+ 		for f in $(filter %.c,$(drv_dsl_cpe_api_SOURCES)); do \
+@@ -311,10 +311,10 @@
+ 			cp -s $(addprefix @abs_srcdir@/,$$f) $(PWD)/`dirname $$f`/ ; \
+ 		done \
+ 	fi
+-	@echo -e "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
+-	@echo -e "obj-m := $(subst .ko,.o,$@)"			>> $(PWD)/Kbuild
+-	@echo -e "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)"	>> $(PWD)/Kbuild
+-	@echo -e "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
++	@echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
++	@echo "obj-m := $(subst .ko,.o,$@)"			>> $(PWD)/Kbuild
++	@echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)"	>> $(PWD)/Kbuild
++	@echo "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
+ 	$(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules
+ 
+ clean-generic:
+--- a/src/include/drv_dsl_cpe_os_linux.h
++++ b/src/include/drv_dsl_cpe_os_linux.h
+@@ -16,8 +16,6 @@
+    extern "C" {
+ #endif
+ 
+-#include <asm/ioctl.h>
+-#include <generated/autoconf.h>
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+@@ -26,8 +24,10 @@
+ #include <linux/spinlock.h>
+ #include <linux/sched.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-   #include <generated/utsrelease.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33))
++#include <linux/utsrelease.h>
++#else
++#include <generated/utsrelease.h>
+ #endif
+ 
+ #include <linux/types.h>
+@@ -39,7 +39,8 @@
+ #include <linux/delay.h>
+ #include <linux/poll.h>
+ #include <asm/uaccess.h>
+-#include <linux/smp_lock.h>
++//#include <linux/smp_lock.h>
++#include <asm/ioctl.h>
+ 
+ #ifdef INCLUDE_DSL_CPE_API_IFXOS_SUPPORT
+ /** IFXOS includes*/
diff --git a/package/platform/lantiq/ltq-adsl/patches/110-fix_status_polling_loop.patch b/package/platform/lantiq/ltq-adsl/patches/110-fix_status_polling_loop.patch
new file mode 100644
index 000000000..870943d95
--- /dev/null
+++ b/package/platform/lantiq/ltq-adsl/patches/110-fix_status_polling_loop.patch
@@ -0,0 +1,11 @@
+--- a/src/device/drv_dsl_cpe_device_danube.c
++++ b/src/device/drv_dsl_cpe_device_danube.c
+@@ -4069,7 +4069,7 @@ static DSL_Error_t DSL_DRV_DANUBE_XTUSys
+ 
+    DSL_CTX_WRITE(pContext, nErrCode, xtseCurr, xtseCurr);
+ 
+-   for (nRetry = 0; nRetry < 20; nRetry++)
++   for (nRetry = 0; nRetry < 20 && bStatusUpdated == DSL_FALSE; nRetry++)
+    {
+       /* Get STAT1 info*/
+       nErrCode = DSL_DRV_DANUBE_CmvRead(pContext, DSL_CMV_GROUP_STAT,
diff --git a/package/platform/lantiq/ltq-adsl/patches/120-platform.patch b/package/platform/lantiq/ltq-adsl/patches/120-platform.patch
new file mode 100644
index 000000000..48c7581e4
--- /dev/null
+++ b/package/platform/lantiq/ltq-adsl/patches/120-platform.patch
@@ -0,0 +1,72 @@
+Index: drv_dsl_cpe_api-3.24.4.4/src/common/drv_dsl_cpe_os_linux.c
+===================================================================
+--- drv_dsl_cpe_api-3.24.4.4.orig/src/common/drv_dsl_cpe_os_linux.c	2012-12-07 21:22:58.020256076 +0100
++++ drv_dsl_cpe_api-3.24.4.4/src/common/drv_dsl_cpe_os_linux.c	2012-12-07 21:31:13.156268489 +0100
+@@ -12,6 +12,7 @@
+ 
+ #define DSL_INTERN
+ #include <linux/device.h>
++#include <linux/platform_device.h>
+ 
+ #include "drv_dsl_cpe_api.h"
+ #include "drv_dsl_cpe_api_ioctl.h"
+@@ -1063,7 +1064,7 @@
+ #endif
+ 
+ /* Entry point of driver */
+-int __init DSL_ModuleInit(void)
++static int __devinit ltq_adsl_probe(struct platform_device *pdev)
+ {
+    struct class *dsl_class;
+    DSL_int_t i;
+@@ -1117,7 +1118,7 @@
+    return 0;
+ }
+ 
+-void __exit DSL_ModuleCleanup(void)
++static int __devexit ltq_adsl_remove(struct platform_device *pdev)
+ {
+    printk("Module will be unloaded"DSL_DRV_CRLF);
+ 
+@@ -1132,7 +1133,7 @@
+                (DSL_uint8_t**)&g_BndFpgaBase);
+ #endif /* defined(INCLUDE_DSL_CPE_API_VINAX) && defined(INCLUDE_DSL_BONDING)*/
+ 
+-   return;
++   return 0;
+ }
+ 
+ #ifndef _lint
+@@ -1148,8 +1149,30 @@
+ MODULE_PARM_DESC(debug_level, "set to get more (1) or fewer (4) debug outputs");
+ #endif /* #ifndef DSL_DEBUG_DISABLE*/
+ 
+-module_init(DSL_ModuleInit);
+-module_exit(DSL_ModuleCleanup);
++static const struct of_device_id ltq_adsl_match[] = {
++#ifdef CONFIG_DANUBE
++	{ .compatible = "lantiq,adsl-danube"},
++#elif defined CONFIG_AMAZON_SE
++	{ .compatible = "lantiq,adsl-ase"},
++#elif defined CONFIG_AR9
++	{ .compatible = "lantiq,adsl-arx100"},
++#endif
++	{},
++};
++MODULE_DEVICE_TABLE(of, ltq_adsl_match);
++
++static struct platform_driver ltq_adsl_driver = {
++	.probe = ltq_adsl_probe,
++	.remove = __devexit_p(ltq_adsl_remove),
++	.driver = {
++		.name = "adsl",
++		.owner = THIS_MODULE,
++		.of_match_table = ltq_adsl_match,
++	},
++};
++
++module_platform_driver(ltq_adsl_driver);
++
+ #endif /* #ifndef _lint*/
+ 
+ //EXPORT_SYMBOL(DSL_ModuleInit);