move a few unmaintained packages from trunk to /packages

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33634 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 105 deletions

diff --git a/package/madwifi/patches/383-ibss_hostap.patch b/package/madwifi/patches/383-ibss_hostap.patch
deleted file mode 100644
index d449c3037..000000000
--- a/package/madwifi/patches/383-ibss_hostap.patch
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/ath/if_ath.c
-+++ b/ath/if_ath.c
-@@ -1452,6 +1452,23 @@ ath_vap_create(struct ieee80211com *ic,
- 		sc->sc_nstavaps++;
- 	else if (opmode == IEEE80211_M_MONITOR)
- 		sc->sc_nmonvaps++;
-+
-+
-+	/* Driving the HAL in IBSS sometimes adapts the TSF and other timing registers
-+	 * from received beacons/probes. If that happens, expected TX interrupts may
-+	 * not occur until next reset. Which triggers the "lost beacon" tasklet.
-+	 * Resulting effectively in not sending packets for minutes. Because that only
-+	 * happens in large mesh networks, this mode needs to be activated by a kernel
-+	 * module parameter: hostap_for_ibss=1. Note that using this mode has side
-+	 * effects. Such as not supressing beacons/probe answers randomly when
-+	 * receiving other node beacons. It's recommended to lower the beacon interval
-+	 * then. When using an IBSS-VAP together with an HOSTAP-VAP, you may also need
-+	 * to re-trigger IBSS beacon generation after creating the HOSTAP-VAP by
-+	 * issueing "iwpriv athX bintval 1000".
-+	 */
-+	if ((flags & IEEE80211_NO_STABEACONS) && (ic->ic_opmode == IEEE80211_M_IBSS))
-+		sc->sc_opmode = HAL_M_HOSTAP;
-+	else
- 	/*
- 	 * Adhoc demo mode is a pseudo mode; to the HAL it's
- 	 * just IBSS mode and the driver doesn't use management
-@@ -4279,7 +4296,8 @@ ath_calcrxfilter(struct ath_softc *sc)
- 	if (ic->ic_opmode != IEEE80211_M_HOSTAP && (dev->flags & IFF_PROMISC))
- 		rfilt |= HAL_RX_FILTER_PROM;
- 	if (ic->ic_opmode == IEEE80211_M_STA ||
--	    sc->sc_opmode == HAL_M_IBSS ||	/* NB: AHDEMO too */
-+	    ic->ic_opmode == IEEE80211_M_IBSS ||
-+	    ic->ic_opmode == IEEE80211_M_AHDEMO ||
- 	    (sc->sc_nostabeacons) || sc->sc_scanning ||
- 		(ic->ic_opmode == IEEE80211_M_HOSTAP))
- 		rfilt |= HAL_RX_FILTER_BEACON;
-@@ -6435,6 +6453,33 @@ ath_capture(struct net_device *dev, cons
- }
- 
- /*
-+ * Advances (forwards/adds) a microsecond value to current chip's TSF registers
-+ */
-+
-+/* from ath_info.c */
-+#define AR5K_TSF_L32_5210		0x806c	/* TSF (lower 32 bits) */
-+#define AR5K_TSF_L32_5211		0x804c
-+#define AR5K_TSF_L32			(ar_device(ah->ah_sc->devid) == 5210 ? \
-+					AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
-+
-+#define AR5K_TSF_U32_5210		0x8070
-+#define AR5K_TSF_U32_5211		0x8050
-+#define AR5K_TSF_U32			(ar_device(ah->ah_sc->devid) == 5210 ? \
-+					AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
-+
-+static inline void ath_hal_settsf64(struct ath_hal *ah, u_int64_t tsf_adv)
-+{
-+	ATH_HAL_LOCK_IRQ(ah->ah_sc);
-+	ath_hal_set_function(__func__);
-+	tsf_adv += ah->ah_getTsf64(ah);
-+	OS_REG_WRITE(ah, AR5K_TSF_L32, 0ll);
-+	OS_REG_WRITE(ah, AR5K_TSF_U32, (tsf_adv >> 32) & 0xffffffffll);
-+	OS_REG_WRITE(ah, AR5K_TSF_L32, (tsf_adv >> 00) & 0xffffffffll);
-+	ath_hal_set_function(NULL);
-+	ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
-+}
-+
-+/*
-  * Intercept management frames to collect beacon RSSI data and to do
-  * ibss merges. This function is called for all management frames,
-  * including those belonging to other BSS.
-@@ -6487,10 +6532,19 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- 			DPRINTF(sc, ATH_DEBUG_BEACON, 
- 				"Updated beacon timers\n");
- 		}
--		if ((sc->sc_opmode == HAL_M_IBSS) &&
--				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
--				ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) {
--			DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
-+		if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
-+				(sc->sc_opmode == HAL_M_HOSTAP) &&
-+				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
-+			/* In this mode, we drive the HAL in HOSTAP mode. Hence
-+			 * we do the IBSS merging in software. Also do not merge
-+			 * if the difference it too small. Otherwise we are playing
-+			 * tsf-pingpong with other vendors drivers */
-+			beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
-+			if (beacon_tsf > rtsf + 0xffff) {
-+				ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
-+				ieee80211_ibss_merge(ni);
-+			}
-+			break;
- 		}
- 		/* NB: Fall Through */
- 	case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
-@@ -6563,6 +6617,10 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- #endif
- 			if (do_merge)
- 				ieee80211_ibss_merge(ni);
-+
-+			if ((sc->sc_opmode == HAL_M_IBSS) &&
-+					ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
-+				DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
- 		}
- 		break;
- 	}