hostapd: use patches to add the nl80211 driver instead of copying the files.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10475 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 242 deletions

diff --git a/package/hostapd/files/radiotap.h b/package/hostapd/files/radiotap.h
deleted file mode 100644
index 508264c4c..000000000
--- a/package/hostapd/files/radiotap.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
-/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */
-
-/*-
- * Copyright (c) 2003, 2004 David Young.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of David Young may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
- * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-
-/*
- * Modifications to fit into the linux IEEE 802.11 stack,
- * Mike Kershaw (dragorn@kismetwireless.net)
- */
-
-#ifndef IEEE80211RADIOTAP_H
-#define IEEE80211RADIOTAP_H
-
-#include <stdint.h>
-
-/* Base version of the radiotap packet header data */
-#define PKTHDR_RADIOTAP_VERSION		0
-
-/* A generic radio capture format is desirable. There is one for
- * Linux, but it is neither rigidly defined (there were not even
- * units given for some fields) nor easily extensible.
- *
- * I suggest the following extensible radio capture format. It is
- * based on a bitmap indicating which fields are present.
- *
- * I am trying to describe precisely what the application programmer
- * should expect in the following, and for that reason I tell the
- * units and origin of each measurement (where it applies), or else I
- * use sufficiently weaselly language ("is a monotonically nondecreasing
- * function of...") that I cannot set false expectations for lawyerly
- * readers.
- */
-
-/* The radio capture header precedes the 802.11 header.
- * All data in the header is little endian on all platforms.
- */
-struct ieee80211_radiotap_header {
-	uint8_t it_version;	/* Version 0. Only increases
-				 * for drastic changes,
-				 * introduction of compatible
-				 * new fields does not count.
-				 */
-	uint8_t it_pad;
-	uint16_t it_len;	/* length of the whole
-				 * header in bytes, including
-				 * it_version, it_pad,
-				 * it_len, and data fields.
-				 */
-	uint32_t it_present;	/* A bitmap telling which
-				 * fields are present. Set bit 31
-				 * (0x80000000) to extend the
-				 * bitmap by another 32 bits.
-				 * Additional extensions are made
-				 * by setting bit 31.
-				 */
-};
-
-/* Name                                 Data type    Units
- * ----                                 ---------    -----
- *
- * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
- *
- *      Value in microseconds of the MAC's 64-bit 802.11 Time
- *      Synchronization Function timer when the first bit of the
- *      MPDU arrived at the MAC. For received frames, only.
- *
- * IEEE80211_RADIOTAP_CHANNEL           2 x uint16_t   MHz, bitmap
- *
- *      Tx/Rx frequency in MHz, followed by flags (see below).
- *
- * IEEE80211_RADIOTAP_FHSS              uint16_t       see below
- *
- *      For frequency-hopping radios, the hop set (first byte)
- *      and pattern (second byte).
- *
- * IEEE80211_RADIOTAP_RATE              u8           500kb/s
- *
- *      Tx/Rx data rate
- *
- * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF signal power at the antenna, decibel difference from
- *      one milliwatt.
- *
- * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF noise power at the antenna, decibel difference from one
- *      milliwatt.
- *
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
- *
- *      RF signal power at the antenna, decibel difference from an
- *      arbitrary, fixed reference.
- *
- * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
- *
- *      RF noise power at the antenna, decibel difference from an
- *      arbitrary, fixed reference point.
- *
- * IEEE80211_RADIOTAP_LOCK_QUALITY      uint16_t       unitless
- *
- *      Quality of Barker code lock. Unitless. Monotonically
- *      nondecreasing with "better" lock strength. Called "Signal
- *      Quality" in datasheets.  (Is there a standard way to measure
- *      this?)
- *
- * IEEE80211_RADIOTAP_TX_ATTENUATION    uint16_t       unitless
- *
- *      Transmit power expressed as unitless distance from max
- *      power set at factory calibration.  0 is max power.
- *      Monotonically nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t       decibels (dB)
- *
- *      Transmit power expressed as decibel distance from max power
- *      set at factory calibration.  0 is max power.  Monotonically
- *      nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      Transmit power expressed as dBm (decibels from a 1 milliwatt
- *      reference). This is the absolute power level measured at
- *      the antenna port.
- *
- * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
- *
- *      Properties of transmitted and received frames. See flags
- *      defined below.
- *
- * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
- *
- *      Unitless indication of the Rx/Tx antenna for this packet.
- *      The first antenna is antenna 0.
- *
- * IEEE80211_RADIOTAP_RX_FLAGS          uint16_t       bitmap
- *
- *     Properties of received frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_TX_FLAGS          uint16_t       bitmap
- *
- *     Properties of transmitted frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
- *
- *     Number of rts retries a transmitted frame used.
- *
- * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
- *
- *     Number of unicast retries a transmitted frame used.
- *
- */
-enum ieee80211_radiotap_type {
-	IEEE80211_RADIOTAP_TSFT = 0,
-	IEEE80211_RADIOTAP_FLAGS = 1,
-	IEEE80211_RADIOTAP_RATE = 2,
-	IEEE80211_RADIOTAP_CHANNEL = 3,
-	IEEE80211_RADIOTAP_FHSS = 4,
-	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
-	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
-	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
-	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
-	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
-	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
-	IEEE80211_RADIOTAP_ANTENNA = 11,
-	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
-	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
-	IEEE80211_RADIOTAP_RX_FLAGS = 14,
-	IEEE80211_RADIOTAP_TX_FLAGS = 15,
-	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
-	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
-	IEEE80211_RADIOTAP_EXT = 31
-};
-
-/* Channel flags. */
-#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
-#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
-#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
-#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
-#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
-#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
-#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
-#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
-
-/* For IEEE80211_RADIOTAP_FLAGS */
-#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
-						 * during CFP
-						 */
-#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
-						 * with short
-						 * preamble
-						 */
-#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
-						 * with WEP encryption
-						 */
-#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
-						 * with fragmentation
-						 */
-#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
-#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
-						 * 802.11 header and payload
-						 * (to 32-bit boundary)
-						 */
-/* For IEEE80211_RADIOTAP_RX_FLAGS */
-#define IEEE80211_RADIOTAP_F_RX_BADFCS	0x0001	/* frame failed crc check */
-
-/* For IEEE80211_RADIOTAP_TX_FLAGS */
-#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
-						 * retries */
-#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
-#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
-
-#endif				/* IEEE80211_RADIOTAP_H */