[package] busybox: update to v1.12.4 (partially closes: #4279)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16053 3c298f89-4303-0410-b956-a3cf2f4a3e73

19 files changed, 416 insertions, 337 deletions

diff --git a/package/busybox/config/Config.in b/package/busybox/config/Config.in
index 62b80d6e3..73e879255 100644
--- a/package/busybox/config/Config.in
+++ b/package/busybox/config/Config.in
@@ -20,6 +20,15 @@ config BUSYBOX_CONFIG_DESKTOP
 	  Select this only if you plan to use busybox on full-blown
 	  desktop machine with common Linux distro, not on an embedded box.
 
+config BUSYBOX_CONFIG_EXTRA_COMPAT
+	bool "Provide compatible behavior for rare corner cases (bigger code)"
+	default n
+	help
+	  This option makes grep, sed etc handle rare corner cases
+	  (embedded NUL bytes and such). This makes code bigger and uses
+	  some GNU extensions in libc. You probably only need this option
+	  if you plan to run busybox on desktop.
+
 config BUSYBOX_CONFIG_FEATURE_ASSUME_UNICODE
 	bool "Assume that 1:1 char/glyph correspondence is not true"
 	default n
@@ -39,7 +48,7 @@ choice
 	  There are 3 ways BusyBox can handle buffer allocations:
 	  - Use malloc. This costs code size for the call to xmalloc.
 	  - Put them on stack. For some very small machines with limited stack
-	    space, this can be deadly.  For most folks, this works just fine.
+	    space, this can be deadly. For most folks, this works just fine.
 	  - Put them in BSS. This works beautifully for computers with a real
 	    MMU (and OS support), but wastes runtime RAM for uCLinux. This
 	    behavior was the only one available for BusyBox versions 0.48 and
@@ -71,8 +80,8 @@ config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE
 	select BUSYBOX_CONFIG_SHOW_USAGE
 	help
 	  All BusyBox applets will show more verbose help messages when
-	  busybox is invoked with --help.  This will add a lot of text to the
-	  busybox binary.  In the default configuration, this will add about
+	  busybox is invoked with --help. This will add a lot of text to the
+	  busybox binary. In the default configuration, this will add about
 	  13k, but it can add much more depending on your configuration.
 
 config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE
@@ -85,15 +94,15 @@ config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE
 
 	  If you have a really tiny busybox with few applets enabled (and
 	  bunzip2 isn't one of them), the overhead of the decompressor might
-	  be noticeable.  Also, if you run executables directly from ROM
-	  and have very little memory, this might not be a win.  Otherwise,
+	  be noticeable. Also, if you run executables directly from ROM
+	  and have very little memory, this might not be a win. Otherwise,
 	  you probably want this.
 
 config BUSYBOX_CONFIG_FEATURE_INSTALLER
 	bool "Support --install [-s] to install applet links at runtime"
 	default n
 	help
-	  Enable 'busybox --install [-s]' support.  This will allow you to use
+	  Enable 'busybox --install [-s]' support. This will allow you to use
 	  busybox at runtime to create hard links or symlinks for all the
 	  applets that are compiled into busybox.
 
@@ -117,7 +126,7 @@ config BUSYBOX_CONFIG_FEATURE_DEVPTS
 	help
 	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
 	  busybox will use /dev/ptmx for the master side of the pseudoterminal
-	  and /dev/pts/<number> for the slave side.  Otherwise, BSD style
+	  and /dev/pts/<number> for the slave side. Otherwise, BSD style
 	  /dev/ttyp<number> will be used. To use this option, you should have
 	  devpts mounted.
 
@@ -126,7 +135,7 @@ config BUSYBOX_CONFIG_FEATURE_CLEAN_UP
 	default n
 	help
 	  As a size optimization, busybox normally exits without explicitly
-	  freeing dynamically allocated memory or closing files.  This saves
+	  freeing dynamically allocated memory or closing files. This saves
 	  space since the OS will clean up for us, but it can confuse debuggers
 	  like valgrind, which report tons of memory and resource leaks.
 
@@ -151,7 +160,7 @@ config BUSYBOX_CONFIG_FEATURE_SUID
 	  If you're really paranoid and don't want to do this, build two
 	  busybox binaries with different applets in them (and the appropriate
 	  symlinks pointing to each binary), and only set the suid bit on the
-	  one that needs it.  The applets currently marked to need the suid bit
+	  one that needs it. The applets currently marked to need the suid bit
 	  are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
 	  and vlock.
 
@@ -161,7 +170,7 @@ config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
 	depends on BUSYBOX_CONFIG_FEATURE_SUID
 	help
 	  Allow the SUID / SGID state of an applet to be determined at runtime
-	  by checking /etc/busybox.conf.  (This is sort of a poor man's sudo.)
+	  by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
 	  The format of this file is as follows:
 
 	  <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
@@ -169,11 +178,12 @@ config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
 	  An example might help:
 
 	  [SUID]
-	  su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+	  su = ssx root.0 # applet su can be run by anyone and runs with
+	                  # euid=0/egid=0
 	  su = ssx        # exactly the same
 
-	  mount = sx- root.disk # applet mount can be run by root and members of group disk
-	                        # and runs with euid=0
+	  mount = sx- root.disk # applet mount can be run by root and members
+	                        # of group disk and runs with euid=0
 
 	  cp = --- # disable applet cp for everyone
 
@@ -192,14 +202,15 @@ config BUSYBOX_CONFIG_FEATURE_SUID_CONFIG_QUIET
 	default n
 	depends on BUSYBOX_CONFIG_FEATURE_SUID_CONFIG
 	help
-	  /etc/busybox.conf should be readable by the user needing the SUID, check
-	  this option to avoid users to be notified about missing permissions.
+	  /etc/busybox.conf should be readable by the user needing the SUID,
+	  check this option to avoid users to be notified about missing
+	  permissions.
 
 config BUSYBOX_CONFIG_SELINUX
 	bool "Support NSA Security Enhanced Linux"
 	default n
 	help
-	  Enable support for SELinux in applets ls, ps, and id.  Also provide
+	  Enable support for SELinux in applets ls, ps, and id. Also provide
 	  the option of compiling in SELinux applets.
 
 	  If you do not have a complete SELinux userland installed, this stuff
@@ -234,9 +245,9 @@ config BUSYBOX_CONFIG_BUSYBOX_EXEC_PATH
 	default "/proc/self/exe"
 	help
 	  When Busybox applets need to run other busybox applets, BusyBox
-	  sometimes needs to exec() itself.  When the /proc filesystem is
+	  sometimes needs to exec() itself. When the /proc filesystem is
 	  mounted, /proc/self/exe always points to the currently running
-	  executable.  If you haven't got /proc, set this to wherever you
+	  executable. If you haven't got /proc, set this to wherever you
 	  want to run BusyBox from.
 
 # These are auto-selected by other options
@@ -303,7 +314,7 @@ config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
 	  busybox code.
 
 	  This feature allows every applet to be built as a tiny
-	  separate executable.  Enabling it for "one big busybox binary"
+	  separate executable. Enabling it for "one big busybox binary"
 	  approach serves no purpose and increases code size.
 	  You should almost certainly say "no" to this.
 
@@ -320,7 +331,7 @@ config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
 ###	  standalone application which uses libbusybox say 'Y'.
 ###
 ###	  Note: libbusybox is GPL, not LGPL, and exports no stable API that
-###	  might act as a copyright barrier.  We can and will modify the
+###	  might act as a copyright barrier. We can and will modify the
 ###	  exported function set between releases (even minor version number
 ###	  changes), and happily break out-of-tree features.
 ###
@@ -329,7 +340,7 @@ config BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
 config BUSYBOX_CONFIG_FEATURE_INDIVIDUAL
 	bool "Produce a binary for each applet, linked against libbusybox"
 	default n
-	depends on !BUSYBOX_CONFIG_STATIC && BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
 	help
 	  If your CPU architecture doesn't allow for sharing text/rodata
 	  sections of running binaries, but allows for runtime dynamic
@@ -347,7 +358,7 @@ config BUSYBOX_CONFIG_FEATURE_INDIVIDUAL
 config BUSYBOX_CONFIG_FEATURE_SHARED_BUSYBOX
 	bool "Produce additional busybox binary linked against libbusybox"
 	default n
-	depends on !BUSYBOX_CONFIG_STATIC && BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
+	depends on BUSYBOX_CONFIG_BUILD_LIBBUSYBOX
 	help
 	  Build busybox, dynamically linked against libbusybox.so.N.N.N.
 
@@ -378,11 +389,11 @@ config BUSYBOX_CONFIG_LFS
 	select BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
 	help
 	  If you want to build BusyBox with large file support, then enable
-	  this option.  This will have no effect if your kernel or your C
-	  library lacks large file support for large files.  Some of the
+	  this option. This will have no effect if your kernel or your C
+	  library lacks large file support for large files. Some of the
 	  programs that can benefit from large file support include dd, gzip,
-	  cp, mount, tar, and many others.  If you want to access files larger
-	  than 2 Gigabytes, enable this option.  Otherwise, leave it set to 'N'.
+	  cp, mount, tar, and many others. If you want to access files larger
+	  than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
 
 config BUSYBOX_CONFIG_CROSS_COMPILER_PREFIX
 	string "Cross Compiler prefix"
@@ -403,20 +414,20 @@ config BUSYBOX_CONFIG_DEBUG
 	default n
 	help
 	  Say Y here if you wish to examine BusyBox internals while applets are
-	  running.  This increases the size of the binary considerably, and
-	  should only be used when doing development.  If you are doing
+	  running. This increases the size of the binary considerably, and
+	  should only be used when doing development. If you are doing
 	  development and want to debug BusyBox, answer Y.
 
 	  Most people should answer N.
 
 config BUSYBOX_CONFIG_DEBUG_PESSIMIZE
-	bool "Disable compiler optimizations."
+	bool "Disable compiler optimizations"
 	default n
 	depends on BUSYBOX_CONFIG_DEBUG
 	help
 	  The compiler's optimization of source code can eliminate and reorder
 	  code, resulting in an executable that's hard to understand when
-	  stepping through it with a debugger.  This switches it off, resulting
+	  stepping through it with a debugger. This switches it off, resulting
 	  in a much bigger executable that more closely matches the source
 	  code.
 
@@ -433,27 +444,28 @@ choice
 	default BUSYBOX_CONFIG_NO_DEBUG_LIB
 	help
 	  Using an additional debugging library will make BusyBox become
-	  considerable larger and will cause it to run more slowly.  You
+	  considerable larger and will cause it to run more slowly. You
 	  should always leave this option disabled for production use.
 
 	  dmalloc support:
 	  ----------------
 	  This enables compiling with dmalloc ( http://dmalloc.com/ )
 	  which is an excellent public domain mem leak and malloc problem
-	  detector.  To enable dmalloc, before running busybox you will
+	  detector. To enable dmalloc, before running busybox you will
 	  want to properly set your environment, for example:
 	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
 	  The 'debug=' value is generated using the following command
-	    dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
-	       -p check-fence -p check-heap -p check-lists -p check-blank \
-	       -p check-funcs -p realloc-copy -p allow-free-null
+	    dmalloc -p log-stats -p log-non-free -p log-bad-space \
+	       -p log-elapsed-time -p check-fence -p check-heap \
+	       -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+	       -p allow-free-null
 
 	  Electric-fence support:
 	  -----------------------
-	  This enables compiling with Electric-fence support.  Electric
+	  This enables compiling with Electric-fence support. Electric
 	  fence is another very useful malloc debugging library which uses
 	  your computer's virtual memory hardware to detect illegal memory
-	  accesses.  This support will make BusyBox be considerable larger
+	  accesses. This support will make BusyBox be considerable larger
 	  and run slower, so you should leave this option disabled unless
 	  you are hunting a hard to find memory problem.
 
@@ -475,9 +487,12 @@ config BUSYBOX_CONFIG_INCLUDE_SUSv2
 	help
 	  This option will enable backwards compatibility with SuSv2,
 	  specifically, old-style numeric options ('command -1 <file>')
-	  will be supported in head, tail, and fold.  (Note: should
+	  will be supported in head, tail, and fold. (Note: should
 	  affect renice too.)
 
+config BUSYBOX_CONFIG_PARSE
+	bool "Uniform config file parser debugging applet: parse"
+
 endmenu
 
 menu 'Installation Options'
@@ -505,8 +520,8 @@ config BUSYBOX_CONFIG_INSTALL_APPLET_SYMLINKS
 config BUSYBOX_CONFIG_INSTALL_APPLET_HARDLINKS
 	bool "as hard-links"
 	help
-	  Install applets as hard-links to the busybox binary. This might count
-	  on a filesystem with few inodes.
+	  Install applets as hard-links to the busybox binary. This might
+	  count on a filesystem with few inodes.
 
 config BUSYBOX_CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS
 	bool "as script wrappers"
@@ -542,7 +557,8 @@ config BUSYBOX_CONFIG_INSTALL_SH_APPLET_HARDLINK
 config BUSYBOX_CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER
 	bool "as script wrapper"
 	help
-	  Install /bin/sh applet as script wrapper that call the busybox binary.
+	  Install /bin/sh applet as script wrapper that call the busybox
+	  binary.
 
 endchoice
 
diff --git a/package/busybox/config/archival/Config.in b/package/busybox/config/archival/Config.in
index d6120b7b2..3fd0fb96b 100644
--- a/package/busybox/config/archival/Config.in
+++ b/package/busybox/config/archival/Config.in
@@ -5,12 +5,36 @@
 
 menu "Archival Utilities"
 
+config BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA
+	bool "Make tar, rpm, modprobe etc understand .lzma data"
+	default n
+	help
+	  Make tar, rpm, modprobe etc understand .lzma data.
+
+config BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2
+	bool "Make tar, rpm, modprobe etc understand .bz2 data"
+	default y
+	help
+	  Make tar, rpm, modprobe etc understand .bz2 data.
+
+config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
+	bool "Make tar, rpm, modprobe etc understand .gz data"
+	default y
+	help
+	  Make tar, rpm, modprobe etc understand .gz data.
+
+config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z
+	bool "Make tar and gunzip understand .Z data"
+	default n
+	help
+	  Make tar and gunzip understand .Z data.
+
 config BUSYBOX_CONFIG_AR
 	bool "ar"
 	default n
 	help
 	  ar is an archival utility program used to create, modify, and
-	  extract contents from archives.  An archive is a single file holding
+	  extract contents from archives. An archive is a single file holding
 	  a collection of other files in a structure that makes it possible to
 	  retrieve the original individual files (called archive members).
 	  The original files' contents, mode (permissions), timestamp, owner,
@@ -33,8 +57,8 @@ config BUSYBOX_CONFIG_FEATURE_AR_LONG_FILENAMES
 	default n
 	depends on BUSYBOX_CONFIG_AR
 	help
-	  By default the ar format can only store the first 15 characters of the
-	  filename, this option removes that limitation.
+	  By default the ar format can only store the first 15 characters of
+	  the filename, this option removes that limitation.
 	  It supports the GNU ar long filename method which moves multiple long
 	  filenames into a the data section of a new ar entry.
 
@@ -43,7 +67,7 @@ config BUSYBOX_CONFIG_BUNZIP2
 	default y
 	help
 	  bunzip2 is a compression utility using the Burrows-Wheeler block
-	  sorting text compression algorithm, and Huffman coding.  Compression
+	  sorting text compression algorithm, and Huffman coding. Compression
 	  is generally considerably better than that achieved by more
 	  conventional LZ77/LZ78-based compressors, and approaches the
 	  performance of the PPM family of statistical compressors.
@@ -53,10 +77,10 @@ config BUSYBOX_CONFIG_BUNZIP2
 
 config BUSYBOX_CONFIG_BZIP2
 	bool "bzip2"
-	default n
+	default y
 	help
 	  bzip2 is a compression utility using the Burrows-Wheeler block
-	  sorting text compression algorithm, and Huffman coding.  Compression
+	  sorting text compression algorithm, and Huffman coding. Compression
 	  is generally considerably better than that achieved by more
 	  conventional LZ77/LZ78-based compressors, and approaches the
 	  performance of the PPM family of statistical compressors.
@@ -68,15 +92,15 @@ config BUSYBOX_CONFIG_CPIO
 	bool "cpio"
 	default n
 	help
-	  cpio is an archival utility program used to create, modify, and extract
-	  contents from archives.
+	  cpio is an archival utility program used to create, modify, and
+	  extract contents from archives.
 	  cpio has 110 bytes of overheads for every stored file.
 
 	  This implementation of cpio can extract cpio archives created in the
 	  "newc" or "crc" format, it cannot create or modify them.
 
-	  Unless you have a specific application which requires cpio, you should
-	  probably say N here.
+	  Unless you have a specific application which requires cpio, you
+	  should probably say N here.
 
 config BUSYBOX_CONFIG_FEATURE_CPIO_O
 	bool "Support for archive creation"
@@ -90,30 +114,33 @@ config BUSYBOX_CONFIG_DPKG
 	bool "dpkg"
 	default n
 	help
-	  dpkg is a medium-level tool to install, build, remove and manage Debian packages.
+	  dpkg is a medium-level tool to install, build, remove and manage
+	  Debian packages.
 
-	  This implementation of dpkg has a number of limitations, you should use the
-	  official dpkg if possible.
+	  This implementation of dpkg has a number of limitations,
+	  you should use the official dpkg if possible.
 
 config BUSYBOX_CONFIG_DPKG_DEB
 	bool "dpkg_deb"
 	default n
 	help
-	  dpkg-deb packs, unpacks and provides information about Debian archives.
+	  dpkg-deb packs, unpacks and provides information about Debian
+	  archives.
 
 	  This implementation of dpkg-deb cannot pack archives.
 
-	  Unless you have a specific application which requires dpkg-deb, you should
-	  probably say N here.
+	  Unless you have a specific application which requires dpkg-deb,
+	  say N here.
 
 config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY
 	bool "Extract only (-x)"
 	default n
 	depends on BUSYBOX_CONFIG_DPKG_DEB
 	help
-	  This reduces dpkg-deb to the equivalent of "ar -p <deb> data.tar.gz | tar -zx".
-	  However it saves space as none of the extra dpkg-deb, ar or tar options are
-	  needed, they are linked to internally.
+	  This reduces dpkg-deb to the equivalent of
+	  "ar -p <deb> data.tar.gz | tar -zx". However it saves space as none
+	  of the extra dpkg-deb, ar or tar options are needed, they are linked
+	  to internally.
 
 config BUSYBOX_CONFIG_GUNZIP
 	bool "gunzip"
@@ -123,15 +150,6 @@ config BUSYBOX_CONFIG_GUNZIP
 	  You can use the `-t' option to test the integrity of
 	  an archive, without decompressing it.
 
-config BUSYBOX_CONFIG_FEATURE_GUNZIP_UNCOMPRESS
-	bool "Uncompress support"
-	default y
-	depends on BUSYBOX_CONFIG_GUNZIP
-	help
-	  Enable if you want gunzip to have the ability to decompress
-	  archives created by the program compress (not much
-	  used anymore).
-
 config BUSYBOX_CONFIG_GZIP
 	bool "gzip"
 	default y
@@ -151,13 +169,6 @@ config BUSYBOX_CONFIG_RPM
 	help
 	  Mini RPM applet - queries and extracts RPM packages.
 
-config BUSYBOX_CONFIG_FEATURE_RPM_BZ2
-	bool "Enable handling of rpms with bzip2-compressed data inside"
-	default n
-	depends on BUSYBOX_CONFIG_RPM
-	help
-	  Enable handling of rpms with bzip2-compressed data inside.
-
 config BUSYBOX_CONFIG_TAR
 	bool "tar"
 	default y
@@ -166,6 +177,8 @@ config BUSYBOX_CONFIG_TAR
 	  create compressed archives. It's probably the most widely used
 	  UNIX archive program.
 
+if TAR
+
 config BUSYBOX_CONFIG_FEATURE_TAR_CREATE
 	bool "Enable archive creation"
 	default y
@@ -174,45 +187,13 @@ config BUSYBOX_CONFIG_FEATURE_TAR_CREATE
 	  If you enable this option you'll be able to create
 	  tar archives using the `-c' option.
 
-config BUSYBOX_CONFIG_FEATURE_TAR_GZIP
-	bool "Enable -z option"
-	default y
-	depends on BUSYBOX_CONFIG_TAR
-	help
-	  If you enable this option tar will be able to call gzip,
-	  when creating or extracting tar gziped archives.
-
-config BUSYBOX_CONFIG_FEATURE_TAR_BZIP2
-	bool "Enable -j option to handle .tar.bz2 files"
-	default y
-	depends on BUSYBOX_CONFIG_TAR
-	help
-	  If you enable this option you'll be able to extract
-	  archives compressed with bzip2.
-
-config BUSYBOX_CONFIG_FEATURE_TAR_LZMA
-	bool "Enable -a option to handle .tar.lzma files"
-	default n
-	depends on BUSYBOX_CONFIG_TAR
-	help
-	  If you enable this option you'll be able to extract
-	  archives compressed with lzma.
-
-config BUSYBOX_CONFIG_FEATURE_TAR_COMPRESS
-	bool "Enable -Z option"
-	default n
-	depends on BUSYBOX_CONFIG_TAR
-	help
-	  If you enable this option tar will be able to call uncompress,
-	  when extracting .tar.Z archives.
-
 config BUSYBOX_CONFIG_FEATURE_TAR_AUTODETECT
-	bool "Let tar autodetect gz/bz2 compresses tarballs"
+	bool "Autodetect gz/bz2 compressed tarballs"
 	default n
-	depends on BUSYBOX_CONFIG_FEATURE_TAR_GZIP || BUSYBOX_CONFIG_FEATURE_TAR_BZIP2
+	depends on BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z || BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ || BUSYBOX_CONFIG_FEATURE_SEAMLESS_BZ2 || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA
 	help
 	  With this option tar can automatically detect gzip/bzip2 compressed
-	  tarballs. Currently it works only on seekable streams.
+	  tarballs. Currently it works only on files (not pipes etc).
 
 config BUSYBOX_CONFIG_FEATURE_TAR_FROM
 	bool "Enable -X (exclude from) and -T (include from) options)"
@@ -237,8 +218,9 @@ config BUSYBOX_CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY
 	depends on BUSYBOX_CONFIG_TAR
 	help
 	  This option is required to unpack archives created by some old
-	  version of Sun's tar (it was calculating checksum using signed arithmetic).
-	  It is said to be fixed in newer Sun tar, but "old" tarballs still exist.
+	  version of Sun's tar (it was calculating checksum using signed
+	  arithmetic). It is said to be fixed in newer Sun tar, but "old"
+	  tarballs still exist.
 
 config BUSYBOX_CONFIG_FEATURE_TAR_GNU_EXTENSIONS
 	bool "Support for GNU tar extensions (long filenames)"
@@ -264,6 +246,8 @@ config BUSYBOX_CONFIG_FEATURE_TAR_UNAME_GNAME
 	  listings (-t) and preserving permissions when unpacking (-p).
 	  +200 bytes.
 
+endif #tar
+
 config BUSYBOX_CONFIG_UNCOMPRESS
 	bool "uncompress"
 	default n
@@ -276,7 +260,7 @@ config BUSYBOX_CONFIG_UNLZMA
 	default n
 	help
 	  unlzma is a compression utility using the Lempel-Ziv-Markov chain
-	  compression algorithm, and range coding.  Compression
+	  compression algorithm, and range coding. Compression
 	  is generally considerably better than that achieved by the bzip2
 	  compressors.
 
@@ -304,41 +288,4 @@ config BUSYBOX_CONFIG_UNZIP
 	  current directory. Use the `-d' option to extract to a
 	  directory of your choice.
 
-comment "Common options for cpio and tar"
-	depends on BUSYBOX_CONFIG_CPIO || BUSYBOX_CONFIG_TAR
-
-comment "Common options for dpkg and dpkg_deb"
-	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
-
-config BUSYBOX_CONFIG_FEATURE_DEB_TAR_GZ
-	bool "gzip debian packages (normal)"
-	default n if BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
-	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
-	help
-	  This is the default compression method inside the debian ar file.
-
-	  If you want compatibility with standard .deb's you should say yes here.
-
-config BUSYBOX_CONFIG_FEATURE_DEB_TAR_BZ2
-	bool "bzip2 debian packages"
-	default n
-	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
-	help
-	  This allows dpkg and dpkg-deb to extract deb's that are compressed internally
-	  with bzip2 instead of gzip.
-
-	  You only want this if you are creating your own custom debian packages that
-	  use an internal control.tar.bz2 or data.tar.bz2.
-
-config BUSYBOX_CONFIG_FEATURE_DEB_TAR_LZMA
-	bool "lzma debian packages"
-	default n
-	depends on BUSYBOX_CONFIG_DPKG || BUSYBOX_CONFIG_DPKG_DEB
-	help
-	  This allows dpkg and dpkg-deb to extract deb's that are compressed
-	  internally with lzma instead of gzip.
-
-	  You only want this if you are creating your own custom debian
-	  packages that use an internal control.tar.lzma or data.tar.lzma.
-
 endmenu
diff --git a/package/busybox/config/console-tools/Config.in b/package/busybox/config/console-tools/Config.in
index 7f0764fbf..02fcef49f 100644
--- a/package/busybox/config/console-tools/Config.in
+++ b/package/busybox/config/console-tools/Config.in
@@ -95,6 +95,12 @@ config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
 	help
 	  Support long options for the setconsole applet.
 
+config BUSYBOX_CONFIG_SETFONT
+	bool "setfont"
+	default n
+	help
+	  Allows to load console screen map. Useful for i18n.
+
 config BUSYBOX_CONFIG_SETKEYCODES
 	bool "setkeycodes"
 	default n
@@ -108,4 +114,10 @@ config BUSYBOX_CONFIG_SETLOGCONS
 	help
 	  This program redirects the output console of kernel messages.
 
+config BUSYBOX_CONFIG_SHOWKEY
+	bool "showkey"
+	default n
+	help
+	  Shows keys pressed.
+
 endmenu
diff --git a/package/busybox/config/coreutils/Config.in b/package/busybox/config/coreutils/Config.in
index 53fb74a79..93f10e38b 100644
--- a/package/busybox/config/coreutils/Config.in
+++ b/package/busybox/config/coreutils/Config.in
@@ -10,7 +10,7 @@ config BUSYBOX_CONFIG_BASENAME
 	default y
 	help
 	  basename is used to strip the directory and suffix from filenames,
-	  leaving just the filename itself.  Enable this option if you wish
+	  leaving just the filename itself. Enable this option if you wish
 	  to enable the 'basename' utility.
 
 config BUSYBOX_CONFIG_CAL
@@ -24,7 +24,7 @@ config BUSYBOX_CONFIG_CAT
 	default y
 	help
 	  cat is used to concatenate files and print them to the standard
-	  output.  Enable this option if you wish to enable the 'cat' utility.
+	  output. Enable this option if you wish to enable the 'cat' utility.
 
 config BUSYBOX_CONFIG_CATV
 	bool "catv"
@@ -117,7 +117,8 @@ config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
 	  print to standard error the number of records read and written
 	  so far, then to resume copying.
 
-	  $ dd if=/dev/zero of=/dev/null& pid=$! $ kill -USR1 $pid; sleep 1; kill $pid
+	  $ dd if=/dev/zero of=/dev/null&
+	  $ pid=$! kill -USR1 $pid; sleep 1; kill $pid
 	  10899206+0 records in 10899206+0 records out
 
 config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
@@ -232,7 +233,7 @@ config BUSYBOX_CONFIG_EXPR_MATH_SUPPORT_64
 	default n
 	depends on BUSYBOX_CONFIG_EXPR
 	help
-	  Enable 64-bit math support in the expr applet.  This will make
+	  Enable 64-bit math support in the expr applet. This will make
 	  the applet slightly larger, but will allow computation with very
 	  large numbers.
 
@@ -509,18 +510,33 @@ config BUSYBOX_CONFIG_SHA1SUM
 	  Compute and check SHA1 message digest
 
 config BUSYBOX_CONFIG_SLEEP
-	bool "sleep (single integer arg with no suffix)"
+	bool "sleep"
 	default y
 	help
-	  sleep is used to pause for a specified number of seconds,
+	  sleep is used to pause for a specified number of seconds.
+	  It comes in 3 versions:
+	  - small: takes one integer parameter
+	  - fancy: takes multiple integer arguments with suffixes:
+	    sleep 1d 2h 3m 15s
+	  - fancy with fractional numbers:
+	    sleep 2.3s 4.5h sleeps for 16202.3 seconds
+	  Last one is "the most compatible" with coreutils sleep,
+	  but it adds around 1k of code.
 
 config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
-	bool "Enable multiple integer args and optional time suffixes"
+	bool "Enable multiple arguments and s/m/h/d suffixes"
 	default y
 	depends on BUSYBOX_CONFIG_SLEEP
 	help
 	  Allow sleep to pause for specified minutes, hours, and days.
 
+config BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP
+	bool "Enable fractional arguments"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
+	help
+	  Allow for fractional numeric parameters.
+
 config BUSYBOX_CONFIG_SORT
 	bool "sort"
 	default y
@@ -532,9 +548,9 @@ config BUSYBOX_CONFIG_FEATURE_SORT_BIG
 	default n
 	depends on BUSYBOX_CONFIG_SORT
 	help
-	  Without this, sort only supports  -r, -u, and an integer version
-	  of -n.  Selecting this adds sort keys, floating point support, and
-	  more.  This adds a little over 3k to a nonstatic build on x86.
+	  Without this, sort only supports -r, -u, and an integer version
+	  of -n. Selecting this adds sort keys, floating point support, and
+	  more. This adds a little over 3k to a nonstatic build on x86.
 
 	  The SuSv3 sort standard is available at:
 	  http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
@@ -566,7 +582,7 @@ config BUSYBOX_CONFIG_FEATURE_STAT_FORMAT
 	depends on BUSYBOX_CONFIG_STAT
 	help
 	  Without this, stat will not support the '-c format' option where
-	  users can pass a custom format string for output.  This adds about
+	  users can pass a custom format string for output. This adds about
 	  7k to a nonstatic build on amd64.
 
 config BUSYBOX_CONFIG_STTY
@@ -627,7 +643,7 @@ config BUSYBOX_CONFIG_TEST
 	default y
 	help
 	  test is used to check file types and compare values,
-	  returning an appropriate exit code.  The bash shell
+	  returning an appropriate exit code. The bash shell
 	  has test built in, ash can build it in optionally.
 
 config BUSYBOX_CONFIG_FEATURE_TEST_64
@@ -738,7 +754,7 @@ config BUSYBOX_CONFIG_FEATURE_WC_LARGE
 	default n
 	depends on BUSYBOX_CONFIG_WC
 	help
-	  Use "unsigned long long" in wc for count variables
+	  Use "unsigned long long" in wc for count variables.
 
 config BUSYBOX_CONFIG_WHO
 	bool "who"
diff --git a/package/busybox/config/debianutils/Config.in b/package/busybox/config/debianutils/Config.in
index bc37c15fb..b2118c863 100644
--- a/package/busybox/config/debianutils/Config.in
+++ b/package/busybox/config/debianutils/Config.in
@@ -26,8 +26,8 @@ config BUSYBOX_CONFIG_RUN_PARTS
 	  It is useful to set up a directory like cron.daily, where you need to
 	  execute all the scripts in that directory.
 
-	  In this implementation of run-parts some features (such as report mode)
-	  are not implemented.
+	  In this implementation of run-parts some features (such as report
+	  mode) are not implemented.
 
 	  Unless you know that run-parts is used in some of your scripts
 	  you can safely say N here.
diff --git a/package/busybox/config/e2fsprogs/Config.in b/package/busybox/config/e2fsprogs/Config.in
index 50a073e12..e0e2c1ec3 100644
--- a/package/busybox/config/e2fsprogs/Config.in
+++ b/package/busybox/config/e2fsprogs/Config.in
@@ -38,7 +38,7 @@ config BUSYBOX_CONFIG_LSATTR
 ###	bool "mke2fs"
 ###	default n
 ###	help
-###	  mke2fs is used to create an ext2/ext3 filesystem.  The normal compat
+###	  mke2fs is used to create an ext2/ext3 filesystem. The normal compat
 ###	  symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
 
 ### config TUNE2FS
diff --git a/package/busybox/config/e2fsprogs/old_e2fsprogs/Config.in b/package/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
index e9ef3dc04..0b7ce4d10 100644
--- a/package/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
+++ b/package/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
@@ -38,7 +38,7 @@ config BUSYBOX_CONFIG_MKE2FS
 	bool "mke2fs"
 	default n
 	help
-	  mke2fs is used to create an ext2/ext3 filesystem.  The normal compat
+	  mke2fs is used to create an ext2/ext3 filesystem. The normal compat
 	  symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
 
 config BUSYBOX_CONFIG_TUNE2FS
diff --git a/package/busybox/config/editors/Config.in b/package/busybox/config/editors/Config.in
index 4f69381a9..fd1da4b37 100644
--- a/package/busybox/config/editors/Config.in
+++ b/package/busybox/config/editors/Config.in
@@ -9,7 +9,7 @@ config BUSYBOX_CONFIG_AWK
 	bool "awk"
 	default y
 	help
-	  Awk is used as a pattern scanning and processing language.  This is
+	  Awk is used as a pattern scanning and processing language. This is
 	  the BusyBox implementation of that programming language.
 
 config BUSYBOX_CONFIG_FEATURE_AWK_MATH
@@ -64,7 +64,7 @@ config BUSYBOX_CONFIG_ED
 	default n
 	help
 	  The original 1970's Unix text editor, from the days of teletypes.
-	  Small, simple, evil.  Part of SUSv3.  If you're not already using
+	  Small, simple, evil. Part of SUSv3. If you're not already using
 	  this, you don't need it.
 
 config BUSYBOX_CONFIG_PATCH
@@ -84,9 +84,9 @@ config BUSYBOX_CONFIG_VI
 	bool "vi"
 	default y
 	help
-	  'vi' is a text editor.  More specifically, it is the One True
-	  text editor <grin>.  It does, however, have a rather steep
-	  learning curve.  If you are not already comfortable with 'vi'
+	  'vi' is a text editor. More specifically, it is the One True
+	  text editor <grin>. It does, however, have a rather steep
+	  learning curve. If you are not already comfortable with 'vi'
 	  you may wish to use something else.
 
 config BUSYBOX_CONFIG_FEATURE_VI_MAX_LEN
@@ -113,7 +113,7 @@ config BUSYBOX_CONFIG_FEATURE_VI_COLON
 	default y
 	depends on BUSYBOX_CONFIG_VI
 	help
-	  Enable a limited set of colon commands for vi.  This does not
+	  Enable a limited set of colon commands for vi. This does not
 	  provide an "ex" mode.
 
 config BUSYBOX_CONFIG_FEATURE_VI_YANKMARK
@@ -137,7 +137,7 @@ config BUSYBOX_CONFIG_FEATURE_VI_USE_SIGNALS
 	default y
 	depends on BUSYBOX_CONFIG_VI
 	help
-	  Selecting this option will make busybox vi signal aware.  This will
+	  Selecting this option will make busybox vi signal aware. This will
 	  make busybox vi support SIGWINCH to deal with Window Changes, catch
 	  Ctrl-Z and Ctrl-C and alarms.
 
diff --git a/package/busybox/config/findutils/Config.in b/package/busybox/config/findutils/Config.in
index 047755526..54ef44e17 100644
--- a/package/busybox/config/findutils/Config.in
+++ b/package/busybox/config/findutils/Config.in
@@ -17,7 +17,7 @@ config BUSYBOX_CONFIG_FEATURE_FIND_PRINT0
 	depends on BUSYBOX_CONFIG_FIND
 	help
 	  Causes output names to be separated by a null character
-	  rather than a newline.  This allows names that contain
+	  rather than a newline. This allows names that contain
 	  newlines and other whitespace to be more easily
 	  interpreted by other programs.
 
@@ -182,7 +182,7 @@ config BUSYBOX_CONFIG_FEATURE_GREP_EGREP_ALIAS
 	default y
 	depends on BUSYBOX_CONFIG_GREP
 	help
-	  Enabled support for extended regular expressions.  Extended
+	  Enabled support for extended regular expressions. Extended
 	  regular expressions allow for alternation (foo|bar), grouping,
 	  and various repetition operators.
 
diff --git a/package/busybox/config/init/Config.in b/package/busybox/config/init/Config.in
index 6e3bf9ddd..07f6fae78 100644
--- a/package/busybox/config/init/Config.in
+++ b/package/busybox/config/init/Config.in
@@ -80,7 +80,7 @@ config BUSYBOX_CONFIG_FEATURE_INIT_COREDUMPS
 	help
 	  If this option is enabled and the file /.init_enable_core
 	  exists, then init will call setrlimit() to allow unlimited
-	  core file sizes.  If this option is disabled, processes
+	  core file sizes. If this option is disabled, processes
 	  will not generate any core files.
 
 
@@ -90,7 +90,7 @@ config BUSYBOX_CONFIG_FEATURE_INITRD
 	default n
 	depends on BUSYBOX_CONFIG_INIT
 	help
-	  Legacy support for running init under the old-style initrd.  Allows
+	  Legacy support for running init under the old-style initrd. Allows
 	  the name linuxrc to act as init, and it doesn't assume init is PID 1.
 
 	  This does not apply to initramfs, which runs /init as PID 1 and
@@ -106,7 +106,7 @@ config BUSYBOX_CONFIG_MESG
 	bool "mesg"
 	default y
 	help
-	  Mesg controls access to your terminal by others.  It is typically
+	  Mesg controls access to your terminal by others. It is typically
 	  used to allow or disallow other users to write to your terminal
 
 endmenu
diff --git a/package/busybox/config/libbb/Config.in b/package/busybox/config/libbb/Config.in
index 879abf0f6..e456dd8e7 100644
--- a/package/busybox/config/libbb/Config.in
+++ b/package/busybox/config/libbb/Config.in
@@ -62,7 +62,7 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_VI
 	default n
 	depends on BUSYBOX_CONFIG_FEATURE_EDITING
 	help
-	  Enable vi-style line editing.  In shells, this mode can be
+	  Enable vi-style line editing. In shells, this mode can be
 	  turned on and off with "set -o vi" and "set +o vi".
 
 config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
diff --git a/package/busybox/config/loginutils/Config.in b/package/busybox/config/loginutils/Config.in
index a0f1ca95e..fa9f65e1c 100644
--- a/package/busybox/config/loginutils/Config.in
+++ b/package/busybox/config/loginutils/Config.in
@@ -9,7 +9,7 @@ config BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS
 	bool "Support for shadow passwords"
 	default n
 	help
-	  Build support for shadow password in /etc/shadow.  This file is only
+	  Build support for shadow password in /etc/shadow. This file is only
 	  readable by root and thus the encrypted passwords are no longer
 	  publicly readable.
 
@@ -18,17 +18,17 @@ config BUSYBOX_CONFIG_USE_BB_PWD_GRP
 	default n
 	help
 	  If you leave this disabled, busybox will use the system's password
-	  and group functions.  And if you are using the GNU C library
+	  and group functions. And if you are using the GNU C library
 	  (glibc), you will then need to install the /etc/nsswitch.conf
 	  configuration file and the required /lib/libnss_* libraries in
-	  order for the password and group functions to work.  This generally
+	  order for the password and group functions to work. This generally
 	  makes your embedded system quite a bit larger.
 
 	  Enabling this option will cause busybox to directly access the
 	  system's /etc/password, /etc/group files (and your system will be
 	  smaller, and I will get fewer emails asking about how glibc NSS
-	  works).  When this option is enabled, you will not be able to use
-	  PAM to access remote LDAP password servers and whatnot.  And if you
+	  works). When this option is enabled, you will not be able to use
+	  PAM to access remote LDAP password servers and whatnot. And if you
 	  want hostname resolution to work with glibc, you still need the
 	  /lib/libnss_* libraries.
 
@@ -44,16 +44,16 @@ config BUSYBOX_CONFIG_USE_BB_SHADOW
 	depends on BUSYBOX_CONFIG_USE_BB_PWD_GRP && BUSYBOX_CONFIG_FEATURE_SHADOWPASSWDS
 	help
 	  If you leave this disabled, busybox will use the system's shadow
-	  password handling functions.  And if you are using the GNU C library
+	  password handling functions. And if you are using the GNU C library
 	  (glibc), you will then need to install the /etc/nsswitch.conf
 	  configuration file and the required /lib/libnss_* libraries in
-	  order for the shadow password functions to work.  This generally
+	  order for the shadow password functions to work. This generally
 	  makes your embedded system quite a bit larger.
 
 	  Enabling this option will cause busybox to directly access the
-	  system's /etc/shadow file when handling shadow passwords.  This
+	  system's /etc/shadow file when handling shadow passwords. This
 	  makes your system smaller (and I will get fewer emails asking about
-	  how glibc NSS works).  When this option is enabled, you will not be
+	  how glibc NSS works). When this option is enabled, you will not be
 	  able to use PAM to access shadow passwords from remote LDAP
 	  password servers and whatnot.
 
@@ -66,7 +66,7 @@ config BUSYBOX_CONFIG_USE_BB_CRYPT
 	  standard C library functions.
 
 	  If you leave this disabled, busybox will use the system's
-	  crypt functions.  Most C libraries use large (~70k)
+	  crypt functions. Most C libraries use large (~70k)
 	  static buffers there, and also combine them with more general
 	  DES encryption/decryption.
 
@@ -101,7 +101,7 @@ config BUSYBOX_CONFIG_DELGROUP
 	  Utility for deleting a group account.
 
 config BUSYBOX_CONFIG_FEATURE_DEL_USER_FROM_GROUP
-	bool "Support for removing users from groups."
+	bool "Support for removing users from groups"
 	default n
 	depends on BUSYBOX_CONFIG_DELGROUP
 	help
@@ -211,9 +211,9 @@ config BUSYBOX_CONFIG_PASSWD
 	select BUSYBOX_CONFIG_FEATURE_SUID
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  passwd changes passwords for user and group accounts.  A normal user
+	  passwd changes passwords for user and group accounts. A normal user
 	  may only change the password for his/her own account, the super user
-	  may change the password for any account.  The administrator of a group
+	  may change the password for any account. The administrator of a group
 	  may change the password for the group.
 
 	  Note that Busybox binary must be setuid root for this applet to
diff --git a/package/busybox/config/miscutils/Config.in b/package/busybox/config/miscutils/Config.in
index 236d5d678..df5f28cfd 100644
--- a/package/busybox/config/miscutils/Config.in
+++ b/package/busybox/config/miscutils/Config.in
@@ -101,7 +101,7 @@ config BUSYBOX_CONFIG_CROND
 	help
 	  Crond is a background daemon that parses individual crontab
 	  files and executes commands on behalf of the users in question.
-	  This is a port of dcron from slackware.  It uses files of the
+	  This is a port of dcron from slackware. It uses files of the
 	  format /var/spool/cron/crontabs/<username> files, for example:
 	      $ cat /var/spool/cron/crontabs/root
 	      # Run daily cron jobs at 4:40 every day:
@@ -126,7 +126,7 @@ config BUSYBOX_CONFIG_CRONTAB
 	default y
 	select BUSYBOX_CONFIG_FEATURE_SUID
 	help
-	  Crontab manipulates the crontab for a particular user.  Only
+	  Crontab manipulates the crontab for a particular user. Only
 	  the superuser may specify a different user and/or crontab directory.
 	  Note that Busybox binary must be setuid root for this applet to
 	  work properly.
@@ -167,8 +167,9 @@ config BUSYBOX_CONFIG_DEVFSD_FG_NP
 	default n
 	depends on BUSYBOX_CONFIG_DEVFSD
 	help
-		-fg	Run the daemon in the foreground.
-		-np	Exit  after  parsing  the configuration file. Do not poll for events.
+	  -fg  Run the daemon in the foreground.
+	  -np  Exit after parsing the configuration file.
+	       Do not poll for events.
 
 config BUSYBOX_CONFIG_DEVFSD_VERBOSE
 	bool "Increases logging (and size)"
@@ -184,14 +185,14 @@ config BUSYBOX_CONFIG_FEATURE_DEVFS
 	  This is obsolete and will be going away at the end of 2008..
 
 	  This tells busybox to look for names like /dev/loop/0 instead of
-	  /dev/loop0.  If your /dev directory has normal names instead of
+	  /dev/loop0. If your /dev directory has normal names instead of
 	  devfs names, you don't want this.
 
 config BUSYBOX_CONFIG_EJECT
 	bool "eject"
 	default n
 	help
-	  Used to eject cdroms.  (defaults to /dev/cdrom)
+	  Used to eject cdroms. (defaults to /dev/cdrom)
 
 config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
 	bool "SCSI support"
@@ -226,7 +227,8 @@ config BUSYBOX_CONFIG_INOTIFYD
 	bool "inotifyd"
 	default n
 	help
-	  Simple inotify daemon. Reports filesystem changes. Requires kernel >= 2.6.13
+	  Simple inotify daemon. Reports filesystem changes. Requires
+	  kernel >= 2.6.13
 
 config BUSYBOX_CONFIG_LAST
 	bool "last"
@@ -309,8 +311,8 @@ config BUSYBOX_CONFIG_HDPARM
 	bool "hdparm"
 	default n
 	help
-	  Get/Set hard drive parameters.  Primarily intended for ATA
-	  drives.  Adds about 13k (or around 30k if you enable the
+	  Get/Set hard drive parameters. Primarily intended for ATA
+	  drives. Adds about 13k (or around 30k if you enable the
 	  FEATURE_HDPARM_GET_IDENTITY option)....
 
 config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
@@ -340,7 +342,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
 	  This is dangerous stuff, so you should probably say N.
 
 config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
-	bool "perform device reset (DANGEROUS)"
+	bool "Perform device reset (DANGEROUS)"
 	default n
 	depends on BUSYBOX_CONFIG_HDPARM
 	help
@@ -348,16 +350,16 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
 	  This is dangerous stuff, so you should probably say N.
 
 config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
-	bool "tristate device for hotswap (DANGEROUS)"
+	bool "Tristate device for hotswap (DANGEROUS)"
 	default n
 	depends on BUSYBOX_CONFIG_HDPARM
 	help
 	  Enables the 'hdparm -x' option to tristate device for hotswap,
-	  and the '-b' option to get/set bus state.  This is dangerous
+	  and the '-b' option to get/set bus state. This is dangerous
 	  stuff, so you should probably say N.
 
 config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
-	bool "get/set using_dma flag (DANGEROUS)"
+	bool "Get/set using_dma flag (DANGEROUS)"
 	default n
 	depends on BUSYBOX_CONFIG_HDPARM
 	help
@@ -424,7 +426,7 @@ config BUSYBOX_CONFIG_MT
 	bool "mt"
 	default n
 	help
-	  mt is used to control tape devices.  You can use the mt utility
+	  mt is used to control tape devices. You can use the mt utility
 	  to advance or rewind a tape past a specified number of archive
 	  files on the tape.
 
@@ -445,7 +447,7 @@ config BUSYBOX_CONFIG_READAHEAD
 
 	  This applet just calls the readahead(2) system call on each file.
 	  It is mainly useful in system startup scripts to preload files
-	  or executables before they are used.  When used at the right time
+	  or executables before they are used. When used at the right time
 	  (in particular when a CPU bound process is running) it can
 	  significantly speed up system startup.
 
@@ -509,16 +511,17 @@ config BUSYBOX_CONFIG_TTYSIZE
 	default n
 	help
 	  A replacement for "stty size". Unlike stty, can report only width,
-	  only height, or both, in any order. It also does not complain on error,
-	  but returns default 80x24. Usage in shell scripts: width=`ttysize w`.
+	  only height, or both, in any order. It also does not complain on
+	  error, but returns default 80x24.
+	  Usage in shell scripts: width=`ttysize w`.
 
 config BUSYBOX_CONFIG_WATCHDOG
 	bool "watchdog"
 	default y
 	help
 	  The watchdog utility is used with hardware or software watchdog
-	  device drivers.  It opens the specified watchdog device special file
-	  and periodically writes a magic character to the device.  If the
+	  device drivers. It opens the specified watchdog device special file
+	  and periodically writes a magic character to the device. If the
 	  watchdog applet ever fails to write the magic character within a
 	  certain amount of time, the watchdog device assumes the system has
 	  hung, and will cause the hardware to reboot.
diff --git a/package/busybox/config/modutils/Config.in b/package/busybox/config/modutils/Config.in
index 63a3f71fb..be141d91c 100644
--- a/package/busybox/config/modutils/Config.in
+++ b/package/busybox/config/modutils/Config.in
@@ -5,14 +5,64 @@
 
 menu "Linux Module Utilities"
 
+config BUSYBOX_CONFIG_MODPROBE_SMALL
+	bool "Simplified modutils"
+	default n
+	help
+	  Simplified modutils.
+
+	  With this option modprobe does not require modules.dep file
+	  and does not use /etc/modules.conf file.
+	  It scans module files in /lib/modules/`uname -r` and
+	  determines dependencies and module alias names on the fly.
+	  This may make module loading slower, most notably
+	  when one needs to load module by alias (this requires
+	  scanning through module _bodies_).
+
+	  At the first attempt to load a module by alias modprobe
+	  will try to generate modules.dep.bb file in order to speed up
+	  future loads by alias. Failure to do so (read-only /lib/modules,
+	  etc) is not reported, and future modprobes will be slow too.
+
+	  NB: modules.dep.bb file format is not compatible
+	  with modules.dep file as created/used by standard module tools.
+
+	  Additional module parameters can be stored in
+	  /etc/modules/$module_name files.
+
+	  Apart from modprobe, other utilities are also provided:
+	  - insmod is an alias to modprobe
+	  - rmmod is an alias to modprobe -r
+	  - depmod generates modules.dep.bb
+
+	  As of 2008-07, this code is experimental. It is 14kb smaller
+	  than "non-small" modutils.
+
+config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE
+	bool "Accept module options on modprobe command line"
+	default n
+	depends on BUSYBOX_CONFIG_MODPROBE_SMALL
+	help
+	  Allow insmod and modprobe take module options from command line.
+	  N.B. Very bloaty.
+
+config BUSYBOX_CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
+	bool "Skip loading of already loaded modules"
+	default n
+	depends on BUSYBOX_CONFIG_MODPROBE_SMALL
+	help
+	  Check if the module is already loaded.
+	  N.B. It's racy.
+
 config BUSYBOX_CONFIG_DEPMOD
 	bool "depmod"
 	default n
+	depends on !BUSYBOX_CONFIG_MODPROBE_SMALL
 	help
 	  depmod generates modules.dep (FIXME: elaborate)
 
 config BUSYBOX_CONFIG_FEATURE_DEPMOD_PRUNE_FANCY
-	bool "fancy dependency pruning"
+	bool "Fancy dependency pruning"
 	default n
 	depends on BUSYBOX_CONFIG_DEPMOD
 	help
@@ -26,7 +76,7 @@ config BUSYBOX_CONFIG_FEATURE_DEPMOD_PRUNE_FANCY
 	  If unsure, say N.
 
 config BUSYBOX_CONFIG_FEATURE_DEPMOD_ALIAS
-	bool "alias support"
+	bool "Alias support"
 	default n
 	depends on BUSYBOX_CONFIG_DEPMOD
 	help
@@ -38,6 +88,7 @@ config BUSYBOX_CONFIG_FEATURE_DEPMOD_ALIAS
 config BUSYBOX_CONFIG_INSMOD
 	bool "insmod"
 	default y
+	depends on !BUSYBOX_CONFIG_MODPROBE_SMALL
 	help
 	  insmod is used to load specified modules in the running kernel.
 
@@ -46,7 +97,7 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_VERSION_CHECKING
 	default n
 	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
 	help
-	  Support checking of versions for modules.  This is used to
+	  Support checking of versions for modules. This is used to
 	  ensure that the kernel and module are made for each other.
 
 config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
@@ -55,9 +106,9 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
 	depends on BUSYBOX_CONFIG_INSMOD && BUSYBOX_CONFIG_FEATURE_2_4_MODULES
 	help
 	  By adding module symbols to the kernel symbol table, Oops messages
-	  occuring within kernel modules can be properly debugged.  By enabling
+	  occuring within kernel modules can be properly debugged. By enabling
 	  this feature, module symbols will always be added to the kernel symbol
-	  table for properly debugging support.  If you are not interested in
+	  table for properly debugging support. If you are not interested in
 	  Oops messages from kernel modules, say N.
 
 config BUSYBOX_CONFIG_FEATURE_INSMOD_LOADINKMEM
@@ -87,18 +138,20 @@ config BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL
 	depends on BUSYBOX_CONFIG_FEATURE_INSMOD_LOAD_MAP
 	help
 	  Without this option, -m will only output section
-	  load map.  With this option, -m will also output
+	  load map. With this option, -m will also output
 	  symbols load map.
 
 config BUSYBOX_CONFIG_RMMOD
 	bool "rmmod"
 	default y
+	depends on !BUSYBOX_CONFIG_MODPROBE_SMALL
 	help
 	  rmmod is used to unload specified modules from the kernel.
 
 config BUSYBOX_CONFIG_LSMOD
 	bool "lsmod"
 	default y
+	depends on !BUSYBOX_CONFIG_MODPROBE_SMALL
 	help
 	  lsmod is used to display a list of loaded modules.
 
@@ -113,6 +166,7 @@ config BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
 config BUSYBOX_CONFIG_MODPROBE
 	bool "modprobe"
 	default n
+	depends on !BUSYBOX_CONFIG_MODPROBE_SMALL
 	help
 	  Handle the loading of modules, and their dependencies on a high
 	  level.
@@ -168,7 +222,7 @@ config BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
 	default y
 	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_LSMOD
 	help
-	  Support checking for tainted modules.  These are usually binary
+	  Support checking for tainted modules. These are usually binary
 	  only modules that will make the linux-kernel list ignore your
 	  support request.
 	  This option is required to support GPLONLY modules.
@@ -196,7 +250,7 @@ config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR
 	# Simulate indentation
 	string "Default directory containing modules"
 	default "/lib/modules"
-	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_DEPMOD
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_DEPMOD
 	help
 	  Directory that contains kernel modules.
 	  Defaults to "/lib/modules"
@@ -205,7 +259,7 @@ config BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE
 	# Simulate indentation
 	string "Default name of modules.dep"
 	default "modules.dep"
-	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_DEPMOD
+	depends on BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_RMMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_DEPMOD
 	help
 	  Filename that contains kernel modules dependencies.
 	  Defaults to "modules.dep"
diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
index 0a79cdd8f..76630852b 100644
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@@ -66,12 +66,12 @@ config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
 	  This adds about 600 bytes.
 
 config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
-	bool "Support show"
+	bool "Support show, showmac and showstp"
 	default y
 	depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
 	help
 	  Add support for option which prints the current config:
-	    show
+	    showmacs, showstp, show
 
 config BUSYBOX_CONFIG_DNSD
 	bool "dnsd"
@@ -216,7 +216,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
 	depends on BUSYBOX_CONFIG_HTTPD
 	help
 	  This option allows html encoding of arbitrary strings for display
-	  by the browser.  Output goes to stdout.
+	  by the browser. Output goes to stdout.
 	  For example, httpd -e "<Hello World>" produces
 	  "&#60Hello&#32World&#62".
 
@@ -264,7 +264,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
 	default n
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
-	  Allow "keepalive" and "outfill" support for SLIP.  If you're not
+	  Allow "keepalive" and "outfill" support for SLIP. If you're not
 	  planning on using serial lines, leave this unchecked.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
@@ -281,7 +281,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
 	depends on BUSYBOX_CONFIG_IFCONFIG
 	help
 	  Set the hardware address of this interface, if the device driver
-	  supports  this  operation.  Currently, we only support the 'ether'
+	  supports  this  operation. Currently, we only support the 'ether'
 	  class.
 
 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
@@ -303,15 +303,15 @@ config BUSYBOX_CONFIG_IFUPDOWN
 	bool "ifupdown"
 	default n
 	help
-	  Activate or deactivate the specified interfaces.  This applet makes
+	  Activate or deactivate the specified interfaces. This applet makes
 	  use of either "ifconfig" and "route" or the "ip" command to actually
-	  configure network interfaces.  Therefore, you will probably also want
+	  configure network interfaces. Therefore, you will probably also want
 	  to enable either IFCONFIG and ROUTE, or enable
-	  FEATURE_IFUPDOWN_IP and the various IP options.  Of
+	  FEATURE_IFUPDOWN_IP and the various IP options. Of
 	  course you could use non-busybox versions of these programs, so
 	  against my better judgement (since this will surely result in plenty
 	  of support questions on the mailing list), I do not force you to
-	  enable these additional options.  It is up to you to supply either
+	  enable these additional options. It is up to you to supply either
 	  "ifconfig", "route" and "run-parts" or the "ip" command, either
 	  via busybox or via standalone utilities.
 
@@ -458,7 +458,7 @@ config BUSYBOX_CONFIG_IP
 	default n
 	help
 	  The "ip" applet is a TCP/IP interface configuration and routing
-	  utility.  You generally don't need "ip" to use busybox with
+	  utility. You generally don't need "ip" to use busybox with
 	  TCP/IP.
 
 config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
@@ -558,7 +558,8 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
 	default n
 	depends on BUSYBOX_CONFIG_IPCALC
 	help
-	  Adds the options hostname, prefix and silent to the output of "ipcalc".
+	  Adds the options hostname, prefix and silent to the output of
+	  "ipcalc".
 
 config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
 	bool "Enable long options"
@@ -638,6 +639,14 @@ config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
 	  Add support for wide columns. Useful when displaying IPv6 addresses
 	  (-W option).
 
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
+	bool "Enable PID/Program name output"
+	default n
+	depends on BUSYBOX_CONFIG_NETSTAT
+	help
+	  Add support for -p flag to print out PID and program name.
+	  +700 bytes of code.
+
 config BUSYBOX_CONFIG_NSLOOKUP
 	bool "nslookup"
 	default y
@@ -694,7 +703,8 @@ config BUSYBOX_CONFIG_SLATTACH
 	bool "slattach"
 	default n
 	help
-	  slattach is a small utility to attach network interfaces to serial lines.
+	  slattach is a small utility to attach network interfaces to serial
+	  lines.
 
 config BUSYBOX_CONFIG_TELNET
 	bool "telnet"
@@ -709,7 +719,7 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
 	depends on BUSYBOX_CONFIG_TELNET
 	help
 	  Setting this option will forward the TERM environment variable to the
-	  remote host you are connecting to.  This is useful to make sure that
+	  remote host you are connecting to. This is useful to make sure that
 	  things like ANSI colors and other control sequences behave.
 
 config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
@@ -728,9 +738,9 @@ config BUSYBOX_CONFIG_TELNETD
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
 	  A daemon for the TELNET protocol, allowing you to log onto the host
-	  running the daemon.  Please keep in mind that the TELNET protocol
-	  sends passwords in plain text.  If you can't afford the space for an
-	  SSH daemon and you trust your network, you may say 'y' here.  As a
+	  running the daemon. Please keep in mind that the TELNET protocol
+	  sends passwords in plain text. If you can't afford the space for an
+	  SSH daemon and you trust your network, you may say 'y' here. As a
 	  more secure alternative, you should seriously consider installing the
 	  very small Dropbear SSH daemon instead:
 		http://matt.ucc.asn.au/dropbear/dropbear.html
@@ -756,7 +766,7 @@ config BUSYBOX_CONFIG_TELNETD
 		  mount -t devpts devpts /dev/pts
 
 	  You need to be sure that Busybox has LOGIN and
-	  FEATURE_SUID enabled.  And finally, you should make
+	  FEATURE_SUID enabled. And finally, you should make
 	  certain that Busybox has been installed setuid root:
 
 		chown root.root /bin/busybox
@@ -776,7 +786,7 @@ config BUSYBOX_CONFIG_TFTP
 	bool "tftp"
 	default n
 	help
-	  This enables the Trivial File Transfer Protocol client program.  TFTP
+	  This enables the Trivial File Transfer Protocol client program. TFTP
 	  is usually used for simple, small transfers such as a root image
 	  for a network-enabled bootloader.
 
@@ -795,7 +805,7 @@ config BUSYBOX_CONFIG_FEATURE_TFTP_GET
 	default n
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Add support for the GET command within the TFTP client.  This allows
+	  Add support for the GET command within the TFTP client. This allows
 	  a client to retrieve a file from a TFTP server.
 	  Also enable upload support in tftpd, if tftpd is selected.
 
@@ -804,7 +814,7 @@ config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
 	default n
 	depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 	help
-	  Add support for the PUT command within the TFTP client.  This allows
+	  Add support for the PUT command within the TFTP client. This allows
 	  a client to transfer a file to a TFTP server.
 	  Also enable download support in tftpd, if tftpd is selected.
 
@@ -821,7 +831,7 @@ config BUSYBOX_CONFIG_DEBUG_TFTP
 	default n
 	depends on BUSYBOX_CONFIG_TFTP
 	help
-	  Enable debug settings for tftp.  This is useful if you're running
+	  Enable debug settings for tftp. This is useful if you're running
 	  into problems with tftp as the protocol doesn't help you much when
 	  you run into problems.
 
@@ -836,7 +846,7 @@ config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
 	default y
 	depends on BUSYBOX_CONFIG_TRACEROUTE
 	help
-	  Add some verbosity to traceroute.  This includes amongst other things
+	  Add some verbosity to traceroute. This includes amongst other things
 	  hostnames and ICMP response types.
 
 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
@@ -906,12 +916,14 @@ config BUSYBOX_CONFIG_TCPSVD
 	bool "tcpsvd"
 	default n
 	help
-	  tcpsvd listens on a TCP port and runs a program for each new connection
+	  tcpsvd listens on a TCP port and runs a program for each new
+	  connection.
 
 config BUSYBOX_CONFIG_UDPSVD
 	bool "udpsvd"
 	default n
 	help
-	  udpsvd listens on an UDP port and runs a program for each new connection
+	  udpsvd listens on an UDP port and runs a program for each new
+	  connection.
 
 endmenu
diff --git a/package/busybox/config/procps/Config.in b/package/busybox/config/procps/Config.in
index f650f5220..ac9316399 100644
--- a/package/busybox/config/procps/Config.in
+++ b/package/busybox/config/procps/Config.in
@@ -18,7 +18,7 @@ config BUSYBOX_CONFIG_FUSER
 	default n
 	help
 	  fuser lists all PIDs (Process IDs) that currently have a given
-	  file open.  fuser can also list all PIDs that have a given network
+	  file open. fuser can also list all PIDs that have a given network
 	  (TCP or UDP) port open.
 
 config BUSYBOX_CONFIG_KILL
@@ -26,7 +26,7 @@ config BUSYBOX_CONFIG_KILL
 	default y
 	help
 	  The command kill sends the specified signal to the specified
-	  process or process group.  If no signal is specified, the TERM
+	  process or process group. If no signal is specified, the TERM
 	  signal is sent.
 
 config BUSYBOX_CONFIG_KILLALL
@@ -35,7 +35,7 @@ config BUSYBOX_CONFIG_KILLALL
 	depends on BUSYBOX_CONFIG_KILL
 	help
 	  killall sends a signal to all processes running any of the
-	  specified commands.  If no signal name is specified, SIGTERM is
+	  specified commands. If no signal name is specified, SIGTERM is
 	  sent.
 
 config BUSYBOX_CONFIG_KILLALL5
diff --git a/package/busybox/config/shell/Config.in b/package/busybox/config/shell/Config.in
index 141a1d315..4107e127d 100644
--- a/package/busybox/config/shell/Config.in
+++ b/package/busybox/config/shell/Config.in
@@ -39,7 +39,7 @@ config BUSYBOX_CONFIG_ASH
 	help
 	  Tha 'ash' shell adds about 60k in the default configuration and is
 	  the most complete and most pedantically correct shell included with
-	  busybox.  This shell is actually a derivative of the Debian 'dash'
+	  busybox. This shell is actually a derivative of the Debian 'dash'
 	  shell (by Herbert Xu), which was created by porting the 'ash' shell
 	  (written by Kenneth Almquist) from NetBSD.
 
@@ -51,7 +51,7 @@ config BUSYBOX_CONFIG_ASH_BASH_COMPAT
 	default y
 	depends on BUSYBOX_CONFIG_ASH
 	help
-	  Enable bash-conpatible extensions.
+	  Enable bash-compatible extensions.
 
 config BUSYBOX_CONFIG_ASH_JOB_CONTROL
 	bool "Job control"
@@ -69,7 +69,7 @@ config BUSYBOX_CONFIG_ASH_READ_NCHARS
 	  'read -s' will read without echoing the user's input.
 
 config BUSYBOX_CONFIG_ASH_READ_TIMEOUT
-	bool "'read -t S' support."
+	bool "'read -t S' support"
 	default y
 	depends on BUSYBOX_CONFIG_ASH
 	help
@@ -96,7 +96,7 @@ config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
 	default y
 	depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
 	help
-	  Enable 64-bit math support in the ash shell.  This will make
+	  Enable 64-bit math support in the ash shell. This will make
 	  the shell slightly larger, but will allow computation with very
 	  large numbers.
 
@@ -176,11 +176,13 @@ config BUSYBOX_CONFIG_HUSH
 	default n
 	help
 	  hush is a very small shell (just 18k) and it has fairly complete
-	  Bourne shell grammar.  It even handles all the normal flow control
+	  Bourne shell grammar. It even handles all the normal flow control
 	  options such as if/then/elif/else/fi, for/in/do/done, while loops,
-	  etc.
+	  case/esac.
 
-	  It does not handle case/esac, select, function, here documents ( <<
+	  It uses only vfork, so it can be used on uClinux systems.
+
+	  It does not handle select, functions, here documents ( <<
 	  word ), arithmetic expansion, aliases, brace expansion, tilde
 	  expansion, &> and >& redirection of stdout+stderr, etc.
 
@@ -232,6 +234,14 @@ config BUSYBOX_CONFIG_HUSH_LOOPS
 	depends on BUSYBOX_CONFIG_HUSH
 	help
 	  Enable for, while and until loops in hush.
+	  As of 2008-07, break and continue statements are not supported.
+
+config BUSYBOX_CONFIG_HUSH_CASE
+	bool "Support case ... esac statement"
+	default n
+	depends on BUSYBOX_CONFIG_HUSH
+	help
+	  Enable case ... esac statement in hush. +400 bytes.
 
 config BUSYBOX_CONFIG_LASH
 	bool "lash"
@@ -246,10 +256,10 @@ config BUSYBOX_CONFIG_MSH
 	help
 	  The minix shell (adds just 30k) is quite complete and handles things
 	  like for/do/done, case/esac and all the things you expect a Bourne
-	  shell to do.  It is not always pedantically correct about Bourne
+	  shell to do. It is not always pedantically correct about Bourne
 	  shell grammar (try running the shell testscript "tests/sh.testcases"
 	  on it and compare vs bash) but for most things it works quite well.
-	  It also uses only vfork, so it can be used on uClinux systems.
+	  It uses only vfork, so it can be used on uClinux systems.
 
 comment "Bourne Shell Options"
 	depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
@@ -267,11 +277,11 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
 	depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
 	help
 	  This option causes busybox shells to use busybox applets
-	  in preference to executables in the PATH whenever possible.  For
+	  in preference to executables in the PATH whenever possible. For
 	  example, entering the command 'ifconfig' into the shell would cause
-	  busybox to use the ifconfig busybox applet.  Specifying the fully
+	  busybox to use the ifconfig busybox applet. Specifying the fully
 	  qualified executable name, such as '/sbin/ifconfig' will still
-	  execute the /sbin/ifconfig executable on the filesystem.  This option
+	  execute the /sbin/ifconfig executable on the filesystem. This option
 	  is generally used when creating a statically linked version of busybox
 	  for use as a rescue shell, in the event that you screw up your system.
 
@@ -285,12 +295,12 @@ config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
 	  started this way).
 # untrue?
 #	  Note that this will *also* cause applets to take precedence
-#	  over shell builtins of the same name.  So turning this on will
+#	  over shell builtins of the same name. So turning this on will
 #	  eliminate any performance gained by turning on the builtin "echo"
 #	  and "test" commands in ash.
 # untrue?
 #	  Note that when using this option, the shell will attempt to directly
-#	  run '/bin/busybox'.  If you do not have the busybox binary sitting in
+#	  run '/bin/busybox'. If you do not have the busybox binary sitting in
 #	  that exact location with that exact name, this option will not work at
 #	  all.
 
diff --git a/package/busybox/config/sysklogd/Config.in b/package/busybox/config/sysklogd/Config.in
index c4ce8e6c7..b9e0db2fa 100644
--- a/package/busybox/config/sysklogd/Config.in
+++ b/package/busybox/config/sysklogd/Config.in
@@ -10,14 +10,14 @@ config BUSYBOX_CONFIG_SYSLOGD
 	default y
 	help
 	  The syslogd utility is used to record logs of all the
-	  significant events that occur on a system.  Every
+	  significant events that occur on a system. Every
 	  message that is logged records the date and time of the
 	  event, and will generally also record the name of the
-	  application that generated the message.  When used in
+	  application that generated the message. When used in
 	  conjunction with klogd, messages from the Linux kernel
-	  can also be recorded.  This is terribly useful,
+	  can also be recorded. This is terribly useful,
 	  especially for finding what happened when something goes
-	  wrong.  And something almost always will go wrong if
+	  wrong. And something almost always will go wrong if
 	  you wait long enough....
 
 config BUSYBOX_CONFIG_FEATURE_ROTATE_LOGFILE
@@ -35,10 +35,10 @@ config BUSYBOX_CONFIG_FEATURE_REMOTE_LOG
 	help
 	  When you enable this feature, the syslogd utility can
 	  be used to send system log messages to another system
-	  connected via a network.  This allows the remote
+	  connected via a network. This allows the remote
 	  machine to log all the system messages, which can be
 	  terribly useful for reducing the number of serial
-	  cables you use.  It can also be a very good security
+	  cables you use. It can also be a very good security
 	  measure to prevent system logs from being tampered with
 	  by an intruder.
 
@@ -58,7 +58,7 @@ config BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
 	  When you enable this feature, the syslogd utility will
 	  use a circular buffer to record system log messages.
 	  When the buffer is filled it will continue to overwrite
-	  the oldest messages.  This can be very useful for
+	  the oldest messages. This can be very useful for
 	  systems with little or no permanent storage, since
 	  otherwise system logs can eventually fill up your
 	  entire filesystem, which may cause your system to
@@ -79,7 +79,7 @@ config BUSYBOX_CONFIG_LOGREAD
 	depends on BUSYBOX_CONFIG_FEATURE_IPC_SYSLOG
 	help
 	  If you enabled Circular Buffer support, you almost
-	  certainly want to enable this feature as well.  This
+	  certainly want to enable this feature as well. This
 	  utility will allow you to read the messages that are
 	  stored in the syslogd circular buffer.
 
@@ -100,7 +100,7 @@ config BUSYBOX_CONFIG_KLOGD
 	help
 	  klogd is a utility which intercepts and logs all
 	  messages from the Linux kernel and sends the messages
-	  out to the 'syslogd' utility so they can be logged.  If
+	  out to the 'syslogd' utility so they can be logged. If
 	  you wish to record the messages produced by the kernel,
 	  you should enable this option.
 
@@ -111,7 +111,7 @@ config BUSYBOX_CONFIG_LOGGER
 	help
 	    The logger utility allows you to send arbitrary text
 	    messages to the system log (i.e. the 'syslogd' utility) so
-	    they can be logged.  This is generally used to help locate
+	    they can be logged. This is generally used to help locate
 	    problems that occur within programs and scripts.
 
 endmenu
diff --git a/package/busybox/config/util-linux/Config.in b/package/busybox/config/util-linux/Config.in
index 5c5af20e5..6e3fc39b4 100644
--- a/package/busybox/config/util-linux/Config.in
+++ b/package/busybox/config/util-linux/Config.in
@@ -9,12 +9,12 @@ config BUSYBOX_CONFIG_DMESG
 	bool "dmesg"
 	default y
 	help
-	  dmesg is used to examine or control the kernel ring buffer.  When the
+	  dmesg is used to examine or control the kernel ring buffer. When the
 	  Linux kernel prints messages to the system log, they are stored in
-	  the kernel ring buffer.  You can use dmesg to print the kernel's ring
+	  the kernel ring buffer. You can use dmesg to print the kernel's ring
 	  buffer, clear the kernel ring buffer, change the size of the kernel
 	  ring buffer, and change the priority level at which kernel messages
-	  are also logged to the system console.  Enable this option if you
+	  are also logged to the system console. Enable this option if you
 	  wish to enable the 'dmesg' utility.
 
 config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
@@ -23,7 +23,8 @@ config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
 	depends on BUSYBOX_CONFIG_DMESG
 	help
 	  If you wish to scrub the syslog level from the output, say 'Y' here.
-	  The syslog level is a string prefixed to every line with the form "<#>".
+	  The syslog level is a string prefixed to every line with the form
+	  "<#>".
 
 	  With this option you will see:
 	    # dmesg
@@ -42,8 +43,8 @@ config BUSYBOX_CONFIG_FBSET
 	default n
 	help
 	  fbset is used to show or change the settings of a Linux frame buffer
-	  device.  The frame buffer device provides a simple and unique
-	  interface to access a graphics display.  Enable this option
+	  device. The frame buffer device provides a simple and unique
+	  interface to access a graphics display. Enable this option
 	  if you wish to enable the 'fbset' utility.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
@@ -52,8 +53,8 @@ config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 	depends on BUSYBOX_CONFIG_FBSET
 	help
 	  This option enables extended fbset options, allowing one to set the
-	  framebuffer size, color depth, etc.  interface to access a graphics
-	  display.  Enable this option if you wish to enable extended fbset
+	  framebuffer size, color depth, etc. interface to access a graphics
+	  display. Enable this option if you wish to enable extended fbset
 	  options.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
@@ -70,11 +71,11 @@ config BUSYBOX_CONFIG_FDFLUSH
 	default n
 	help
 	  fdflush is only needed when changing media on slightly-broken
-	  removable media drives.  It is used to make Linux believe that a
+	  removable media drives. It is used to make Linux believe that a
 	  hardware disk-change switch has been actuated, which causes Linux to
-	  forget anything it has cached from the previous media.  If you have
+	  forget anything it has cached from the previous media. If you have
 	  such a slightly-broken drive, you will need to run fdflush every time
-	  you change a disk.  Most people have working hardware and can safely
+	  you change a disk. Most people have working hardware and can safely
 	  leave this disabled.
 
 config BUSYBOX_CONFIG_FDFORMAT
@@ -88,7 +89,7 @@ config BUSYBOX_CONFIG_FDISK
 	default n
 	help
 	  The fdisk utility is used to divide hard disks into one or more
-	  logical disks, which are generally called partitions.  This utility
+	  logical disks, which are generally called partitions. This utility
 	  can be used to list and edit the set of partitions or BSD style
 	  'disk slices' that are defined on a hard drive.
 
@@ -105,7 +106,7 @@ config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	depends on BUSYBOX_CONFIG_FDISK
 	help
 	  Enabling this option allows you to create or change a partition table
-	  and write those changes out to disk.  If you leave this option
+	  and write those changes out to disk. If you leave this option
 	  disabled, you will only be able to view the partition table.
 
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
@@ -147,7 +148,7 @@ config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 	help
 	  Enabling this option allows you to do terribly unsafe things like
 	  define arbitrary drive geometry, move the beginning of data in a
-	  partition, and similarly evil things.  Unless you have a very good
+	  partition, and similarly evil things. Unless you have a very good
 	  reason you would be wise to leave this disabled.
 
 config BUSYBOX_CONFIG_FINDFS
@@ -156,7 +157,7 @@ config BUSYBOX_CONFIG_FINDFS
 	select BUSYBOX_CONFIG_VOLUMEID
 	help
 	  This is similar to the findfs program that is part of the e2fsprogs
-	  package.  However, the e2fsprogs version only support ext2/3.  This
+	  package. However, the e2fsprogs version only support ext2/3. This
 	  version supports those in addition to FAT, swap, and ReiserFS.
 	  WARNING:
 	  With all submodules selected, it will add ~8k to busybox.
@@ -165,11 +166,11 @@ config BUSYBOX_CONFIG_FREERAMDISK
 	bool "freeramdisk"
 	default n
 	help
-	  Linux allows you to create ramdisks.  This utility allows you to
+	  Linux allows you to create ramdisks. This utility allows you to
 	  delete them and completely free all memory that was used for the
-	  ramdisk.  For example, if you boot Linux into a ramdisk and later
+	  ramdisk. For example, if you boot Linux into a ramdisk and later
 	  pivot_root, you may want to free the memory that is allocated to the
-	  ramdisk.  If you have no use for freeing memory from a ramdisk, leave
+	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
 	  this disabled.
 
 config BUSYBOX_CONFIG_FSCK_MINIX
@@ -177,9 +178,9 @@ config BUSYBOX_CONFIG_FSCK_MINIX
 	default n
 	help
 	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead.  It is not a journaling filesystem however and
+	  with little overhead. It is not a journaling filesystem however and
 	  can experience corruption if it is not properly unmounted or if the
-	  power goes off in the middle of a write.  This utility allows you to
+	  power goes off in the middle of a write. This utility allows you to
 	  check for and attempt to repair any corruption that occurs to a minix
 	  filesystem.
 
@@ -188,8 +189,8 @@ config BUSYBOX_CONFIG_MKFS_MINIX
 	default n
 	help
 	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead.  If you wish to be able to create minix filesystems
-	  this utility will do the job for you.
+	  with little overhead. If you wish to be able to create minix
+	  filesystems this utility will do the job for you.
 
 comment "Minix filesystem support"
 	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
@@ -199,9 +200,9 @@ config BUSYBOX_CONFIG_FEATURE_MINIX2
 	default n
 	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 	help
-	  If you wish to be able to create version 2 minix filesystems, enable this.
-	  If you enabled 'mkfs_minix' then you almost certainly want to be using the
-	  version 2 filesystem support.
+	  If you wish to be able to create version 2 minix filesystems, enable
+	  this. If you enabled 'mkfs_minix' then you almost certainly want to
+	  be using the version 2 filesystem support.
 
 config BUSYBOX_CONFIG_GETOPT
 	bool "getopt"
@@ -209,9 +210,9 @@ config BUSYBOX_CONFIG_GETOPT
 	help
 	  The getopt utility is used to break up (parse) options in command
 	  lines to make it easy to write complex shell scripts that also check
-	  for legal (and illegal) options.  If you want to write horribly
+	  for legal (and illegal) options. If you want to write horribly
 	  complex shell scripts, or use some horribly complex shell script
-	  written by others, this utility may be for you.  Most people will
+	  written by others, this utility may be for you. Most people will
 	  wisely leave this disabled.
 
 config BUSYBOX_CONFIG_HEXDUMP
@@ -243,7 +244,7 @@ config BUSYBOX_CONFIG_HWCLOCK
 	default y
 	help
 	  The hwclock utility is used to read and set the hardware clock
-	  on a system.  This is primarily used to set the current time on
+	  on a system. This is primarily used to set the current time on
 	  shutdown in the hardware clock, so the hardware will keep the
 	  correct time when Linux is _not_ running.
 
@@ -252,7 +253,7 @@ config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
 	default n
 	depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_GETOPT_LONG
 	help
-	  By default, the hwclock utility only uses short options.  If you
+	  By default, the hwclock utility only uses short options. If you
 	  are overly fond of its long options, such as --hctosys, --utc, etc)
 	  then enable this option.
 
@@ -262,11 +263,11 @@ config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
 	depends on BUSYBOX_CONFIG_HWCLOCK
 	help
 	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-	  at /var/lib/hwclock/adjtime instead of /etc/adjtime.  If you wish
+	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
 	  to use the FHS behavior, answer Y here, otherwise answer N for the
 	  classic /etc/adjtime path.
 
-	  http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 
 config BUSYBOX_CONFIG_IPCRM
 	bool "ipcrm"
@@ -290,7 +291,7 @@ config BUSYBOX_CONFIG_LOSETUP
 	default n
 	help
 	  losetup is used to associate or detach a loop device with a regular
-	  file or block device, and to query the status of a loop device.  This
+	  file or block device, and to query the status of a loop device. This
 	  version does not currently support enabling data encryption.
 
 config BUSYBOX_CONFIG_MDEV
@@ -326,7 +327,8 @@ config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
 	default n
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 	help
-	  Add support for regular expressions substitutions when renaming device.
+	  Add support for regular expressions substitutions when renaming
+	  device.
 
 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 	bool "Support command execution at device addition/removal"
@@ -354,9 +356,9 @@ config BUSYBOX_CONFIG_MKSWAP
 	default n
 	help
 	  The mkswap utility is used to configure a file or disk partition as
-	  Linux swap space.  This allows Linux to use the entire file or
+	  Linux swap space. This allows Linux to use the entire file or
 	  partition as if it were additional RAM, which can greatly increase
-	  the capability of low-memory machines.  This additional memory is
+	  the capability of low-memory machines. This additional memory is
 	  much slower than real RAM, but can be very helpful at preventing your
 	  applications being killed by the Linux out of memory (OOM) killer.
 	  Once you have created swap space using 'mkswap' you need to enable
@@ -377,9 +379,9 @@ config BUSYBOX_CONFIG_MORE
 	default n
 	help
 	  more is a simple utility which allows you to read text one screen
-	  sized page at a time.  If you want to read text that is larger than
+	  sized page at a time. If you want to read text that is larger than
 	  the screen, and you are using anything faster than a 300 baud modem,
-	  you will probably find this utility very helpful.  If you don't have
+	  you will probably find this utility very helpful. If you don't have
 	  any need to reading text files, you can leave this disabled.
 
 config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
@@ -388,7 +390,7 @@ config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
 	depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP
 	help
 	  This option allows utilities such as 'more' and 'top' to determine
-	  the size of the screen.  If you leave this disabled, your utilities
+	  the size of the screen. If you leave this disabled, your utilities
 	  that display things on the screen will be especially primitive and
 	  will be unable to determine the current screen size, and will be
 	  unable to move the cursor.
@@ -608,10 +610,10 @@ config BUSYBOX_CONFIG_MOUNT
 	default y
 	help
 	  All files and filesystems in Unix are arranged into one big directory
-	  tree.  The 'mount' utility is used to graft a filesystem onto a
-	  particular part of the tree.  A filesystem can either live on a block
+	  tree. The 'mount' utility is used to graft a filesystem onto a
+	  particular part of the tree. A filesystem can either live on a block
 	  device, or it can be accessible over the network, as is the case with
-	  NFS filesystems.  Most people using BusyBox will also want to enable
+	  NFS filesystems. Most people using BusyBox will also want to enable
 	  the 'mount' utility.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
@@ -649,7 +651,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 	select BUSYBOX_CONFIG_VOLUMEID
 	help
 	  This allows for specifying a device by label or uuid, rather than by
-	  name.  This feature utilizes the same functionality as findfs.
+	  name. This feature utilizes the same functionality as findfs.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
 	bool "Support mounting NFS file systems"
@@ -672,7 +674,7 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
 	bool "Support lots of -o flags in mount"
 	default y
 	help
-	  Without this, mount only supports ro/rw/remount.  With this, it
+	  Without this, mount only supports ro/rw/remount. With this, it
 	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
 	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
 	  private, unbindable, rshared, rslave, rprivate, and runbindable.
@@ -689,11 +691,11 @@ config BUSYBOX_CONFIG_PIVOT_ROOT
 	default y
 	help
 	  The pivot_root utility swaps the mount points for the root filesystem
-	  with some other mounted filesystem.  This allows you to do all sorts
+	  with some other mounted filesystem. This allows you to do all sorts
 	  of wild and crazy things with your Linux system and is far more
 	  powerful than 'chroot'.
 
-	  Note: This is for initrd in linux 2.4.  Under initramfs (introduced
+	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
 	  in linux 2.6) use switch_root instead.
 
 config BUSYBOX_CONFIG_RDATE
@@ -705,6 +707,12 @@ config BUSYBOX_CONFIG_RDATE
 	  the RFC868 protocol, which is built into the inetd daemon on most
 	  systems.
 
+config BUSYBOX_CONFIG_RDEV
+       bool "rdev"
+       default n
+       help
+	  Print the device node associated with the filesystem mounted at '/'.
+
 config BUSYBOX_CONFIG_READPROFILE
 	bool "readprofile"
 	default n
@@ -728,7 +736,7 @@ config BUSYBOX_CONFIG_SETARCH
 	default n
 	help
 	  The linux32 utility is used to create a 32bit environment for the
-	  specified program (usually a shell).  It only makes sense to have
+	  specified program (usually a shell). It only makes sense to have
 	  this util on a system that supports both 64bit and 32bit userland
 	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 
@@ -738,9 +746,9 @@ config BUSYBOX_CONFIG_SWAPONOFF
 	help
 	  This option enables both the 'swapon' and the 'swapoff' utilities.
 	  Once you have created some swap space using 'mkswap', you also need
-	  to enable your swap space with the 'swapon' utility.  The 'swapoff'
+	  to enable your swap space with the 'swapon' utility. The 'swapoff'
 	  utility is used, typically at system shutdown, to disable any swap
-	  space.  If you are not using any swap space, you can leave this
+	  space. If you are not using any swap space, you can leave this
 	  option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
@@ -755,28 +763,28 @@ config BUSYBOX_CONFIG_SWITCH_ROOT
 	default y
 	help
 	  The switch_root utility is used from initramfs to select a new
-	  root device.  Under initramfs, you have to use this instead of
-	  pivot_root.  (Stop reading here if you don't care why.)
+	  root device. Under initramfs, you have to use this instead of
+	  pivot_root. (Stop reading here if you don't care why.)
 
 	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-	  (which is a variant of ramfs/tmpfs).  Because rootfs can't be moved
-	  or unmounted*, pivot_root will not work from initramfs.  Instead,
+	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+	  or unmounted*, pivot_root will not work from initramfs. Instead,
 	  switch_root deletes everything out of rootfs (including itself),
 	  does a mount --move that overmounts rootfs with the new root, and
 	  then execs the specified init program.
 
 	  * Because the Linux kernel uses rootfs internally as the starting
 	  and ending point for searching through the kernel's doubly linked
-	  list of active mount points.  That's why.
+	  list of active mount points. That's why.
 
 config BUSYBOX_CONFIG_UMOUNT
 	bool "umount"
 	default y
 	help
-	  When you want to remove a mounted filesystem from its current mount point,
-	  for example when you are shutting down the system, the 'umount' utility is
-	  the tool to use.  If you enabled the 'mount' utility, you almost certainly
-	  also want to enable 'umount'.
+	  When you want to remove a mounted filesystem from its current mount
+	  point, for example when you are shutting down the system, the
+	  'umount' utility is the tool to use. If you enabled the 'mount'
+	  utility, you almost certainly also want to enable 'umount'.
 
 config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
 	bool "Support option -a"
@@ -794,10 +802,11 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 	help
 	  Enabling this feature allows automatic mounting of files (containing
-	  filesystem images) via the linux kernel's loopback devices.  The mount
-	  command will detect you are trying to mount a file instead of a block
-	  device, and transparently associate the file with a loopback device.
-	  The umount command will also free that loopback device.
+	  filesystem images) via the linux kernel's loopback devices.
+	  The mount command will detect you are trying to mount a file instead
+	  of a block device, and transparently associate the file with a
+	  loopback device. The umount command will also free that loopback
+	  device.
 
 	  You can still use the 'losetup' utility (to manually associate files
 	  with loop devices) if you need to do something advanced, such as
@@ -811,9 +820,9 @@ config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 	select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 	help
 	  Historically, Unix systems kept track of the currently mounted
-	  partitions in the file "/etc/mtab".  These days, the kernel exports
+	  partitions in the file "/etc/mtab". These days, the kernel exports
 	  the list of currently mounted partitions in "/proc/mounts", rendering
-	  the old mtab file obsolete.  (In modern systems, /etc/mtab should be
+	  the old mtab file obsolete. (In modern systems, /etc/mtab should be
 	  a symlink to /proc/mounts.)
 
 	  The only reason to have mount maintain an /etc/mtab file itself is if
@@ -823,7 +832,7 @@ config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 	  features like separate per-process filesystem namespaces, requires
 	  that your /etc directory be writeable, tends to get easily confused
 	  by --bind or --move mounts, won't update if you rename a directory
-	  that contains a mount point, and so on.  (In brief: avoid.)
+	  that contains a mount point, and so on. (In brief: avoid.)
 
 	  About the only reason to use this is if you've removed /proc from
 	  your kernel.