remove the old broadcom wl driver for linux 2.4

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21947 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 372 deletions

diff --git a/package/broadcom-wl-old/files/lib/wifi/broadcom.sh b/package/broadcom-wl-old/files/lib/wifi/broadcom.sh
deleted file mode 100644
index 976665cb0..000000000
--- a/package/broadcom-wl-old/files/lib/wifi/broadcom.sh
+++ /dev/null
@@ -1,372 +0,0 @@
-append DRIVERS "broadcom"
-
-scan_broadcom() {
-	local device="$1"
-	local wds
-	local adhoc sta apmode mon
-	local adhoc_if sta_if ap_if mon_if
-	local _c=0
-
-	config_get vifs "$device" vifs
-	for vif in $vifs; do
-		config_get mode "$vif" mode
-		_c=$(($_c + 1))
-		case "$mode" in
-			adhoc)
-				adhoc=1
-				adhoc_if="$vif"
-			;;
-			sta)
-				sta=1
-				sta_if="$vif"
-			;;
-			ap)
-				apmode=1
-				ap_if="${ap_if:+$ap_if }$vif"
-			;;
-			wds)
-				config_get addr "$vif" bssid
-				[ -z "$addr" ] || {
-					addr=$(echo "$addr" | tr 'A-F' 'a-f')
-					append wds "$addr"
-				}
-			;;
-			monitor)
-				mon=1
-				mon_if="$vif"
-			;;
-			*) echo "$device($vif): Invalid mode";;
-		esac
-	done
-	config_set "$device" wds "$wds"
-
-	local _c=
-	for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
-		config_set "$vif" ifname "${device}${_c:+.$_c}"
-		_c=$((${_c:-0} + 1))
-	done
-	config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
-
-	ifdown="down"
-	for vif in 0 1 2 3; do
-		append ifdown "vif $vif" "$N"
-		append ifdown "enabled 0" "$N"
-	done
-
-	ap=1
-	infra=1
-	if [ "$_c" -gt 1 ]; then
-		mssid=1
-	else
-		mssid=
-	fi
-	apsta=0
-	radio=1
-	monitor=0
-	passive=0
-	case "$adhoc:$sta:$apmode:$mon" in
-		1*)
-			ap=0
-			mssid=
-			infra=0
-		;;
-		:1:1:)
-			apsta=1
-			wet=1
-		;;
-		:1::)
-			wet=1
-			ap=0
-			mssid=
-		;;
-		:::1)
-			wet=1
-			ap=0
-			mssid=
-			monitor=1
-			passive=1
-		;;
-		::)
-			radio=0
-		;;
-	esac
-}
-
-disable_broadcom() {
-	local device="$1"
-	set_wifi_down "$device"
-	wlc ifname "$device" down
-	(
-		include /lib/network
-
-		# make sure the interfaces are down and removed from all bridges
-		for dev in $device ${device}.1 ${device}.2 ${device}.3; do
-			ifconfig "$dev" down 2>/dev/null >/dev/null && {
-				unbridge "$dev"
-			}
-		done
-	)
-	true
-}
-
-enable_broadcom() {
-	local device="$1"
-	local _c
-	config_get channel "$device" channel
-	config_get country "$device" country
-	config_get maxassoc "$device" maxassoc
-	config_get wds "$device" wds
-	config_get vifs "$device" vifs
-	config_get distance "$device" distance
-	config_get slottime "$device" slottime
-	config_get rxantenna "$device" rxantenna
-	config_get txantenna "$device" txantenna
-	config_get_bool frameburst "$device" frameburst
-	config_get macfilter "$device" macfilter
-	config_get maclist "$device" maclist
-	config_get macaddr "$device" macaddr
-	config_get txpower "$device" txpower
-	config_get frag "$device" frag
-	config_get rts "$device" rts
-	config_get hwmode "$device" hwmode
-	local vif_pre_up vif_post_up vif_do_up vif_txpower
-	local doth=0
-	local wmm=0
-
-	_c=0
-	nas="$(which nas)"
-	nas_cmd=
-	if_up=
-
-	[ -z "$slottime" ] && {
-		[ -n "$distance" ] && {
-			# slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
-			slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
-		}
-	} || {
-		slottime="${slottime:--1}"
-	}
-
-	case "$macfilter" in
-		allow|2)
-			macfilter=2;
-		;;
-		deny|1)
-			macfilter=1;
-		;;
-		disable|none|0)
-			macfilter=0;
-		;;
-	esac
-
-	case "$hwmode" in
-		*b)   hwmode=0;;
-		*bg)  hwmode=1;;
-		*g)   hwmode=2;;
-		*gst) hwmode=4;;
-		*lrs) hwmode=5;;
-		*)    hwmode=1;;
-	esac
-
-	for vif in $vifs; do
-		config_get vif_txpower "$vif" txpower
-
-		config_get mode "$vif" mode
-		append vif_pre_up "vif $_c" "$N"
-		append vif_post_up "vif $_c" "$N"
-		append vif_do_up "vif $_c" "$N"
-
-		config_get_bool wmm "$vif" wmm "$wmm"
-		config_get_bool doth "$vif" doth "$doth"
-
-		[ "$mode" = "sta" ] || {
-			config_get_bool hidden "$vif" hidden 0
-			append vif_pre_up "closed $hidden" "$N"
-			config_get_bool isolate "$vif" isolate 0
-			append vif_pre_up "ap_isolate $isolate" "$N"
-		}
-
-		wsec_r=0
-		eap_r=0
-		wsec=0
-		auth=0
-		nasopts=
-		config_get enc "$vif" encryption
-		case "$enc" in
-			*WEP*|*wep*)
-				wsec_r=1
-				wsec=1
-				defkey=1
-				config_get key "$vif" key
-				case "$enc" in
-					*shared*) append vif_do_up "wepauth 1" "$N";;
-					*) append vif_do_up "wepauth 0" "$N";;
-				esac
-				case "$key" in
-					[1234])
-						defkey="$key"
-						for knr in 1 2 3 4; do
-							config_get k "$vif" key$knr
-							[ -n "$k" ] || continue
-							[ "$defkey" = "$knr" ] && def="=" || def=""
-							append vif_do_up "wepkey $def$knr,$k" "$N"
-						done
-					;;
-					"");;
-					*) append vif_do_up "wepkey =1,$key" "$N";;
-				esac
-			;;
-			*psk*|*PSK*)
-				wsec_r=1
-				config_get key "$vif" key
-				case "$enc" in
-					wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
-					wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
-					*aes|*AES) auth=4; wsec=4;;
-					*) auth=4; wsec=2;;
-				esac
-				eval "${vif}_key=\"\$key\""
-				nasopts="-k \"\$${vif}_key\""
-			;;
-			*wpa*|*WPA*)
-				wsec_r=1
-				eap_r=1
-				config_get key "$vif" key
-				config_get server "$vif" server
-				config_get port "$vif" port
-				case "$enc" in
-					wpa*+wpa2*|WPA*+WPA2*) auth=66; wsec=6;;
-					wpa2*|WPA2*) auth=64; wsec=4;;
-					*) auth=2; wsec=2;;
-				esac
-				eval "${vif}_key=\"\$key\""
-				nasopts="-r \"\$${vif}_key\" -h $server -p ${port:-1812}"
-			;;
-		esac
-		append vif_do_up "wsec $wsec" "$N"
-		append vif_do_up "wpa_auth $auth" "$N"
-		append vif_do_up "wsec_restrict $wsec_r" "$N"
-		append vif_do_up "eap_restrict $eap_r" "$N"
-
-		config_get ssid "$vif" ssid
-		append vif_post_up "vlan_mode 0" "$N"
-		append vif_post_up "ssid $ssid" "$N"
-		append vif_do_up "ssid $ssid" "$N"
-
-		[ "$mode" = "monitor" ] && {
-			append vif_post_up "monitor $monitor" "$N"
-			append vif_post_up "passive $passive" "$N"
-		}
-
-		[ "$mode" = "adhoc" ] && {
-			config_get bssid "$vif" bssid
-			[ -n "$bssid" ] && {
-				append vif_pre_up "des_bssid $bssid" "$N"
-				append vif_pre_up "allow_mode 1" "$N"
-			}
-		} || append vif_pre_up "allow_mode 0" "$N"
-
-		append vif_post_up "enabled 1" "$N"
-
-		config_get ifname "$vif" ifname
-		#append if_up "ifconfig $ifname up" ";$N"
-
-		local net_cfg bridge
-		net_cfg="$(find_net_config "$vif")"
-		[ -z "$net_cfg" ] || {
-			bridge="$(bridge_interface "$net_cfg")"
-			append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
-			append if_up "start_net '$ifname' '$net_cfg' \$(wlc ifname '$ifname' bssid)" ";$N"
-		}
-		[ -z "$nasopts" ] || {
-			eval "${vif}_ssid=\"\$ssid\""
-			nas_mode="-A"
-			use_nas=1
-			[ "$mode" = "sta" ] && {
-				nas_mode="-S"
-				[ -z "$bridge" ] || {
-					append vif_post_up "supplicant 1" "$N"
-					append vif_post_up "passphrase $key" "$N"
-
-					use_nas=0
-				}
-			}
-			[ -z "$nas" -o "$use_nas" = "0" ] || {
-				nas_cmd="${nas_cmd:+$nas_cmd$N}start-stop-daemon -S -b -p /var/run/nas.$ifname.pid -x $nas -- -P /var/run/nas.$ifname.pid -H 34954 ${bridge:+ -l $bridge} -i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 $nasopts"
-			}
-		}
-		_c=$(($_c + 1))
-	done
-	killall -KILL nas >&- 2>&-
-	wlc ifname "$device" stdin <<EOF
-$ifdown
-
-gmode ${hwmode:-1}
-apsta $apsta
-ap $ap
-${mssid:+mssid $mssid}
-infra $infra
-${wet:+wet 1}
-802.11d 0
-802.11h ${doth:-0}
-wme ${wmm:-0}
-rxant ${rxantenna:-3}
-txant ${txantenna:-3}
-fragthresh ${frag:-2346}
-rtsthresh ${rts:-2347}
-monitor ${monitor:-0}
-passive ${passive:-0}
-
-radio ${radio:-1}
-macfilter ${macfilter:-0}
-maclist ${maclist:-none}
-wds none
-${wds:+wds $wds}
-country ${country:-IL0}
-${channel:+channel $channel}
-maxassoc ${maxassoc:-128}
-slottime ${slottime:--1}
-${frameburst:+frameburst $frameburst}
-
-$vif_pre_up
-up
-$vif_post_up
-EOF
-	eval "$if_up"
-	wlc ifname "$device" stdin <<EOF
-$vif_do_up
-EOF
-
-	# use vif_txpower (from last wifi-iface) instead of txpower (from
-	# wifi-device) if the latter does not exist
-	txpower=${txpower:-$vif_txpower}
-	[ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
-
-	eval "$nas_cmd"
-}
-
-
-detect_broadcom() {
-	local i=-1
-
-	while [ -f /proc/net/wl$((++i)) ]; do
-		config_get type wl${i} type
-		[ "$type" = broadcom ] && continue
-		cat <<EOF
-config wifi-device  wl${i}
-	option type     broadcom
-	option channel  5
-
-	# REMOVE THIS LINE TO ENABLE WIFI:
-	option disabled 1
-
-config wifi-iface
-	option device   wl${i}
-	option network	lan
-	option mode     ap
-	option ssid     OpenWrt${i#0}
-	option encryption none
-
-EOF
-	done
-}