port wan_device changes from whiterussian to kamikaze

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2993 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 17 insertions, 13 deletions

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
index 27336e112..72d5b63ac 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
@@ -88,10 +88,10 @@ END {
 	print "#   pppoe: PPP over Ethernet"
 	print "#   pptp: Point-to-Point tunneling Protocol"
 	print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-	print "#     and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
 	print ""
 	print "wan_proto=dhcp"
 	p("wan_ifname")
+	print "wan_device=\"" c["wan_ifname"] "\""
 	print "# wan_ipaddr=\"192.168.0.2\""
 	print "# wan_netmask=\"255.255.255.0\""
 	print "# wan_gateway=\"192.168.0.1\""
@@ -99,8 +99,6 @@ END {
 	print ""
 	print "## PPP over Ethernet and PPTP"
 	print "# wan_ifname=\"ppp0\""
-	print "# pppoe_ifname=\"" c["wan_ifname"] "\""
-	print "# pptp_ifname=\"" c["wan_ifname"] "\""
 	print "# pptp_server_ip=\"192.168.0.1\""
 }
 ' > /etc/config/network
diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
index 70fbd4662..a561b3965 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
@@ -107,6 +107,14 @@ case "$(nvram get productid)" in
 		nvram set lan_ifnames="eth1 eth2"
 		nvram set wan_ifname="none"
 	;;
+	*)
+		# wl-500g defaults. these are placed here, because WL-HDD and WL-300g
+		# might have the same nvram settings.
+		[ "$(nvram get boardnum)" = "asusX" \
+		-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+			nvram_default wan_device "eth1"
+		}
+	;;
 esac
 
 # hacks for wap54g hardware
@@ -130,21 +138,12 @@ esac
 	nvram_default wl0id 0x4320
 }
 
-WAN_PROTO="$(nvram get wan_proto)"
-[  "$WAN_PROTO" = "pptp" \
--o "$WAN_PROTO" = "pppoe" ] && {
-	WAN_IFNAME="$(nvram get wan_ifname)"
-	[ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || {
-		nvram set wan_ifname=ppp0
-		nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME"
-	}
-}
-
 # defaults
 nvram_default lan_ifname "br0"
 nvram_default lan_ifnames "$FAILSAFE_ifnames"
 
 nvram_default wan_ifname "vlan1"
+nvram_default wan_device "vlan1"
 nvram_default wan_proto "dhcp"
 
 nvram_default wl0_ssid OpenWrt
@@ -152,6 +151,13 @@ nvram_default wl0_mode ap
 nvram_default wl0_infra 1
 nvram_default wl0_radio 1
 
+WAN_PROTO="$(nvram get wan_proto)"
+WAN_IFNAME="$(nvram get wan_ifname)"
+case "$WAN_PROTO" in
+	pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
+	*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
+esac
+
 [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
 	# if default wifi mac, set two higher than the lan mac
 	nvram set il0macaddr=$(nvram get et0macaddr|