move target/default/target_skeleton into package/base-files, put all the default files in ipkg packages, cleanup some junk in toolchain/, toolchain/ no longer changes build_mipsel/root

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1494 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 0 insertions, 187 deletions

diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S10boot b/openwrt/target/default/target_skeleton/etc/init.d/S10boot
deleted file mode 100755
index 22096d5fb..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S10boot
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-echo "S" > /proc/jffs2_bbc
-
-mkdir -p /var/run
-mkdir -p /var/log
-touch /var/log/wtmp
-touch /var/log/lastlog
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-  # if default wifi mac, set two higher than the lan mac
-  nvram set il0macaddr=$(nvram get et0macaddr|
-  awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
-
-# set up the vlan*ports variables for the asus wl-500g deluxe
-# if they don't already exist 
-[  "$(nvram get boardtype)" = "bcm95365r" \
--a "$(nvram get boardnum)" = "45" \
--a -z "$(nvram get vlan0ports)$(nvram get vlan1ports)" ] && {
-	nvram set vlan0ports="1 2 3 4 5*"
-	nvram set vlan1ports="0 5"
-}
-
-sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
-
-ifconfig lo 127.0.0.1 up
-ifconfig eth0 promisc
-
-HOSTNAME=$(nvram get wan_hostname)
-HOSTNAME=${HOSTNAME%%.*}
-echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
-
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
-
-# automagically run firstboot
-[ -z "$FAILSAFE" ] && {
-	{ mount|grep "on / type jffs2" 1>&-; } || firstboot
-}
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S40network b/openwrt/target/default/target_skeleton/etc/init.d/S40network
deleted file mode 100755
index d8b4e4125..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S40network
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/sh
-case "$1" in
-  start|restart)
-    ifup lan
-    ifup wan
-    ifup wifi
-    wifi up
-
-    for route in $(nvram get static_route); do {
-      eval "set $(echo $route | sed 's/:/ /g')"
-      $DEBUG route add -net $1 netmask $2 gw $3 metric $4 dev $5
-    } done
-    ;;
-esac
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S45firewall b/openwrt/target/default/target_skeleton/etc/init.d/S45firewall
deleted file mode 100755
index 8350ccbfe..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S45firewall
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-## Please make changes in /etc/firewall.user
-
-. /etc/functions.sh
-WAN=$(nvram get wan_ifname)
-LAN=$(nvram get lan_ifname)
-
-## CLEAR TABLES
-for T in filter nat mangle; do
-  iptables -t $T -F
-  iptables -t $T -X
-done
-
-iptables -N input_rule
-iptables -N output_rule
-iptables -N forwarding_rule
-
-iptables -t nat -N prerouting_rule
-iptables -t nat -N postrouting_rule
-
-### INPUT
-###  (connections with the router as destination)
-
-  # base case
-  iptables -P INPUT DROP
-  iptables -A INPUT -m state --state INVALID -j DROP
-  iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-  iptables -A INPUT -p tcp --tcp-flags SYN SYN --tcp-option \! 2 -j  DROP
-
-  #
-  # insert accept rule or to jump to new accept-check table here
-  #
-  iptables -A INPUT -j input_rule
-
-  # allow
-  iptables -A INPUT -i \! $WAN	-j ACCEPT	# allow from lan/wifi interfaces 
-  iptables -A INPUT -p icmp	-j ACCEPT	# allow ICMP
-  iptables -A INPUT -p gre	-j ACCEPT	# allow GRE
-
-  # reject (what to do with anything not allowed earlier)
-  iptables -A INPUT -p tcp -j REJECT --reject-with tcp-reset
-  iptables -A INPUT -j REJECT --reject-with icmp-port-unreachable
-
-### OUTPUT
-### (connections with the router as source)
-
-  # base case
-  iptables -P OUTPUT DROP
-  iptables -A OUTPUT -m state --state INVALID -j DROP
-  iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-
-  #
-  # insert accept rule or to jump to new accept-check table here
-  #
-  iptables -A OUTPUT -j output_rule
-
-  # allow
-  iptables -A OUTPUT -j ACCEPT		#allow everything out
-
-  # reject (what to do with anything not allowed earlier)
-  iptables -A OUTPUT -p tcp -j REJECT --reject-with tcp-reset
-  iptables -A OUTPUT -j REJECT --reject-with icmp-port-unreachable
-
-### FORWARDING
-### (connections routed through the router)
-
-  # base case
-  iptables -P FORWARD DROP 
-  iptables -A FORWARD -m state --state INVALID -j DROP
-  iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-  iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-
-  #
-  # insert accept rule or to jump to new accept-check table here
-  #
-  iptables -A FORWARD -j forwarding_rule
-
-  # allow
-  iptables -A FORWARD -i br0 -o br0 -j ACCEPT
-  iptables -A FORWARD -i $LAN -o $WAN -j ACCEPT
-
-  # reject (what to do with anything not allowed earlier)
-  # uses the default -P DROP
-
-### MASQ
-  iptables -t nat -A PREROUTING -j prerouting_rule
-  iptables -t nat -A POSTROUTING -j postrouting_rule
-  iptables -t nat -A POSTROUTING -o $WAN -j MASQUERADE
-
-## USER RULES
-[ -f /etc/firewall.user ] && . /etc/firewall.user
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S50dnsmasq b/openwrt/target/default/target_skeleton/etc/init.d/S50dnsmasq
deleted file mode 100755
index 6a5af0f05..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S50dnsmasq
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-. /etc/functions.sh
-
-# interface to use for DHCP
-iface=lan
-
-ifname=$(nvram get ${iface}_ifname)
-ipaddr=$(nvram get ${iface}_ipaddr)
-netmask=$(nvram get ${iface}_netmask)
-
-(
-	# check for existing DHCP server
-	udhcpc -n -q -R -s /dev/zero -i $ifname >&- || {
-
-	  ipaddr=$(ip2int $ipaddr)
-	  netmask=$(ip2int ${netmask:-255.255.255.0})
-	  network=$((ipaddr&netmask))
-	  
-	  start=$(nvram get dhcp_start)
-	  start=$((network+${start:-100}))
-	  end=$(nvram get dhcp_num)
-	  end=$((start+${end:-150}))
-	  
-	  args="-l /tmp/dhcp.leases -K -F $(int2ip $start),$(int2ip $end),$(int2ip $netmask),12h"
-	}
-	dnsmasq ${args}
-) &
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S50httpd b/openwrt/target/default/target_skeleton/etc/init.d/S50httpd
deleted file mode 100755
index 9cf551e5c..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S50httpd
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-httpd -p 80 -h /www -r WRT54G Router
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S50telnet b/openwrt/target/default/target_skeleton/etc/init.d/S50telnet
deleted file mode 100755
index 599c3540e..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S50telnet
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-telnetd -l /bin/login
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/S99done b/openwrt/target/default/target_skeleton/etc/init.d/S99done
deleted file mode 100755
index ce6033721..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/S99done
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-# set leds to normal state
-echo "0x00" > /proc/sys/diag
-sysctl -p >&-
diff --git a/openwrt/target/default/target_skeleton/etc/init.d/rcS b/openwrt/target/default/target_skeleton/etc/init.d/rcS
deleted file mode 100755
index e6daddc59..000000000
--- a/openwrt/target/default/target_skeleton/etc/init.d/rcS
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-syslogd -C 16
-klogd
-${FAILSAFE:+telnetd -l /bin/login; ifup lan; exit}
-
-for i in /etc/init.d/S*; do
-  $i start 2>&1
-done | logger -s -p 6 -t '' &