I do not believe that users will cleanup kernelsource, when switching

rootfs. force it with scripts and Makefile changes from Felix Fietkau <nbd@vd-s.ath.cx>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@290 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 65 insertions, 0 deletions

diff --git a/openwrt/scripts/configtest.pl b/openwrt/scripts/configtest.pl
new file mode 100755
index 000000000..61fe8a7b6
--- /dev/null
+++ b/openwrt/scripts/configtest.pl
@@ -0,0 +1,11 @@
+#!/usr/bin/perl
+
+my %change = (
+	'ROOTFS' => 'make linux-dirclean'
+);
+
+foreach my $change (keys %change) {
+	my $v1 = `grep '$change' .config.test`;
+	my $v2 = `grep '$change' .config`;
+	$v1 eq $v2 or system($change{$change});
+}
diff --git a/openwrt/scripts/flash.sh b/openwrt/scripts/flash.sh
new file mode 100644
index 000000000..aedb25072
--- /dev/null
+++ b/openwrt/scripts/flash.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+
+# flash script for linksys and asus routers 
+#
+# Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
+# Copyright (C) 2005 by Waldemar Brodkorb <wbx@dass-it.de>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
+    echo Usage: $0 firmware vendor
+cat << EOF
+IMPORTANT:
+Notes for Linksys Routers: 
+   be sure you have set boot_wait to yes. Power on your router
+   after executing this script.
+   Use openwrt-gs-code.bin or openwrt-g-code.bin as firmware.
+ 
+Notes for Asus Routers:
+   be sure POWER led is flashing (If this is not a case
+   poweroff the device, push the reset button & power on
+   it again, then release button)
+   Use openwrt-linux.trx as firmware.
+
+1) connect your pc to the LAN port
+2) be sure your link is up and has an address in the
+   192.168.1.0/24 address range (and not the 192.168.1.1)
+EOF
+    exit 0
+fi
+if [ "$2" == "asus" ]; then
+echo Confirming IP address setting...
+echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
+echo Flashing 192.168.1.1 using $1...
+echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
+echo Please wait until leds stops flashing. 
+elif [ "$2" == "linksys" ]; then
+echo Flashing 192.168.1.1 using $1...
+echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
+echo Please wait until power led stops flashing. Then you can login via telnet 192.168.1.1
+fi