diff options
author | wbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-12-25 01:04:46 +0000 |
---|---|---|
committer | wbx <wbx@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-12-25 01:04:46 +0000 |
commit | 70a0737d444b2fa0684c323f98cbdda854633544 (patch) | |
tree | 6bb0dca164737b4a05634a10a88291d5e3fac2a2 /openwrt/scripts | |
parent | 3b44beac3c33cd614cd3b2ec71650cb5a334867c (diff) |
add toshiba tftp commands
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2766 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'openwrt/scripts')
-rw-r--r-- | openwrt/scripts/flash.sh | 24 |
1 files changed, 19 insertions, 5 deletions
diff --git a/openwrt/scripts/flash.sh b/openwrt/scripts/flash.sh index e71108690..8841c3568 100644 --- a/openwrt/scripts/flash.sh +++ b/openwrt/scripts/flash.sh @@ -1,9 +1,9 @@ #!/bin/bash - -# flash script for linksys and asus routers +# +# tftp flash script for wireless routers # # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su> -# Copyright (C) 2005 by Waldemar Brodkorb <wbx@dass-it.de> +# Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -24,11 +24,11 @@ if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then echo Usage: $0 firmware vendor cat << EOF IMPORTANT: -Notes for Linksys router: +Notes for Linksys / Asus WL500gx router: be sure you have set boot_wait to yes. Power on your router after executing this script. -Notes for Asus router: +Notes for Asus WL500g router: be sure POWER led is flashing (If this is not the case poweroff the device, push the reset button & power on it again, then release button) @@ -36,6 +36,16 @@ Notes for Asus router: 1) connect your pc to the LAN port 2) be sure your link is up and has an address in the 192.168.1.0/24 address range (and not the 192.168.1.1) + +Notes for Toshiba router: + boot_wait is enabled by default on these units. + +1) connect your pc to any of the four LAN ports +2) be sure your link is up and has an address in the + 192.168.10.1/24 address range (and not the 192.168.10.1) +3) run this script (unit will only accept .trx images) +4) Turn unit power on. + EOF exit 0 fi @@ -49,4 +59,8 @@ elif [ "$2" == "linksys" ]; then echo Flashing 192.168.1.1 using $1... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. +elif [ "$2" == "toshiba" ]; then +echo Flashing 192.168.10.1 using $1... +echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 +echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. fi |