diff options
author | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-07-21 11:45:36 +0000 |
---|---|---|
committer | nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2005-07-21 11:45:36 +0000 |
commit | dba6e9388f105f78f3ec6448f6456e9368266a9a (patch) | |
tree | c7e4e5abb560ab0ba739d5cb144b6848ff85fcec /openwrt/package | |
parent | b3c393cfc49f0769e199ddacbce9d726a1408b91 (diff) |
move nvram,jffs2root,shared libs into target/linux/package and make them broadcom-specific
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1517 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'openwrt/package')
29 files changed, 2 insertions, 5856 deletions
diff --git a/openwrt/package/Makefile b/openwrt/package/Makefile index 8a5448166..0d4d75ebf 100644 --- a/openwrt/package/Makefile +++ b/openwrt/package/Makefile @@ -2,7 +2,6 @@ include $(TOPDIR)/rules.mk package-:=tcp_wrappers -package-y:=openwrt package-$(BR2_PACKAGE_AICCU) += aiccu package-$(BR2_PACKAGE_AMWALL) += amwall package-$(BR2_PACKAGE_ARPTABLES) += arptables @@ -201,7 +200,7 @@ tinc-compile: zlib-compile openssl-compile lzo-compile tor-compile: libevent-compile openssl-compile zlib-compile usbutils-compile: libusb-compile vtun-compile: zlib-compile openssl-compile lzo-compile -wificonf-compile: openwrt-compile wireless-tools-compile +wificonf-compile: wireless-tools-compile wpa_supplicant-compile: openssl-compile asterisk-compile: ncurses-compile openssl-compile @@ -280,7 +279,7 @@ ifneq ($(BR2_PACKAGE_ULOGD_PGSQL),) ulogd-compile: postgresql-compile endif -sdk-compile: $(DEV_LIBS_COMPILE) $(SDK_DEFAULT_COMPILE) openwrt-install +sdk-compile: $(DEV_LIBS_COMPILE) $(SDK_DEFAULT_COMPILE) $(STAMP_DIR): mkdir -p $@ diff --git a/openwrt/package/openwrt/Makefile b/openwrt/package/openwrt/Makefile deleted file mode 100644 index 580777a17..000000000 --- a/openwrt/package/openwrt/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME := openwrt-utils -PKG_RELEASE := 2 -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) -PKG_IPK:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_RELEASE)_$(ARCH).ipk -PKG_IPK_DIR:=$(PKG_BUILD_DIR)/ipkg - -SHARED_INCLUDE:=${shell pwd}/include - -libshared-compile libnvram-compile: - @$(MAKE) -C $(patsubst %-compile,%,$@) compile - -libshared-install libnvram-install: libshared-compile libnvram-compile - @$(MAKE) -C $(patsubst %-install,%,$@) install - -libshared-clean libnvram-clean: - @$(MAKE) -C $(patsubst %-clean,%,$@) clean - -$(PKG_IPK_DIR)/sbin/jffs2root: jffs2root.c - mkdir -p $(PKG_IPK_DIR)/sbin - $(TARGET_CC) -o $@ $< - -$(PKG_IPK): $(PKG_IPK_DIR)/sbin/jffs2root - $(SCRIPT_DIR)/make-ipkg-dir.sh $(PKG_IPK_DIR) $(PKG_NAME).control $(PKG_RELEASE) $(ARCH) - $(STRIP) $(PKG_IPK_DIR)/sbin/* - mkdir -p $(PACKAGE_DIR) - $(IPKG_BUILD) $(PKG_IPK_DIR) $(PACKAGE_DIR) - -$(IPKG_STATE_DIR)/info/$(PKG_NAME).list: $(PKG_IPK) - $(IPKG) install $< - -source: -prepare: -compile: prepare libnvram-compile libshared-compile $(PKG_IPK) $(PKG_WLCOMPAT) - mkdir -p $(STAGING_DIR)/usr/include - cp -a ./include/* $(STAGING_DIR)/usr/include/ -install: libnvram-install libshared-install \ - $(IPKG_STATE_DIR)/info/$(PKG_NAME).list \ - -clean: libshared-clean libnvram-clean - rm -rf $(PKG_BUILD_DIR) - rm -f $(PKG_IPK) diff --git a/openwrt/package/openwrt/include/bcmnvram.h b/openwrt/package/openwrt/include/bcmnvram.h deleted file mode 100644 index 3c452634e..000000000 --- a/openwrt/package/openwrt/include/bcmnvram.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * NVRAM variable manipulation - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _bcmnvram_h_ -#define _bcmnvram_h_ - -#ifndef _LANGUAGE_ASSEMBLY - -#include <typedefs.h> - -struct nvram_header { - uint32 magic; - uint32 len; - uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ - uint32 config_refresh; /* 0:15 config, 16:31 refresh */ - uint32 config_ncdl; /* ncdl values for memc */ -}; - -struct nvram_tuple { - char *name; - char *value; - struct nvram_tuple *next; -}; - -/* - * Initialize NVRAM access. May be unnecessary or undefined on certain - * platforms. - */ -extern int nvram_init(void *sbh); - -/* - * Disable NVRAM access. May be unnecessary or undefined on certain - * platforms. - */ -extern void nvram_exit(void); - -/* - * Get the value of an NVRAM variable. The pointer returned may be - * invalid after a set. - * @param name name of variable to get - * @return value of variable or NULL if undefined - */ -extern char * nvram_get(const char *name); - -/* - * Get the value of an NVRAM variable. - * @param name name of variable to get - * @return value of variable or NUL if undefined - */ -#define nvram_safe_get(name) (nvram_get(name) ? : "") - -#define nvram_safe_unset(name) ({ \ - if(nvram_get(name)) \ - nvram_unset(name); \ -}) - -#define nvram_safe_set(name, value) ({ \ - if(!nvram_get(name) || strcmp(nvram_get(name), value)) \ - nvram_set(name, value); \ -}) - -/* - * Match an NVRAM variable. - * @param name name of variable to match - * @param match value to compare against value of variable - * @return TRUE if variable is defined and its value is string equal - * to match or FALSE otherwise - */ -static INLINE int -nvram_match(char *name, char *match) { - const char *value = nvram_get(name); - return (value && !strcmp(value, match)); -} - -/* - * Inversely match an NVRAM variable. - * @param name name of variable to match - * @param match value to compare against value of variable - * @return TRUE if variable is defined and its value is not string - * equal to invmatch or FALSE otherwise - */ -static INLINE int -nvram_invmatch(char *name, char *invmatch) { - const char *value = nvram_get(name); - return (value && strcmp(value, invmatch)); -} - -/* - * Set the value of an NVRAM variable. The name and value strings are - * copied into private storage. Pointers to previously set values - * may become invalid. The new value may be immediately - * retrieved but will not be permanently stored until a commit. - * @param name name of variable to set - * @param value value of variable - * @return 0 on success and errno on failure - */ -extern int nvram_set(const char *name, const char *value); - -/* - * Unset an NVRAM variable. Pointers to previously set values - * remain valid until a set. - * @param name name of variable to unset - * @return 0 on success and errno on failure - * NOTE: use nvram_commit to commit this change to flash. - */ -extern int nvram_unset(const char *name); - -/* - * Commit NVRAM variables to permanent storage. All pointers to values - * may be invalid after a commit. - * NVRAM values are undefined after a commit. - * @return 0 on success and errno on failure - */ -extern int nvram_commit(void); - -/* - * Get all NVRAM variables (format name=value\0 ... \0\0). - * @param buf buffer to store variables - * @param count size of buffer in bytes - * @return 0 on success and errno on failure - */ -extern int nvram_getall(char *buf, int count); - -extern int file2nvram(char *filename, char *varname); -extern int nvram2file(char *varname, char *filename); - -#endif /* _LANGUAGE_ASSEMBLY */ - -#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ -#define NVRAM_VERSION 1 -#define NVRAM_HEADER_SIZE 20 -#define NVRAM_SPACE 0x8000 -#define FLASH_BASE 0xbfc00000 /* Extif core */ -#define FLASH_MIN 0x00100000 /* Minimum flash size */ -#define FLASH_MAX 0x00400000 /* Maximum flash size with extif */ - -#endif /* _bcmnvram_h_ */ diff --git a/openwrt/package/openwrt/include/bcmutils.h b/openwrt/package/openwrt/include/bcmutils.h deleted file mode 100644 index 05ad41d9d..000000000 --- a/openwrt/package/openwrt/include/bcmutils.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Misc useful os-independent macros and functions. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id$ - */ - -#ifndef _bcmutils_h_ -#define _bcmutils_h_ - -#ifndef MIN -#define MIN(a, b) (((a)<(b))?(a):(b)) -#endif - -#ifndef MAX -#define MAX(a, b) (((a)>(b))?(a):(b)) -#endif - -#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) -#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) -#define ISPOWEROF2(x) ((((x)-1)&(x))==0) -#define OFFSETOF(type, member) ((uint) &((type *)0)->member) -#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) - -/* bit map related macros */ -#ifndef setbit -#define NBBY 8 /* 8 bits per byte */ -#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) -#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) -#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -#endif - -#define NBITS(type) (sizeof (type) * 8) - -#define _BCM_U 0x01 /* upper */ -#define _BCM_L 0x02 /* lower */ -#define _BCM_D 0x04 /* digit */ -#define _BCM_C 0x08 /* cntrl */ -#define _BCM_P 0x10 /* punct */ -#define _BCM_S 0x20 /* white space (space/lf/tab) */ -#define _BCM_X 0x40 /* hex digit */ -#define _BCM_SP 0x80 /* hard space (0x20) */ - -extern unsigned char bcm_ctype[]; -#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) - -#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) -#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) -#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) -#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) -#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) -#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) -#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) -#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) -#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) -#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) -#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) - -/* - * Spin at most 'us' microseconds while 'exp' is true. - * Caller should explicitly test 'exp' when this completes - * and take appropriate error action if 'exp' is still true. - */ -#define SPINWAIT(exp, us) { \ - uint countdown = (us) + 9; \ - while ((exp) && (countdown >= 10)) {\ - OSL_DELAY(10); \ - countdown -= 10; \ - } \ -} - -/* generic osl packet queue */ -struct pktq { - void *head; /* first packet to dequeue */ - void *tail; /* last packet to dequeue */ - uint len; /* number of queued packets */ - uint maxlen; /* maximum number of queued packets */ - bool priority; /* enqueue by packet priority */ -}; -#define DEFAULT_QLEN 128 - -#define pktq_len(q) ((q)->len) -#define pktq_avail(q) ((q)->maxlen - (q)->len) -#define pktq_head(q) ((q)->head) -#define pktq_full(q) ((q)->len >= (q)->maxlen) - -/* crc defines */ -#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ - -/* tag_ID/length/value_buffer tuple */ -typedef struct bcm_tlv { - uint8 id; - uint8 len; - uint8 data[1]; -} bcm_tlv_t; - -/* Check that bcm_tlv_t fits into the given buflen */ -#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len) - -/* buffer length for ethernet address from bcm_ether_ntoa() */ -#define ETHER_ADDR_STR_LEN 18 - -/* -* load 32-bit value from unaligned byte array -*/ -#ifdef IL_BIGENDIAN -#define load32_ua(a) ((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \ - (((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3]) -#else -#define load32_ua(a) ((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \ - (((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0]) -#endif - -/* externs */ -extern uint bcm_atoi(char *s); -extern uchar bcm_toupper(uchar c); -extern ulong bcm_strtoul(char *cp, char **endp, uint base); -extern void deadbeef(char *p, uint len); -extern void prhex(char *msg, uchar *buf, uint len); -extern void prpkt(char *msg, void *drv, void *p0); -extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); -extern uint pkttotlen(void *drv, void *); -extern uchar *bcm_ether_ntoa(char *ea, char *buf); -extern int bcm_ether_atoe(char *p, char *ea); -extern void bcm_mdelay(uint ms); -extern char *getvar(char *vars, char *name); -extern int getintvar(char *vars, char *name); -extern char *bcmstrstr(char *haystack, char *needle); - -extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); -extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); -extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); -extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); -extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); -extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); -extern void pktq_init(struct pktq *q, uint maxlen, bool priority); -extern bool pktenq(struct pktq *q, void *p, bool lifo); -extern void *pktdeq(struct pktq *q); - -#define bcmlog(fmt, a1, a2) -#define bcmdumplog(buf, size) *buf = '\0' -#define bcmdumplogent(buf, idx) -1 - -#endif /* _bcmutils_h_ */ diff --git a/openwrt/package/openwrt/include/cy_conf.h b/openwrt/package/openwrt/include/cy_conf.h deleted file mode 100644 index dbe387b83..000000000 --- a/openwrt/package/openwrt/include/cy_conf.h +++ /dev/null @@ -1,69 +0,0 @@ - -#define DNSMASQ_SUPPORT 1 -#define CONFIG_DNSMASQ y -#define UDHCPD_SUPPORT 1 -#define CONFIG_UDHCPD y -#define UDHCPC_SUPPORT 1 -#define CONFIG_UDHCPC y -#define PPPOE_SUPPORT 1 -#define CONFIG_PPPOE y -#define PPTP_SUPPORT 1 -#define CONFIG_PPTP y -#define L2TP_SUPPORT 1 -#define CONFIG_L2TP y -#define PPPD_SUPPORT 1 -#define CONFIG_PPPD y -#define ZEBRA_SUPPORT 1 -#define CONFIG_ZEBRA y -#define TFTPD_SUPPORT 1 -#define CONFIG_TFTPD y -#define DDNS_SUPPORT 1 -#define CONFIG_DDNS y -#define CRON_SUPPORT 1 -#define CONFIG_CRON y -#define HTTPD_SUPPORT 1 -#define CONFIG_HTTPD y -#define GET_POST_SUPPORT 1 -#define CONFIG_GET_POST y - -#if 1 -#define HEARTBEAT_SUPPORT 1 -#define CONFIG_HEARTBEAT y -#define MULTICAST_SUPPORT 1 -#define CONFIG_MULTICAST y -#define SETUP_WIZARD_SUPPORT 1 -#define CONFIG_SETUP_WIZARD y -#define PARENTAL_CONTROL_SUPPORT 1 -#define CONFIG_PARENTAL_CONTROL y -#define HTTPS_SUPPORT 1 -#define CONFIG_HTTPS y -#define EOU_SUPPORT 1 -#define CONFIG_EOU y -#define EZC_SUPPORT 1 -#define CONFIG_EZC y -#define WRITE_MAC_SUPPORT 1 -#define CONFIG_WRITE_MAC y -#define DIAG_SUPPORT 1 -#define CONFIG_DIAG y -#endif - -#define SPEED_BOOSTER_SUPPORT 1 -#define CONFIG_SPEED_BOOSTER y -#define XBOX_SUPPORT 1 -#define CONFIG_XBOX y - -#if 0 -#define MPPPOE_SUPPORT 1 -#define CONFIG_MPPPOE y -#define UNNUMBERIP_SUPPORT 1 -#define CONFIG_UNNUMBERIP y -#endif - -#define WL_STA_SUPPORT 1 -#define CONFIG_WL_STA y -#define BACKUP_RESTORE_SUPPORT 1 -#define CONFIG_BACKUP_RESTORE y -#define PORT_TRIGGER_SUPPORT 1 -#define CONFIG_PORT_TRIGGER y -#define HW_QOS_SUPPORT 1 -#define CONFIG_HW_QOS y diff --git a/openwrt/package/openwrt/include/epivers.h b/openwrt/package/openwrt/include/epivers.h deleted file mode 100644 index e174fb50d..000000000 --- a/openwrt/package/openwrt/include/epivers.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - * -*/ - -#ifndef _epivers_h_ -#define _epivers_h_ - -#ifdef linux -#include <linux/config.h> -#endif - -/* Vendor Name, ASCII, 32 chars max */ -#ifdef COMPANYNAME -#define HPNA_VENDOR COMPANYNAME -#else -#define HPNA_VENDOR "Broadcom Corporation" -#endif - -/* Driver Date, ASCII, 32 chars max */ -#define HPNA_DRV_BUILD_DATE __DATE__ - -/* Hardware Manufacture Date, ASCII, 32 chars max */ -#define HPNA_HW_MFG_DATE "Not Specified" - -/* See documentation for Device Type values, 32 values max */ -#ifndef HPNA_DEV_TYPE - -#if defined(CONFIG_BRCM_VJ) -#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } - -#elif defined(CONFIG_BCRM_93725) -#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } - -#else -#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } - -#endif - -#endif /* !HPNA_DEV_TYPE */ - - -#define EPI_MAJOR_VERSION 3 - -#define EPI_MINOR_VERSION 60 - -#define EPI_RC_NUMBER 13 - -#define EPI_INCREMENTAL_NUMBER 0 - -#define EPI_BUILD_NUMBER 0 - -#define EPI_VERSION 3,60,13,0 - -#define EPI_VERSION_NUM 0x033c0d00 - -/* Driver Version String, ASCII, 32 chars max */ -#define EPI_VERSION_STR "3.60.13.0" -#define EPI_ROUTER_VERSION_STR "3.61.13.0" - -#endif /* _epivers_h_ */ diff --git a/openwrt/package/openwrt/include/proto/802.11.h b/openwrt/package/openwrt/include/proto/802.11.h deleted file mode 100644 index ea57850ce..000000000 --- a/openwrt/package/openwrt/include/proto/802.11.h +++ /dev/null @@ -1,852 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Fundamental types and constants relating to 802.11 - * - * $Id$ - */ - -#ifndef _802_11_H_ -#define _802_11_H_ - -#ifndef _TYPEDEFS_H_ -#include <typedefs.h> -#endif - -#ifndef _NET_ETHERNET_H_ -#include <proto/ethernet.h> -#endif - -/* enable structure packing */ -#if !defined(__GNUC__) -#pragma pack(1) -#endif - -/* some platforms require stronger medicine */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#define PACKED -#endif - - -#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ - -/* Generic 802.11 frame constants */ -#define DOT11_A3_HDR_LEN 24 -#define DOT11_A4_HDR_LEN 30 -#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN -#define DOT11_FCS_LEN 4 -#define DOT11_ICV_LEN 4 -#define DOT11_ICV_AES_LEN 8 -#define DOT11_QOS_LEN 2 - -#define DOT11_KEY_INDEX_SHIFT 6 -#define DOT11_IV_LEN 4 -#define DOT11_IV_TKIP_LEN 8 -#define DOT11_IV_AES_OCB_LEN 4 -#define DOT11_IV_AES_CCM_LEN 8 - -/* Includes MIC */ -#define DOT11_MAX_MPDU_BODY_LEN 2304 -/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ -#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ - DOT11_QOS_LEN + \ - DOT11_IV_AES_CCM_LEN + \ - DOT11_MAX_MPDU_BODY_LEN + \ - DOT11_ICV_LEN + \ - DOT11_FCS_LEN) - -#define DOT11_MAX_SSID_LEN 32 - -/* dot11RTSThreshold */ -#define DOT11_DEFAULT_RTS_LEN 2347 -#define DOT11_MAX_RTS_LEN 2347 - -/* dot11FragmentationThreshold */ -#define DOT11_MIN_FRAG_LEN 256 -#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ -#define DOT11_DEFAULT_FRAG_LEN 2346 - -/* dot11BeaconPeriod */ -#define DOT11_MIN_BEACON_PERIOD 1 -#define DOT11_MAX_BEACON_PERIOD 0xFFFF - -/* dot11DTIMPeriod */ -#define DOT11_MIN_DTIM_PERIOD 1 -#define DOT11_MAX_DTIM_PERIOD 0xFF - -/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ -#define DOT11_LLC_SNAP_HDR_LEN 8 -#define DOT11_OUI_LEN 3 -struct dot11_llc_snap_header { - uint8 dsap; /* always 0xAA */ - uint8 ssap; /* always 0xAA */ - uint8 ctl; /* always 0x03 */ - uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 - Bridge-Tunnel: 0x00 0x00 0xF8 */ - uint16 type; /* ethertype */ -} PACKED; - -/* RFC1042 header used by 802.11 per 802.1H */ -#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) - -/* Generic 802.11 MAC header */ -/* - * N.B.: This struct reflects the full 4 address 802.11 MAC header. - * The fields are defined such that the shorter 1, 2, and 3 - * address headers just use the first k fields. - */ -struct dot11_header { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr a1; /* address 1 */ - struct ether_addr a2; /* address 2 */ - struct ether_addr a3; /* address 3 */ - uint16 seq; /* sequence control */ - struct ether_addr a4; /* address 4 */ -} PACKED; - -/* Control frames */ - -struct dot11_rts_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr ta; /* transmitter address */ -} PACKED; -#define DOT11_RTS_LEN 16 - -struct dot11_cts_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ -} PACKED; -#define DOT11_CTS_LEN 10 - -struct dot11_ack_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ -} PACKED; -#define DOT11_ACK_LEN 10 - -struct dot11_ps_poll_frame { - uint16 fc; /* frame control */ - uint16 durid; /* AID */ - struct ether_addr bssid; /* receiver address, STA in AP */ - struct ether_addr ta; /* transmitter address */ -} PACKED; -#define DOT11_PS_POLL_LEN 16 - -struct dot11_cf_end_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr bssid; /* transmitter address, STA in AP */ -} PACKED; -#define DOT11_CS_END_LEN 16 - -/* Management frame header */ -struct dot11_management_header { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr da; /* receiver address */ - struct ether_addr sa; /* transmitter address */ - struct ether_addr bssid; /* BSS ID */ - uint16 seq; /* sequence control */ -} PACKED; -#define DOT11_MGMT_HDR_LEN 24 - -/* Management frame payloads */ - -struct dot11_bcn_prb { - uint32 timestamp[2]; - uint16 beacon_interval; - uint16 capability; -} PACKED; -#define DOT11_BCN_PRB_LEN 12 - -struct dot11_auth { - uint16 alg; /* algorithm */ - uint16 seq; /* sequence control */ - uint16 status; /* status code */ -} PACKED; -#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ - -struct dot11_assoc_req { - uint16 capability; /* capability information */ - uint16 listen; /* listen interval */ -} PACKED; - -struct dot11_assoc_resp { - uint16 capability; /* capability information */ - uint16 status; /* status code */ - uint16 aid; /* association ID */ -} PACKED; - -struct dot11_action_measure { - uint8 category; - uint8 action; - uint8 token; - uint8 data[1]; -} PACKED; -#define DOT11_ACTION_MEASURE_LEN 3 - -/************** - 802.11h related definitions. -**************/ -typedef struct { - uint8 id; - uint8 len; - uint8 power; -} dot11_power_cnst_t; - -typedef struct { - uint8 min; - uint8 max; -} dot11_power_cap_t; - -typedef struct { - uint8 id; - uint8 len; - uint8 tx_pwr; - uint8 margin; -} dot11_tpc_rep_t; -#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ - -typedef struct { - uint8 id; - uint8 len; - uint8 first_channel; - uint8 num_channels; -} dot11_supp_channels_t; - -struct dot11_channel_switch { - uint8 id; - uint8 len; - uint8 mode; - uint8 channel; - uint8 count; -} PACKED; -typedef struct dot11_channel_switch dot11_channel_switch_t; - -/* 802.11h Measurement Request/Report IEs */ -/* Measurement Type field */ -#define DOT11_MEASURE_TYPE_BASIC 0 -#define DOT11_MEASURE_TYPE_CCA 1 -#define DOT11_MEASURE_TYPE_RPI 2 - -/* Measurement Mode field */ - -/* Measurement Request Modes */ -#define DOT11_MEASURE_MODE_ENABLE (1<<1) -#define DOT11_MEASURE_MODE_REQUEST (1<<2) -#define DOT11_MEASURE_MODE_REPORT (1<<3) -/* Measurement Report Modes */ -#define DOT11_MEASURE_MODE_LATE (1<<0) -#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) -#define DOT11_MEASURE_MODE_REFUSED (1<<2) -/* Basic Measurement Map bits */ -#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) -#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) -#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) -#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) -#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) - -typedef struct { - uint8 id; - uint8 len; - uint8 token; - uint8 mode; - uint8 type; - uint8 channel; - uint8 start_time[8]; - uint16 duration; -} dot11_meas_req_t; -#define DOT11_MNG_IE_MREQ_LEN 14 -/* length of Measure Request IE data not including variable len */ -#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 - -struct dot11_meas_rep { - uint8 id; - uint8 len; - uint8 token; - uint8 mode; - uint8 type; - union - { - struct { - uint8 channel; - uint8 start_time[8]; - uint16 duration; - uint8 map; - } PACKED basic; - uint8 data[1]; - } PACKED rep; -} PACKED; -typedef struct dot11_meas_rep dot11_meas_rep_t; - -/* length of Measure Report IE data not including variable len */ -#define DOT11_MNG_IE_MREP_FIXED_LEN 3 - -struct dot11_meas_rep_basic { - uint8 channel; - uint8 start_time[8]; - uint16 duration; - uint8 map; -} PACKED; -typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; -#define DOT11_MEASURE_BASIC_REP_LEN 12 - -struct dot11_quiet { - uint8 id; - uint8 len; - uint8 count; /* TBTTs until beacon interval in quiet starts */ - uint8 period; /* Beacon intervals between periodic quiet periods ? */ - uint16 duration;/* Length of quiet period, in TU's */ - uint16 offset; /* TU's offset from TBTT in Count field */ -} PACKED; -typedef struct dot11_quiet dot11_quiet_t; - -typedef struct { - uint8 channel; - uint8 map; -} chan_map_tuple_t; - -typedef struct { - uint8 id; - uint8 len; - uint8 eaddr[ETHER_ADDR_LEN]; - uint8 interval; - chan_map_tuple_t map[1]; -} dot11_ibss_dfs_t; - -/* WME Elements */ -#define WME_OUI "\x00\x50\xf2" -#define WME_VER 1 -#define WME_TYPE 2 -#define WME_SUBTYPE_IE 0 /* Information Element */ -#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ -#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ - -/* WME Access Category Indices (ACIs) */ -#define AC_BE 0 /* Best Effort */ -#define AC_BK 1 /* Background */ -#define AC_VI 2 /* Video */ -#define AC_VO 3 /* Voice */ -#define AC_MAX 4 - -/* WME Information Element (IE) */ -struct wme_ie { - uint8 oui[3]; - uint8 type; - uint8 subtype; - uint8 version; - uint8 acinfo; -} PACKED; -typedef struct wme_ie wme_ie_t; -#define WME_IE_LEN 7 - -struct wme_acparam { - uint8 ACI; - uint8 ECW; - uint16 TXOP; /* stored in network order (ls octet first) */ -} PACKED; -typedef struct wme_acparam wme_acparam_t; - -/* WME Parameter Element (PE) */ -struct wme_params { - uint8 oui[3]; - uint8 type; - uint8 subtype; - uint8 version; - uint8 acinfo; - uint8 rsvd; - wme_acparam_t acparam[4]; -} PACKED; -typedef struct wme_params wme_params_t; -#define WME_PARAMS_IE_LEN 24 - -/* acinfo */ -#define WME_COUNT_MASK 0x0f -/* ACI */ -#define WME_AIFS_MASK 0x0f -#define WME_ACM_MASK 0x10 -#define WME_ACI_MASK 0x60 -#define WME_ACI_SHIFT 5 -/* ECW */ -#define WME_CWMIN_MASK 0x0f -#define WME_CWMAX_MASK 0xf0 -#define WME_CWMAX_SHIFT 4 - -#define WME_TXOP_UNITS 32 - -/* WME Traffic Specification (TSPEC) element */ -#define WME_SUBTYPE_TSPEC 2 -#define WME_TSPEC_HDR_LEN 2 -#define WME_TSPEC_BODY_OFF 2 -struct wme_tspec { - uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */ - uint8 type; /* WME_TYPE */ - uint8 subtype; /* WME_SUBTYPE_TSPEC */ - uint8 version; /* WME_VERSION */ - uint16 ts_info; /* TS Info */ - uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ - uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ - uint32 min_service_interval; /* Minimum Service Interval (us) */ - uint32 max_service_interval; /* Maximum Service Interval (us) */ - uint32 inactivity_interval; /* Inactivity Interval (us) */ - uint32 service_start; /* Service Start Time (us) */ - uint32 min_rate; /* Minimum Data Rate (bps) */ - uint32 mean_rate; /* Mean Data Rate (bps) */ - uint32 max_burst_size; /* Maximum Burst Size (bytes) */ - uint32 min_phy_rate; /* Minimum PHY Rate (bps) */ - uint32 peak_rate; /* Peak Data Rate (bps) */ - uint32 delay_bound; /* Delay Bound (us) */ - uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */ - uint16 medium_time; /* Medium Time (32 us/s periods) */ -} PACKED; -typedef struct wme_tspec wme_tspec_t; -#define WME_TSPEC_LEN 56 /* not including 2-byte header */ - -/* ts_info */ -/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */ -#define TS_INFO_PRIO_SHIFT_HI 11 -#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI) -#define TS_INFO_PRIO_SHIFT_LO 1 -#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO) -#define TS_INFO_CONTENTION_SHIFT 7 -#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) -#define TS_INFO_DIRECTION_SHIFT 5 -#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) -#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) -#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) -#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) - -/* nom_msdu_size */ -#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ -#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ - -/* surplus_bandwidth */ -/* Represented as 3 bits of integer, binary point, 13 bits fraction */ -#define INTEGER_SHIFT 13 -#define FRACTION_MASK 0x1FFF - -/* Management Notification Frame */ -struct dot11_management_notification { - uint8 category; /* DOT11_ACTION_NOTIFICATION */ - uint8 action; - uint8 token; - uint8 status; - uint8 data[1]; /* Elements */ -} PACKED; -#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ - -/* WME Action Codes */ -#define WME_SETUP_REQUEST 0 -#define WME_SETUP_RESPONSE 1 -#define WME_TEARDOWN 2 - -/* WME Setup Response Status Codes */ -#define WME_ADMISSION_ACCEPTED 0 -#define WME_INVALID_PARAMETERS 1 -#define WME_ADMISSION_REFUSED 3 - -/* Macro to take a pointer to a beacon or probe response - * header and return the char* pointer to the SSID info element - */ -#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) - -/* Authentication frame payload constants */ -#define DOT11_OPEN_SYSTEM 0 -#define DOT11_SHARED_KEY 1 -#define DOT11_CHALLENGE_LEN 128 - -/* Frame control macros */ -#define FC_PVER_MASK 0x3 -#define FC_PVER_SHIFT 0 -#define FC_TYPE_MASK 0xC -#define FC_TYPE_SHIFT 2 -#define FC_SUBTYPE_MASK 0xF0 -#define FC_SUBTYPE_SHIFT 4 -#define FC_TODS 0x100 -#define FC_TODS_SHIFT 8 -#define FC_FROMDS 0x200 -#define FC_FROMDS_SHIFT 9 -#define FC_MOREFRAG 0x400 -#define FC_MOREFRAG_SHIFT 10 -#define FC_RETRY 0x800 -#define FC_RETRY_SHIFT 11 -#define FC_PM 0x1000 -#define FC_PM_SHIFT 12 -#define FC_MOREDATA 0x2000 -#define FC_MOREDATA_SHIFT 13 -#define FC_WEP 0x4000 -#define FC_WEP_SHIFT 14 -#define FC_ORDER 0x8000 -#define FC_ORDER_SHIFT 15 - -/* sequence control macros */ -#define SEQNUM_SHIFT 4 -#define FRAGNUM_MASK 0xF - -/* Frame Control type/subtype defs */ - -/* FC Types */ -#define FC_TYPE_MNG 0 -#define FC_TYPE_CTL 1 -#define FC_TYPE_DATA 2 - -/* Management Subtypes */ -#define FC_SUBTYPE_ASSOC_REQ 0 -#define FC_SUBTYPE_ASSOC_RESP 1 -#define FC_SUBTYPE_REASSOC_REQ 2 -#define FC_SUBTYPE_REASSOC_RESP 3 -#define FC_SUBTYPE_PROBE_REQ 4 -#define FC_SUBTYPE_PROBE_RESP 5 -#define FC_SUBTYPE_BEACON 8 -#define FC_SUBTYPE_ATIM 9 -#define FC_SUBTYPE_DISASSOC 10 -#define FC_SUBTYPE_AUTH 11 -#define FC_SUBTYPE_DEAUTH 12 -#define FC_SUBTYPE_ACTION 13 - -/* Control Subtypes */ -#define FC_SUBTYPE_PS_POLL 10 -#define FC_SUBTYPE_RTS 11 -#define FC_SUBTYPE_CTS 12 -#define FC_SUBTYPE_ACK 13 -#define FC_SUBTYPE_CF_END 14 -#define FC_SUBTYPE_CF_END_ACK 15 - -/* Data Subtypes */ -#define FC_SUBTYPE_DATA 0 -#define FC_SUBTYPE_DATA_CF_ACK 1 -#define FC_SUBTYPE_DATA_CF_POLL 2 -#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 -#define FC_SUBTYPE_NULL 4 -#define FC_SUBTYPE_CF_ACK 5 -#define FC_SUBTYPE_CF_POLL 6 -#define FC_SUBTYPE_CF_ACK_POLL 7 -#define FC_SUBTYPE_QOS_DATA 8 -#define FC_SUBTYPE_QOS_NULL 12 - -/* type-subtype combos */ -#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) - -#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) - -#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) -#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) -#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) -#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) -#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) -#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) -#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) -#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) -#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) -#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) -#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) - -#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) -#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) -#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) -#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) -#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) -#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) - -#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) -#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) -#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) -#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) -#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) - -/* QoS Control Field */ - -/* 802.1D Tag */ -#define QOS_PRIO_SHIFT 0 -#define QOS_PRIO_MASK 0x0007 -#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) - -/* Ack Policy (0 means Acknowledge) */ -#define QOS_ACK_SHIFT 5 -#define QOS_ACK_MASK 0x0060 -#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) - -/* Management Frames */ - -/* Management Frame Constants */ - -/* Fixed fields */ -#define DOT11_MNG_AUTH_ALGO_LEN 2 -#define DOT11_MNG_AUTH_SEQ_LEN 2 -#define DOT11_MNG_BEACON_INT_LEN 2 -#define DOT11_MNG_CAP_LEN 2 -#define DOT11_MNG_AP_ADDR_LEN 6 -#define DOT11_MNG_LISTEN_INT_LEN 2 -#define DOT11_MNG_REASON_LEN 2 -#define DOT11_MNG_AID_LEN 2 -#define DOT11_MNG_STATUS_LEN 2 -#define DOT11_MNG_TIMESTAMP_LEN 8 - -/* DUR/ID field in assoc resp is 0xc000 | AID */ -#define DOT11_AID_MASK 0x3fff - -/* Reason Codes */ -#define DOT11_RC_RESERVED 0 -#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ -#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ -#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is - leaving (or has left) IBSS or ESS */ -#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ -#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle - all currently associated stations */ -#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from - nonauthenticated station */ -#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from - nonassociated station */ -#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is - leaving (or has left) BSS */ -#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is - not authenticated with responding station */ -#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ - -/* Status Codes */ -#define DOT11_STATUS_SUCCESS 0 /* Successful */ -#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ -#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities - in the Capability Information field */ -#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to - confirm that association exists */ -#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside - the scope of this standard */ -#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the - specified authentication algorithm */ -#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with - authentication transaction sequence number - out of expected sequence */ -#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ -#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting - for next frame in sequence */ -#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to - handle additional associated stations */ -#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station - not supporting all of the data rates in the - BSSBasicRateSet parameter */ -#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station - not supporting the Short Preamble option */ -#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station - not supporting the PBCC Modulation option */ -#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station - not supporting the Channel Agility option */ -#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management - capability is required. */ -#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the - Power Cap element is unacceptable. */ -#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the - Supported Channel element is unacceptable */ -#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station - not supporting the Short Slot Time option */ -#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station - not supporting the ER-PBCC Modulation option */ -#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station - not supporting the DSS-OFDM option */ - -/* Info Elts, length of INFORMATION portion of Info Elts */ -#define DOT11_MNG_DS_PARAM_LEN 1 -#define DOT11_MNG_IBSS_PARAM_LEN 2 - -/* TIM Info element has 3 bytes fixed info in INFORMATION field, - * followed by 1 to 251 bytes of Partial Virtual Bitmap */ -#define DOT11_MNG_TIM_FIXED_LEN 3 -#define DOT11_MNG_TIM_DTIM_COUNT 0 -#define DOT11_MNG_TIM_DTIM_PERIOD 1 -#define DOT11_MNG_TIM_BITMAP_CTL 2 -#define DOT11_MNG_TIM_PVB 3 - -/* TLV defines */ -#define TLV_TAG_OFF 0 -#define TLV_LEN_OFF 1 -#define TLV_HDR_LEN 2 -#define TLV_BODY_OFF 2 - -/* Management Frame Information Element IDs */ -#define DOT11_MNG_SSID_ID 0 -#define DOT11_MNG_RATES_ID 1 -#define DOT11_MNG_FH_PARMS_ID 2 -#define DOT11_MNG_DS_PARMS_ID 3 -#define DOT11_MNG_CF_PARMS_ID 4 -#define DOT11_MNG_TIM_ID 5 -#define DOT11_MNG_IBSS_PARMS_ID 6 -#define DOT11_MNG_COUNTRY_ID 7 -#define DOT11_MNG_HOPPING_PARMS_ID 8 -#define DOT11_MNG_HOPPING_TABLE_ID 9 -#define DOT11_MNG_REQUEST_ID 10 -#define DOT11_MNG_CHALLENGE_ID 16 -#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ -#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ -#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ -#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ -#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ -#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ -#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ -#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ -#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ -#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ -#define DOT11_MNG_ERP_ID 42 -#define DOT11_MNG_NONERP_ID 47 -#define DOT11_MNG_EXT_RATES_ID 50 -#define DOT11_MNG_WPA_ID 221 -#define DOT11_MNG_PROPR_ID 221 - -/* ERP info element bit values */ -#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ -#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ -#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ -#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ - -/* Capability Information Field */ -#define DOT11_CAP_ESS 0x0001 -#define DOT11_CAP_IBSS 0x0002 -#define DOT11_CAP_POLLABLE 0x0004 -#define DOT11_CAP_POLL_RQ 0x0008 -#define DOT11_CAP_PRIVACY 0x0010 -#define DOT11_CAP_SHORT 0x0020 -#define DOT11_CAP_PBCC 0x0040 -#define DOT11_CAP_AGILITY 0x0080 -#define DOT11_CAP_SPECTRUM 0x0100 -#define DOT11_CAP_SHORTSLOT 0x0400 -#define DOT11_CAP_CCK_OFDM 0x2000 - -/* Action Frame Constants */ -#define DOT11_ACTION_CAT_ERR_MASK 0x80 -#define DOT11_ACTION_CAT_SPECT_MNG 0x00 -#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ - -#define DOT11_ACTION_ID_M_REQ 0 -#define DOT11_ACTION_ID_M_REP 1 -#define DOT11_ACTION_ID_TPC_REQ 2 -#define DOT11_ACTION_ID_TPC_REP 3 -#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 - -/* MLME Enumerations */ -#define DOT11_BSSTYPE_INFRASTRUCTURE 0 -#define DOT11_BSSTYPE_INDEPENDENT 1 -#define DOT11_BSSTYPE_ANY 2 -#define DOT11_SCANTYPE_ACTIVE 0 -#define DOT11_SCANTYPE_PASSIVE 1 - -/* 802.11 A PHY constants */ -#define APHY_SLOT_TIME 9 -#define APHY_SIFS_TIME 16 -#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) -#define APHY_PREAMBLE_TIME 16 -#define APHY_SIGNAL_TIME 4 -#define APHY_SYMBOL_TIME 4 -#define APHY_SERVICE_NBITS 16 -#define APHY_TAIL_NBITS 6 -#define APHY_CWMIN 15 - -/* 802.11 B PHY constants */ -#define BPHY_SLOT_TIME 20 -#define BPHY_SIFS_TIME 10 -#define BPHY_DIFS_TIME 50 -#define BPHY_PLCP_TIME 192 -#define BPHY_PLCP_SHORT_TIME 96 -#define BPHY_CWMIN 31 - -/* 802.11 G constants */ -#define DOT11_OFDM_SIGNAL_EXTENSION 6 - -#define PHY_CWMAX 1023 - -#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ - -/* dot11Counters Table - 802.11 spec., Annex D */ -typedef struct d11cnt { - uint32 txfrag; /* dot11TransmittedFragmentCount */ - uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ - uint32 txfail; /* dot11FailedCount */ - uint32 txretry; /* dot11RetryCount */ - uint32 txretrie; /* dot11MultipleRetryCount */ - uint32 rxdup; /* dot11FrameduplicateCount */ - uint32 txrts; /* dot11RTSSuccessCount */ - uint32 txnocts; /* dot11RTSFailureCount */ - uint32 txnoack; /* dot11ACKFailureCount */ - uint32 rxfrag; /* dot11ReceivedFragmentCount */ - uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ - uint32 rxcrc; /* dot11FCSErrorCount */ - uint32 txfrmsnt; /* dot11TransmittedFrameCount */ - uint32 rxundec; /* dot11WEPUndecryptableCount */ -} d11cnt_t; - -/* BRCM OUI */ -#define BRCM_OUI "\x00\x10\x18" - -/* BRCM info element */ -struct brcm_ie { - uchar id; - uchar len; - uchar oui[3]; - uchar ver; - uchar assoc; /* # of assoc STAs */ - uchar flags; /* misc flags */ -} PACKED; -#define BRCM_IE_LEN 8 -typedef struct brcm_ie brcm_ie_t; -#define BRCM_IE_VER 1 - -/* brcm_ie flags */ -#define BRF_ABCAP 0x1 /* afterburner capable */ -#define BRF_ABRQRD 0x2 /* afterburner requested */ - -/* WPA definitions */ -#define WPA_VERSION 1 -#define WPA_OUI "\x00\x50\xF2" - -#define WPA_OUI_LEN 3 - -/* WPA authentication modes */ -#define WPA_AUTH_NONE 0 /* None */ -#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ -#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ -#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ - -#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ - (auth) == WPA_AUTH_UNSPECIFIED || \ - (auth) == WPA_AUTH_PSK) - - -/* Key related defines */ -#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ -#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ -#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ -#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ - -#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ -#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ -#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ -#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -#define AES_KEY_SIZE 16 /* size of AES key */ - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif - -#endif /* _802_11_H_ */ diff --git a/openwrt/package/openwrt/include/proto/ethernet.h b/openwrt/package/openwrt/include/proto/ethernet.h deleted file mode 100644 index 173464af6..000000000 --- a/openwrt/package/openwrt/include/proto/ethernet.h +++ /dev/null @@ -1,179 +0,0 @@ -/******************************************************************************* - * $Id$ - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. - ******************************************************************************/ - -#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ -#define _NET_ETHERNET_H_ - -#ifndef _TYPEDEFS_H_ -#include "typedefs.h" -#endif - -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#define PACKED -#endif - -/* - * The number of bytes in an ethernet (MAC) address. - */ -#ifndef ETHER_ADDR_LEN -#define ETHER_ADDR_LEN 6 -#endif - -/* - * The number of bytes in the type field. - */ -#ifndef ETHER_TYPE_LEN -#define ETHER_TYPE_LEN 2 -#endif - -/* - * The number of bytes in the trailing CRC field. - */ -#ifndef ETHER_CRC_LEN -#define ETHER_CRC_LEN 4 -#endif - -/* - * The length of the combined header. - */ -#ifndef ETHER_HDR_LEN -#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) -#endif - -/* - * The minimum packet length. - */ -#ifndef ETHER_MIN_LEN -#define ETHER_MIN_LEN 64 -#endif - -/* - * The minimum packet user data length. - */ -#ifndef ETHER_MIN_DATA -#define ETHER_MIN_DATA 46 -#endif - -/* - * The maximum packet length. - */ -#ifndef ETHER_MAX_LEN -#define ETHER_MAX_LEN 1518 -#endif - -/* - * The maximum packet user data length. - */ -#define ETHER_MAX_DATA 1500 - -/* - * Used to uniquely identify a 802.1q VLAN-tagged header. - */ -#define VLAN_TAG 0x8100 - -/* - * Located after dest & src address in ether header. - */ -#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) - -/* - * 4 bytes of vlan field info. - */ -#define VLAN_FIELDS_SIZE 4 - -/* location of bits in 16-bit vlan fields */ -#define VLAN_PRI_SHIFT 13 /* user priority */ -#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */ - -/* 3 bits of priority */ -#define VLAN_PRI_MASK 7 -/* 12 bits of vlan identfier (VID) */ -#define VLAN_VID_MASK 0xFFF /* VLAN identifier (VID) field */ - -struct vlan_tags { - uint16 tag_type; /* 0x8100 for VLAN */ - uint16 tag_control; /* prio | cfi | vid */ -} PACKED ; - -/* 802.1X ethertype */ - -#define ETHER_TYPE_IP 0x0800 /* IP */ -#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ -#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ - -#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4byte subtype follows ethertype */ -#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ - -/* - * A macro to validate a length with - */ -#define ETHER_IS_VALID_LEN(foo) \ - ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) - -#ifndef __NET_ETHERNET_H -#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ -/* - * Structure of a 10Mb/s Ethernet header. - */ -struct ether_header { - uint8 ether_dhost[ETHER_ADDR_LEN]; - uint8 ether_shost[ETHER_ADDR_LEN]; - uint16 ether_type; -} PACKED ; - -/* - * Structure of a 48-bit Ethernet address. - */ -struct ether_addr { - uint8 octet[ETHER_ADDR_LEN]; -} PACKED ; -#endif -#endif - -/* - * Takes a pointer, returns true if a 48-bit multicast address - * (including broadcast, since it is all ones) - */ -#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) - -/* - * Takes a pointer, returns true if a 48-bit broadcast (all ones) - */ -#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ - ((uint8 *)(ea))[1] & \ - ((uint8 *)(ea))[2] & \ - ((uint8 *)(ea))[3] & \ - ((uint8 *)(ea))[4] & \ - ((uint8 *)(ea))[5]) == 0xff) - -static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; - -/* - * Takes a pointer, returns true if a 48-bit null address (all zeros) - */ -#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ - ((uint8 *)(ea))[1] | \ - ((uint8 *)(ea))[2] | \ - ((uint8 *)(ea))[3] | \ - ((uint8 *)(ea))[4] | \ - ((uint8 *)(ea))[5]) == 0) - -/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */ -#define DSCP_PRI_MASK 0x3F /* bits 0-6 */ -#define DSCP_WME_PRI_MASK 0x38 /* bits 3-6 */ -#define DSCP_WME_PRI_SHIFT 3 - -#undef PACKED - -#endif /* _NET_ETHERNET_H_ */ diff --git a/openwrt/package/openwrt/include/shutils.h b/openwrt/package/openwrt/include/shutils.h deleted file mode 100644 index 783ee9ede..000000000 --- a/openwrt/package/openwrt/include/shutils.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Shell-like utility functions - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _shutils_h_ -#define _shutils_h_ -#include <string.h> -/* - * Reads file and returns contents - * @param fd file descriptor - * @return contents of file or NULL if an error occurred - */ -extern char * fd2str(int fd); - -/* - * Reads file and returns contents - * @param path path to file - * @return contents of file or NULL if an error occurred - */ -extern char * file2str(const char *path); - -/* - * Waits for a file descriptor to become available for reading or unblocked signal - * @param fd file descriptor - * @param timeout seconds to wait before timing out or 0 for no timeout - * @return 1 if descriptor changed status or 0 if timed out or -1 on error - */ -extern int waitfor(int fd, int timeout); - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @param path NULL, ">output", or ">>output" - * @param timeout seconds to wait before timing out or 0 for no timeout - * @param ppid NULL to wait for child termination or pointer to pid - * @return return value of executed command or errno - */ -extern int _eval(char *const argv[], char *path, int timeout, pid_t *ppid); - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @return stdout of executed command or NULL if an error occurred - */ -extern char * _backtick(char *const argv[]); - -/* - * Kills process whose PID is stored in plaintext in pidfile - * @param pidfile PID file - * @return 0 on success and errno on failure - */ -extern int kill_pidfile(char *pidfile); - -/* - * fread() with automatic retry on syscall interrupt - * @param ptr location to store to - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully read - */ -extern int safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream); - -/* - * fwrite() with automatic retry on syscall interrupt - * @param ptr location to read from - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully written - */ -extern int safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream); - -/* - * Convert Ethernet address string representation to binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @param e binary data - * @return TRUE if conversion was successful and FALSE otherwise - */ -extern int ether_atoe(const char *a, unsigned char *e); - -/* - * Convert Ethernet address binary data to string representation - * @param e binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @return a - */ -extern char * ether_etoa(const unsigned char *e, char *a); - -/* - * Concatenate two strings together into a caller supplied buffer - * @param s1 first string - * @param s2 second string - * @param buf buffer large enough to hold both strings - * @return buf - */ -static inline char * strcat_r(const char *s1, const char *s2, char *buf) -{ - strcpy(buf, s1); - strcat(buf, s2); - return buf; -} - -/* Check for a blank character; that is, a space or a tab */ -#define isblank(c) ((c) == ' ' || (c) == '\t') - -/* Strip trailing CR/NL from string <s> */ -#define chomp(s) ({ \ - char *c = (s) + strlen((s)) - 1; \ - while ((c > (s)) && (*c == '\n' || *c == '\r' || *c == ' ')) \ - *c-- = '\0'; \ - s; \ -}) - -/* Simple version of _backtick() */ -#define backtick(cmd, args...) ({ \ - char *argv[] = { cmd, ## args, NULL }; \ - _backtick(argv); \ -}) - -/* Simple version of _eval() (no timeout and wait for child termination) */ -#define eval(cmd, args...) ({ \ - char *argv[] = { cmd, ## args, NULL }; \ - _eval(argv, ">/dev/console", 0, NULL); \ -}) - -/* Copy each token in wordlist delimited by space into word */ -#define foreach(word, wordlist, next) \ - for (next = &wordlist[strspn(wordlist, " ")], \ - strncpy(word, next, sizeof(word)), \ - word[strcspn(word, " ")] = '\0', \ - word[sizeof(word) - 1] = '\0', \ - next = strchr(next, ' '); \ - strlen(word); \ - next = next ? &next[strspn(next, " ")] : "", \ - strncpy(word, next, sizeof(word)), \ - word[strcspn(word, " ")] = '\0', \ - word[sizeof(word) - 1] = '\0', \ - next = strchr(next, ' ')) - -/* Return NUL instead of NULL if undefined */ -#define safe_getenv(s) (getenv(s) ? : "") - -/* Print directly to the console */ -#define cprintf(fmt, args...) do { \ - FILE *fp = fopen("/dev/console", "w"); \ - if (fp) { \ - fprintf(fp, fmt, ## args); \ - fclose(fp); \ - } \ -} while (0) - -/* Debug print */ -#ifdef DEBUG -#define dprintf(fmt, args...) cprintf("%s: " fmt, __FUNCTION__, ## args) -#else -#define dprintf(fmt, args...) -#endif - -#ifdef vxworks - -#include <inetLib.h> -#define inet_aton(a, n) ((inet_aton((a), (n)) == ERROR) ? 0 : 1) -#define inet_ntoa(n) ({ char a[INET_ADDR_LEN]; inet_ntoa_b ((n), a); a; }) - -#include <typedefs.h> -#include <bcmutils.h> -#define ether_atoe(a, e) bcm_ether_atoe((a), (e)) -#define ether_etoa(e, a) bcm_ether_ntoa((e), (a)) - -/* These declarations are not available where you would expect them */ -extern int vsnprintf (char *, size_t, const char *, va_list); -extern int snprintf(char *str, size_t count, const char *fmt, ...); -extern char *strdup(const char *); -extern char *strsep(char **stringp, char *delim); -extern int strcasecmp(const char *s1, const char *s2); -extern int strncasecmp(const char *s1, const char *s2, size_t n); - -/* Neither are socket() and connect() */ -#include <sockLib.h> - -#ifdef DEBUG -#undef dprintf -#define dprintf printf -#endif -#endif - -#endif /* _shutils_h_ */ diff --git a/openwrt/package/openwrt/include/typedefs.h b/openwrt/package/openwrt/include/typedefs.h deleted file mode 100644 index 6b0c25e04..000000000 --- a/openwrt/package/openwrt/include/typedefs.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id$ - */ - -#ifndef _TYPEDEFS_H_ -#define _TYPEDEFS_H_ - - -/* Define 'SITE_TYPEDEFS' in the compile to include a site specific - * typedef file "site_typedefs.h". - * - * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" - * section of this file makes inferences about the compile environment - * based on defined symbols and possibly compiler pragmas. - * - * Following these two sections is the "Default Typedefs" - * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is - * defined. This section has a default set of typedefs and a few - * proprocessor symbols (TRUE, FALSE, NULL, ...). - */ - -#ifdef SITE_TYPEDEFS - -/******************************************************************************* - * Site Specific Typedefs - *******************************************************************************/ - -#include "site_typedefs.h" - -#else - -/******************************************************************************* - * Inferred Typedefs - *******************************************************************************/ - -/* Infer the compile environment based on preprocessor symbols and pramas. - * Override type definitions as needed, and include configuration dependent - * header files to define types. - */ - -#ifdef __cplusplus - -#define TYPEDEF_BOOL -#ifndef FALSE -#define FALSE false -#endif -#ifndef TRUE -#define TRUE true -#endif - -#else /* ! __cplusplus */ - -/* for Windows build, define bool as a uchar instead of the default int */ -#if defined(_WIN32) - -#define TYPEDEF_BOOL -typedef unsigned char bool; - -#endif /* _WIN32 */ - -#endif /* ! __cplusplus */ - -#ifdef _MSC_VER /* Microsoft C */ -#define TYPEDEF_INT64 -#define TYPEDEF_UINT64 -typedef signed __int64 int64; -typedef unsigned __int64 uint64; -#endif - -#if defined(MACOSX) && defined(KERNEL) -#define TYPEDEF_BOOL -#endif - - -#if defined(linux) -#define TYPEDEF_UINT -#define TYPEDEF_USHORT -#define TYPEDEF_ULONG -#endif - -#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) -#define TYPEDEF_UINT -#define TYPEDEF_USHORT -#endif - - -/* Do not support the (u)int64 types with strict ansi for GNU C */ -#if defined(__GNUC__) && defined(__STRICT_ANSI__) -#define TYPEDEF_INT64 -#define TYPEDEF_UINT64 -#endif - -/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode - * for singned or unsigned */ -#if defined(__ICL) - -#define TYPEDEF_INT64 - -#if defined(__STDC__) -#define TYPEDEF_UINT64 -#endif - -#endif /* __ICL */ - - -#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) - -/* pick up ushort & uint from standard types.h */ -#if defined(linux) && defined(__KERNEL__) - -#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ - -#else - -#include <sys/types.h> - -#endif - -#endif /* !_WIN32 && !PMON && !_CFE_ */ - -#if defined(MACOSX) && defined(KERNEL) -#include <IOKit/IOTypes.h> -#endif - - -/* use the default typedefs in the next section of this file */ -#define USE_TYPEDEF_DEFAULTS - -#endif /* SITE_TYPEDEFS */ - - -/******************************************************************************* - * Default Typedefs - *******************************************************************************/ - -#ifdef USE_TYPEDEF_DEFAULTS -#undef USE_TYPEDEF_DEFAULTS - -#ifndef TYPEDEF_BOOL -typedef int bool; -#endif - -/*----------------------- define uchar, ushort, uint, ulong ----------------*/ - -#ifndef TYPEDEF_UCHAR -typedef unsigned char uchar; -#endif - -#ifndef TYPEDEF_USHORT -typedef unsigned short ushort; -#endif - -#ifndef TYPEDEF_UINT -typedef unsigned int uint; -#endif - -#ifndef TYPEDEF_ULONG -typedef unsigned long ulong; -#endif - -/*----------------------- define [u]int8/16/32/64 --------------------------*/ - -#ifndef TYPEDEF_UINT8 -typedef unsigned char uint8; -#endif - -#ifndef TYPEDEF_UINT16 -typedef unsigned short uint16; -#endif - -#ifndef TYPEDEF_UINT32 -typedef unsigned int uint32; -#endif - -#ifndef TYPEDEF_UINT64 -typedef unsigned long long uint64; -#endif - -#ifndef TYPEDEF_INT8 -typedef signed char int8; -#endif - -#ifndef TYPEDEF_INT16 -typedef signed short int16; -#endif - -#ifndef TYPEDEF_INT32 -typedef signed int int32; -#endif - -#ifndef TYPEDEF_INT64 -typedef signed long long int64; -#endif - -/*----------------------- define float32/64, float_t -----------------------*/ - -#ifndef TYPEDEF_FLOAT32 -typedef float float32; -#endif - -#ifndef TYPEDEF_FLOAT64 -typedef double float64; -#endif - -/* - * abstracted floating point type allows for compile time selection of - * single or double precision arithmetic. Compiling with -DFLOAT32 - * selects single precision; the default is double precision. - */ - -#ifndef TYPEDEF_FLOAT_T - -#if defined(FLOAT32) -typedef float32 float_t; -#else /* default to double precision floating point */ -typedef float64 float_t; -#endif - -#endif /* TYPEDEF_FLOAT_T */ - -/*----------------------- define macro values -----------------------------*/ - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef OFF -#define OFF 0 -#endif - -#ifndef ON -#define ON 1 -#endif - -/*----------------------- define PTRSZ, INLINE ----------------------------*/ - -#ifndef PTRSZ -#define PTRSZ sizeof (char*) -#endif - -#ifndef INLINE - -#ifdef _MSC_VER - -#define INLINE __inline - -#elif __GNUC__ - -#define INLINE __inline__ - -#else - -#define INLINE - -#endif /* _MSC_VER */ - -#endif /* INLINE */ - -#undef TYPEDEF_BOOL -#undef TYPEDEF_UCHAR -#undef TYPEDEF_USHORT -#undef TYPEDEF_UINT -#undef TYPEDEF_ULONG -#undef TYPEDEF_UINT8 -#undef TYPEDEF_UINT16 -#undef TYPEDEF_UINT32 -#undef TYPEDEF_UINT64 -#undef TYPEDEF_INT8 -#undef TYPEDEF_INT16 -#undef TYPEDEF_INT32 -#undef TYPEDEF_INT64 -#undef TYPEDEF_FLOAT32 -#undef TYPEDEF_FLOAT64 -#undef TYPEDEF_FLOAT_T - -#endif /* USE_TYPEDEF_DEFAULTS */ - -#endif /* _TYPEDEFS_H_ */ diff --git a/openwrt/package/openwrt/include/utils.h b/openwrt/package/openwrt/include/utils.h deleted file mode 100644 index b8d1cdb7b..000000000 --- a/openwrt/package/openwrt/include/utils.h +++ /dev/null @@ -1,131 +0,0 @@ -#include <cy_conf.h> - -extern int diag_led(int type, int act); -extern int C_led(int i); -extern int get_single_ip(char *ipaddr, int which); -extern char *get_mac_from_ip(char *ip); -extern struct dns_lists *get_dns_list(int no); -extern int dns_to_resolv(void); -extern char *get_wan_face(void); -extern int check_wan_link(int num); -extern char *get_complete_lan_ip(char *ip); -extern int get_int_len(int num); -extern int file_to_buf(char *path, char *buf, int len); -extern int buf_to_file(char *path, char *buf); -extern pid_t* find_pid_by_name( char* pidName); -extern int find_pid_by_ps(char* pidName); -extern int *find_all_pid_by_ps(char* pidName); -extern char *find_name_by_proc(int pid); -extern int get_ppp_pid(char *file); -extern long convert_ver(char *ver); -extern int check_flash(void); -extern int check_action(void); -extern int check_now_boot(void); -extern int check_hw_type(void); -extern int is_exist(char *filename); -extern void set_ip_forward(char c); -struct mtu_lists *get_mtu(char *proto); -extern void set_host_domain_name(void); - -extern void encode(char *buf, int len); -extern void decode(char *buf, int len); - -extern int sys_netdev_ioctl(int family, int socket, char *if_name, int cmd, struct ifreq *ifr); - -int ct_openlog(const char *ident, int option, int facility, char *log_name); -void ct_syslog(int level, int enable, const char *fmt,...); -void ct_logger(int level, const char *fmt,...); -struct wl_assoc_mac * get_wl_assoc_mac(int *c); - - - -enum { DMZ, SESSION, DIAG , WL}; - -enum { START_LED, STOP_LED }; - -typedef enum { ACT_IDLE, - ACT_TFTP_UPGRADE, - ACT_WEB_UPGRADE, - ACT_WEBS_UPGRADE, - ACT_SW_RESTORE, - ACT_HW_RESTORE } ACTION; - -enum { UNKNOWN_BOOT = -1, PMON_BOOT, CFE_BOOT }; - -enum { BCM4702_CHIP, BCM4712_CHIP, BCM5325E_CHIP }; - -enum { FIRST, SECOND }; - -enum { SYSLOG_LOG=1, SYSLOG_DEBUG, CONSOLE_ONLY, LOG_CONSOLE, DEBUG_CONSOLE }; - -#define ACTION(cmd) buf_to_file(ACTION_FILE, cmd) - -struct dns_lists { - int num_servers; - char dns_server[4][16]; -}; - -#define NOT_USING 0 -#define USING 1 - -struct wl_assoc_mac -{ - char mac[18]; -}; - -struct mtu_lists { - char *proto; /* protocol */ - char *min; /* min mtu */ - char *max; /* max mtu */ -}; - - -#define PPP_PSEUDO_IP "10.64.64.64" -#define PPP_PSEUDO_NM "255.255.255.255" -#define PPP_PSEUDO_GW "10.112.112.112" - -#define PING_TMP "/tmp/ping.log" -#define TRACEROUTE_TMP "/tmp/traceroute.log" -#define MAX_BUF_LEN 254 - -#define RESOLV_FILE "/tmp/resolv.conf" -#define HOSTS_FILE "/tmp/hosts" - -#define LOG_FILE "/var/log/mess" - -#define ACTION_FILE "/tmp/action" - - -#define split(word, wordlist, next, delim) \ - for (next = wordlist, \ - strncpy(word, next, sizeof(word)), \ - word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \ - next = next ? next + sizeof(delim) - 1 : NULL ; \ - strlen(word); \ - next = next ? : "", \ - strncpy(word, next, sizeof(word)), \ - word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \ - next = next ? next + sizeof(delim) - 1 : NULL) - -#define STRUCT_LEN(name) sizeof(name)/sizeof(name[0]) - -#define printHEX(str,len) { \ - int i; \ - for (i=0 ; i<len ; i++) { \ - printf("%02X ", (unsigned char)*(str+i)); \ - if(((i+1)%16) == 0) printf("- "); \ - if(((i+1)%32) == 0) printf("\n"); \ - } \ - printf("\n\n"); \ -} - - -#define printASC(str,len) { \ - int i; \ - for (i=0 ; i<len ; i++) { \ - printf("%c", (unsigned char)*(str+i)); \ - if(((i+1)%16) == 0) printf("- "); \ - if(((i+1)%32) == 0) printf("\n"); \ - } \ - printf("\n\n"); \ -} diff --git a/openwrt/package/openwrt/include/wlcompat.h b/openwrt/package/openwrt/include/wlcompat.h deleted file mode 100644 index a4fc13439..000000000 --- a/openwrt/package/openwrt/include/wlcompat.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * wlcompat.h - * - * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * $Id$ - */ -#include <linux/wireless.h> - -#ifndef WLCOMPAT_H -#define WLCOMPAT_H - -#define WLCOMPAT_SET_MONITOR SIOCIWFIRSTPRIV + 0 -#define WLCOMPAT_GET_MONITOR SIOCIWFIRSTPRIV + 1 -#define WLCOMPAT_SET_TXPWR_LIMIT SIOCIWFIRSTPRIV + 2 -#define WLCOMPAT_GET_TXPWR_LIMIT SIOCIWFIRSTPRIV + 3 -#define WLCOMPAT_SET_ANTDIV SIOCIWFIRSTPRIV + 4 -#define WLCOMPAT_GET_ANTDIV SIOCIWFIRSTPRIV + 5 -#define WLCOMPAT_SET_TXANT SIOCIWFIRSTPRIV + 6 -#define WLCOMPAT_GET_TXANT SIOCIWFIRSTPRIV + 7 - -#endif diff --git a/openwrt/package/openwrt/include/wlioctl.h b/openwrt/package/openwrt/include/wlioctl.h deleted file mode 100644 index d5ef11f9e..000000000 --- a/openwrt/package/openwrt/include/wlioctl.h +++ /dev/null @@ -1,1094 +0,0 @@ -/* - * Custom OID/ioctl definitions for - * Broadcom 802.11abg Networking Device Driver - * - * Definitions subject to change without notice. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _wlioctl_h_ -#define _wlioctl_h_ - -#include <typedefs.h> -#include <proto/ethernet.h> -#include <proto/802.11.h> - -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#define PACKED -#endif - -#define WLC_ESSID_MAX_SIZE 32 - -#define WL_NUMRATES 255 /* max # of rates in a rateset */ - -typedef struct wl_rateset { - uint32 count; /* # rates in this set */ - uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -#define WL_CHANSPEC_CHAN_MASK 0x0fff -#define WL_CHANSPEC_BAND_MASK 0xf000 -#define WL_CHANSPEC_BAND_SHIFT 12 -#define WL_CHANSPEC_BAND_A 0x1000 -#define WL_CHANSPEC_BAND_B 0x2000 - -/* - * Per-bss information structure. - */ - -#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ -#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ - -typedef struct wl_bss_info106 { - uint version; /* version field */ - struct ether_addr BSSID; - uint8 SSID_len; - uint8 SSID[32]; - uint8 Privacy; /* 0=No WEP, 1=Use WEP */ - int16 RSSI; /* receive signal strength (in dBm) */ - uint16 beacon_period; /* units are Kusec */ - uint16 atim_window; /* units are Kusec */ - uint8 channel; /* Channel no. */ - int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ - struct { - uint count; /* # rates in this set */ - uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - uint8 dtim_period; /* DTIM period */ - int8 phy_noise; /* noise right after tx (in dBm) */ - uint16 capability; /* Capability information */ - struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ - uint16 prb_len; /* probe response frame length (ioctl na) */ - struct { - uint8 supported; /* wpa supported */ - uint8 multicast; /* multicast cipher */ - uint8 ucount; /* count of unicast ciphers */ - uint8 unicast[4]; /* unicast ciphers */ - uint8 acount; /* count of auth modes */ - uint8 auth[4]; /* Authentication modes */ - } wpa; -} wl_bss_info106_t; - -typedef struct wl_bss_info { - uint32 version; /* version field */ - uint32 length; /* byte length of data in this record, starting at version and including IEs */ - struct ether_addr BSSID; - uint16 beacon_period; /* units are Kusec */ - uint16 capability; /* Capability information */ - uint8 SSID_len; - uint8 SSID[32]; - struct { - uint count; /* # rates in this set */ - uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - uint8 channel; /* Channel no. */ - uint16 atim_window; /* units are Kusec */ - uint8 dtim_period; /* DTIM period */ - int16 RSSI; /* receive signal strength (in dBm) */ - int8 phy_noise; /* noise (in dBm) */ - uint32 ie_length; /* byte length of Information Elements */ - /* variable length Information Elements */ -} wl_bss_info_t; - -typedef struct wlc_ssid { - uint32 SSID_len; - uchar SSID[32]; -} wlc_ssid_t; - -typedef struct wl_scan_params { - wlc_ssid_t ssid; /* default is {0, ""} */ - struct ether_addr bssid;/* default is bcast */ - int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ - int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ - int32 nprobes; /* -1 use default, number of probes per channel */ - int32 active_time; /* -1 use default, dwell time per channel for active scanning */ - int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ - int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ - int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ - uint16 channel_list[1]; /* list of chanspecs */ -} wl_scan_params_t; -/* size of wl_scan_params not including variable length array */ -#define WL_SCAN_PARAMS_FIXED_SIZE 64 - -typedef struct wl_scan_results { - uint32 buflen; - uint32 version; - uint32 count; - wl_bss_info_t bss_info[1]; -} wl_scan_results_t; -/* size of wl_scan_results not including variable length array */ -#define WL_SCAN_RESULTS_FIXED_SIZE 12 - -/* uint32 list */ -typedef struct wl_uint32_list { - /* in - # of elements, out - # of entries */ - uint32 count; - /* variable length uint32 list */ - uint32 element[1]; -} wl_uint32_list_t; - -#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ - -typedef struct wl_channels_in_country { - uint32 buflen; - uint32 band; - char country_abbrev[WLC_CNTRY_BUF_SZ]; - uint32 count; - uint32 channel[1]; -} wl_channels_in_country_t; - -typedef struct wl_country_list { - uint32 buflen; - uint32 band_set; - uint32 band; - uint32 count; - char country_abbrev[1]; -} wl_country_list_t; - -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -typedef struct wl_rm_req_elt { - int8 type; - int8 flags; - uint16 chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ -} wl_rm_req_elt_t; - -typedef struct wl_rm_req { - uint32 token; /* overall measurement set token */ - uint32 count; /* number of measurement reqests */ - wl_rm_req_elt_t req[1]; /* variable length block of requests */ -} wl_rm_req_t; -#define WL_RM_REQ_FIXED_LEN 8 - -typedef struct wl_rm_rep_elt { - int8 type; - int8 flags; - uint16 chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ - uint32 len; /* byte length of data block */ - uint8 data[1]; /* variable length data block */ -} wl_rm_rep_elt_t; -#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ - -#define WL_RPI_REP_BIN_NUM 8 -typedef struct wl_rm_rpi_rep { - uint8 rpi[WL_RPI_REP_BIN_NUM]; - int8 rpi_max[WL_RPI_REP_BIN_NUM]; -} wl_rm_rpi_rep_t; - -typedef struct wl_rm_rep { - uint32 token; /* overall measurement set token */ - uint32 len; /* length of measurement report block */ - wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -} wl_rm_rep_t; -#define WL_RM_REP_FIXED_LEN 8 - - -#define WLC_MAX_KEY_SIZE 32 /* max size of any key */ -#define WLC_MAX_IV_SIZE 16 /* max size of any IV */ -#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ -#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */ -#define WLC_MAX_KEYS 54 /* Max # of WEP keys */ -#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */ -#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */ -#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */ -#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ -#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ -#define WLC_AES_KEY_SIZE 16 /* size of AES key */ - - -typedef enum sup_auth_status { - WLC_SUP_DISCONNECTED = 0, - WLC_SUP_CONNECTING, - WLC_SUP_IDREQUIRED, - WLC_SUP_AUTHENTICATING, - WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYED -} sup_auth_status_t; - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_OCB_MSDU 5 -#define CRYPTO_ALGO_AES_OCB_MPDU 6 -#define CRYPTO_ALGO_NALG 7 - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ - - -typedef struct wlc_tkip_info { - uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ - uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */ - uint32 micl; - uint32 micr; -} tkip_info_t; - -typedef struct _wsec_iv { - uint32 hi; /* upper 32 bits of IV */ - uint16 lo; /* lower 16 bits of IV */ -} wsec_iv_t; - -typedef struct wsec_key { - uint32 index; /* key index */ - uint32 len; /* key length */ - uint8 data[WLC_MAX_KEY_SIZE]; /* key data */ - tkip_info_t tkip_tx; /* tkip transmit state */ - tkip_info_t tkip_rx; /* tkip receive state */ - uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - uint32 flags; /* misc flags */ - uint32 algo_hw; /* cache for hw register*/ - uint32 aes_mode; /* cache for hw register*/ - int iv_len; /* IV length */ - int iv_initialized; /* has IV been initialized already? */ - int icv_len; /* ICV length */ - wsec_iv_t rxiv; /* Rx IV */ - wsec_iv_t txiv; /* Tx IV */ - struct ether_addr ea; /* per station */ -} wsec_key_t; - - - -typedef struct wl_wsec_key { - uint32 index; /* key index */ - uint32 len; /* key length */ - uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ - uint32 pad_1[18]; - uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - uint32 flags; /* misc flags */ - uint32 pad_2[2]; - int pad_3; - int iv_initialized; /* has IV been initialized already? */ - int pad_4; - /* Rx IV */ - struct { - uint32 hi; /* upper 32 bits of IV */ - uint16 lo; /* lower 16 bits of IV */ - } rxiv; - uint32 pad_5[2]; - struct ether_addr ea; /* per station */ -} wl_wsec_key_t; - -/* For use with wlc_wep_key.flags */ -#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */ - -#define WSEC_MIN_PSK_LEN 8 -#define WSEC_MAX_PSK_LEN 64 - -/* Flag for key material needing passhash'ing */ -#define WSEC_PASSPHRASE (1<<0) - -/* recepticle for WLC_SET_WSEC_PMK parameter */ -typedef struct { - ushort key_len; /* octets in key material */ - ushort flags; /* key handling qualification */ - uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -} wsec_pmk_t; - -/* wireless security bitvec */ -#define WEP_ENABLED 1 -#define TKIP_ENABLED 2 -#define AES_ENABLED 4 -#define WSEC_SWFLAG 8 - -#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) -#define WSEC_HW(wsec) (!WSEC_SW(wsec)) -#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) -#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) -#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) -#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) - - -/* wireless authentication bit vector */ -#define WPA_ENABLED 1 -#define PSK_ENABLED 2 - -#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) -#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) -#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) - -/* group/mcast cipher */ -#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ - ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ - WPA_CIPHER_NONE) - - -typedef struct wl_led_info { - uint32 index; /* led index */ - uint32 behavior; - bool activehi; -} wl_led_info_t; - -/* - * definitions for driver messages passed from WL to NAS. - */ -/* Use this to recognize wpa and 802.1x driver messages. */ -static const uint8 wl_wpa_snap_template[] = - { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; - -#define WL_WPA_MSG_IFNAME_MAX 16 - -/* WPA driver message */ -typedef struct wl_wpa_header { - struct ether_header eth; - struct dot11_llc_snap_header snap; - uint8 version; - uint8 type; - /* version 2 additions */ - char ifname[WL_WPA_MSG_IFNAME_MAX]; - /* version specific data */ - /* uint8 data[1]; */ -} wl_wpa_header_t PACKED; - -/* - * definitions for 802.2 messages passed from WL to NAS. - */ -/* This seems not to be defined outside the kernel on linux. */ -#ifndef ETH_P_802_2 -#define ETH_P_802_2 4 -#endif - -#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) - -/* WPA driver message ethertype - private between wlc and nas */ -#define WL_WPA_ETHER_TYPE 0x9999 - -/* WPA driver message current version */ -#define WL_WPA_MSG_VERSION 2 - -/* Type field values for the 802.2 driver messages for WPA. */ -#define WLC_ASSOC_MSG 1 -#define WLC_DISASSOC_MSG 2 -#define WLC_PTK_MIC_MSG 3 -#define WLC_GTK_MIC_MSG 4 - -/* Use this to recognize 802.2 driver messages. */ -static const uint8 wpa_snap_template[] = - { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; - - -/* 802.1x driver message */ -typedef struct wl_eapol_header { - struct ether_header eth; - struct dot11_llc_snap_header snap; - uint8 version; - uint8 reserved; - char ifname[WL_WPA_MSG_IFNAME_MAX]; - /* version specific data */ - /* uint8 802_1x_msg[1]; */ -} wl_eapol_header_t PACKED; - -#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) - -/* 802.1x driver message ethertype - private between wlc and nas */ -#define WL_EAPOL_ETHER_TYPE 0x999A - -/* 802.1x driver message current version */ -#define WL_EAPOL_MSG_VERSION 1 - -/* srom read/write struct passed through ioctl */ -typedef struct { - uint byteoff; /* byte offset */ - uint nbytes; /* number of bytes */ - uint16 buf[1]; -} srom_rw_t; - -/* R_REG and W_REG struct passed through ioctl */ -typedef struct { - uint32 byteoff; /* byte offset of the field in d11regs_t */ - uint32 val; /* read/write value of the field */ - uint32 size; /* sizeof the field */ -} rw_reg_t; - -/* Structure used by GET/SET_ATTEN ioctls */ -typedef struct { - uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ - uint16 bb; /* Baseband attenuation */ - uint16 radio; /* Radio attenuation */ - uint16 txctl1; /* Radio TX_CTL1 value */ -} atten_t; - -/* Used to get specific STA parameters */ -typedef struct { - uint32 val; - struct ether_addr ea; -} scb_val_t; - -/* callback registration data types */ - -typedef struct _mac_event_params { - uint msg; - struct ether_addr *addr; - uint result; - uint status; - uint auth_type; -} mac_event_params_t; - -typedef struct _mic_error_params { - struct ether_addr *ea; - bool group; - bool flush_txq; -} mic_error_params_t; - -typedef enum _wl_callback { - WL_MAC_EVENT_CALLBACK = 0, - WL_LINK_UP_CALLBACK, - WL_LINK_DOWN_CALLBACK, - WL_MIC_ERROR_CALLBACK, - WL_LAST_CALLBACK -} wl_callback_t; - -typedef struct _callback { - void (*fn)(void *, void *); - void *context; -} callback_t; - -typedef struct _scan_callback { - void (*fn)(void *); - void *context; -} scan_callback_t; - -/* used to register an arbitrary callback via the IOCTL interface */ -typedef struct _set_callback { - int index; - callback_t callback; -} set_callback_t; - - - -/* Event data type */ -typedef struct { - uint msg; /* Message (see below) */ - struct ether_addr *addr; /* Station address (if applicable) */ - uint status; /* Status code (see below) */ - uint reason; /* Reason code (if applicable) */ - uint auth_type; /* WLC_E_AUTH */ - bool link; /* WLC_E_LINK */ - bool group; /* WLC_E_MIC_ERROR */ - bool flush_txq; /* WLC_E_MIC_ERROR */ -} wlc_event_t; - -typedef struct { - uint16 ver; /* version of this struct */ - uint16 cap; /* sta's advertized capabilities */ - uint32 flags; /* flags defined below */ - uint32 idle; /* time since data pkt rx'd from sta */ - struct ether_addr ea; /* Station address */ - wl_rateset_t rateset; /* rateset in use */ -} sta_info_t; - -#define WL_STA_INFO_LEN 300 -#define WL_STA_VER 1 - -/* flags fields */ -#define WL_STA_BRCM 0x01 -#define WL_STA_WME 0x02 -#define WL_STA_ABCAP 0x04 -#define WL_STA_AUTHE 0x08 -#define WL_STA_ASSOC 0x10 -#define WL_STA_AUTHO 0x20 - -/* Event messages */ -#define WLC_E_SET_SSID 1 -#define WLC_E_JOIN 2 -#define WLC_E_START 3 -#define WLC_E_AUTH 4 -#define WLC_E_AUTH_IND 5 -#define WLC_E_DEAUTH 6 -#define WLC_E_DEAUTH_IND 7 -#define WLC_E_ASSOC 8 -#define WLC_E_ASSOC_IND 9 -#define WLC_E_REASSOC 10 -#define WLC_E_REASSOC_IND 11 -#define WLC_E_DISASSOC 12 -#define WLC_E_DISASSOC_IND 13 -#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */ -#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */ -#define WLC_E_GOT_BEACONS 16 -#define WLC_E_LINK 17 /* Link indication */ -#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */ -#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */ -#define WLC_E_ROAM 20 -#define WLC_E_LAST 21 - -/* Event status codes */ -#define WLC_E_STATUS_SUCCESS 0 -#define WLC_E_STATUS_FAIL 1 -#define WLC_E_STATUS_TIMEOUT 2 -#define WLC_E_STATUS_NO_NETWORKS 3 -#define WLC_E_STATUS_ABORT 4 - -typedef struct wlc_event_cb { - uint msg; /* Event message or 0 for all */ - void (*fn)(void *, wlc_event_t *); /* Callback function */ - void *context; /* Passed to callback function */ - struct wlc_event_cb *next; /* Next in the chain */ -} wlc_event_cb_t; - -/* - * Country locale determines which channels are available to us. - */ -typedef enum _wlc_locale { - WLC_WW = 0, /* Worldwide */ - WLC_THA, /* Thailand */ - WLC_ISR, /* Israel */ - WLC_JDN, /* Jordan */ - WLC_PRC, /* China */ - WLC_JPN, /* Japan */ - WLC_FCC, /* USA */ - WLC_EUR, /* Europe */ - WLC_USL, /* US Low Band only */ - WLC_JPH, /* Japan High Band only */ - WLC_ALL, /* All the channels in this band */ - WLC_11D, /* Represents locale recieved by 11d beacons */ - WLC_LAST_LOCALE, - WLC_UNDEFINED_LOCALE = 0xf -} wlc_locale_t; - -/* channel encoding */ -typedef struct channel_info { - int hw_channel; - int target_channel; - int scan_channel; -} channel_info_t; - -/* For ioctls that take a list of MAC addresses */ -struct maclist { - uint count; /* number of MAC addresses */ - struct ether_addr ea[1]; /* variable length array of MAC addresses */ -}; - -/* get pkt count struct passed through ioctl */ -typedef struct get_pktcnt { - uint rx_good_pkt; - uint rx_bad_pkt; - uint tx_good_pkt; - uint tx_bad_pkt; -} get_pktcnt_t; - -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - bool set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ -} wl_ioctl_t; - -/* - * Structure for passing hardware and software - * revision info up from the driver. - */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ -} wlc_rev_info_t; - -/* check this magic number */ -#define WLC_IOCTL_MAGIC 0x14e46c77 - -/* bump this number if you change the ioctl interface */ -#define WLC_IOCTL_VERSION 1 - -/* maximum length buffer required */ -#define WLC_IOCTL_MAXLEN 8192 - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_GET_LOOP 4 -#define WLC_SET_LOOP 5 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -#define WLC_OBSOLETE 11 -#define WLC_GET_RATE 12 -#define WLC_SET_RATE 13 -#define WLC_GET_INSTANCE 14 -#define WLC_GET_FRAG 15 -#define WLC_SET_FRAG 16 -#define WLC_GET_RTS 17 -#define WLC_SET_RTS 18 -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 -#define WLC_DUMP_SCB 28 -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -#define WLC_DUMP_RATE 40 -#define WLC_SET_RATE_PARAMS 41 -#define WLC_GET_WEP 42 -#define WLC_SET_WEP 43 -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE 48 /* added by nbd */ -#define WLC_SET_PASSIVE 49 /* added by nbd */ -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_ROAM_DELTA 56 -#define WLC_SET_ROAM_DELTA 57 -#define WLC_GET_ROAM_SCAN_PERIOD 58 -#define WLC_SET_ROAM_SCAN_PERIOD 59 -#define WLC_EVM 60 -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 -#define WLC_GET_TXPWR 65 -#define WLC_SET_TXPWR 66 -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 -#define WLC_GET_LOCALE 73 -#define WLC_SET_LOCALE 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 -#define WLC_GET_D11CNTS 89 -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 -#define WLC_CARRIER_SUPPRESS 93 -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -#define WLC_DIAG_LOOPBACK 103 -#define WLC_RESET_D11CNTS 104 -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 /* added by nbd */ -#define WLC_SET_MONITOR 108 /* added by nbd */ -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 -#define WLC_GET_MRATE 153 -#define WLC_SET_MRATE 154 -#define WLC_GET_IGNORE_BCNS 155 -#define WLC_SET_IGNORE_BCNS 156 -#define WLC_GET_SCB_TIMEOUT 157 -#define WLC_SET_SCB_TIMEOUT 158 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_UCFLAGS 166 -#define WLC_SET_UCFLAGS 167 -#define WLC_GET_PWRIDX 168 -#define WLC_SET_PWRIDX 169 -#define WLC_GET_TSSI 170 -#define WLC_GET_SUP_RATESET_OVERRIDE 171 -#define WLC_SET_SUP_RATESET_OVERRIDE 172 -#define WLC_SET_FAST_TIMER 173 -#define WLC_GET_FAST_TIMER 174 -#define WLC_SET_SLOW_TIMER 175 -#define WLC_GET_SLOW_TIMER 176 -#define WLC_DUMP_PHYREGS 177 -#define WLC_GET_GMODE_PROTECTION_CONTROL 178 -#define WLC_SET_GMODE_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ -#define WLC_DECRYPT_STATUS 182 /* ndis only */ -#define WLC_GET_KEY_SEQ 183 -#define WLC_GET_SCAN_CHANNEL_TIME 184 -#define WLC_SET_SCAN_CHANNEL_TIME 185 -#define WLC_GET_SCAN_UNASSOC_TIME 186 -#define WLC_SET_SCAN_UNASSOC_TIME 187 -#define WLC_GET_SCAN_HOME_TIME 188 -#define WLC_SET_SCAN_HOME_TIME 189 -#define WLC_GET_SCAN_PASSES 190 -#define WLC_SET_SCAN_PASSES 191 -#define WLC_GET_PRB_RESP_TIMEOUT 192 -#define WLC_SET_PRB_RESP_TIMEOUT 193 -#define WLC_GET_ATTEN 194 -#define WLC_SET_ATTEN 195 -#define WLC_GET_SHMEM 196 /* diag */ -#define WLC_SET_SHMEM 197 /* diag */ -#define WLC_GET_GMODE_PROTECTION_CTS 198 -#define WLC_SET_GMODE_PROTECTION_CTS 199 -#define WLC_SET_TKIP_MIC_FLAG 200 -#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define WLC_TKIP_COUNTERMEASURES 202 -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_GET_INTERFERENCE_MODE 211 -#define WLC_SET_INTERFERENCE_MODE 212 -#define WLC_GET_CHANNEL_QA 213 -#define WLC_START_CHANNEL_QA 214 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_PWROUT_PERCENTAGE 220 -#define WLC_SET_PWROUT_PERCENTAGE 221 -#define WLC_SET_BAD_FRAME_PREEMPT 222 -#define WLC_GET_BAD_FRAME_PREEMPT 223 -#define WLC_SET_LEAP_LIST 224 -#define WLC_GET_LEAP_LIST 225 -#define WLC_GET_CWMIN 226 -#define WLC_SET_CWMIN 227 -#define WLC_GET_CWMAX 228 -#define WLC_SET_CWMAX 229 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 -#define WLC_SCAN_WITH_CALLBACK 240 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 -#define WLC_NVRAM_SET 265 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_LAST 273 /* do not change - use get_var/set_var */ - -/* - * Minor kludge alert: - * Duplicate a few definitions that irelay requires from epiioctl.h here - * so caller doesn't have to include this file and epiioctl.h . - * If this grows any more, it would be time to move these irelay-specific - * definitions out of the epiioctl.h and into a separate driver common file. - */ -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -/* vx wlc ioctl's offset */ -#define CMN_IOCTL_OFF 0x180 - -/* - * custom OID support - * - * 0xFF - implementation specific OID - * 0xE4 - first byte of Broadcom PCI vendor ID - * 0x14 - second byte of Broadcom PCI vendor ID - * 0xXX - the custom OID number - */ - -/* begin 0x1f values beyond the start of the ET driver range. */ -#define WL_OID_BASE 0xFFE41420 - -/* NDIS overrides */ -#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK) -#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK) -#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH) -#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS) - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1<<31) - - -/* Bus types */ -#define WL_SB_BUS 0 /* Silicon Backplane */ -#define WL_PCI_BUS 1 /* PCI target */ -#define WL_PCMCIA_BUS 2 /* PCMCIA target */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ -#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - - -/* 54g modes (basic bits may still be overridden) */ -#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */ - /* Preamble: Long */ - /* Shortslot: Off */ -#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ - /* Extended Rateset: 6, 9, 12, 48 */ - /* Preamble: Long */ - /* Shortslot: Auto */ -#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */ - /* Extended Rateset: 6b, 9, 12b, 48 */ - /* Preamble: Short required */ - /* Shortslot: Auto */ -#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */ - /* Extended Rateset: 6, 9, 12, 48 */ - /* Preamble: Long */ - /* Shortslot: On */ -#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */ - /* Preamble: Short required */ - /* Shortslot: On and required */ -#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */ - /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */ - /* Preamble: Long */ - /* Shortslot: Auto */ -#define GMODE_MAX 6 - - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override */ -#define WLC_G_PROTECTION_AUTO -1 -#define WLC_G_PROTECTION_OFF 0 -#define WLC_G_PROTECTION_ON 1 - -/* values for g_protection_control */ -#define WLC_G_PROTECTION_CTL_OFF 0 -#define WLC_G_PROTECTION_CTL_LOCAL 1 -#define WLC_G_PROTECTION_CTL_OVERLAP 2 - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 - -/* interference mitigation options */ -#define INTERFERE_NONE 0 /* off */ -#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ -#define WLAN_MANUAL 2 /* ACI: no auto detection */ -#define WLAN_AUTO 3 /* ACI: auto - detact */ - -/* Message levels */ -#define WL_ERROR_VAL 0x0001 -#define WL_TRACE_VAL 0x0002 -#define WL_PRHDRS_VAL 0x0004 -#define WL_PRPKT_VAL 0x0008 -#define WL_INFORM_VAL 0x0010 -#define WL_TMP_VAL 0x0020 -#define WL_OID_VAL 0x0040 -#define WL_RATE_VAL 0x0080 -#define WL_ASSOC_VAL 0x0100 -#define WL_PRUSR_VAL 0x0200 -#define WL_PS_VAL 0x0400 -#define WL_TXPWR_VAL 0x0800 -#define WL_GMODE_VAL 0x1000 -#define WL_DUAL_VAL 0x2000 -#define WL_WSEC_VAL 0x4000 -#define WL_WSEC_DUMP_VAL 0x8000 -#define WL_LOG_VAL 0x10000 -#define WL_NRSSI_VAL 0x20000 -#define WL_LOFT_VAL 0x40000 -#define WL_REGULATORY_VAL 0x80000 -#define WL_ACI_VAL 0x100000 - - -/* 802.11h enforcement levels */ -#define SPECT_MNGMT_OFF 0 /* 11h disabled */ -#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */ - /* when 11h is enabled */ -#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */ - - - -/* max # of leds supported by GPIO (gpio pin# == led index#) */ -#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ - -/* led per-pin behaviors */ -#define WL_LED_OFF 0 /* always off */ -#define WL_LED_ON 1 /* always on */ -#define WL_LED_ACTIVITY 2 /* activity */ -#define WL_LED_RADIO 3 /* radio enabled */ -#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -#define WL_LED_WI1 7 -#define WL_LED_WI2 8 -#define WL_LED_WI3 9 -#define WL_LED_ASSOC 10 /* associated state indicator */ -#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -#define WL_LED_NUMBEHAVIOR 12 - -/* led behavior numeric value format */ -#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ - - -/* maximum channels */ -#define WL_NUMCHANNELS 64 /* max # of channels in the band */ - -/* rate check */ -#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ - ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ - ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ - ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) - -/* WDS link local endpoint WPA role */ -#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ -#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ -#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ - -/* afterburner_override */ -#define ABO_AUTO -1 /* auto - no override */ -#define ABO_OFF 0 /* force afterburner off */ -#define ABO_ON 1 /* force afterburner on */ - -#define GMODE_AFTERBURNER 6 - -#undef PACKED - -#endif /* _wlioctl_h_ */ diff --git a/openwrt/package/openwrt/include/wlutils.h b/openwrt/package/openwrt/include/wlutils.h deleted file mode 100644 index 07e2536ca..000000000 --- a/openwrt/package/openwrt/include/wlutils.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Broadcom wireless network adapter utility functions - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#ifndef _wlutils_h_ -#define _wlutils_h_ - -#include <typedefs.h> -#include <wlioctl.h> - -/* - * Pass a wlioctl request to the specified interface. - * @param name interface name - * @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST - * @param buf buffer for passing in and/or receiving data - * @param len length of buf - * @return >= 0 if successful or < 0 otherwise - */ -extern int wl_ioctl(char *name, int cmd, void *buf, int len); - -/* - * Get the MAC (hardware) address of the specified interface. - * @param name interface name - * @param hwaddr 6-byte buffer for receiving address - * @return >= 0 if successful or < 0 otherwise - */ -extern int wl_hwaddr(char *name, unsigned char *hwaddr); - -/* - * Probe the specified interface. - * @param name interface name - * @return >= 0 if a Broadcom wireless device or < 0 otherwise - */ -extern int wl_probe(char *name); - -/* - * Set/Get named variable. - * @param name interface name - * @param var variable name - * @param val variable value/buffer - * @param len variable value/buffer length - * @return success == 0, failure != 0 - */ -extern int wl_set_val(char *name, char *var, void *val, int len); -extern int wl_get_val(char *name, char *var, void *val, int len); -extern int wl_set_int(char *name, char *var, int val); -extern int wl_get_int(char *name, char *var, int *val); - -#endif /* _wlutils_h_ */ diff --git a/openwrt/package/openwrt/jffs2root.c b/openwrt/package/openwrt/jffs2root.c deleted file mode 100644 index 36b928ff4..000000000 --- a/openwrt/package/openwrt/jffs2root.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * jffs2root.c - * - * Copyright (C) 2005 Mike Baker - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * $Id$ - * - */ - -#include <stdio.h> -#include <stdlib.h> -#include <stddef.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/mman.h> -#include <sys/stat.h> -#include <string.h> - -#include <sys/ioctl.h> -#include <linux/mtd/mtd.h> - -#define FILENAME "/dev/mtdblock/1" - -struct trx_header { - unsigned magic; /* "HDR0" */ - unsigned len; /* Length of file including header */ - unsigned crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned flag_version; /* 0:15 flags, 16:31 version */ - unsigned offsets[3]; /* Offsets of partitions from start of header */ -}; - -unsigned long *crc32; - -void init_crc32() -{ - unsigned long crc; - unsigned long poly = 0xEDB88320L; - int n, bit; - if ((crc32 = (unsigned long *) malloc(256 * sizeof(unsigned long))) == (void *)-1) { - perror("malloc"); - exit(1); - } - for (n = 0; n < 256; n++) { - crc = (unsigned long) n; - for (bit = 0; bit < 8; bit++) - crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1); - crc32[n] = crc; - } -} - -unsigned int crc32buf(char *buf, size_t len) -{ - unsigned int crc = 0xFFFFFFFF; - for (; len; len--, buf++) - crc = crc32[(crc ^ *buf) & 0xff] ^ (crc >> 8); - return crc; -} - -int main(int argc, char **argv) -{ - int fd; - struct mtd_info_user mtdInfo; - unsigned long len; - struct trx_header *ptr; - - if (((fd = open(FILENAME, O_RDWR)) < 0) - || ((len = lseek(fd, 0, SEEK_END)) < 0) - || ((ptr = (struct trx_header *) mmap(0, len, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1)) - || (ptr->magic != 0x30524448)) { - printf("Error reading trx info\n"); - exit(-1); - } - close (fd); - - if (((fd = open("/dev/mtd/1", O_RDWR)) < 0) - || (ioctl(fd, MEMGETINFO, &mtdInfo))) { - fprintf(stderr, "Could not get MTD device info from %s\n", FILENAME); - close(fd); - exit(1); - } - close(fd); - - if (argc > 1 && !strcmp(argv[1],"--move")) { - if (ptr->offsets[2] >= ptr->len) { - printf("Partition already moved outside trx\n"); - } else { - init_crc32(); - ptr->offsets[2] += (mtdInfo.erasesize - 1); - ptr->offsets[2] &= ~(mtdInfo.erasesize - 1); - ptr->len = ptr->offsets[2]; - ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version)); - msync(ptr,sizeof(struct trx_header),MS_SYNC|MS_INVALIDATE); - printf("Partition moved; please reboot\n"); - } - } else { - int x; - printf(" erase: 0x%08x\n",mtdInfo.erasesize); - printf("=== trx ===\n"); - printf("mapped: 0x%08x\n", (unsigned)ptr); - printf(" magic: 0x%08x\n", ptr->magic); - printf(" len: 0x%08x\n", ptr->len); - printf(" crc: 0x%08x\n", ptr->crc32); - for (x = 0; x < 3; x++) - printf(" offset[%d]: 0x%08x\n", x, ptr->offsets[x]); - } - - munmap((void *) ptr, len); - return 0; -} diff --git a/openwrt/package/openwrt/libnvram/Makefile b/openwrt/package/openwrt/libnvram/Makefile deleted file mode 100644 index a5b62848b..000000000 --- a/openwrt/package/openwrt/libnvram/Makefile +++ /dev/null @@ -1,46 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME:=libnvram -PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME) - -EXTRA_CFLAGS := -c -I. -I../include - -all: compile - -define OBJ_template -$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR) - $(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1)) -endef - -OBJS := nvram_linux.o nvram_convert.o main.o -LIBNVRAM_OBJS:= $(PKG_BUILD_DIR)/nvram_linux.o $(PKG_BUILD_DIR)/nvram_convert.o -$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj)))) - -$(PKG_BUILD_DIR): - mkdir -p $(PKG_BUILD_DIR) - -$(PKG_BUILD_DIR)/nvram: $(PKG_BUILD_DIR)/main.o $(PKG_BUILD_DIR)/libnvram.so - $(TARGET_CC) $(TARGET_CFLAGS) -o $@ $< -L$(PKG_BUILD_DIR) -lnvram - -$(PKG_BUILD_DIR)/libnvram.so: $(LIBNVRAM_OBJS) - $(TARGET_CC) -shared -o $@ $^ - -$(STAGING_DIR)/lib/libnvram.so: $(PKG_BUILD_DIR)/libnvram.so - install -m 644 $< $@ - -$(TARGET_DIR)/usr/lib/libnvram.so: $(PKG_BUILD_DIR)/libnvram.so - install -m 644 $< $@ - $(STRIP) $@ - -$(TARGET_DIR)/usr/sbin/nvram: $(PKG_BUILD_DIR)/nvram - mkdir -p $(TARGET_DIR)/usr/sbin - install -m 755 $< $@ - $(STRIP) $@ - -compile: $(PKG_BUILD_DIR)/libnvram.so $(STAGING_DIR)/lib/libnvram.so $(PKG_BUILD_DIR)/nvram -install: $(TARGET_DIR)/usr/lib/libnvram.so $(TARGET_DIR)/usr/sbin/nvram - -clean: - rm -rf $(PKG_BUILD_DIR) diff --git a/openwrt/package/openwrt/libnvram/main.c b/openwrt/package/openwrt/libnvram/main.c deleted file mode 100644 index a64430f7b..000000000 --- a/openwrt/package/openwrt/libnvram/main.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Frontend command-line utility for Linux NVRAM layer - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include <typedefs.h> -#include <bcmnvram.h> - -static void -usage(void) -{ - fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n"); - exit(0); -} - -/* NVRAM utility */ -int -main(int argc, char **argv) -{ - char *name, *value, buf[NVRAM_SPACE]; - int size; - - /* Skip program name */ - --argc; - ++argv; - - if (!*argv) - usage(); - - /* Process the remaining arguments. */ - for (; *argv; argv++) { - if (!strncmp(*argv, "get", 3)) { - if (*++argv) { - if ((value = nvram_get(*argv))) - puts(value); - } - } - else if (!strncmp(*argv, "set", 3)) { - if (*++argv) { - strncpy(value = buf, *argv, sizeof(buf)); - name = strsep(&value, "="); - nvram_set(name, value); - } - } - else if (!strncmp(*argv, "unset", 5)) { - if (*++argv) - nvram_unset(*argv); - } - else if (!strncmp(*argv, "commit", 5)) { - nvram_commit(); - } - else if (!strncmp(*argv, "show", 4) || - !strncmp(*argv, "getall", 6)) { - nvram_getall(buf, sizeof(buf)); - for (name = buf; *name; name += strlen(name) + 1) - puts(name); - size = sizeof(struct nvram_header) + (int) name - (int) buf; - fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size); - } - if (!*argv) - break; - } - - return 0; -} diff --git a/openwrt/package/openwrt/libnvram/nvram_convert.c b/openwrt/package/openwrt/libnvram/nvram_convert.c deleted file mode 100644 index 485909026..000000000 --- a/openwrt/package/openwrt/libnvram/nvram_convert.c +++ /dev/null @@ -1,77 +0,0 @@ - -#define WL(a) "wl_"a -#define WL0(a) "wl0_"a -#define D11G(a) "d11g_"a - -#define PPP(a) "ppp_"a -#define PPPOE(a) "pppoe_"a - -struct nvram_convert { - char *name; // for WEB - char *wl0_name; // for driver - char *d11g_name; // for old nv name -}; - -struct nvram_convert nvram_converts[] = { - // Bellow change from 3.11.48.7 - { WL("ssid"), WL0("ssid"), ""}, - { WL("radio"), WL0("mode"), ""}, - { WL("mode"), WL0("mode"), ""}, - { WL("wds"), WL0("wds"), ""}, - { WL("auth"), WL0("auth"), ""}, - { WL("key"), WL0("key"), ""}, - { WL("key1"), WL0("key1"), ""}, - { WL("key2"), WL0("key2"), ""}, - { WL("key3"), WL0("key3"), ""}, - { WL("key4"), WL0("key4"), ""}, - { WL("maclist"), WL0("maclist"), ""}, - { WL("channel"), WL0("channel"), D11G("channel")}, - { WL("rateset"), WL0("rateset"), D11G("rateset")}, - { WL("rts"), WL0("rts"), D11G("rts")}, - { WL("bcn"), WL0("bcn"), D11G("bcn")}, - { WL("gmode"), WL0("gmode"), "d11g_mode"}, - { WL("unit"), WL0("unit"), ""}, - { WL("ifname"), WL0("ifname"), ""}, - { WL("phytype"), WL0("phytype"), ""}, - { WL("country"), WL0("country"), ""}, - { WL("closed"), WL0("closed"), ""}, - { WL("lazywds"), WL0("lazywds"), ""}, - { WL("wep"), WL0("wep"), ""}, - { WL("macmode"), WL0("macmode"), ""}, - { WL("rate"), WL0("rate"), D11G("rate")}, - { WL("frag"), WL0("frag"), D11G("frag")}, - { WL("dtim"), WL0("dtim"), D11G("dtim")}, - { WL("plcphdr"), WL0("plcphdr"), ""}, - { WL("gmode_protection"), WL0("gmode_protection"), ""}, - { WL("radio"), WL0("radio"), ""}, - // Bellow change from 3.21.9.0 - { WL("auth_mode"), WL0("auth_mode"), ""}, - { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""}, - { WL("radius_port"), WL0("radius_port"), ""}, - { WL("radius_key"), WL0("radius_key"), ""}, - { WL("wpa_psk"), WL0("wpa_psk"), ""}, - { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""}, - { WL("frameburst"), WL0("frameburst"), ""}, - { WL("crypto"), WL0("crypto"), ""}, - { WL("ap_isolate"), WL0("ap_isolate"), ""}, - { WL("afterburner"), WL0("afterburner"), ""}, - // for PPPoE - { PPP("username"), PPPOE("username"), ""}, - { PPP("passwd"), PPPOE("passwd"), ""}, - { PPP("idletime"), PPPOE("idletime"), ""}, - { PPP("keepalive"), PPPOE("keepalive"), ""}, - { PPP("demand"), PPPOE("demand"), ""}, - { PPP("service"), PPPOE("service"), ""}, - { PPP("ac"), PPPOE("ac"), ""}, - { PPP("static"), PPPOE("static"), ""}, - { PPP("static_ip"), PPPOE("static_ip"), ""}, - { PPP("username_1"), PPPOE("username_1"), ""}, - { PPP("passwd_1"), PPPOE("passwd_1"), ""}, - { PPP("idletime_1"), PPPOE("idletime_1"), ""}, - { PPP("keepalive_1"), PPPOE("keepalive_1"), ""}, - { PPP("demand_1"), PPPOE("demand_1"), ""}, - { PPP("service_1"), PPPOE("service_1"), ""}, - { PPP("ac_1"), PPPOE("ac_1"), ""}, - - { 0, 0, 0}, -}; diff --git a/openwrt/package/openwrt/libnvram/nvram_convert.h b/openwrt/package/openwrt/libnvram/nvram_convert.h deleted file mode 100644 index 70e12327d..000000000 --- a/openwrt/package/openwrt/libnvram/nvram_convert.h +++ /dev/null @@ -1,7 +0,0 @@ - -struct nvram_convert { - char *name; - char *wl0_name; - char *d11g_name; -}; - diff --git a/openwrt/package/openwrt/libnvram/nvram_linux.c b/openwrt/package/openwrt/libnvram/nvram_linux.c deleted file mode 100644 index c41e32118..000000000 --- a/openwrt/package/openwrt/libnvram/nvram_linux.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * NVRAM variable manipulation (Linux user mode half) - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <errno.h> -#include <error.h> -#include <string.h> -#include <sys/ioctl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <sys/mman.h> - -#include <typedefs.h> -#include <bcmnvram.h> -#include <nvram_convert.h> -#include <shutils.h> -#include <utils.h> - -#define PATH_DEV_NVRAM "/dev/nvram" - -/* Globals */ -static int nvram_fd = -1; -static char *nvram_buf = NULL; -int check_action(void); -int file_to_buf(char *path, char *buf, int len); - -int -nvram_init(void *unused) -{ - if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0) - goto err; - - /* Map kernel string buffer into user space */ - if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) { - close(nvram_fd); - nvram_fd = -1; - goto err; - } - - return 0; - - err: - perror(PATH_DEV_NVRAM); - return errno; -} - -char * -nvram_get(const char *name) -{ - size_t count = strlen(name) + 1; - char tmp[100], *value; - unsigned long *off = (unsigned long *) tmp; - - if (nvram_fd < 0) - if (nvram_init(NULL)) - return NULL; - - if (count > sizeof(tmp)) { - if (!(off = malloc(count))) - return NULL; - } - - /* Get offset into mmap() space */ - strcpy((char *) off, name); - - count = read(nvram_fd, off, count); - - if (count == sizeof(unsigned long)) - value = &nvram_buf[*off]; - else - value = NULL; - - if (count < 0) - perror(PATH_DEV_NVRAM); - - if (off != (unsigned long *) tmp) - free(off); - - return value; -} - -int -nvram_getall(char *buf, int count) -{ - int ret; - - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - if (count == 0) - return 0; - - /* Get all variables */ - *buf = '\0'; - - ret = read(nvram_fd, buf, count); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - return (ret == count) ? 0 : ret; -} - -static int -_nvram_set(const char *name, const char *value) -{ - size_t count = strlen(name) + 1; - char tmp[100], *buf = tmp; - int ret; - - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - /* Unset if value is NULL */ - if (value) - count += strlen(value) + 1; - - if (count > sizeof(tmp)) { - if (!(buf = malloc(count))) - return -ENOMEM; - } - - if (value) - sprintf(buf, "%s=%s", name, value); - else - strcpy(buf, name); - - ret = write(nvram_fd, buf, count); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - if (buf != tmp) - free(buf); - - return (ret == count) ? 0 : ret; -} - -int -nvram_set(const char *name, const char *value) -{ - extern struct nvram_convert nvram_converts[]; - struct nvram_convert *v; - int ret; - - ret = _nvram_set(name, value); - - for(v = nvram_converts ; v->name ; v++) { - if(!strcmp(v->name, name)){ - if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value); - if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value); - } - } - - return ret; -} - -int -nvram_unset(const char *name) -{ - return _nvram_set(name, NULL); -} - -int -nvram_commit(void) -{ - int ret; - - cprintf("nvram_commit(): start\n"); - - if((check_action() == ACT_IDLE) || - (check_action() == ACT_SW_RESTORE) || - (check_action() == ACT_HW_RESTORE)){ - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - cprintf("nvram_commit(): end\n"); - } - else - cprintf("nvram_commit(): nothing to do...\n"); - - return ret; -} - -int file2nvram(char *filename, char *varname) { - FILE *fp; - int c,count; - int i=0,j=0; - char mem[10000],buf[30000]; - - if ( !(fp=fopen(filename,"rb") )) - return 0; - - count=fread(mem,1,sizeof(mem),fp); - fclose(fp); - for (j=0;j<count;j++) { - if (i > sizeof(buf)-3 ) - break; - c=mem[j]; - if (c >= 32 && c <= 126 && c != '\\' && c != '~') { - buf[i++]=(unsigned char) c; - } else if (c==0) { - buf[i++]='~'; - } else { - buf[i++]='\\'; - sprintf(buf+i,"%02X",c); - i+=2; - } - } - if (i==0) return 0; - buf[i]=0; - //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf); - nvram_set(varname,buf); - //nvram_commit(); //Barry adds for test -} - -int nvram2file(char *varname, char *filename) { - FILE *fp; - int c,tmp; - int i=0,j=0; - char *buf; - char mem[10000]; - - if ( !(fp=fopen(filename,"wb") )) - return 0; - - buf=strdup(nvram_safe_get(varname)); - //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf); - while ( buf[i] && j < sizeof(mem)-3 ) { - if (buf[i] == '\\') { - i++; - tmp=buf[i+2]; - buf[i+2]=0; - sscanf(buf+i,"%02X",&c); - buf[i+2]=tmp; - i+=2; - mem[j]=c;j++; - } else if (buf[i] == '~') { - mem[j]=0;j++; - i++; - } else { - mem[j]=buf[i];j++; - i++; - } - } - if (j<=0) return j; - j=fwrite(mem,1,j,fp); - fclose(fp); - free(buf); - return j; -} - -int -check_action(void) -{ - char buf[80] = ""; - - if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){ - if(!strcmp(buf, "ACT_TFTP_UPGRADE")){ - cprintf("Upgrading from tftp now, quiet exit....\n"); - return ACT_TFTP_UPGRADE; - } - else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){ - cprintf("Upgrading from web (https) now, quiet exit....\n"); - return ACT_WEBS_UPGRADE; - } - else if(!strcmp(buf, "ACT_WEB_UPGRADE")){ - cprintf("Upgrading from web (http) now, quiet exit....\n"); - return ACT_WEB_UPGRADE; - } - else if(!strcmp(buf, "ACT_SW_RESTORE")){ - cprintf("Receive restore command from web, quiet exit....\n"); - return ACT_SW_RESTORE; - } - else if(!strcmp(buf, "ACT_HW_RESTORE")){ - cprintf("Receive restore commond from resetbutton, quiet exit....\n"); - return ACT_HW_RESTORE; - } - } - //fprintf(stderr, "Waiting for upgrading....\n"); - return ACT_IDLE; -} - -int -file_to_buf(char *path, char *buf, int len) -{ - FILE *fp; - - memset(buf, 0 , len); - - if ((fp = fopen(path, "r"))) { - fgets(buf, len, fp); - fclose(fp); - return 1; - } - - return 0; -} diff --git a/openwrt/package/openwrt/libshared/Makefile b/openwrt/package/openwrt/libshared/Makefile deleted file mode 100644 index 4309c8ce6..000000000 --- a/openwrt/package/openwrt/libshared/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME:=libshared -PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME) - -EXTRA_CFLAGS := -c -I. -I../include - -all: compile - -LIBSHARED_OBJS:= -define OBJ_template -$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR) - $(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1)) -LIBSHARED_OBJS += $(PKG_BUILD_DIR)/$(1) -endef - -OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o -$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj)))) - - -$(PKG_BUILD_DIR): - mkdir -p $(PKG_BUILD_DIR) - -$(PKG_BUILD_DIR)/libshared.so: $(LIBSHARED_OBJS) - $(TARGET_CC) -shared -o $@ $^ - -$(STAGING_DIR)/lib/libshared.so: $(PKG_BUILD_DIR)/libshared.so - install -m 644 $< $@ - -$(TARGET_DIR)/usr/lib/libshared.so: $(PKG_BUILD_DIR)/libshared.so - install -m 644 $^ $@ - $(STRIP) $@ - -compile: $(PKG_BUILD_DIR)/libshared.so $(STAGING_DIR)/lib/libshared.so -install: $(TARGET_DIR)/usr/lib/libshared.so - -clean: - rm -rf $(PKG_BUILD_DIR) diff --git a/openwrt/package/openwrt/libshared/bcmtimer.h b/openwrt/package/openwrt/libshared/bcmtimer.h deleted file mode 100644 index 3db9e624f..000000000 --- a/openwrt/package/openwrt/libshared/bcmtimer.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Low resolution timer interface. Timer handlers may be called - * in a deferred manner in a different task context after the - * timer expires or in the task context from which the timer - * was created, depending on the implementation. - * - * $Id$ - */ -#ifndef __bcmtimer_h__ -#define __bcmtimer_h__ - -/* ANSI headers */ -#include <time.h> - -/* timer ID */ -typedef unsigned int bcm_timer_module_id; -typedef unsigned int bcm_timer_id; - -/* timer callback */ -typedef void (*bcm_timer_cb)(bcm_timer_id id, int data); - -/* OS-independant interfaces, applications should call these functions only */ -int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id); -int bcm_timer_module_cleanup(bcm_timer_module_id module_id); -int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable); -int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id); -int bcm_timer_delete(bcm_timer_id timer_id); -int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value); -int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value); -int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data); -int bcm_timer_cancel(bcm_timer_id timer_id); -int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec); - -#endif /* #ifndef __bcmtimer_h__ */ diff --git a/openwrt/package/openwrt/libshared/defaults.c b/openwrt/package/openwrt/libshared/defaults.c deleted file mode 100644 index 119eaac72..000000000 --- a/openwrt/package/openwrt/libshared/defaults.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Router default NVRAM values - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include <epivers.h> -#include <string.h> -#include <bcmnvram.h> -#include <typedefs.h> -#include <wlioctl.h> - -#define XSTR(s) STR(s) -#define STR(s) #s - -struct nvram_tuple router_defaults[] = { - /* OS parameters */ - { "os_name", "", 0 }, /* OS name string */ - { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */ - { "os_date", __DATE__, 0 }, /* OS date */ - - /* Miscellaneous parameters */ - { "timer_interval", "3600", 0 }, /* Timer interval in seconds */ - { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */ - { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */ - { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */ - { "upnp_enable", "0", 0 }, /* Start UPnP */ - { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */ - { "ezc_version", "1", 0 }, /* EZConfig version */ - { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/ - { "os_server", "", 0 }, /* URL for getting upgrades */ - { "stats_server", "", 0 }, /* URL for posting stats */ - { "console_loglevel", "1", 0 }, /* Kernel panics only */ - - /* Big switches */ - { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */ - { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */ - - { "log_ipaddr", "", 0 }, /* syslog recipient */ - - /* LAN H/W parameters */ - { "lan_ifname", "", 0 }, /* LAN interface name */ - { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */ - { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */ - { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */ - - /* LAN TCP/IP parameters */ - { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */ - { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */ - { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */ - { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */ - { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "lan_domain", "", 0 }, /* LAN domain name */ - { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */ - - /* WAN H/W parameters */ - { "wan_ifname", "", 0 }, /* WAN interface name */ - { "wan_ifnames", "", 0 }, /* WAN interface names */ - { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */ - { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */ - - /* WAN TCP/IP parameters */ - { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */ - { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */ - { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */ - { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */ - { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "wan_hostname", "", 0 }, /* WAN hostname */ - { "wan_domain", "", 0 }, /* WAN domain name */ - { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */ - - /* PPPoE parameters */ - { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */ - { "wan_pppoe_username", "", 0 }, /* PPP username */ - { "wan_pppoe_passwd", "", 0 }, /* PPP password */ - { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */ - { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */ - { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */ - { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */ - { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */ - { "wan_pppoe_service", "", 0 }, /* PPPoE service name */ - { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */ - - /* Misc WAN parameters */ - { "wan_desc", "", 0 }, /* WAN connection description */ - { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */ - { "wan_primary", "0", 0 }, /* Primary wan connection */ - - { "wan_unit", "0", 0 }, /* Last configured connection */ - - /* Filters */ - { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ - { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */ - - /* Port forwards */ - { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */ - { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */ - { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */ - - /* DHCP server parameters */ - { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */ - { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */ - { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */ - { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */ - - /* Web server parameters */ - { "http_username", "", 0 }, /* Username */ - { "http_passwd", "admin", 0 }, /* Password */ - { "http_wanport", "", 0 }, /* WAN port to listen on */ - { "http_lanport", "80", 0 }, /* LAN port to listen on */ - - /* Wireless parameters */ - { "wl_ifname", "", 0 }, /* Interface name */ - { "wl_hwaddr", "", 0 }, /* MAC address */ - { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */ - { "wl_corerev", "", 0 }, /* Current core revision */ - { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */ - { "wl_radioids", "", 0 }, /* List of radio IDs */ - { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */ - { "wl_country", "", 0 }, /* Country (default obtained from driver) */ - { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */ - { "wl_closed", "0", 0 }, /* Closed (hidden) network */ - { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */ - { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */ - { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */ - { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */ - { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */ - { "wl_key", "1", 0 }, /* Current WEP key */ - { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ - { "wl_channel", "11", 0 }, /* Channel number */ - { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */ - { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */ - { "wl_frag", "2346", 0 }, /* Fragmentation threshold */ - { "wl_rts", "2347", 0 }, /* RTS threshold */ - { "wl_dtim", "1", 0 }, /* DTIM period */ - { "wl_bcn", "100", 0 }, /* Beacon interval */ - { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */ - { "wl_net_mode", "mixed", 0 }, /* 54g mode */ - { "wl_gmode", "6", 0 }, /* 54g mode */ - { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */ - { "wl_afterburner", "auto", 0 }, /* AfterBurner */ - { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */ - { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */ - { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */ - - /* WPA parameters */ - { "security_mode", "open", 0 }, - { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */ - { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */ - { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */ - { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */ - { "wl_radius_key", "", 0 }, /* RADIUS shared secret */ - { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */ - { "wl_crypto", "tkip", 0 }, /* WPA data encryption */ - - - { "wl_unit", "0", 0 }, /* Last configured interface */ - - /* Restore defaults */ - { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */ - - { 0, 0, 0 } -}; diff --git a/openwrt/package/openwrt/libshared/linux_timer.c b/openwrt/package/openwrt/libshared/linux_timer.c deleted file mode 100644 index 0402e4437..000000000 --- a/openwrt/package/openwrt/libshared/linux_timer.c +++ /dev/null @@ -1,738 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Low resolution timer interface linux specific implementation. - * - * $Id$ - */ - -/* -* debug facilities -*/ -#define TIMER_DEBUG 0 -#if TIMER_DEBUG -#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args) -#else -#define TIMERDBG(fmt, args...) -#endif - - -/* - * POSIX timer support for Linux. Taken from linux_timer.c in upnp - */ - -#define __USE_GNU - - -#include <stdlib.h> // for malloc, free, etc. -#include <string.h> // for memset, strncasecmp, etc. -#include <assert.h> // for assert, of course. -#include <signal.h> // for sigemptyset, etc. -#include <stdio.h> // for printf, etc. -#include <sys/time.h> -#include <time.h> - -/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are. - For each expiring timer the code will print the expected time interval and the actual time interval. -#define TIMER_PROFILE -*/ -#undef TIMER_PROFILE - -/* -timer_cancel( ) - cancel a timer -timer_connect( ) - connect a user routine to the timer signal -timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX) -timer_delete( ) - remove a previously created timer (POSIX) -timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX) -timer_getoverrun( ) - return the timer expiration overrun (POSIX) -timer_settime( ) - set the time until the next expiration and arm timer (POSIX) -nanosleep( ) - suspend the current task until the time interval elapses (POSIX) -*/ - -#define MS_PER_SEC 1000 -#define US_PER_SEC 1000000 -#define US_PER_MS 1000 -#define UCLOCKS_PER_SEC 1000000 - -typedef void (*event_callback_t)(timer_t, int); - -#ifndef TIMESPEC_TO_TIMEVAL -# define TIMESPEC_TO_TIMEVAL(tv, ts) { \ - (tv)->tv_sec = (ts)->tv_sec; \ - (tv)->tv_usec = (ts)->tv_nsec / 1000; \ -} -#endif - -#ifndef TIMEVAL_TO_TIMESPEC -# define TIMEVAL_TO_TIMESPEC(tv, ts) { \ - (ts)->tv_sec = (tv)->tv_sec; \ - (ts)->tv_nsec = (tv)->tv_usec * 1000; \ -} -#endif - -#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) - -#define timerroundup(t,g) \ - do { \ - if (!timerisset(t)) (t)->tv_usec=1; \ - if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \ - } while (0) - -typedef long uclock_t; - -#define TFLAG_NONE 0 -#define TFLAG_CANCELLED (1<<0) -#define TFLAG_DELETED (1<<1) - -struct event { - struct timeval it_interval; - struct timeval it_value; - event_callback_t func; - int arg; - unsigned short flags; - struct event *next; -#ifdef TIMER_PROFILE - uint expected_ms; - uclock_t start; -#endif -}; - -void timer_cancel(timer_t timerid); - -static void alarm_handler(int i); -static void check_event_queue(); -static void print_event_queue(); -static void check_timer(); -#if THIS_FINDS_USE -static int count_queue(struct event *); -#endif -static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec); -void block_timer(); -void unblock_timer(); - -static struct event *event_queue = NULL; -static struct event *event_freelist; -static uint g_granularity; -static int g_maxevents = 0; - -uclock_t uclock() -{ - struct timeval tv; - - gettimeofday(&tv, NULL); - return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec); -} - - -void init_event_queue(int n) -{ - int i; - struct itimerval tv; - - g_maxevents = n; - event_freelist = (struct event *) malloc(n * sizeof(struct event)); - memset(event_freelist, 0, n * sizeof(struct event)); - - for (i = 0; i < (n-1); i++) - event_freelist[i].next = &event_freelist[i+1]; - - event_freelist[i].next = NULL; - - tv.it_interval.tv_sec = 0; - tv.it_interval.tv_usec = 1; - tv.it_value.tv_sec = 0; - tv.it_value.tv_usec = 0; - setitimer (ITIMER_REAL, &tv, 0); - setitimer (ITIMER_REAL, 0, &tv); - g_granularity = tv.it_interval.tv_usec; - - signal(SIGALRM, alarm_handler); -} - - -int clock_gettime( - clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ - struct timespec * tp /* where to store current time */ -) -{ - struct timeval tv; - int n; - - - n = gettimeofday(&tv, NULL); - TIMEVAL_TO_TIMESPEC(&tv, tp); - - return n; -} - - -int timer_create( - clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ - struct sigevent * evp, /* user event handler */ - timer_t * pTimer /* ptr to return value */ -) -{ - struct event *event; - - if (clock_id != CLOCK_REALTIME) { - TIMERDBG("timer_create can only support clock id CLOCK_REALTIME"); - exit(1); - } - - if (evp != NULL) { - if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) { - TIMERDBG("timer_create can only support signalled alarms using SIGALRM"); - exit(1); - } - } - - event = event_freelist; - if (event == NULL) { - print_event_queue(); - } - assert(event != NULL); - - event->flags = TFLAG_NONE; - - event_freelist = event->next; - event->next = NULL; - - check_event_queue(); - - *pTimer = (timer_t) event; - - return 0; -} - -int timer_delete( - timer_t timerid /* timer ID */ -) -{ - struct event *event = (struct event *) timerid; - - if (event->flags & TFLAG_DELETED) { - TIMERDBG("Cannot delete a deleted event"); - return 1; - } - - timer_cancel(timerid); - - event->flags |= TFLAG_DELETED; - - event->next = event_freelist; - event_freelist = event; - - return 0; -} - -int timer_connect -( - timer_t timerid, /* timer ID */ - void (*routine)(timer_t, int), /* user routine */ - int arg /* user argument */ -) -{ - struct event *event = (struct event *) timerid; - - assert(routine != NULL); - event->func = routine; - event->arg = arg; - - return 0; -} - -/* - * Please Call this function only from the call back functions of the alarm_handler. - * This is just a hack -*/ -int timer_change_settime -( - timer_t timerid, /* timer ID */ - const struct itimerspec * value /* time to be set */ -) -{ - struct event *event = (struct event *) timerid; - - TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); - TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); - - return 1; -} - -int timer_settime -( - timer_t timerid, /* timer ID */ - int flags, /* absolute or relative */ - const struct itimerspec * value, /* time to be set */ - struct itimerspec * ovalue /* previous time set (NULL=no result) */ -) -{ - struct itimerval itimer; - struct event *event = (struct event *) timerid; - struct event **ppevent; - - TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); - TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); - - /* if .it_value is zero, the timer is disarmed */ - if (!timerisset(&event->it_value)) { - timer_cancel(timerid); - return 0; - } - - block_timer(); - -#ifdef TIMER_PROFILE - event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); - event->start = uclock(); -#endif - if (event->next) { - TIMERDBG("calling timer_settime with a timer that is already on the queue."); - } - - - /* We always want to make sure that the event at the head of the - queue has a timeout greater than the itimer granularity. - Otherwise we end up with the situation that the time remaining - on an itimer is greater than the time at the head of the queue - in the first place. */ - timerroundup(&event->it_value, g_granularity); - - timerclear(&itimer.it_value); - getitimer(ITIMER_REAL, &itimer); - if (timerisset(&itimer.it_value)) { - // reset the top timer to have an interval equal to the remaining interval - // when the timer was cancelled. - if (event_queue) { - if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { - // it is an error if the amount of time remaining is more than the amount of time - // requested by the top event. - // - TIMERDBG("timer_settime: TIMER ERROR!"); - - } else { - // some portion of the top event has already expired. - // Reset the interval of the top event to remaining - // time left in that interval. - // - event_queue->it_value = itimer.it_value; - - // if we were the earliest timer before now, we are still the earliest timer now. - // we do not need to reorder the list. - } - } - } - - // Now, march down the list, decrementing the new timer by the - // current it_value of each event on the queue. - ppevent = &event_queue; - while (*ppevent) { - if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { - // if the proposed event will trigger sooner than the next event - // in the queue, we will insert the new event just before the next one. - // - // we also need to adjust the delta value to the next event. - timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); - break; - } - // subtract the interval of the next event from the proposed interval. - timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); - - ppevent = &((*ppevent)->next); - } - - // we have found our proper place in the queue, - // link our new event into the pending event queue. - event->next = *ppevent; - *ppevent = event; - - check_event_queue(); - - // if our new event ended up at the front of the queue, reissue the timer. - if (event == event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - - // we want to be sure to never turn off the timer completely, - // so if the next interval is zero, set it to some small value. - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - assert(!timerisset(&itimer.it_interval)); - assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); - assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } - - event->flags &= ~TFLAG_CANCELLED; - - unblock_timer(); - - return 0; -} - -static void check_timer() -{ - struct itimerval itimer; - - getitimer(ITIMER_REAL, &itimer); - if (timerisset(&itimer.it_interval)) { - TIMERDBG("ERROR timer interval is set."); - } - if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { - TIMERDBG("ERROR timer expires later than top event."); - } -} - - -static void check_event_queue() -{ - struct timeval sum; - struct event *event; - int i = 0; - -#ifdef notdef - int nfree = 0; - struct event *p; - for (p = event_freelist; p; p = p->next) - nfree++; - printf("%d free events\n", nfree); -#endif - - timerclear(&sum); - for (event = event_queue; event; event = event->next) { - if (i > g_maxevents) { - TIMERDBG("timer queue looks like it loops back on itself!"); - print_event_queue(); - exit(1); - } - i++; - } -} - -#if THIS_FINDS_USE -/* The original upnp version has this unused function, so I left it in - to maintain the resemblance. */ -static int count_queue(struct event *event_queue) -{ - struct event *event; - int i = 0; - for (event = event_queue; event; event = event->next) - i++; - return i; -} -#endif - -static void print_event_queue() -{ - struct event *event; - int i = 0; - - for (event = event_queue; event; event = event->next) { - printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n", - i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func); - if (i > g_maxevents) { - printf("...(giving up)\n"); - break; - } - } -} - -// The top element of the event queue must have expired. -// Remove that element, run its function, and reset the timer. -// if there is no interval, recycle the event structure. -static void alarm_handler(int i) -{ - struct event *event, **ppevent; - struct itimerval itimer; - struct timeval small_interval = { 0, g_granularity/2 }; -#ifdef TIMER_PROFILE - uint junk; - uclock_t end; - uint actual; -#endif - - block_timer(); - - // Loop through the event queue and remove the first event plus any - // subsequent events that will expire very soon thereafter (within 'small_interval'}. - // - do { - // remove the top event. - event = event_queue; - event_queue = event_queue->next; - event->next = NULL; - -#ifdef TIMER_PROFILE - end = uclock(); - actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)); - if (actual < 0) - junk = end; - TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000))); -#endif - - // call the event callback function - (*(event->func))((timer_t) event, (int)event->arg); - - /* If the event has been cancelled, do NOT put it back on the queue. */ - if ( !(event->flags & TFLAG_CANCELLED) ) { - - // if the event is a recurring event, reset the timer and - // find its correct place in the sorted list of events. - // - if (timerisset(&event->it_interval)) { - // event is recurring... - // - event->it_value = event->it_interval; -#ifdef TIMER_PROFILE - event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); - event->start = uclock(); -#endif - timerroundup(&event->it_value, g_granularity); - - // Now, march down the list, decrementing the new timer by the - // current delta of each event on the queue. - ppevent = &event_queue; - while (*ppevent) { - if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { - // if the proposed event will trigger sooner than the next event - // in the queue, we will insert the new event just before the next one. - // - // we also need to adjust the delta value to the next event. - timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); - break; - } - timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); - ppevent = &((*ppevent)->next); - } - - // we have found our proper place in the queue, - // link our new event into the pending event queue. - event->next = *ppevent; - *ppevent = event; - } else { - // there is no interval, so recycle the event structure. - //timer_delete((timer_t) event); - } - } - - check_event_queue(); - - } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <)); - - // re-issue the timer... - if (event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - // we want to be sure to never turn off the timer completely, - // so if the next interval is zero, set it to some small value. - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } else { - TIMERDBG("There are no events in the queue - timer not reset."); - } - - unblock_timer(); -} - -static int block_count = 0; - -void block_timer() -{ - sigset_t set; - - if (block_count++ == 0) { - sigemptyset(&set); - sigaddset(&set, SIGALRM); - sigprocmask(SIG_BLOCK, &set, NULL); - } -} - -void unblock_timer() -{ - sigset_t set; - - if (--block_count == 0) { - sigemptyset(&set); - sigaddset(&set, SIGALRM); - sigprocmask(SIG_UNBLOCK, &set, NULL); - } -} - -void timer_cancel_all() -{ - struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; - struct event *event; - struct event **ppevent; - - setitimer(ITIMER_REAL, &timeroff, NULL); - - ppevent = &event_queue; - while (*ppevent) { - event = *ppevent; - *ppevent = event->next; - event->next = NULL; - } -} - - - -void timer_cancel(timer_t timerid) -{ - struct itimerval itimer; - struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; - struct event *event = (struct event *) timerid; - struct event **ppevent; - - if (event->flags & TFLAG_CANCELLED) { - TIMERDBG("Cannot cancel a cancelled event"); - return; - } - - block_timer(); - - ppevent = &event_queue; - while (*ppevent) { - if ( *ppevent == event ) { - - /* RACE CONDITION - if the alarm goes off while we are in - this loop, and if the timer we want to cancel is the - next to expire, the alarm will end up firing - after this routine is complete, causing it to go off early. */ - - /* If the cancelled timer is the next to expire, - we need to do something special to clean up correctly. */ - if (event == event_queue && event->next != NULL) { - timerclear(&itimer.it_value); - getitimer(ITIMER_REAL, &itimer); - - /* subtract the time that has already passed while waiting for this timer... */ - timersub(&(event->it_value), &(itimer.it_value), &(event->it_value)); - - /* and add any remainder to the next timer in the list */ - timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value)); - } - - *ppevent = event->next; - event->next = NULL; - - if (event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - - /* We want to be sure to never turn off the timer - completely if there are more events on the queue, - so if the next interval is zero, set it to some - small value. */ - - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); - assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } else { - setitimer(ITIMER_REAL, &timeroff, NULL); - } - break; - } - ppevent = &((*ppevent)->next); - } - - event->flags |= TFLAG_CANCELLED; - - unblock_timer(); -} - -/* -* timer related headers -*/ -#include "bcmtimer.h" - -/* -* locally used global variables and constants -*/ - -/* -* Initialize internal resources used in the timer module. It must be called -* before any other timer function calls. The param 'timer_entries' is used -* to pre-allocate fixed number of timer entries. -*/ -int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id) -{ - init_event_queue(timer_entries); - *module_id = (bcm_timer_module_id)event_freelist; - return 0; -} - -/* -* Cleanup internal resources used by this timer module. It deletes all -* pending timer entries from the backend timer system as well. -*/ -int bcm_timer_module_cleanup(bcm_timer_module_id module_id) -{ - module_id = 0; - return 0; -} - -/* Enable/Disable timer module */ -int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable) -{ - if (enable) - unblock_timer(); - else - block_timer(); - return 0; -} - -int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id) -{ - module_id = 0; - return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id); -} - -int bcm_timer_delete(bcm_timer_id timer_id) -{ - return timer_delete((timer_t)timer_id); -} - -int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec) -{ - return -1; -} - -int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) -{ - return timer_settime((timer_t)timer_id, 0, timer_spec, NULL); -} - -int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data) -{ - return timer_connect((timer_t)timer_id, (void *)func, data); -} - -int bcm_timer_cancel(bcm_timer_id timer_id) -{ - timer_cancel((timer_t)timer_id); - return 0; -} -int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) -{ - timer_change_settime((timer_t)timer_id, timer_spec); - return 1; -} diff --git a/openwrt/package/openwrt/libshared/shutils.c b/openwrt/package/openwrt/libshared/shutils.c deleted file mode 100644 index 49ad41af8..000000000 --- a/openwrt/package/openwrt/libshared/shutils.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Shell-like utility functions - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include <stdio.h> -#include <stdlib.h> -#include <stdarg.h> -#include <errno.h> -#include <error.h> -#include <fcntl.h> -#include <limits.h> -#include <unistd.h> -#include <signal.h> -#include <string.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/wait.h> -#include <termios.h> -#include <sys/ioctl.h> -#include <sys/time.h> -#include <net/ethernet.h> - -#include <shutils.h> - -/* - * Reads file and returns contents - * @param fd file descriptor - * @return contents of file or NULL if an error occurred - */ -char * -fd2str(int fd) -{ - char *buf = NULL; - size_t count = 0, n; - - do { - buf = realloc(buf, count + 512); - n = read(fd, buf + count, 512); - if (n < 0) { - free(buf); - buf = NULL; - } - count += n; - } while (n == 512); - - close(fd); - if (buf) - buf[count] = '\0'; - return buf; -} - -/* - * Reads file and returns contents - * @param path path to file - * @return contents of file or NULL if an error occurred - */ -char * -file2str(const char *path) -{ - int fd; - - if ((fd = open(path, O_RDONLY)) == -1) { - perror(path); - return NULL; - } - - return fd2str(fd); -} - -/* - * Waits for a file descriptor to change status or unblocked signal - * @param fd file descriptor - * @param timeout seconds to wait before timing out or 0 for no timeout - * @return 1 if descriptor changed status or 0 if timed out or -1 on error - */ -int -waitfor(int fd, int timeout) -{ - fd_set rfds; - struct timeval tv = { timeout, 0 }; - - FD_ZERO(&rfds); - FD_SET(fd, &rfds); - return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL); -} - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @param path NULL, ">output", or ">>output" - * @param timeout seconds to wait before timing out or 0 for no timeout - * @param ppid NULL to wait for child termination or pointer to pid - * @return return value of executed command or errno - */ -int -_eval(char *const argv[], char *path, int timeout, int *ppid) -{ - pid_t pid; - int status; - int fd; - int flags; - int sig; - char buf[254]=""; - int i; - - switch (pid = fork()) { - case -1: /* error */ - perror("fork"); - return errno; - case 0: /* child */ - /* Reset signal handlers set for parent process */ - for (sig = 0; sig < (_NSIG-1); sig++) - signal(sig, SIG_DFL); - - /* Clean up */ - ioctl(0, TIOCNOTTY, 0); - close(STDIN_FILENO); - close(STDOUT_FILENO); - close(STDERR_FILENO); - setsid(); - - /* We want to check the board if exist UART? , add by honor 2003-12-04 */ - if ((fd = open("/dev/console", O_RDWR)) < 0) { - (void) open("/dev/null", O_RDONLY); - (void) open("/dev/null", O_WRONLY); - (void) open("/dev/null", O_WRONLY); - } - else{ - close(fd); - (void) open("/dev/console", O_RDONLY); - (void) open("/dev/console", O_WRONLY); - (void) open("/dev/console", O_WRONLY); - } - - /* Redirect stdout to <path> */ - if (path) { - flags = O_WRONLY | O_CREAT; - if (!strncmp(path, ">>", 2)) { - /* append to <path> */ - flags |= O_APPEND; - path += 2; - } else if (!strncmp(path, ">", 1)) { - /* overwrite <path> */ - flags |= O_TRUNC; - path += 1; - } - if ((fd = open(path, flags, 0644)) < 0) - perror(path); - else { - dup2(fd, STDOUT_FILENO); - close(fd); - } - } - - /* execute command */ - for(i=0 ; argv[i] ; i++) - snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]); - dprintf("cmd=[%s]\n", buf); - setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1); - alarm(timeout); - execvp(argv[0], argv); - perror(argv[0]); - exit(errno); - default: /* parent */ - if (ppid) { - *ppid = pid; - return 0; - } else { - waitpid(pid, &status, 0); - if (WIFEXITED(status)) - return WEXITSTATUS(status); - else - return status; - } - } -} - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @return stdout of executed command or NULL if an error occurred - */ -char * -_backtick(char *const argv[]) -{ - int filedes[2]; - pid_t pid; - int status; - char *buf = NULL; - - /* create pipe */ - if (pipe(filedes) == -1) { - perror(argv[0]); - return NULL; - } - - switch (pid = fork()) { - case -1: /* error */ - return NULL; - case 0: /* child */ - close(filedes[0]); /* close read end of pipe */ - dup2(filedes[1], 1); /* redirect stdout to write end of pipe */ - close(filedes[1]); /* close write end of pipe */ - execvp(argv[0], argv); - exit(errno); - break; - default: /* parent */ - close(filedes[1]); /* close write end of pipe */ - buf = fd2str(filedes[0]); - waitpid(pid, &status, 0); - break; - } - - return buf; -} - -/* - * Kills process whose PID is stored in plaintext in pidfile - * @param pidfile PID file - * @return 0 on success and errno on failure - */ -int -kill_pidfile(char *pidfile) -{ - FILE *fp = fopen(pidfile, "r"); - char buf[256]; - - if (fp && fgets(buf, sizeof(buf), fp)) { - pid_t pid = strtoul(buf, NULL, 0); - fclose(fp); - return kill(pid, SIGTERM); - } else - return errno; -} - -/* - * fread() with automatic retry on syscall interrupt - * @param ptr location to store to - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully read - */ -int -safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream) -{ - size_t ret = 0; - - do { - clearerr(stream); - ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream); - } while (ret < nmemb && ferror(stream) && errno == EINTR); - - return ret; -} - -/* - * fwrite() with automatic retry on syscall interrupt - * @param ptr location to read from - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully written - */ -int -safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream) -{ - size_t ret = 0; - - do { - clearerr(stream); - ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream); - } while (ret < nmemb && ferror(stream) && errno == EINTR); - - return ret; -} - -/* - * Convert Ethernet address string representation to binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @param e binary data - * @return TRUE if conversion was successful and FALSE otherwise - */ -int -ether_atoe(const char *a, unsigned char *e) -{ - char *c = (char *) a; - int i = 0; - - memset(e, 0, ETHER_ADDR_LEN); - for (;;) { - e[i++] = (unsigned char) strtoul(c, &c, 16); - if (!*c++ || i == ETHER_ADDR_LEN) - break; - } - return (i == ETHER_ADDR_LEN); -} - -/* - * Convert Ethernet address binary data to string representation - * @param e binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @return a - */ -char * -ether_etoa(const unsigned char *e, char *a) -{ - char *c = a; - int i; - - for (i = 0; i < ETHER_ADDR_LEN; i++) { - if (i) - *c++ = ':'; - c += sprintf(c, "%02X", e[i] & 0xff); - } - return a; -} diff --git a/openwrt/package/openwrt/libshared/wl.c b/openwrt/package/openwrt/libshared/wl.c deleted file mode 100644 index f09317ad0..000000000 --- a/openwrt/package/openwrt/libshared/wl.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Wireless network adapter utilities - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ -#include <string.h> - -#include <typedefs.h> -#include <wlutils.h> - -int -wl_probe(char *name) -{ - int ret, val; - - /* Check interface */ - if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val)))) - return ret; - if (val != WLC_IOCTL_MAGIC) - return -1; - if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val)))) - return ret; - if (val > WLC_IOCTL_VERSION) - return -1; - - return ret; -} - -int -wl_set_val(char *name, char *var, void *val, int len) -{ - char buf[128]; - int buf_len; - - /* check for overflow */ - if ((buf_len = strlen(var)) + 1 + len > sizeof(buf)) - return -1; - - strcpy(buf, var); - buf_len += 1; - - /* append int value onto the end of the name string */ - memcpy(&buf[buf_len], val, len); - buf_len += len; - - return wl_ioctl(name, WLC_SET_VAR, buf, buf_len); -} - -int -wl_get_val(char *name, char *var, void *val, int len) -{ - char buf[128]; - int ret; - - /* check for overflow */ - if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) - return -1; - - strcpy(buf, var); - if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf)))) - return ret; - - memcpy(val, buf, len); - return 0; -} - -int -wl_set_int(char *name, char *var, int val) -{ - return wl_set_val(name, var, &val, sizeof(val)); -} - -int -wl_get_int(char *name, char *var, int *val) -{ - return wl_get_val(name, var, val, sizeof(*val)); -} - diff --git a/openwrt/package/openwrt/libshared/wl_linux.c b/openwrt/package/openwrt/libshared/wl_linux.c deleted file mode 100644 index 126a40b4b..000000000 --- a/openwrt/package/openwrt/libshared/wl_linux.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Wireless network adapter utilities (linux-specific) - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include <stdio.h> -#include <unistd.h> -#include <string.h> -#include <errno.h> -#include <sys/ioctl.h> -#include <net/if.h> - -#include <typedefs.h> -#include <wlioctl.h> -#include <wlutils.h> - -int -wl_ioctl(char *name, int cmd, void *buf, int len) -{ - struct ifreq ifr; - wl_ioctl_t ioc; - int ret = 0; - int s; - - /* open socket to kernel */ - if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { - perror("socket"); - return errno; - } - - /* do it */ - ioc.cmd = cmd; - ioc.buf = buf; - ioc.len = len; - strncpy(ifr.ifr_name, name, IFNAMSIZ); - ifr.ifr_data = (caddr_t) &ioc; - if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0) - if (cmd != WLC_GET_MAGIC) - perror(ifr.ifr_name); - - /* cleanup */ - close(s); - return ret; -} - -int -wl_hwaddr(char *name, unsigned char *hwaddr) -{ - struct ifreq ifr; - int ret = 0; - int s; - - /* open socket to kernel */ - if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { - perror("socket"); - return errno; - } - - /* do it */ - strncpy(ifr.ifr_name, name, IFNAMSIZ); - if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0) - memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN); - - /* cleanup */ - close(s); - return ret; -} - diff --git a/openwrt/package/openwrt/mtd.c b/openwrt/package/openwrt/mtd.c deleted file mode 100644 index 74949fdac..000000000 --- a/openwrt/package/openwrt/mtd.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * mtd - simple memory technology device manipulation tool - * - * Copyright (C) 2005 Waldemar Brodkorb <wbx@dass-it.de>, - * Felix Fietkau <nbd@vd-s.ath.cx> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * $Id$ - * - * code is based on linux-mtd example code - */ - -#include <limits.h> -#include <unistd.h> -#include <stdlib.h> -#include <stdio.h> -#include <stdint.h> -#include <fcntl.h> -#include <errno.h> -#include <error.h> -#include <time.h> -#include <sys/ioctl.h> -#include <sys/types.h> -#include <sys/param.h> -#include <sys/mount.h> -#include <sys/stat.h> -#include <sys/reboot.h> -#include <string.h> - -#include <linux/mtd/mtd.h> - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define BUFSIZE (10 * 1024) -#define MAX_ARGS 8 - -struct trx_header { - uint32_t magic; /* "HDR0" */ - uint32_t len; /* Length of file including header */ - uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ - uint32_t flag_version; /* 0:15 flags, 16:31 version */ - uint32_t offsets[3]; /* Offsets of partitions from start of header */ -}; - -int -trx_check(const char *trxfile, const char *mtd) -{ - struct mtd_info_user mtdInfo; - int trxfd, fd; - size_t count; - struct trx_header trx; - struct stat trxstat; - - trxfd = open(trxfile,O_RDONLY); - if(trxfd < 0) { - fprintf(stderr, "Could not open trx image: %s\n", trxfile); - exit(1); - } - - if (fstat(trxfd,&trxstat) < 0) { - fprintf(stderr, "Could not get trx image file status: %s\n", trxfile); - close(trxfd); - exit(1); - } - - count = read(trxfd, &trx, sizeof(struct trx_header)); - if (count < sizeof(struct trx_header)) { - fprintf(stderr, "Could not trx header, file too small (%ld bytes)\n", count); - close(trxfd); - exit(1); - } - - if (trx.magic != TRX_MAGIC || trx.len < sizeof(struct trx_header)) { - fprintf(stderr, "Bad trx header\n"); - fprintf(stderr, "If this is a firmware in bin format, like some of the\n" - "original firmware files are, use following command to convert to trx:\n" - "dd if=firmware.bin of=firmware.trx bs=32 skip=1\n"); - close(trxfd); - exit(1); - } - - lseek(trxfd, 0, SEEK_SET); - - /* check if image fits to mtd device */ - - fd = mtd_open(mtd, O_RDWR); - if(fd < 0) { - fprintf(stderr, "Could not open mtd device: %s\n", mtd); - exit(1); - } - - if(ioctl(fd, MEMGETINFO, &mtdInfo)) { - fprintf(stderr, "Could not get MTD device info from %s\n", mtd); - close(fd); - exit(1); - } - - if(mtdInfo.size < trxstat.st_size) { - fprintf(stderr, "Image too big for partition: %s\n", mtd); - close(trxfd); - close(fd); - exit(1); - } - - printf("Writing %s to %s ...\n", trxfile, mtd); - - close(fd); - - return(trxfd); -} - -int -mtd_unlock(const char *mtd) -{ - int fd; - struct mtd_info_user mtdInfo; - struct erase_info_user mtdLockInfo; - - fd = mtd_open(mtd, O_RDWR); - if(fd < 0) { - fprintf(stderr, "Could not open mtd device: %s\n", mtd); - exit(1); - } - - if(ioctl(fd, MEMGETINFO, &mtdInfo)) { - fprintf(stderr, "Could not get MTD device info from %s\n", mtd); - close(fd); - exit(1); - } - - printf("Unlocking %s ...\n", mtd); - mtdLockInfo.start = 0; - mtdLockInfo.length = mtdInfo.size; - if(ioctl(fd, MEMUNLOCK, &mtdLockInfo)) { - close(fd); - return 0; - } - - close(fd); - return 0; -} - -int -mtd_open(const char *mtd, int flags) -{ - FILE *fp; - char dev[PATH_MAX]; - int i; - - if ((fp = fopen("/proc/mtd", "r"))) { - while (fgets(dev, sizeof(dev), fp)) { - if (sscanf(dev, "mtd%d:", &i) && strstr(dev, mtd)) { - snprintf(dev, sizeof(dev), "/dev/mtd/%d", i); - fclose(fp); - return open(dev, flags); - } - } - fclose(fp); - } - - return open(mtd, flags); -} - -int -mtd_erase(const char *mtd) -{ - int fd; - struct mtd_info_user mtdInfo; - struct erase_info_user mtdEraseInfo; - - fd = mtd_open(mtd, O_RDWR); - if(fd < 0) { - fprintf(stderr, "Could not open mtd device: %s\n", mtd); - exit(1); - } - - if(ioctl(fd, MEMGETINFO, &mtdInfo)) { - fprintf(stderr, "Could not get MTD device info from %s\n", mtd); - close(fd); - exit(1); - } - - printf("Erasing %s ...\n", mtd); - mtdEraseInfo.length = mtdInfo.erasesize; - - for (mtdEraseInfo.start = 0; - mtdEraseInfo.start < mtdInfo.size; - mtdEraseInfo.start += mtdInfo.erasesize) { - - ioctl(fd, MEMUNLOCK, &mtdEraseInfo); - if(ioctl(fd, MEMERASE, &mtdEraseInfo)) { - fprintf(stderr, "Could not erase MTD device: %s\n", mtd); - close(fd); - exit(1); - } - } - - close(fd); - return 0; - -} - -int -mtd_write(int trxfd, const char *mtd) -{ - int fd,i; - size_t result,size,written; - struct mtd_info_user mtdInfo; - struct erase_info_user mtdEraseInfo; - unsigned char src[BUFSIZE],dest[BUFSIZE]; - struct stat trxstat; - - if (fstat(trxfd,&trxstat) < 0) { - fprintf(stderr, "Could not get trx image file status\n"); - close(trxfd); - exit(1); - } - - fd = mtd_open(mtd, O_RDWR); - if(fd < 0) { - fprintf(stderr, "Could not open mtd device: %s\n", mtd); - exit(1); - } - - if(ioctl(fd, MEMGETINFO, &mtdInfo)) { - fprintf(stderr, "Could not get MTD device info from %s\n", mtd); - close(fd); - exit(1); - } - - mtdEraseInfo.start = 0; - mtdEraseInfo.length = trxstat.st_size & ~(mtdInfo.erasesize -1); - if(trxstat.st_size % mtdInfo.erasesize) mtdEraseInfo.length += mtdInfo.erasesize; - - /* erase the chunk */ - if (ioctl (fd,MEMERASE,&mtdEraseInfo) < 0) { - fprintf(stderr, "Erasing mtd failed: %s\n", mtd); - exit(1); - } - - size = trxstat.st_size; - i = BUFSIZE; - written = 0; - - while (size) { - if (size < BUFSIZE) i = size; - read(trxfd,src,i); - result = write(fd,src,i); - if (i != result) { - if (result < 0) { - fprintf(stderr,"Error while writing image"); - exit(1); - } - fprintf(stderr,"Error writing image"); - exit(1); - } - written += i; - size -= i; - } - - return 0; -} - -void usage(void) -{ - printf("Usage: mtd [<options> ...] <command> [<arguments> ...] <device>\n\n" - "The device is in the format of mtdX (eg: mtd4) or its label.\n" - "mtd recognizes these commands:\n" - " unlock unlock the device\n" - " erase erase all data on device\n" - " write <imagefile> write imagefile to device\n" - "Following options are available:\n" - " -r reboot after successful command\n" - " -e <device> erase <device> before executing the command\n\n" - "Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards\n" - " mtd -r write linux.trx linux\n\n"); - exit(1); -} - -int main (int argc, char **argv) -{ - int ch, i, boot, unlock, trxfd; - char *erase[MAX_ARGS], *device; - enum { - CMD_ERASE, - CMD_WRITE, - CMD_UNLOCK - } cmd; - - erase[0] = NULL; - boot = 0; - - while ((ch = getopt(argc, argv, "re:")) != -1) - switch (ch) { - case 'r': - boot = 1; - break; - case 'e': - i = 0; - while ((erase[i] != NULL) && ((i + 1) < MAX_ARGS)) - i++; - - erase[i++] = optarg; - erase[i] = NULL; - break; - - case '?': - default: - usage(); - } - argc -= optind; - argv += optind; - - if (argc < 2) - usage(); - - if ((strcmp(argv[0], "unlock") == 0) && (argc == 2)) { - cmd = CMD_UNLOCK; - device = argv[1]; - } else if ((strcmp(argv[0], "erase") == 0) && (argc == 2)) { - cmd = CMD_ERASE; - device = argv[1]; - } else if ((strcmp(argv[0], "write") == 0) && (argc == 3)) { - cmd = CMD_WRITE; - device = argv[2]; - /* check trx file before erasing or writing anything */ - trxfd = trx_check(argv[1], device); - } else { - usage(); - } - - sync(); - - i = 0; - while (erase[i] != NULL) { - mtd_unlock(erase[i]); - mtd_erase(erase[i]); - i++; - } - - mtd_unlock(device); - - switch (cmd) { - case CMD_UNLOCK: - break; - case CMD_ERASE: - mtd_erase(device); - break; - case CMD_WRITE: - mtd_write(trxfd, device); - break; - } - - if (boot) - kill(1, 15); // send SIGTERM to init for reboot - - return 0; -} diff --git a/openwrt/package/openwrt/openwrt-utils.control b/openwrt/package/openwrt/openwrt-utils.control deleted file mode 100644 index 37ef63276..000000000 --- a/openwrt/package/openwrt/openwrt-utils.control +++ /dev/null @@ -1,9 +0,0 @@ -Package: openwrt-utils -Priority: optional -Section: sys -Maintainer: Felix Fietkau <nbd@vd-s.ath.cx> -Source: buildroot internal -Description: Basic OpenWrt utilities - This package contains: - mtd: Tool for modifying the flash chip - jffs2root: Expands the jffs2 root partition |