ramips: Add support of D-link DIR-620D1

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36432 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 114 insertions, 1 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index fe925c0f0..a82e1ce34 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -24,7 +24,7 @@ get_status_led() {
 	d105)
 		status_led="d105:red:power"
 		;;
-	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1)
+	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1)
 		status_led="d-link:green:status"
 		;;
 	dir-645)
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 5915a02ef..5cd931320 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -67,6 +67,7 @@ case "$FIRMWARE" in
 	d105 | \
 	dir-615-h1 | \
 	dir-620-a1 | \
+	dir-620-d1 | \
 	esr-9753 | \
 	fonera20n | \
 	rt-n13u | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index cd17d7fa3..cfe5c621c 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -65,6 +65,9 @@ case $board in
 		ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0"
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
+	dir-620-d1)
+		set_wifi_led "d-link:green:wifi"
+		;;
 	esr-9753)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index e28f2b546..49c4f7f33 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -164,6 +164,7 @@ ramips_setup_macs()
 	bc2 | \
 	br6425 | \
 	broadway | \
+	dir-620-d1 | \
 	f5d8235-v1 | \
 	mzk-w300nh2 | \
 	nw718 | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 52bf115cc..d0309fd6e 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -12,6 +12,7 @@ preinit_set_mac_address() {
 	3g-6200n |\
 	3g-6200nl |\
 	3g300m | \
+	dir-620-d1 |\
 	w150m | \
 	mzk-w300nh2 |\
 	wl-330n |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 37b477a06..24823f6c0 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -81,6 +81,9 @@ ramips_board_detect() {
 	*"DIR-620 A1")
 		name="dir-620-a1"
 		;;
+	*"DIR-620 D1")
+		name="dir-620-d1"
+		;;
 	*"DIR-615 H1")
 		name="dir-615-h1"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index ef150445b..895455971 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -32,6 +32,7 @@ platform_check_image() {
 	dir-615-h1 | \
 	dir-615-d | \
 	dir-620-a1 | \
+	dir-620-d1 | \
 	dap-1350 | \
 	esr-9753 | \
 	fonera20n | \
diff --git a/target/linux/ramips/dts/DIR-620-D1.dts b/target/linux/ramips/dts/DIR-620-D1.dts
new file mode 100644
index 000000000..8913e268f
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-620-D1.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt3352.dtsi"
+
+/ {
+	compatible = "DIR-620-D1", "ralink,rt3352-soc";
+	model = "D-Link DIR-620 D1";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+			ralink,gpiomux = "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l6405d";
+				spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status {
+			label = "d-link:green:status";
+			gpios = <&gpio0 9 1>;
+		};
+		wifi {
+			label = "d-link:green:wifi";
+			gpios = <&gpio0 17 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 7 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 4e8cde731..703e1f09f 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -291,6 +291,7 @@ Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b
 Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
 
 Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1)
+Image/Build/Profile/DIR-620-D1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-d1,DIR-620-D1)
 
 define BuildFirmware/DIR615H1/squashfs
 	$(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1)
@@ -433,6 +434,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR-600-B2,$(1))
 	$(call Image/Build/Profile/DIR-615-D,$(1))
 	$(call Image/Build/Profile/DIR-620-A1,$(1))
+	$(call Image/Build/Profile/DIR-620-D1,$(1))
 	$(call Image/Build/Profile/DIR615H1,$(1))
 	$(call Image/Build/Profile/DAP1350,$(1))
 	$(call Image/Build/Profile/DAP1350WW,$(1))