moko: Fix patch so it applies properly. This fixes kernel boot due to other patches in the stack that weren't applied due to the failure.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13617 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 53 insertions, 38 deletions

diff --git a/target/linux/s3c24xx/patches-2.6.26/0000-reverse-openwrt-patches-921-922-923.patch b/target/linux/s3c24xx/patches-2.6.26/0000-reverse-openwrt-patches-921-922-923.patch
index 46acbd999..c82f52442 100755
--- a/target/linux/s3c24xx/patches-2.6.26/0000-reverse-openwrt-patches-921-922-923.patch
+++ b/target/linux/s3c24xx/patches-2.6.26/0000-reverse-openwrt-patches-921-922-923.patch
@@ -1,6 +1,7 @@
-diff -ruN linux-2.6.26.orig/Documentation/gpiommc.txt linux-2.6.26/Documentation/gpiommc.txt
---- linux-2.6.26.orig/Documentation/gpiommc.txt	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/Documentation/gpiommc.txt	1970-01-01 01:00:00.000000000 +0100
+Index: linux-2.6.26/Documentation/gpiommc.txt
+===================================================================
+--- linux-2.6.26.orig/Documentation/gpiommc.txt	2008-12-12 21:55:07.000000000 +0100
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
 @@ -1,97 +0,0 @@
 -GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
 -================================================================
@@ -99,10 +100,11 @@ diff -ruN linux-2.6.26.orig/Documentation/gpiommc.txt linux-2.6.26/Documentation
 -(/config/gpiommc/my_mmc in this example).
 -There's no need to first unregister the device before removing it. That will
 -be done automatically.
-diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/host/gpiommc.c
---- linux-2.6.26.orig/drivers/mmc/host/gpiommc.c	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/mmc/host/gpiommc.c	1970-01-01 01:00:00.000000000 +0100
-@@ -1,619 +0,0 @@
+Index: linux-2.6.26/drivers/mmc/host/gpiommc.c
+===================================================================
+--- linux-2.6.26.orig/drivers/mmc/host/gpiommc.c	2008-12-12 21:55:07.000000000 +0100
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
+@@ -1,624 +0,0 @@
 -/*
 - * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
 - * This module hooks up the mmc_spi and spi_gpio modules and also
@@ -113,11 +115,13 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/
 - * Licensed under the GNU/GPL. See COPYING for details.
 - */
 -
--#include <linux/mmc/gpiommc.h>
 -#include <linux/platform_device.h>
 -#include <linux/list.h>
 -#include <linux/mutex.h>
+-#include <linux/mmc/gpiommc.h>
+-#include <linux/mmc/host.h>
 -#include <linux/spi/spi_gpio.h>
+-#include <linux/spi/mmc_spi.h>
 -#include <linux/configfs.h>
 -#include <linux/gpio.h>
 -#include <asm/atomic.h>
@@ -130,6 +134,7 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/
 -	struct platform_device *pdev;
 -	struct platform_device *spi_pdev;
 -	struct spi_board_info boardinfo;
+-	struct mmc_spi_platform_data mmc_spi_data;
 -};
 -
 -
@@ -151,6 +156,7 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/
 -	bi->max_speed_hz = pdata->max_bus_speed;
 -	bi->bus_num = master->bus_num;
 -	bi->mode = pdata->mode;
+-	bi->platform_data = &d->mmc_spi_data;
 -
 -	return 0;
 -}
@@ -180,6 +186,7 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/
 -	if (!d)
 -		goto error;
 -	d->pdev = pdev;
+-	d->mmc_spi_data.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34;
 -
 -	/* Create the SPI-GPIO device */
 -	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
@@ -722,10 +729,11 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/gpiommc.c linux-2.6.26/drivers/mmc/
 -	platform_driver_unregister(&gpiommc_plat_driver);
 -}
 -module_exit(gpiommc_modexit);
-diff -ruN linux-2.6.26.orig/drivers/mmc/host/Kconfig linux-2.6.26/drivers/mmc/host/Kconfig
---- linux-2.6.26.orig/drivers/mmc/host/Kconfig	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/mmc/host/Kconfig	2008-10-24 21:03:47.000000000 +0200
-@@ -130,27 +130,3 @@
+Index: linux-2.6.26/drivers/mmc/host/Kconfig
+===================================================================
+--- linux-2.6.26.orig/drivers/mmc/host/Kconfig	2008-12-12 21:55:07.000000000 +0100
++++ linux-2.6.26/drivers/mmc/host/Kconfig	2008-12-12 21:55:25.000000000 +0100
+@@ -130,27 +130,3 @@ config MMC_SPI
  
  	  If unsure, or if your system has no SPI master driver, say N.
  
@@ -753,19 +761,21 @@ diff -ruN linux-2.6.26.orig/drivers/mmc/host/Kconfig linux-2.6.26/drivers/mmc/ho
 -	help
 -	  This option automatically enables configfs support for gpiommc
 -	  if configfs is available.
-diff -ruN linux-2.6.26.orig/drivers/mmc/host/Makefile linux-2.6.26/drivers/mmc/host/Makefile
---- linux-2.6.26.orig/drivers/mmc/host/Makefile	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/mmc/host/Makefile	2008-10-24 21:03:47.000000000 +0200
-@@ -17,4 +17,4 @@
+Index: linux-2.6.26/drivers/mmc/host/Makefile
+===================================================================
+--- linux-2.6.26.orig/drivers/mmc/host/Makefile	2008-12-12 21:55:07.000000000 +0100
++++ linux-2.6.26/drivers/mmc/host/Makefile	2008-12-12 21:55:25.000000000 +0100
+@@ -17,4 +17,4 @@ obj-$(CONFIG_MMC_OMAP)		+= omap.o
  obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
  obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
  obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 -obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
 +
-diff -ruN linux-2.6.26.orig/drivers/spi/Kconfig linux-2.6.26/drivers/spi/Kconfig
---- linux-2.6.26.orig/drivers/spi/Kconfig	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/spi/Kconfig	2008-10-24 21:03:47.000000000 +0200
-@@ -100,19 +100,6 @@
+Index: linux-2.6.26/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.26.orig/drivers/spi/Kconfig	2008-12-12 21:55:07.000000000 +0100
++++ linux-2.6.26/drivers/spi/Kconfig	2008-12-12 21:55:25.000000000 +0100
+@@ -100,19 +100,6 @@ config SPI_BUTTERFLY
  	  inexpensive battery powered microcontroller evaluation board.
  	  This same cable can be used to flash new firmware.
  
@@ -785,10 +795,11 @@ diff -ruN linux-2.6.26.orig/drivers/spi/Kconfig linux-2.6.26/drivers/spi/Kconfig
  config SPI_IMX
  	tristate "Freescale iMX SPI controller"
  	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -ruN linux-2.6.26.orig/drivers/spi/Makefile linux-2.6.26/drivers/spi/Makefile
---- linux-2.6.26.orig/drivers/spi/Makefile	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/spi/Makefile	2008-10-24 21:03:47.000000000 +0200
-@@ -16,7 +16,6 @@
+Index: linux-2.6.26/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.26.orig/drivers/spi/Makefile	2008-12-12 21:55:07.000000000 +0100
++++ linux-2.6.26/drivers/spi/Makefile	2008-12-12 21:55:25.000000000 +0100
+@@ -16,7 +16,6 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
  obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
  obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
  obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
@@ -796,9 +807,10 @@ diff -ruN linux-2.6.26.orig/drivers/spi/Makefile linux-2.6.26/drivers/spi/Makefi
  obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
  obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
  obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
-diff -ruN linux-2.6.26.orig/drivers/spi/spi_gpio.c linux-2.6.26/drivers/spi/spi_gpio.c
---- linux-2.6.26.orig/drivers/spi/spi_gpio.c	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/drivers/spi/spi_gpio.c	1970-01-01 01:00:00.000000000 +0100
+Index: linux-2.6.26/drivers/spi/spi_gpio.c
+===================================================================
+--- linux-2.6.26.orig/drivers/spi/spi_gpio.c	2008-12-12 21:55:07.000000000 +0100
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
 @@ -1,251 +0,0 @@
 -/*
 - * Bitbanging SPI bus driver using GPIO API
@@ -1051,9 +1063,10 @@ diff -ruN linux-2.6.26.orig/drivers/spi/spi_gpio.c linux-2.6.26/drivers/spi/spi_
 -MODULE_AUTHOR("Michael Buesch");
 -MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
 -MODULE_LICENSE("GPL v2");
-diff -ruN linux-2.6.26.orig/include/linux/mmc/gpiommc.h linux-2.6.26/include/linux/mmc/gpiommc.h
---- linux-2.6.26.orig/include/linux/mmc/gpiommc.h	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/include/linux/mmc/gpiommc.h	1970-01-01 01:00:00.000000000 +0100
+Index: linux-2.6.26/include/linux/mmc/gpiommc.h
+===================================================================
+--- linux-2.6.26.orig/include/linux/mmc/gpiommc.h	2008-12-12 21:55:07.000000000 +0100
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
 @@ -1,71 +0,0 @@
 -/*
 - * Device driver for MMC/SD cards driven over a GPIO bus.
@@ -1126,9 +1139,10 @@ diff -ruN linux-2.6.26.orig/include/linux/mmc/gpiommc.h linux-2.6.26/include/lin
 -int gpiommc_next_id(void);
 -
 -#endif /* LINUX_GPIOMMC_H_ */
-diff -ruN linux-2.6.26.orig/include/linux/spi/spi_gpio.h linux-2.6.26/include/linux/spi/spi_gpio.h
---- linux-2.6.26.orig/include/linux/spi/spi_gpio.h	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/include/linux/spi/spi_gpio.h	1970-01-01 01:00:00.000000000 +0100
+Index: linux-2.6.26/include/linux/spi/spi_gpio.h
+===================================================================
+--- linux-2.6.26.orig/include/linux/spi/spi_gpio.h	2008-12-12 21:55:07.000000000 +0100
++++ /dev/null	1970-01-01 00:00:00.000000000 +0000
 @@ -1,73 +0,0 @@
 -/*
 - * spi_gpio interface to platform code
@@ -1203,10 +1217,11 @@ diff -ruN linux-2.6.26.orig/include/linux/spi/spi_gpio.h linux-2.6.26/include/li
 -int spi_gpio_next_id(void);
 -
 -#endif /* _LINUX_SPI_SPI_GPIO */
-diff -ruN linux-2.6.26.orig/MAINTAINERS linux-2.6.26/MAINTAINERS
---- linux-2.6.26.orig/MAINTAINERS	2008-10-24 21:04:46.000000000 +0200
-+++ linux-2.6.26/MAINTAINERS	2008-10-24 21:04:02.000000000 +0200
-@@ -1818,11 +1818,6 @@
+Index: linux-2.6.26/MAINTAINERS
+===================================================================
+--- linux-2.6.26.orig/MAINTAINERS	2008-12-12 21:55:07.000000000 +0100
++++ linux-2.6.26/MAINTAINERS	2008-12-12 21:55:25.000000000 +0100
+@@ -1818,11 +1818,6 @@ L:	gigaset307x-common@lists.sourceforge.
  W:	http://gigaset307x.sourceforge.net/
  S:	Maintained
  
@@ -1218,7 +1233,7 @@ diff -ruN linux-2.6.26.orig/MAINTAINERS linux-2.6.26/MAINTAINERS
  HARDWARE MONITORING
  P:	Mark M. Hoffman
  M:	mhoffman@lightlink.com
-@@ -3800,11 +3795,6 @@
+@@ -3800,11 +3795,6 @@ L:	cbe-oss-dev@ozlabs.org
  W:	http://www.ibm.com/developerworks/power/cell/
  S:	Supported