au1000: remove support for 3.3. kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36067 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 0 insertions, 174 deletions

diff --git a/target/linux/au1000/config-3.3 b/target/linux/au1000/config-3.3
deleted file mode 100644
index ecc978490..000000000
--- a/target/linux/au1000/config-3.3
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_ALCHEMY_GPIOINT_AU1000=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock0 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRAMFS=m
-CONFIG_CRC16=y
-CONFIG_CSRC_R4K_LIB=y
-# CONFIG_DEBUG_ZBOOT is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DUMMY=m
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_I2C=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_AU1550 is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_KERNEL_GZIP=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1300 is not set
-# CONFIG_MIPS_GPR is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MMC_AU1X is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_STANDALONE is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/au1000/patches-3.3/002-openwrt_rootfs.patch b/target/linux/au1000/patches-3.3/002-openwrt_rootfs.patch
deleted file mode 100644
index 3adf3b44e..000000000
--- a/target/linux/au1000/patches-3.3/002-openwrt_rootfs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/alchemy/board-mtx1.c
-+++ b/arch/mips/alchemy/board-mtx1.c
-@@ -171,7 +171,7 @@ static struct platform_device mtx1_gpio_
- 
- static struct mtd_partition mtx1_mtd_partitions[] = {
- 	{
--		.name	= "filesystem",
-+		.name	= "rootfs",
- 		.size	= 0x01C00000,
- 		.offset	= 0,
- 	},
diff --git a/target/linux/au1000/patches-3.3/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-3.3/003-au1000_eth_ioctl.patch
deleted file mode 100644
index b97a439a4..000000000
--- a/target/linux/au1000/patches-3.3/003-au1000_eth_ioctl.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/drivers/net/ethernet/amd/au1000_eth.c
-+++ b/drivers/net/ethernet/amd/au1000_eth.c
-@@ -991,10 +991,14 @@ static void au1000_multicast_list(struct
- 	writel(reg, &aup->mac->control);
- }
- 
-+#define AU1000_KNOWN_PHY_IOCTLS        (SIOCGMIIPHY & 0xfff0)
- static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct au1000_private *aup = netdev_priv(dev);
- 
-+	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
-+		return -EINVAL;
-+
- 	if (!netif_running(dev))
- 		return -EINVAL;
- 
diff --git a/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch b/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch
deleted file mode 100644
index 6b3603220..000000000
--- a/target/linux/au1000/patches-3.3/004-pci-idsel-cb.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/alchemy/board-mtx1.c	2012-06-11 22:02:34.686604093 +0100
-+++ b/arch/mips/alchemy/board-mtx1.c	2012-06-11 22:04:23.375143044 +0100
-@@ -228,6 +228,9 @@
- 	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
- 	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
- 	 */
-+
-+	udelay(1);
-+
- 	if (assert && devsel != 0)
- 		/* Suppress signal to Cardbus */
- 		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */