summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-01-23 10:23:32 +0000
committerjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>2012-01-23 10:23:32 +0000
commit20d9fd2c16d05b80250900c053f424050098a5c8 (patch)
tree1e10ed76dfdfe7279414b77490d10832f366b999
parent71feb1ed023d103a41f3aac0cf4ca1f7ddd99229 (diff)
ramips: scripts updates
In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh10
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/leds9
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network41
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh2
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c4
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c4
6 files changed, 47 insertions, 23 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index b38f1a5ac..bbadc3206 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -30,14 +30,17 @@ status_led_off() {
get_status_led() {
case $(ramips_board_name) in
+ argus-atp52b)
+ status_led="argus-atp52b:green:run"
+ ;;
dir-300-b1 | dir-600-b1 | dir-600-b2)
status_led="d-link:green:status"
;;
esr-9753)
status_led="esr-9753:orange:power"
;;
- f5d8235-v1)
- status_led="f5d8234-v1:blue:storage"
+ f5d8235-v2)
+ status_led="f5d8235v2:blue:router"
;;
fonera20n)
status_led="fonera20n:green:power"
@@ -69,6 +72,9 @@ get_status_led() {
w502u)
status_led="alfa:blue:wps"
;;
+ wcr-150gn)
+ status_led="wcr150gn:amber:power"
+ ;;
whr-g300n)
status_led="whr-g300n:green:router"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index 0877a1d25..02d522a6d 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -39,6 +39,12 @@ case $board in
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ f5d8235-v1)
+ set_usb_led "f5d8235-v1:blue:storage"
+ ;;
+ f5d8235-v2)
+ set_usb_led "f5d8235v2:blue:storage"
+ ;;
fonera20n)
set_usb_led "fonera20n:amber:usb"
;;
@@ -55,4 +61,7 @@ case $board in
set_usb_led "alfa:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
;;
+ wcr-150gn)
+ set_usb_led "wcr150gn:amber:user"
+ ;;
esac
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 7e58ef043..89a3e359a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -18,12 +18,20 @@ ramips_setup_interfaces()
case $board in
argus-atp52b | \
b2c | \
- f5d8235-v2 | \
nw718 | \
w502u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
+ f5d8235-v1 | \
+ rt-n15)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "rtl8366s" "1" "1"
+ ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
+ ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+ ;;
+
+ f5d8235-v2 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366rb" "1" "1"
@@ -31,16 +39,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
;;
- wli-tx4-ag300n)
- ucidef_set_interface_lan "eth0"
+ wcr-150gn)
+ ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
;;
- f5d8235-v1 | \
- rt-n15)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "rtl8366s" "1" "1"
- ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
- ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+ wli-tx4-ag300n)
+ ucidef_set_interface_lan "eth0"
;;
*)
@@ -61,11 +65,6 @@ ramips_setup_macs()
local wan_mac=""
case $board in
- f5d8235-v2)
- lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
- wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
- ;;
-
argus-atp52b | \
b2c | \
f5d8235-v1 | \
@@ -89,19 +88,29 @@ ramips_setup_macs()
wan_mac=$(ramips_get_mac_binary factory 40)
;;
+ f5d8235-v2)
+ lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+ wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+ ;;
+
w502u)
lan_mac=$(ramips_get_mac_binary factory 40)
wan_mac=$(ramips_get_mac_binary factory 46)
;;
+ wcr-150gn)
+ lan_mac=$(ramips_get_mac_binary factory 4)
+ wan_mac=$(ramips_get_mac_binary factory 40)
+ ;;
+
wli-tx4-ag300n)
lan_mac=$(ramips_get_mac_binary factory 4)
;;
esac
- [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
- [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 0a336eaec..dca2d1d91 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -98,7 +98,7 @@ ramips_board_name() {
*"RT-N15")
name="rt-n15"
;;
- *"WCR-150GN")
+ *"Sparklan WCR-150GN")
name="wcr-150gn"
;;
*"V22RW-2X2")
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
index 7db7e6f33..db45cc87f 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c
@@ -86,11 +86,11 @@ static struct platform_device f5d8235_rtl8366s_device = {
static struct gpio_led f5d8235_leds_gpio[] __initdata = {
{
- .name = "f5d8234-v1:blue:storage",
+ .name = "f5d8235-v1:blue:storage",
.gpio = F5D8235_GPIO_LED_USB_BLUE,
.active_low = 1,
},{
- .name = "f5d8234-v1:orange:storage",
+ .name = "f5d8235-v1:orange:storage",
.gpio = F5D8235_GPIO_LED_USB_ORANGE,
.active_low = 1,
}
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c
index cc4879941..be6569075 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c
@@ -31,12 +31,12 @@
static struct gpio_led argus_atp52b_leds_gpio[] __initdata = {
{
- .name = "argus_atp52b:green:run",
+ .name = "argus-atp52b:green:run",
.gpio = ARGUS_ATP52B_GPIO_LED_RUN,
.active_low = 1,
},
{
- .name = "argus_atp52b:amber:net",
+ .name = "argus-atp52b:amber:net",
.gpio = ARGUS_ATP52B_GPIO_LED_NET,
.active_low = 1,
}