summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-04-22 15:30:07 +0000
committerflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>2006-04-22 15:30:07 +0000
commit4bc2787c6709cd0b47c73d3b9ba1903e12747a68 (patch)
treec1899ebc8e7838d38096151d7bda6314691256b4
parentee873a47d6d9898fa27c5c1120e7c5ecb592f62f (diff)
Add watchdog driver, prevents device from rebooting. Kernel now fully usable
Add patches for various image formats Add map for MTX-1 board (same as pb1500) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@3702 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat
-rw-r--r--openwrt/target/linux/au1000-2.6/Makefile5
-rw-r--r--openwrt/target/linux/au1000-2.6/config823
-rw-r--r--openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch16
-rw-r--r--openwrt/target/linux/au1000-2.6/patches/003-zImage.patch2272
-rw-r--r--openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch285
5 files changed, 2850 insertions, 551 deletions
diff --git a/openwrt/target/linux/au1000-2.6/Makefile b/openwrt/target/linux/au1000-2.6/Makefile
index c361f0e5e..35ab1034c 100644
--- a/openwrt/target/linux/au1000-2.6/Makefile
+++ b/openwrt/target/linux/au1000-2.6/Makefile
@@ -17,9 +17,10 @@ $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
@$(CP) config $(LINUX_DIR)/.config
touch $@
-$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
- $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
+$(LINUX_BUILD_DIR)/zImage: $(LINUX_DIR)/vmlinux
+ $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) zImage.flash $(MAKE_TRACE)
$(CP) $(LINUX_DIR)/vmlinux $@
+ echo "toto"
touch $@
compile: $(LINUX_DIR)/vmlinux
diff --git a/openwrt/target/linux/au1000-2.6/config b/openwrt/target/linux/au1000-2.6/config
index 37dac8ed2..bb7e267ad 100644
--- a/openwrt/target/linux/au1000-2.6/config
+++ b/openwrt/target/linux/au1000-2.6/config
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.2
-# Tue Apr 11 13:27:02 2006
+# Linux kernel version: 2.6.16.7
+# Sat Apr 22 16:46:55 2006
#
CONFIG_MIPS=y
@@ -113,7 +113,7 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_MIPS_MT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
@@ -148,19 +148,21 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -169,10 +171,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_SLAB is not set
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-CONFIG_SLOB=y
+# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
@@ -180,11 +182,11 @@ CONFIG_OBSOLETE_INTERMODULE=y
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
#
# Block layer
@@ -196,8 +198,8 @@ CONFIG_OBSOLETE_MODPARM=y
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
@@ -226,7 +228,7 @@ CONFIG_MMU=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
+CONFIG_BINFMT_MISC=y
CONFIG_TRAD_SIGNALS=y
# CONFIG_PM is not set
@@ -239,12 +241,12 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
+CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
+CONFIG_UNIX=m
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
@@ -255,33 +257,35 @@ CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_IPSEC_NAT_TRAVERSAL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
+# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
#
@@ -289,136 +293,44 @@ CONFIG_TCP_CONG_SCALABLE=m
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_SIP=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_TIME=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_POLICY is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_IMQ=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
+# CONFIG_IP_NF_SET is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_POLICY is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_IMQ=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
#
# Bridge: Netfilter Configuration
@@ -458,17 +370,12 @@ CONFIG_BRIDGE_EBT_ULOG=m
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
@@ -491,16 +398,15 @@ CONFIG_NET_SCH_CLK_JIFFIES=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_ESFQ=m
+# CONFIG_NET_SCH_ESFQ is not set
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
@@ -513,67 +419,35 @@ CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_HAMRADIO=y
-
-#
-# Packet Radio protocols
-#
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_YAM is not set
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -582,21 +456,21 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Generic Driver Options
#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
#
-CONFIG_CONNECTOR=m
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
@@ -628,7 +502,7 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
@@ -641,11 +515,10 @@ CONFIG_MTD_CFI_UTIL=y
#
# Mapping drivers for chip access
#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ALCHEMY is not set
CONFIG_MTD_MTX1=y
-# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -697,8 +570,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -712,7 +586,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
@@ -721,14 +595,14 @@ CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
@@ -798,15 +672,11 @@ CONFIG_BLK_DEV_SD=m
# Network device support
#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+# CONFIG_IFB is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
-CONFIG_IMQ=m
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-CONFIG_IMQ_BEHAVIOR_BA=y
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_IMQ is not set
CONFIG_TUN=m
#
@@ -837,26 +707,7 @@ CONFIG_MIPS_AU1X00_ENET=y
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
@@ -872,7 +723,6 @@ CONFIG_NET_PCI=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -896,20 +746,15 @@ CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
-# CONFIG_STRIP is not set
+CONFIG_STRIP=m
#
# Wireless 802.11b ISA/PCI cards support
#
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
@@ -918,49 +763,27 @@ CONFIG_PCI_ATMEL=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
+CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -978,7 +801,7 @@ CONFIG_PPPOATM=m
#
# Input device support
#
-CONFIG_INPUT=m
+CONFIG_INPUT=y
#
# Userland interfaces
@@ -986,7 +809,7 @@ CONFIG_INPUT=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
@@ -1007,7 +830,9 @@ CONFIG_INPUT_EVDEV=m
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -1015,10 +840,10 @@ CONFIG_INPUT_EVDEV=m
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_AU1X00 is not set
+CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
@@ -1038,9 +863,29 @@ CONFIG_UNIX98_PTYS=y
#
# Watchdog Cards
#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_MTX1_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_RTC=m
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1090,29 +935,7 @@ CONFIG_UNIX98_PTYS=y
#
# Multimedia devices
#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
@@ -1125,93 +948,15 @@ CONFIG_VIDEO_DEV=m
# CONFIG_FB is not set
#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
# Sound
#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-# CONFIG_SND_AU1X00 is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
#
# USB support
@@ -1232,20 +977,15 @@ CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
@@ -1258,15 +998,14 @@ CONFIG_USB_PRINTER=m
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1297,34 +1036,36 @@ CONFIG_USB_STORAGE=m
#
# USB Imaging devices
#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
#
# USB Network Adapters
#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -1334,62 +1075,58 @@ CONFIG_USB_STORAGE=m
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_LD=m
+CONFIG_USB_TEST=m
#
# USB DSL modem support
#
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-CONFIG_USB_UEAGLEATM=m
-# CONFIG_USB_XUSBATM is not set
#
# USB Gadget Support
@@ -1413,34 +1150,26 @@ CONFIG_USB_UEAGLEATM=m
#
# File systems
#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1455,26 +1184,28 @@ CONFIG_INOTIFY=y
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVFS_DEBUG=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
@@ -1490,15 +1221,12 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=m
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
@@ -1512,24 +1240,32 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
#
# Network File Systems
#
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1539,28 +1275,13 @@ CONFIG_CIFS=m
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
@@ -1610,11 +1331,11 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE=""
#
# Security options
@@ -1627,29 +1348,29 @@ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
@@ -1659,8 +1380,12 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
# Library routines
#
CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_CRC16=y
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
new file mode 100644
index 000000000..9a6b05b14
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/002-mtx1_flash_map.patch
@@ -0,0 +1,16 @@
+diff -urN linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c
+--- linux-2.6.16.7/drivers/mtd/maps/alchemy-flash.c 2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/mtd/maps/alchemy-flash.c 2006-04-20 19:16:26.000000000 +0200
+@@ -105,6 +105,12 @@
+ #define USE_LOCAL_ACCESSORS /* why? */
+ #endif
+
++#ifdef CONFIG_MIPS_MTX1
++#define BOARD_MAP_NAME "MTX-1 Flash"
++#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
++#define BOARD_FLASH_WIDTH 4 /* 32-bits */
++#endif
++
+ static struct map_info alchemy_map = {
+ .name = BOARD_MAP_NAME,
+ };
diff --git a/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
new file mode 100644
index 000000000..6c2230f8c
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/003-zImage.patch
@@ -0,0 +1,2272 @@
+diff -urN linux-2.6.16.7/arch/mips/Makefile linux-2.6.16.7.new/arch/mips/Makefile
+--- linux-2.6.16.7/arch/mips/Makefile 2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/Makefile 2006-04-20 19:27:22.000000000 +0200
+@@ -840,6 +840,12 @@
+ vmlinux.srec: $(vmlinux-32)
+ +@$(call makeboot,$@)
+
++zImage: vmlinux
++ +@$(call makeboot,$@)
++
++zImage.flash: vmlinux
++ +@$(call makeboot,$@)
++
+ CLEAN_FILES += vmlinux.ecoff \
+ vmlinux.srec \
+ vmlinux.rm200.tmp \
+@@ -848,6 +854,7 @@
+ archclean:
+ @$(MAKE) $(clean)=arch/mips/boot
+ @$(MAKE) $(clean)=arch/mips/lasat
++ @$(MAKE) $(clean)=arch/mips/boot/compressed
+
+ CLEAN_FILES += vmlinux.32 \
+ vmlinux.64 \
+diff -urN linux-2.6.16.7/arch/mips/Makefile.orig linux-2.6.16.7.new/arch/mips/Makefile.orig
+--- linux-2.6.16.7/arch/mips/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/Makefile.orig 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,858 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
++# DECStation modifications by Paul M. Antoine, 1996
++# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
++#
++# This file is included by the global makefile so that you can add your own
++# architecture-specific flags and dependencies. Remember to do have actions
++# for "archclean" cleaning up for this architecture.
++#
++
++as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
++ -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
++ else echo "$(2)"; fi ;)
++
++cflags-y :=
++
++#
++# Select the object file format to substitute into the linker script.
++#
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++32bit-tool-prefix = mipsel-linux-
++64bit-tool-prefix = mips64el-linux-
++32bit-bfd = elf32-tradlittlemips
++64bit-bfd = elf64-tradlittlemips
++32bit-emul = elf32ltsmip
++64bit-emul = elf64ltsmip
++else
++32bit-tool-prefix = mips-linux-
++64bit-tool-prefix = mips64-linux-
++32bit-bfd = elf32-tradbigmips
++64bit-bfd = elf64-tradbigmips
++32bit-emul = elf32btsmip
++64bit-emul = elf64btsmip
++endif
++
++ifdef CONFIG_32BIT
++gcc-abi = 32
++tool-prefix = $(32bit-tool-prefix)
++UTS_MACHINE := mips
++endif
++ifdef CONFIG_64BIT
++gcc-abi = 64
++tool-prefix = $(64bit-tool-prefix)
++UTS_MACHINE := mips64
++endif
++
++ifdef CONFIG_CROSSCOMPILE
++CROSS_COMPILE := $(tool-prefix)
++endif
++
++CHECKFLAGS-y += -D__linux__ -D__mips__ \
++ -D_MIPS_SZINT=32 \
++ -D_ABIO32=1 \
++ -D_ABIN32=2 \
++ -D_ABI64=3
++CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
++ -D_MIPS_SZLONG=32 \
++ -D_MIPS_SZPTR=32 \
++ -D__PTRDIFF_TYPE__=int
++CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
++ -D_MIPS_SZLONG=64 \
++ -D_MIPS_SZPTR=64 \
++ -D__PTRDIFF_TYPE__="long int"
++CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
++CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
++
++CHECKFLAGS = $(CHECKFLAGS-y)
++
++ifdef CONFIG_BUILD_ELF64
++gas-abi = 64
++ld-emul = $(64bit-emul)
++vmlinux-32 = vmlinux.32
++vmlinux-64 = vmlinux
++else
++gas-abi = 32
++ld-emul = $(32bit-emul)
++vmlinux-32 = vmlinux
++vmlinux-64 = vmlinux.64
++
++cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs)
++endif
++
++#
++# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
++# code since it only slows down the whole thing. At some point we might make
++# use of global pointer optimizations but their use of $28 conflicts with
++# the current pointer optimization.
++#
++# The DECStation requires an ECOFF kernel for remote booting, other MIPS
++# machines may also. Since BFD is incredibly buggy with respect to
++# crossformat linking we rely on the elf2ecoff tool for format conversion.
++#
++cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
++cflags-y += -msoft-float
++LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
++MODFLAGS += -mlong-calls
++
++#
++# We explicitly add the endianness specifier if needed, this allows
++# to compile kernels with a toolchain for the other endianness. We
++# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
++# when fed the toolchain default!
++#
++cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
++cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
++
++cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
++ -fno-omit-frame-pointer
++
++#
++# Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
++#
++# <cpu0>,<isa0> -- preferred CPU and ISA designations (may require
++# recent tools)
++# <cpu1>,<isa1> -- fallback CPU and ISA designations (have to work
++# with up to the oldest supported tools)
++# <isa2> -- an ISA designation used as an ABI selector for
++# gcc versions that do not support "-mabi=32"
++# (depending on the CPU type, either "mips1" or
++# "mips2")
++#
++set_gccflags = $(shell \
++while :; do \
++ cpu=$(1); isa=-$(2); \
++ for gcc_opt in -march= -mcpu=; do \
++ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
++ -xc /dev/null > /dev/null 2>&1 && \
++ break 2; \
++ done; \
++ cpu=$(3); isa=-$(4); \
++ for gcc_opt in -march= -mcpu=; do \
++ $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
++ -xc /dev/null > /dev/null 2>&1 && \
++ break 2; \
++ done; \
++ break; \
++done; \
++gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \
++if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \
++ gcc_isa=$$isa; \
++else \
++ gcc_abi=; gcc_isa=-$(5); \
++fi; \
++gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
++while :; do \
++ for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
++ $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
++ -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
++ break 2; \
++ done; \
++ gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
++ break; \
++done; \
++if test "$(gcc-abi)" != "$(gas-abi)"; then \
++ gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
++fi; \
++if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
++ $(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
++ -xc /dev/null > /dev/null 2>&1 && \
++ gcc_isa=; \
++fi; \
++echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
++
++#
++# CPU-dependent compiler/assembler options for optimization.
++#
++cflags-$(CONFIG_CPU_R3000) += \
++ $(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
++CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
++
++cflags-$(CONFIG_CPU_TX39XX) += \
++ $(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
++CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
++
++cflags-$(CONFIG_CPU_R6000) += \
++ $(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2
++
++cflags-$(CONFIG_CPU_R4300) += \
++ $(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_VR41XX) += \
++ $(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_R4X00) += \
++ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_TX49XX) += \
++ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
++
++cflags-$(CONFIG_CPU_MIPS32_R1) += \
++ $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
++
++cflags-$(CONFIG_CPU_MIPS32_R2) += \
++ $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
++
++cflags-$(CONFIG_CPU_MIPS64_R1) += \
++ $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_MIPS64_R2) += \
++ $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_R5000) += \
++ $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_R5432) += \
++ $(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_NEVADA) += \
++ $(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_RM7000) += \
++ $(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_RM9000) += \
++ $(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++
++cflags-$(CONFIG_CPU_SB1) += \
++ $(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
++
++cflags-$(CONFIG_CPU_R8000) += \
++ $(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++cflags-$(CONFIG_CPU_R10000) += \
++ $(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
++ -Wa,--trap
++CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
++
++ifdef CONFIG_CPU_SB1
++ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
++MODFLAGS += -msb1-pass1-workarounds
++endif
++endif
++
++#
++# Firmware support
++#
++libs-$(CONFIG_ARC) += arch/mips/arc/
++libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
++
++#
++# Board-dependent options and extra files
++#
++
++#
++# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
++#
++core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
++cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz
++load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
++
++#
++# Common Alchemy Au1x00 stuff
++#
++core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
++cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00
++
++#
++# AMD Alchemy Pb1000 eval board
++#
++libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/
++cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1100 eval board
++#
++libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/
++cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1500 eval board
++#
++libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
++cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1550 eval board
++#
++libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
++cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
++
++#
++# AMD Alchemy Pb1200 eval board
++#
++libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
++cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
++load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
++
++#
++# AMD Alchemy Db1000 eval board
++#
++libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
++
++#
++# AMD Alchemy Db1100 eval board
++#
++libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000
++
++#
++# AMD Alchemy Db1500 eval board
++#
++libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000
++
++#
++# AMD Alchemy Db1550 eval board
++#
++libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
++
++#
++# AMD Alchemy Db1200 eval board
++#
++libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
++cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
++
++#
++# AMD Alchemy Bosporus eval board
++#
++libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000
++
++#
++# AMD Alchemy Mirage eval board
++#
++libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/
++cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00
++load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000
++
++#
++# 4G-Systems eval board
++#
++libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/
++load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
++
++#
++# MyCable eval board
++#
++libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/
++load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
++
++#
++# Cobalt Server
++#
++core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
++cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
++load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
++
++#
++# DECstation family
++#
++core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
++cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
++libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
++load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
++CLEAN_FILES += drivers/tc/lk201-map.c
++
++#
++# Galileo EV64120 Board
++#
++core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/
++core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/
++cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120
++load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
++
++#
++# Galileo EV96100 Board
++#
++core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/
++cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
++load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
++
++#
++# Globespan IVR eval board with QED 5231 CPU
++#
++core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
++core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/
++load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000
++
++#
++# ITE 8172 eval board with QED 5231 CPU
++#
++core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/
++load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000
++
++#
++# For all MIPS, Inc. eval boards
++#
++core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
++
++#
++# MIPS Atlas board
++#
++core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/
++cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas
++cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips
++load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000
++
++#
++# MIPS Malta board
++#
++core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/
++cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips
++load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
++
++#
++# MIPS SEAD board
++#
++core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
++load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
++
++#
++# MIPS SIM
++#
++core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/
++cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim
++load-$(CONFIG_MIPS_SIM) += 0x80100000
++
++#
++# Momentum Ocelot board
++#
++# The Ocelot setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++#
++core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
++ arch/mips/gt64120/momenco_ocelot/
++cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
++load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
++
++#
++# Momentum Ocelot-G board
++#
++# The Ocelot-G setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++#
++core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/
++load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000
++
++#
++# Momentum Ocelot-C and -CS boards
++#
++# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
++# mips_io_port_base.
++core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/
++load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000
++
++#
++# PMC-Sierra Yosemite
++#
++core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
++cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
++load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
++
++# Qemu simulating MIPS32 4Kc
++#
++core-$(CONFIG_QEMU) += arch/mips/qemu/
++cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu
++load-$(CONFIG_QEMU) += 0xffffffff80010000
++
++#
++# Momentum Ocelot-3
++#
++core-$(CONFIG_MOMENCO_OCELOT_3) += arch/mips/momentum/ocelot_3/
++cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3
++load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000
++
++#
++# Momentum Jaguar ATX
++#
++core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
++cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
++#ifdef CONFIG_JAGUAR_DMALOW
++#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000
++#else
++load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
++#endif
++
++#
++# NEC DDB
++#
++core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
++
++#
++# NEC DDB Vrc-5074
++#
++core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/
++load-$(CONFIG_DDB5074) += 0xffffffff80080000
++
++#
++# NEC DDB Vrc-5476
++#
++core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/
++load-$(CONFIG_DDB5476) += 0xffffffff80080000
++
++#
++# NEC DDB Vrc-5477
++#
++core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/
++load-$(CONFIG_DDB5477) += 0xffffffff80100000
++
++core-$(CONFIG_LASAT) += arch/mips/lasat/
++cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
++load-$(CONFIG_LASAT) += 0xffffffff80000000
++
++#
++# Common VR41xx
++#
++core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/
++cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx
++
++#
++# NEC VR4133
++#
++core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/
++load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000
++
++#
++# ZAO Networks Capcella (VR4131)
++#
++load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000
++
++#
++# Victor MP-C303/304 (VR4122)
++#
++load-$(CONFIG_VICTOR_MPC30X) += 0xffffffff80001000
++
++#
++# IBM WorkPad z50 (VR4121)
++#
++core-$(CONFIG_IBM_WORKPAD) += arch/mips/vr41xx/ibm-workpad/
++load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000
++
++#
++# CASIO CASSIPEIA E-55/65 (VR4111)
++#
++core-$(CONFIG_CASIO_E55) += arch/mips/vr41xx/casio-e55/
++load-$(CONFIG_CASIO_E55) += 0xffffffff80004000
++
++#
++# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131)
++#
++load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
++
++#
++# Common Philips PNX8550
++#
++core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/
++cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550
++
++#
++# Philips PNX8550 JBS board
++#
++libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
++#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
++load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
++
++#
++# SGI IP22 (Indy/Indigo2)
++#
++# Set the load address to >= 0xffffffff88069000 if you want to leave space for
++# symmon, 0xffffffff80002000 for production kernels. Note that the value must
++# be aligned to a multiple of the kernel stack size or the handling of the
++# current variable will break so for 64-bit kernels we have to raise the start
++# address by 8kb.
++#
++core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/
++cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22
++ifdef CONFIG_32BIT
++load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
++endif
++ifdef CONFIG_64BIT
++load-$(CONFIG_SGI_IP22) += 0xffffffff88004000
++endif
++
++#
++# SGI-IP27 (Origin200/2000)
++#
++# Set the load address to >= 0xc000000000300000 if you want to leave space for
++# symmon, 0xc00000000001c000 for production kernels. Note that the value must
++# be 16kb aligned or the handling of the current variable will break.
++#
++ifdef CONFIG_SGI_IP27
++core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
++cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
++ifdef CONFIG_BUILD_ELF64
++ifdef CONFIG_MAPPED_KERNEL
++load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
++OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
++dataoffset-$(CONFIG_SGI_IP27) += 0x01000000
++else
++load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
++OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
++endif
++else
++ifdef CONFIG_MAPPED_KERNEL
++load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000
++OBJCOPYFLAGS := --change-addresses=0xc000000080000000
++dataoffset-$(CONFIG_SGI_IP27) += 0x01000000
++else
++load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000
++OBJCOPYFLAGS := --change-addresses=0xa800000080000000
++endif
++endif
++endif
++
++#
++# SGI-IP32 (O2)
++#
++# Set the load address to >= 80069000 if you want to leave space for symmon,
++# 0xffffffff80004000 for production kernels. Note that the value must be aligned to
++# a multiple of the kernel stack size or the handling of the current variable
++# will break.
++#
++core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/
++cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32
++load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
++
++#
++# Sibyte SB1250 SOC
++#
++# This is a LIB so that it links at the end, and initcalls are later
++# the sequence; but it is built as an object so that modules don't get
++# removed (as happens, even if they have __initcall/module_init)
++#
++core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
++cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
++
++core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
++cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
++
++core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
++cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
++
++core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
++cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
++ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
++
++#
++# Sibyte BCM91120x (Carmel) board
++# Sibyte BCM91120C (CRhine) board
++# Sibyte BCM91125C (CRhone) board
++# Sibyte BCM91125E (Rhone) board
++# Sibyte SWARM board
++# Sibyte BCM91x80 (BigSur) board
++#
++libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
++libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
++load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
++
++#
++# SNI RM200 PCI
++#
++core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
++cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200
++load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000
++
++#
++# Toshiba JMR-TX3927 board
++#
++core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \
++ arch/mips/jmr3927/common/
++cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
++load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000
++
++#
++# Toshiba RBTX4927 board or
++# Toshiba RBTX4937 board
++#
++core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/
++core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/
++load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
++
++#
++# Toshiba RBTX4938 board
++#
++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
++core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
++load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
++
++cflags-y += -Iinclude/asm-mips/mach-generic
++drivers-$(CONFIG_PCI) += arch/mips/pci/
++
++ifdef CONFIG_32BIT
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++JIFFIES = jiffies_64
++else
++JIFFIES = jiffies_64 + 4
++endif
++else
++JIFFIES = jiffies_64
++endif
++
++AFLAGS += $(cflags-y)
++CFLAGS += $(cflags-y)
++
++LDFLAGS += -m $(ld-emul)
++
++OBJCOPYFLAGS += --remove-section=.reginfo
++
++#
++# Choosing incompatible machines durings configuration will result in
++# error messages during linking. Select a default linkscript if
++# none has been choosen above.
++#
++
++CPPFLAGS_vmlinux.lds := \
++ $(CFLAGS) \
++ -D"LOADADDR=$(load-y)" \
++ -D"JIFFIES=$(JIFFIES)" \
++ -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
++
++head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
++
++libs-y += arch/mips/lib/
++libs-$(CONFIG_32BIT) += arch/mips/lib-32/
++libs-$(CONFIG_64BIT) += arch/mips/lib-64/
++
++core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
++
++drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
++
++ifdef CONFIG_LASAT
++rom.bin rom.sw: vmlinux
++ $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
++endif
++
++#
++# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
++# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
++# convert to ECOFF using elf2ecoff.
++#
++vmlinux.32: vmlinux
++ $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
++
++#
++# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
++# ELF files from 32-bit files by conversion.
++#
++vmlinux.64: vmlinux
++ $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
++
++makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
++
++ifdef CONFIG_BOOT_ELF32
++all: $(vmlinux-32)
++endif
++
++ifdef CONFIG_BOOT_ELF64
++all: $(vmlinux-64)
++endif
++
++ifdef CONFIG_MIPS_ATLAS
++all: vmlinux.srec
++endif
++
++ifdef CONFIG_MIPS_MALTA
++all: vmlinux.srec
++endif
++
++ifdef CONFIG_MIPS_SEAD
++all: vmlinux.srec
++endif
++
++ifdef CONFIG_QEMU
++all: vmlinux.bin
++endif
++
++ifdef CONFIG_SNI_RM200_PCI
++all: vmlinux.ecoff
++endif
++
++vmlinux.bin: $(vmlinux-32)
++ +@$(call makeboot,$@)
++
++vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
++ +@$(call makeboot,$@)
++
++vmlinux.srec: $(vmlinux-32)
++ +@$(call makeboot,$@)
++
++zImage: vmlinux
++ +@$(call makeboot,$@)
++
++CLEAN_FILES += vmlinux.ecoff \
++ vmlinux.srec \
++ vmlinux.rm200.tmp \
++ vmlinux.rm200
++
++archclean:
++ @$(MAKE) $(clean)=arch/mips/boot
++ @$(MAKE) $(clean)=arch/mips/lasat
++ @$(MAKE) $(clean)=arch/mips/boot/compressed
++
++CLEAN_FILES += vmlinux.32 \
++ vmlinux.64 \
++ vmlinux.ecoff
+diff -urN linux-2.6.16.7/arch/mips/boot/Makefile linux-2.6.16.7.new/arch/mips/boot/Makefile
+--- linux-2.6.16.7/arch/mips/boot/Makefile 2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/boot/Makefile 2006-04-20 19:27:22.000000000 +0200
+@@ -16,6 +16,7 @@
+ E2EFLAGS =
+ endif
+
++
+ #
+ # Drop some uninteresting sections in the kernel.
+ # This is only relevant for ELF kernels but doesn't hurt a.out
+@@ -25,7 +26,10 @@
+
+ VMLINUX = vmlinux
+
+-all: vmlinux.ecoff vmlinux.srec addinitrd
++ZBOOT_TARGETS = zImage zImage.flash
++bootdir-y := compressed
++
++all: vmlinux.ecoff vmlinux.srec addinitrd zImage
+
+ vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
+ $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+@@ -51,3 +55,11 @@
+ vmlinux.bin \
+ vmlinux.ecoff \
+ vmlinux.srec
++
++.PHONY: $(ZBOOT_TARGETS) $(bootdir-y)
++
++$(ZBOOT_TARGETS): $(bootdir-y)
++
++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
++ $(addprefix $(obj)/,$(hostprogs-y))
++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+diff -urN linux-2.6.16.7/arch/mips/boot/Makefile.orig linux-2.6.16.7.new/arch/mips/boot/Makefile.orig
+--- linux-2.6.16.7/arch/mips/boot/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/Makefile.orig 2006-04-17 23:53:25.000000000 +0200
+@@ -0,0 +1,53 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1995, 1998, 2001, 2002 by Ralf Baechle
++# Copyright (C) 2004 Maciej W. Rozycki
++#
++
++#
++# Some DECstations need all possible sections of an ECOFF executable
++#
++ifdef CONFIG_MACH_DECSTATION
++ E2EFLAGS = -a
++else
++ E2EFLAGS =
++endif
++
++#
++# Drop some uninteresting sections in the kernel.
++# This is only relevant for ELF kernels but doesn't hurt a.out
++#
++drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options
++strip-flags = $(addprefix --remove-section=,$(drop-sections))
++
++VMLINUX = vmlinux
++
++all: vmlinux.ecoff vmlinux.srec addinitrd
++
++vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
++ $(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
++
++$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
++ $(HOSTCC) -o $@ $^
++
++vmlinux.bin: $(VMLINUX)
++ $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
++
++vmlinux.srec: $(VMLINUX)
++ $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
++
++$(obj)/addinitrd: $(obj)/addinitrd.c
++ $(HOSTCC) -o $@ $^
++
++archhelp:
++ @echo '* vmlinux.ecoff - ECOFF boot image'
++ @echo '* vmlinux.srec - SREC boot image'
++
++clean-files += addinitrd \
++ elf2ecoff \
++ vmlinux.bin \
++ vmlinux.ecoff \
++ vmlinux.srec
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/Makefile 2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,32 @@
++
++#
++# arch/mips/boot/compressed/Makefile
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 1994 by Linus Torvalds
++# Adapted for PowerPC by Gary Thomas
++# modified by Cort (cort@cs.nmt.edu)
++#
++# Ported to MIPS by Pete Popov, ppopov@embeddedalley.com
++#
++
++boot := arch/mips/boot
++compressed := arch/mips/boot/compressed
++
++CFLAGS += -fno-builtin -D__BOOTER__ -I$(compressed)/include
++
++BOOT_TARGETS = zImage zImage.flash
++
++bootdir-$(CONFIG_SOC_AU1X00) := au1xxx
++subdir-y := common lib images
++
++.PHONY: $(BOOT_TARGETS) $(bootdir-y)
++
++$(BOOT_TARGETS): $(bootdir-y)
++
++$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
++ $(addprefix $(obj)/,$(hostprogs-y))
++ $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/Makefile 2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,110 @@
++# arch/mips/boot/compressed/au1xxx/Makefile
++#
++# Makefile for AMD Alchemy Semiconductor Au1x based boards.
++# All of the boot loader code was derived from the ppc
++# boot code.
++#
++# Copyright 2001,2002 MontaVista Software Inc.
++#
++# Author: Mark A. Greer
++# mgreer@mvista.com
++#
++# Copyright 2004 Embedded Alley Solutions, Inc
++# Ported and modified for mips 2.6 support by
++# Pete Popov <ppopov@embeddedalley.com>
++#
++# This program is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by the
++# Free Software Foundation; either version 2 of the License, or (at your
++# option) any later version.
++
++boot := arch/mips/boot
++compressed := $(boot)/compressed
++utils := $(compressed)/utils
++lib := $(compressed)/lib
++images := $(compressed)/images
++common := $(compressed)/common
++
++#########################################################################
++# START BOARD SPECIFIC VARIABLES
++
++# These two variables control where the zImage is stored
++# in flash and loaded in memory. It only controls how the srec
++# file is generated, the code is the same.
++RAM_RUN_ADDR = 0x81000000
++
++ifdef CONFIG_MIPS_XXS1500
++FLASH_LOAD_ADDR = 0xBF000000
++else
++FLASH_LOAD_ADDR = 0xBFD00000
++endif
++
++# These two variables specify the free ram region
++# that can be used for temporary malloc area
++AVAIL_RAM_START=0x80500000
++AVAIL_RAM_END=0x80900000
++
++# This one must match the LOADADDR in arch/mips/Makefile!
++LOADADDR=0x80100000
++
++# WARNING WARNING WARNING
++# Note that with a LOADADDR of 0x80100000 and AVAIL_RAM_START of
++# 0x80500000, the max decompressed kernel size can be 4MB. Else we
++# start overwriting ourselve. You can change these vars as needed;
++# it would be much better if we just figured everything out on the fly.
++
++# END BOARD SPECIFIC VARIABLES
++#########################################################################
++
++OBJECTS := $(obj)/head.o $(common)/misc-common.o $(common)/misc-simple.o \
++ $(common)/au1k_uart.o
++LIBS := $(lib)/lib.a
++
++ENTRY := $(utils)/entry
++OFFSET := $(utils)/offset
++SIZE := $(utils)/size
++
++LD_ARGS := -T $(compressed)/ld.script -Ttext $(RAM_RUN_ADDR) -Bstatic
++
++ifdef CONFIG_CPU_LITTLE_ENDIAN
++OBJCOPY_ARGS = -O elf32-tradlittlemips
++else
++OBJCOPY_ARGS = -O elf32-tradbigmips
++endif
++
++$(obj)/head.o: $(obj)/head.S $(TOPDIR)/vmlinux
++ $(CC) -I $(TOPDIR)/include $(AFLAGS) \
++ -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) $(TOPDIR)/vmlinux ) \
++ -c -o $*.o $<
++
++$(common)/misc-simple.o:
++ $(CC) -I $(TOPDIR)/include $(CFLAGS) -DINITRD_OFFSET=0 -DINITRD_SIZE=0 -DZIMAGE_OFFSET=0 \
++ -DAVAIL_RAM_START=$(AVAIL_RAM_START) \
++ -DAVAIL_RAM_END=$(AVAIL_RAM_END) \
++ -DLOADADDR=$(LOADADDR) \
++ -DZIMAGE_SIZE=0 -c -o $@ $*.c
++
++$(obj)/zvmlinux: $(OBJECTS) $(LIBS) $(srctree)/$(compressed)/ld.script $(images)/vmlinux.gz $(common)/dummy.o
++ $(OBJCOPY) \
++ --add-section=.image=$(images)/vmlinux.gz \
++ --set-section-flags=.image=contents,alloc,load,readonly,data \
++ $(common)/dummy.o $(common)/image.o
++ $(LD) $(LD_ARGS) -o $@ $(OBJECTS) $(common)/image.o $(LIBS)
++ $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R __kcrctab -R __ksymtab_strings \
++ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
++
++# Here we manipulate the image in order to get it the necessary
++# srecord file we need.
++zImage: $(obj)/zvmlinux
++ mv $(obj)/zvmlinux $(images)/zImage
++ $(OBJCOPY) -O srec $(images)/zImage $(images)/zImage.srec
++ $(OBJCOPY) -O binary $(images)/zImage $(images)/zImage.bin
++
++zImage.flash: zImage
++ ( \
++ flash=${FLASH_LOAD_ADDR} ; \
++ ram=${RAM_RUN_ADDR} ; \
++ adjust=$$[ $$flash - $$ram ] ; \
++ $(OBJCOPY) -O srec --adjust-vma `printf '0x%08x' $$adjust` \
++ $(images)/zImage $(images)/zImage.flash.srec ; \
++ )
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S
+--- linux-2.6.16.7/arch/mips/boot/compressed/au1xxx/head.S 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/au1xxx/head.S 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,119 @@
++/*
++ * arch/mips/kernel/head.S
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 1994, 1995 Waldorf Electronics
++ * Written by Ralf Baechle and Andreas Busse
++ * Copyright (C) 1995 - 1999 Ralf Baechle
++ * Copyright (C) 1996 Paul M. Antoine
++ * Modified for DECStation and hence R3000 support by Paul M. Antoine
++ * Further modifications by David S. Miller and Harald Koerfgen
++ * Copyright (C) 1999 Silicon Graphics, Inc.
++ *
++ * Head.S contains the MIPS exception handler and startup code.
++ *
++ **************************************************************************
++ * 9 Nov, 2000.
++ * Added Cache Error exception handler and SBDDP EJTAG debug exception.
++ *
++ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ **************************************************************************
++ */
++#include <linux/config.h>
++#include <linux/threads.h>
++
++#include <asm/asm.h>
++#include <asm/cacheops.h>
++#include <asm/mipsregs.h>
++#include <asm/cachectl.h>
++#include <asm/regdef.h>
++
++#define IndexInvalidate_I 0x00
++#define IndexWriteBack_D 0x01
++
++ .set noreorder
++ .cprestore
++ LEAF(start)
++start:
++ bal locate
++ nop
++locate:
++ subu s8, ra, 8 /* Where we were loaded */
++ la sp, (.stack + 8192)
++
++ move s0, a0 /* Save boot rom start args */
++ move s1, a1
++ move s2, a2
++ move s3, a3
++
++ la a0, start /* Where we were linked to run */
++
++ move a1, s8
++ la a2, _edata
++ subu t1, a2, a0
++ srl t1, t1, 2
++
++ /* copy text section */
++ li t0, 0
++1: lw v0, 0(a1)
++ nop
++ sw v0, 0(a0)
++ xor t0, t0, v0
++ addu a0, 4
++ bne a2, a0, 1b
++ addu a1, 4
++
++ /* Clear BSS */
++ la a0, _edata
++ la a2, _end
++2: sw zero, 0(a0)
++ bne a2, a0, 2b
++ addu a0, 4
++
++ /* push the D-Cache and invalidate I-Cache */
++ li k0, 0x80000000 # start address
++ li k1, 0x80004000 # end address (16KB I-Cache)
++ subu k1, 128
++
++1:
++ .set mips3
++ cache IndexWriteBack_D, 0(k0)
++ cache IndexWriteBack_D, 32(k0)
++ cache IndexWriteBack_D, 64(k0)
++ cache IndexWriteBack_D, 96(k0)
++ cache IndexInvalidate_I, 0(k0)
++ cache IndexInvalidate_I, 32(k0)
++ cache IndexInvalidate_I, 64(k0)
++ cache IndexInvalidate_I, 96(k0)
++ .set mips0
++
++ bne k0, k1, 1b
++ addu k0, k0, 128
++ /* done */
++
++ move a0, s8 /* load address */
++ move a1, t1 /* length in words */
++ move a2, t0 /* checksum */
++ move a3, sp
++
++ la ra, 1f
++ la k0, decompress_kernel
++ jr k0
++ nop
++1:
++
++ move a0, s0
++ move a1, s1
++ move a2, s2
++ move a3, s3
++ li k0, KERNEL_ENTRY
++ jr k0
++ nop
++3:
++ b 3b
++ END(start)
++ .comm .stack,4096*2,4
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/Makefile 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,14 @@
++#
++# arch/mips/boot/compressed/common/Makefile
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License. See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Tom Rini January 2001
++#
++# Pete Popov, 2004
++#
++
++lib-y := misc-common.o no_initrd.o dummy.o
++lib-$(CONFIG_SOC_AU1X00) += au1k_uart.o
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/au1k_uart.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/au1k_uart.c 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,103 @@
++/*
++ * BRIEF MODULE DESCRIPTION
++ * Simple Au1000 uart routines.
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ * Author: MontaVista Software, Inc.
++ * ppopov@mvista.com or source@mvista.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/config.h>
++#include <asm/io.h>
++#include <asm/mach-au1x00/au1000.h>
++#include "ns16550.h"
++
++typedef unsigned char uint8;
++typedef unsigned int uint32;
++
++#define UART16550_BAUD_2400 2400
++#define UART16550_BAUD_4800 4800
++#define UART16550_BAUD_9600 9600
++#define UART16550_BAUD_19200 19200
++#define UART16550_BAUD_38400 38400
++#define UART16550_BAUD_57600 57600
++#define UART16550_BAUD_115200 115200
++
++#define UART16550_PARITY_NONE 0
++#define UART16550_PARITY_ODD 0x08
++#define UART16550_PARITY_EVEN 0x18
++#define UART16550_PARITY_MARK 0x28
++#define UART16550_PARITY_SPACE 0x38
++
++#define UART16550_DATA_5BIT 0x0
++#define UART16550_DATA_6BIT 0x1
++#define UART16550_DATA_7BIT 0x2
++#define UART16550_DATA_8BIT 0x3
++
++#define UART16550_STOP_1BIT 0x0
++#define UART16550_STOP_2BIT 0x4
++
++/* It would be nice if we had a better way to do this.
++ * It could be a variable defined in one of the board specific files.
++ */
++#undef UART_BASE
++#ifdef CONFIG_COGENT_CSB250
++#define UART_BASE UART3_ADDR
++#else
++#define UART_BASE UART0_ADDR
++#endif
++
++/* memory-mapped read/write of the port */
++#define UART16550_READ(y) (au_readl(UART_BASE + y) & 0xff)
++#define UART16550_WRITE(y,z) (au_writel(z&0xff, UART_BASE + y))
++
++/*
++ * We use uart 0, which is already initialized by
++ * yamon.
++ */
++volatile struct NS16550 *
++serial_init(int chan)
++{
++ volatile struct NS16550 *com_port;
++ com_port = (struct NS16550 *) UART_BASE;
++ return (com_port);
++}
++
++void
++serial_putc(volatile struct NS16550 *com_port, unsigned char c)
++{
++ while ((UART16550_READ(UART_LSR)&0x40) == 0);
++ UART16550_WRITE(UART_TX, c);
++}
++
++unsigned char
++serial_getc(volatile struct NS16550 *com_port)
++{
++ while((UART16550_READ(UART_LSR) & 0x1) == 0);
++ return UART16550_READ(UART_RX);
++}
++
++int
++serial_tstc(volatile struct NS16550 *com_port)
++{
++ return((UART16550_READ(UART_LSR) & LSR_DR) != 0);
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/dummy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/dummy.c 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,4 @@
++int main(void)
++{
++ return 0;
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-common.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-common.c 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,434 @@
++/*
++ * arch/mips/boot/compressed/common/misc-common.c
++ *
++ * Misc. bootloader code (almost) all platforms can use
++ *
++ * Author: Johnnie Peters <jpeters@mvista.com>
++ * Editor: Tom Rini <trini@mvista.com>
++ *
++ * Derived from arch/ppc/boot/prep/misc.c
++ *
++ * Ported by Pete Popov <ppopov@mvista.com> to
++ * support mips board(s). I also got rid of the vga console
++ * code.
++ *
++ * Copyright 2000-2001 MontaVista Software Inc.
++ *
++ * Ported to MIPS 2.6 by Pete Popov, <ppopov@embeddedalley.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <stdarg.h> /* for va_ bits */
++#include <linux/config.h>
++#include <linux/string.h>
++#include <linux/zlib.h>
++
++extern char *avail_ram;
++extern char *end_avail;
++extern char _end[];
++
++void puts(const char *);
++void putc(const char c);
++void puthex(unsigned long val);
++void _bcopy(char *src, char *dst, int len);
++void gunzip(void *, int, unsigned char *, int *);
++static int _cvt(unsigned long val, char *buf, long radix, char *digits);
++
++void _vprintk(void(*)(const char), const char *, va_list ap);
++
++struct NS16550 *com_port;
++
++int serial_tstc(volatile struct NS16550 *);
++unsigned char serial_getc(volatile struct NS16550 *);
++void serial_putc(volatile struct NS16550 *, unsigned char);
++
++void pause(void)
++{
++ puts("pause\n");
++}
++
++void exit(void)
++{
++ puts("exit\n");
++ while(1);
++}
++
++int tstc(void)
++{
++ return (serial_tstc(com_port));
++}
++
++int getc(void)
++{
++ while (1) {
++ if (serial_tstc(com_port))
++ return (serial_getc(com_port));
++ }
++}
++
++void
++putc(const char c)
++{
++ serial_putc(com_port, c);
++ if ( c == '\n' )
++ serial_putc(com_port, '\r');
++}
++
++void puts(const char *s)
++{
++ char c;
++ while ( ( c = *s++ ) != '\0' ) {
++ serial_putc(com_port, c);
++ if ( c == '\n' ) serial_putc(com_port, '\r');
++ }
++}
++
++void error(char *x)
++{
++ puts("\n\n");
++ puts(x);
++ puts("\n\n -- System halted");
++
++ while(1); /* Halt */
++}
++
++static void *zalloc(unsigned size)
++{
++ void *p = avail_ram;
++
++ size = (size + 7) & -8;
++ avail_ram += size;
++ if (avail_ram > end_avail) {
++ puts("oops... out of memory\n");
++ pause();
++ }
++ return p;
++}
++
++
++#define HEAD_CRC 2
++#define EXTRA_FIELD 4
++#define ORIG_NAME 8
++#define COMMENT 0x10
++#define RESERVED 0xe0
++
++#define DEFLATED 8
++
++void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
++{
++ z_stream s;
++ int r, i, flags;
++
++ /* skip header */
++ i = 10;
++ flags = src[3];
++ if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
++ puts("bad gzipped data\n");
++ exit();
++ }
++ if ((flags & EXTRA_FIELD) != 0)
++ i = 12 + src[10] + (src[11] << 8);
++ if ((flags & ORIG_NAME) != 0)
++ while (src[i++] != 0)
++ ;
++ if ((flags & COMMENT) != 0)
++ while (src[i++] != 0)
++ ;
++ if ((flags & HEAD_CRC) != 0)
++ i += 2;
++ if (i >= *lenp) {
++ puts("gunzip: ran out of data in header\n");
++ exit();
++ }
++
++ /* Initialize ourself. */
++ s.workspace = zalloc(zlib_inflate_workspacesize());
++ r = zlib_inflateInit2(&s, -MAX_WBITS);
++ if (r != Z_OK) {
++ puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
++ exit();
++ }
++ s.next_in = src + i;
++ s.avail_in = *lenp - i;
++ s.next_out = dst;
++ s.avail_out = dstlen;
++ r = zlib_inflate(&s, Z_FINISH);
++ if (r != Z_OK && r != Z_STREAM_END) {
++ puts("inflate returned "); puthex(r); puts("\n");
++ exit();
++ }
++ *lenp = s.next_out - (unsigned char *) dst;
++ zlib_inflateEnd(&s);
++}
++
++void
++puthex(unsigned long val)
++{
++
++ unsigned char buf[10];
++ int i;
++ for (i = 7; i >= 0; i--)
++ {
++ buf[i] = "0123456789ABCDEF"[val & 0x0F];
++ val >>= 4;
++ }
++ buf[8] = '\0';
++ puts(buf);
++}
++
++#define FALSE 0
++#define TRUE 1
++
++void
++_printk(char const *fmt, ...)
++{
++ va_list ap;
++
++ va_start(ap, fmt);
++ _vprintk(putc, fmt, ap);
++ va_end(ap);
++ return;
++}
++
++#define is_digit(c) ((c >= '0') && (c <= '9'))
++
++void
++_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
++{
++ char c, sign, *cp = 0;
++ int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
++ char buf[32];
++ long val;
++ while ((c = *fmt0++))
++ {
++ if (c == '%')
++ {
++ c = *fmt0++;
++ left_prec = right_prec = pad_on_right = 0;
++ if (c == '-')
++ {
++ c = *fmt0++;
++ pad_on_right++;
++ }
++ if (c == '0')
++ {
++ zero_fill = TRUE;
++ c = *fmt0++;
++ } else
++ {
++ zero_fill = FALSE;
++ }
++ while (is_digit(c))
++ {
++ left_prec = (left_prec * 10) + (c - '0');
++ c = *fmt0++;
++ }
++ if (c == '.')
++ {
++ c = *fmt0++;
++ zero_fill++;
++ while (is_digit(c))
++ {
++ right_prec = (right_prec * 10) + (c - '0');
++ c = *fmt0++;
++ }
++ } else
++ {
++ right_prec = left_prec;
++ }
++ sign = '\0';
++ switch (c)
++ {
++ case 'd':
++ case 'x':
++ case 'X':
++ val = va_arg(ap, long);
++ switch (c)
++ {
++ case 'd':
++ if (val < 0)
++ {
++ sign = '-';
++ val = -val;
++ }
++ length = _cvt(val, buf, 10, "0123456789");
++ break;
++ case 'x':
++ length = _cvt(val, buf, 16, "0123456789abcdef");
++ break;
++ case 'X':
++ length = _cvt(val, buf, 16, "0123456789ABCDEF");
++ break;
++ }
++ cp = buf;
++ break;
++ case 's':
++ cp = va_arg(ap, char *);
++ length = strlen(cp);
++ break;
++ case 'c':
++ c = va_arg(ap, long /*char*/);
++ (*putc)(c);
++ continue;
++ default:
++ (*putc)('?');
++ }
++ pad = left_prec - length;
++ if (sign != '\0')
++ {
++ pad--;
++ }
++ if (zero_fill)
++ {
++ c = '0';
++ if (sign != '\0')
++ {
++ (*putc)(sign);
++ sign = '\0';
++ }
++ } else
++ {
++ c = ' ';
++ }
++ if (!pad_on_right)
++ {
++ while (pad-- > 0)
++ {
++ (*putc)(c);
++ }
++ }
++ if (sign != '\0')
++ {
++ (*putc)(sign);
++ }
++ while (length-- > 0)
++ {
++ (*putc)(c = *cp++);
++ if (c == '\n')
++ {
++ (*putc)('\r');
++ }
++ }
++ if (pad_on_right)
++ {
++ while (pad-- > 0)
++ {
++ (*putc)(c);
++ }
++ }
++ } else
++ {
++ (*putc)(c);
++ if (c == '\n')
++ {
++ (*putc)('\r');
++ }
++ }
++ }
++}
++
++int
++_cvt(unsigned long val, char *buf, long radix, char *digits)
++{
++ char temp[80];
++ char *cp = temp;
++ int length = 0;
++ if (val == 0)
++ { /* Special case */
++ *cp++ = '0';
++ } else
++ while (val)
++ {
++ *cp++ = digits[val % radix];
++ val /= radix;
++ }
++ while (cp != temp)
++ {
++ *buf++ = *--cp;
++ length++;
++ }
++ *buf = '\0';
++ return (length);
++}
++
++void
++_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
++{
++ int i, c;
++ if ((unsigned int)s > (unsigned int)p)
++ {
++ s = (unsigned int)s - (unsigned int)p;
++ }
++ while (s > 0)
++ {
++ if (base)
++ {
++ _printk("%06X: ", (int)p - (int)base);
++ } else
++ {
++ _printk("%06X: ", p);
++ }
++ for (i = 0; i < 16; i++)
++ {
++ if (i < s)
++ {
++ _printk("%02X", p[i] & 0xFF);
++ } else
++ {
++ _printk(" ");
++ }
++ if ((i % 2) == 1) _printk(" ");
++ if ((i % 8) == 7) _printk(" ");
++ }
++ _printk(" |");
++ for (i = 0; i < 16; i++)
++ {
++ if (i < s)
++ {
++ c = p[i] & 0xFF;
++ if ((c < 0x20) || (c >= 0x7F)) c = '.';
++ } else
++ {
++ c = ' ';
++ }
++ _printk("%c", c);
++ }
++ _printk("|\n");
++ s -= 16;
++ p += 16;
++ }
++}
++
++void
++_dump_buf(unsigned char *p, int s)
++{
++ _printk("\n");
++ _dump_buf_with_offset(p, s, 0);
++}
++
++/*
++ * Local variables:
++ * c-indent-level: 8
++ * c-basic-offset: 8
++ * tab-width: 8
++ * End:
++ */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/misc-simple.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/misc-simple.c 2006-04-20 19:27:22.000000000 +0200
+@@ -0,0 +1,122 @@
++/*
++ * arch/mips/zboot/common/misc-simple.c
++ *
++ * Misc. bootloader code for many machines. This assumes you have are using
++ * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory
++ * below 8MB is free. Finally, it assumes you have a NS16550-style uart for
++ * your serial console. If a machine meets these requirements, it can quite
++ * likely use this code during boot.
++ *
++ * Author: Matt Porter <mporter@mvista.com>
++ * Derived from arch/ppc/boot/prep/misc.c
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/types.h>
++#include <linux/elf.h>
++#include <linux/config.h>
++
++#include <asm/page.h>
++
++#include "linux/zlib.h"
++
++extern struct NS16550 *com_port;
++
++char *avail_ram;
++char *end_avail;
++extern char _end[];
++char *zimage_start;
++
++#ifdef CONFIG_CMDLINE
++#define CMDLINE CONFIG_CMDLINE
++#else
++#define CMDLINE ""
++#endif
++char cmd_preset[] = CMDLINE;
++char cmd_buf[256];
++char *cmd_line = cmd_buf;
++
++/* The linker tells us where the image is.
++*/
++extern unsigned char __image_begin, __image_end;
++extern unsigned char __ramdisk_begin, __ramdisk_end;
++unsigned long initrd_size;
++
++extern void puts(const char *);
++extern void putc(const char c);
++extern void puthex(unsigned long val);
++extern void *memcpy(void * __dest, __const void * __src,
++ __kernel_size_t __n);
++extern void gunzip(void *, int, unsigned char *, int *);
++extern void udelay(long delay);
++extern int tstc(void);
++extern int getc(void);
++extern volatile struct NS16550 *serial_init(int chan);
++
++void
++decompress_kernel(unsigned long load_addr, int num_words,
++ unsigned long cksum, unsigned long *sp)
++{
++ extern unsigned long start;
++ int zimage_size;
++
++ com_port = (struct NS16550 *)serial_init(0);
++
++ initrd_size = (unsigned long)(&__ramdisk_end) -
++ (unsigned long)(&__ramdisk_begin);
++
++ /*
++ * Reveal where we were loaded at and where we
++ * were relocated to.
++ */
++ puts("loaded at: "); puthex(load_addr);
++ puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
++ if ( (unsigned long)load_addr != (unsigned long)&start )
++ {
++ puts("relocated to: "); puthex((unsigned long)&start);
++ puts(" ");
++ puthex((unsigned long)((unsigned long)&start + (4*num_words)));
++ puts("\n");
++ }
++
++ /*
++ * We link ourself to an arbitrary low address. When we run, we
++ * relocate outself to that address. __image_being points to
++ * the part of the image where the zImage is. -- Tom
++ */
++ zimage_start = (char *)(unsigned long)(&__image_begin);
++ zimage_size = (unsigned long)(&__image_end) -
++ (unsigned long)(&__image_begin);
++
++ /*
++ * The zImage and initrd will be between start and _end, so they've
++ * already been moved once. We're good to go now. -- Tom
++ */
++ puts("zimage at: "); puthex((unsigned long)zimage_start);
++ puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
++ puts("\n");
++
++ if ( initrd_size ) {
++ puts("initrd at: ");
++ puthex((unsigned long)(&__ramdisk_begin));
++ puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
++ }
++
++ /* assume the chunk below 8M is free */
++ avail_ram = (char *)AVAIL_RAM_START;
++ end_avail = (char *)AVAIL_RAM_END;
++
++ /* Display standard Linux/MIPS boot prompt for kernel args */
++ puts("Uncompressing Linux at load address ");
++ puthex(LOADADDR);
++ puts("\n");
++ /* I don't like this hard coded gunzip size (fixme) */
++ gunzip((void *)LOADADDR, 0x400000, zimage_start, &zimage_size);
++ puts("Now booting the kernel\n");
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c
+--- linux-2.6.16.7/arch/mips/boot/compressed/common/no_initrd.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/common/no_initrd.c 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,2 @@
++char initrd_data[1];
++int initrd_len = 0;
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/images/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/images/Makefile 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,17 @@
++
++#
++# This dir holds all of the images for MIPS machines.
++# Tom Rini January 2001
++# Pete Popov 2004
++
++extra-y := vmlinux.bin vmlinux.gz
++
++OBJCOPYFLAGS_vmlinux.bin := -O binary
++$(obj)/vmlinux.bin: vmlinux FORCE
++ $(call if_changed,objcopy)
++
++$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
++ $(call if_changed,gzip)
++
++# Files generated that shall be removed upon make clean
++clean-files := vmlinux* zImage*
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/nonstdio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/nonstdio.h 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,18 @@
++/*
++ * Copyright (C) Paul Mackerras 1997.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++typedef int FILE;
++extern FILE *stdin, *stdout;
++#define NULL ((void *)0)
++#define EOF (-1)
++#define fopen(n, m) NULL
++#define fflush(f) 0
++#define fclose(f) 0
++extern char *fgets();
++
++#define perror(s) printf("%s: no files!\n", (s))
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/ns16550.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/ns16550.h 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,46 @@
++/*
++ * NS16550 Serial Port
++ */
++
++/*
++ * Figure out which file will have the definitons of COMx
++ */
++
++/* Some machines have their uart registers 16 bytes apart. Most don't.
++ * TODO: Make this work like drivers/char/serial does - Tom */
++#if !defined(UART_REG_PAD)
++#define UART_REG_PAD(x)
++#endif
++
++struct NS16550
++ {
++ unsigned char rbr; /* 0 */
++ UART_REG_PAD(rbr)
++ unsigned char ier; /* 1 */
++ UART_REG_PAD(ier)
++ unsigned char fcr; /* 2 */
++ UART_REG_PAD(fcr)
++ unsigned char lcr; /* 3 */
++ UART_REG_PAD(lcr)
++ unsigned char mcr; /* 4 */
++ UART_REG_PAD(mcr)
++ unsigned char lsr; /* 5 */
++ UART_REG_PAD(lsr)
++ unsigned char msr; /* 6 */
++ UART_REG_PAD(msr)
++ unsigned char scr; /* 7 */
++ };
++
++#define thr rbr
++#define iir fcr
++#define dll rbr
++#define dlm ier
++
++#define LSR_DR 0x01 /* Data ready */
++#define LSR_OE 0x02 /* Overrun */
++#define LSR_PE 0x04 /* Parity error */
++#define LSR_FE 0x08 /* Framing error */
++#define LSR_BI 0x10 /* Break */
++#define LSR_THRE 0x20 /* Xmit holding register empty */
++#define LSR_TEMT 0x40 /* Xmitter empty */
++#define LSR_ERR 0x80 /* Error */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h
+--- linux-2.6.16.7/arch/mips/boot/compressed/include/pb1000_serial.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/include/pb1000_serial.h 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,20 @@
++/*
++ * arch/ppc/boot/include/sandpoint_serial.h
++ *
++ * Location of the COM ports on Motorola SPS Sandpoint machines
++ *
++ * Author: Mark A. Greer
++ * mgreer@mvista.com
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#define COM1 0xfe0003f8
++#define COM2 0xfe0002f8
++#define COM3 0x00000000 /* No COM3 */
++#define COM4 0x00000000 /* No COM4 */
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/ld.script linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script
+--- linux-2.6.16.7/arch/mips/boot/compressed/ld.script 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/ld.script 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,151 @@
++OUTPUT_ARCH(mips)
++ENTRY(start)
++SECTIONS
++{
++ /* Read-only sections, merged into text segment: */
++ /* . = 0x81000000; */
++ .init : { *(.init) } =0
++ .text :
++ {
++ _ftext = . ;
++ *(.text)
++ *(.rodata) *(.rodata.*)
++ *(.rodata1)
++ /* .gnu.warning sections are handled specially by elf32.em. */
++ *(.gnu.warning)
++ } =0
++ .kstrtab : { *(.kstrtab) }
++
++ . = ALIGN(16); /* Exception table */
++ __start___ex_table = .;
++ __ex_table : { *(__ex_table) }
++ __stop___ex_table = .;
++
++ __start___dbe_table = .; /* Exception table for data bus errors */
++ __dbe_table : { *(__dbe_table) }
++ __stop___dbe_table = .;
++
++ __start___ksymtab = .; /* Kernel symbol table */
++ __ksymtab : { *(__ksymtab) }
++ __stop___ksymtab = .;
++
++ _etext = .;
++
++ . = ALIGN(8192);
++ .data.init_task : { *(.data.init_task) }
++
++ /* Startup code */
++ . = ALIGN(4096);
++ __init_begin = .;
++ .text.init : { *(.text.init) }
++ .data.init : { *(.data.init) }
++ . = ALIGN(16);
++ __setup_start = .;
++ .setup.init : { *(.setup.init) }
++ __setup_end = .;
++ __initcall_start = .;
++ .initcall.init : { *(.initcall.init) }
++ __initcall_end = .;
++ . = ALIGN(4096); /* Align double page for init_task_union */
++ __init_end = .;
++
++ . = ALIGN(4096);
++ .data.page_aligned : { *(.data.idt) }
++
++ . = ALIGN(32);
++ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
++
++ .fini : { *(.fini) } =0
++ .reginfo : { *(.reginfo) }
++ /* Adjust the address for the data segment. We want to adjust up to
++ the same address within the page on the next page up. It would
++ be more correct to do this:
++ . = .;
++ The current expression does not correctly handle the case of a
++ text segment ending precisely at the end of a page; it causes the
++ data segment to skip a page. The above expression does not have
++ this problem, but it will currently (2/95) cause BFD to allocate
++ a single segment, combining both text and data, for this case.
++ This will prevent the text segment from being shared among
++ multiple executions of the program; I think that is more
++ important than losing a page of the virtual address space (note
++ that no actual memory is lost; the page which is skipped can not
++ be referenced). */
++ . = .;
++ .data :
++ {
++ _fdata = . ;
++ *(.data)
++
++ /* Put the compressed image here, so bss is on the end. */
++ __image_begin = .;
++ *(.image)
++ __image_end = .;
++ /* Align the initial ramdisk image (INITRD) on page boundaries. */
++ . = ALIGN(4096);
++ __ramdisk_begin = .;
++ *(.initrd)
++ __ramdisk_end = .;
++ . = ALIGN(4096);
++
++ CONSTRUCTORS
++ }
++ .data1 : { *(.data1) }
++ _gp = . + 0x8000;
++ .lit8 : { *(.lit8) }
++ .lit4 : { *(.lit4) }
++ .ctors : { *(.ctors) }
++ .dtors : { *(.dtors) }
++ .got : { *(.got.plt) *(.got) }
++ .dynamic : { *(.dynamic) }
++ /* We want the small data sections together, so single-instruction offsets
++ can access them all, and initialized data all before uninitialized, so
++ we can shorten the on-disk segment size. */
++ .sdata : { *(.sdata) }
++ . = ALIGN(4);
++ _edata = .;
++ PROVIDE (edata = .);
++
++ __bss_start = .;
++ _fbss = .;
++ .sbss : { *(.sbss) *(.scommon) }
++ .bss :
++ {
++ *(.dynbss)
++ *(.bss)
++ *(COMMON)
++ . = ALIGN(4);
++ _end = . ;
++ PROVIDE (end = .);
++ }
++
++ /* Sections to be discarded */
++ /DISCARD/ :
++ {
++ *(.text.exit)
++ *(.data.exit)
++ *(.exitcall.exit)
++ }
++
++ /* This is the MIPS specific mdebug section. */
++ .mdebug : { *(.mdebug) }
++ /* These are needed for ELF backends which have not yet been
++ converted to the new style linker. */
++ .stab 0 : { *(.stab) }
++ .stabstr 0 : { *(.stabstr) }
++ /* DWARF debug sections.
++ Symbols in the .debug DWARF section are relative to the beginning of the
++ section so we begin .debug at 0. It's not clear yet what needs to happen
++ for the others. */
++ .debug 0 : { *(.debug) }
++ .debug_srcinfo 0 : { *(.debug_srcinfo) }
++ .debug_aranges 0 : { *(.debug_aranges) }
++ .debug_pubnames 0 : { *(.debug_pubnames) }
++ .debug_sfnames 0 : { *(.debug_sfnames) }
++ .line 0 : { *(.line) }
++ /* These must appear regardless of . */
++ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
++ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
++ .comment : { *(.comment) }
++ .note : { *(.note) }
++}
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile
+--- linux-2.6.16.7/arch/mips/boot/compressed/lib/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/lib/Makefile 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,11 @@
++
++#
++# Makefile for some libs needed by zImage.
++#
++
++lib-y := $(addprefix ../../../../../lib/zlib_inflate/, \
++ infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o) \
++ $(addprefix ../../../../../lib/, ctype.o string.o) \
++ $(addprefix ../../../../../arch/mips/lib/, memcpy.o) \
++
++
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/entry linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/entry 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/entry 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,12 @@
++#!/bin/sh
++
++# grab the kernel_entry address from the vmlinux elf image
++entry=`$1 $2 | grep kernel_entry`
++
++fs=`echo $entry | grep ffffffff` # check toolchain output
++
++if [ -n "$fs" ]; then
++ echo "0x"`$1 $2 | grep kernel_entry | cut -c9- | awk '{print $1}'`
++else
++ echo "0x"`$1 $2 | grep kernel_entry | cut -c1- | awk '{print $1}'`
++fi
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/offset linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/offset 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/offset 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,3 @@
++#!/bin/sh
++
++echo "0x"`$1 -h $2 | grep $3 | grep -v zvmlinux| awk '{print $6}'`
+diff -urN linux-2.6.16.7/arch/mips/boot/compressed/utils/size linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size
+--- linux-2.6.16.7/arch/mips/boot/compressed/utils/size 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/boot/compressed/utils/size 2006-04-20 19:27:12.000000000 +0200
+@@ -0,0 +1,4 @@
++#!/bin/sh
++
++OFFSET=`$1 -h $2 | grep $3 | grep -v zvmlinux | awk '{print $3}'`
++echo "0x"$OFFSET
diff --git a/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
new file mode 100644
index 000000000..3edd749bb
--- /dev/null
+++ b/openwrt/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch
@@ -0,0 +1,285 @@
+diff -urN linux-2.6.16.7/drivers/char/watchdog/Kconfig linux-2.6.16.7.new/drivers/char/watchdog/Kconfig
+--- linux-2.6.16.7/drivers/char/watchdog/Kconfig 2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/char/watchdog/Kconfig 2006-04-22 16:40:32.000000000 +0200
+@@ -460,6 +460,14 @@
+ timer expired and no process has written to /dev/watchdog during
+ that time.
+
++config MTX1_WATCHDOG
++ tristate "MTX-1 Hardware Watchdog"
++ depends on WATCHDOG && MIPS_MTX1
++ help
++ Hardware driver for the AccessCube MTX-1 watchdog. This is a
++ watchdog timer that will reboot the machine after a 100 seconds
++ timer expired.
++
+ # S390 Architecture
+
+ config ZVM_WATCHDOG
+diff -urN linux-2.6.16.7/drivers/char/watchdog/Makefile linux-2.6.16.7.new/drivers/char/watchdog/Makefile
+--- linux-2.6.16.7/drivers/char/watchdog/Makefile 2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/char/watchdog/Makefile 2006-04-22 16:38:31.000000000 +0200
+@@ -65,6 +65,7 @@
+
+ # MIPS Architecture
+ obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o
+
+ # S390 Architecture
+
+diff -urN linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c
+--- linux-2.6.16.7/drivers/char/watchdog/mtx-1_watchdog.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/drivers/char/watchdog/mtx-1_watchdog.c 2006-04-22 16:38:49.000000000 +0200
+@@ -0,0 +1,252 @@
++/*
++ * Driver for the MTX-1 Watchdog.
++ *
++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
++ * http://www.4g-systems.biz
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Neither Michael Stickel nor 4G Systems admit liability nor provide
++ * warranty for any of this software. This material is provided
++ * "AS-IS" and at no charge.
++ *
++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
++ *
++ * Release 0.01.
++ *
++ * Author: Michael Stickel michael.stickel@4g-systems.biz
++ *
++ *
++ * The Watchdog is configured to reset the MTX-1
++ * if it is not triggered for 100 seconds.
++ * It should not be triggered more often than 1.6 seconds.
++ *
++ * A timer triggers the watchdog every 5 seconds, until
++ * it is opened for the first time. After the first open
++ * it MUST be triggered every 2..95 seconds.
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <linux/fs.h>
++
++#include <asm/mach-au1x00/au1000.h>
++
++#ifndef FALSE
++# define FALSE (0)
++#endif
++
++#ifndef TRUE
++# define TRUE (!FALSE)
++#endif
++
++
++//---------[ Hardware Functions ]-----------------
++
++static void mtx1_trigger_wd (void)
++{
++ /*
++ * toggle GPIO2_15
++ */
++
++ u32 tmp = au_readl(GPIO2_DIR);
++ tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
++ au_writel (tmp, GPIO2_DIR);
++}
++
++static void mtx1_enable_wd (void)
++{
++ au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
++}
++
++static void mtx1_disable_wd (void)
++{
++ au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
++}
++
++
++//---------[ Timer Functions ]-----------------
++
++static struct timer_list wd_trigger_timer;
++static char timer_is_running = FALSE;
++
++static void wd_timer_callback (unsigned long data)
++{
++ if (timer_is_running)
++ mod_timer (&wd_trigger_timer, jiffies + 5 * HZ);
++ mtx1_trigger_wd ();
++}
++
++static void start_wd_timer (void)
++{
++ if (!timer_is_running) {
++ struct timer_list *t = &wd_trigger_timer;
++
++ init_timer (t);
++ t->function = wd_timer_callback;
++ t->data = (unsigned long)0L;
++ t->expires = jiffies + 5 * HZ; // 5 seconds.
++ add_timer (t);
++ timer_is_running = TRUE;
++ }
++}
++
++
++
++static void stop_wd_timer (void)
++{
++ if (timer_is_running) {
++ del_timer(&wd_trigger_timer);
++ timer_is_running = FALSE;
++ }
++}
++
++
++//---------[ File Functions ]-----------------
++
++static char restart_after_close;
++
++static int mtx1wd_open (struct inode *inode, struct file *file)
++{
++ if (MINOR(inode->i_rdev) != WATCHDOG_MINOR) return -ENODEV;
++ //MOD_INC_USE_COUNT;
++
++ // stop the timer, if it is running. It will not be
++ // started again, until the module is loaded again.
++ stop_wd_timer();
++
++ // sleep for 2 seconds, to ensure, that the wd is
++ // not triggered more often than every 2 seconds.
++ schedule_timeout (2 * HZ);
++
++ return 0;
++}
++
++
++static int mtx1wd_release (struct inode *inode, struct file *file) {
++ if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) {
++ }
++ if (restart_after_close)
++ start_wd_timer();
++ //MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++
++static ssize_t mtx1wd_write (struct file *file, const char *buf, size_t count, loff_t *ppos) {
++
++ mtx1_trigger_wd ();
++
++ if (count > 0) {
++ char buffer[10];
++ int n = (count>9)?9:count;
++
++ if (copy_from_user (&buffer, buf, n))
++ return -EFAULT;
++ buffer[n]=0;
++
++ if (count >= 4 && strncmp("auto", buffer, 4)==0)
++ restart_after_close = 1;
++
++ else if (count >= 6 && strncmp("manual", buffer, 6)==0)
++ restart_after_close = 0;
++
++ return n;
++ }
++
++ return 0;
++}
++
++static ssize_t mtx1wd_read (struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++ char * state = restart_after_close ? "auto\n" : "manual\n";
++ int n = strlen(state)+1;
++
++ if (file->f_pos >= n)
++ return 0;
++
++ if (count < n)
++ return -EINVAL;
++
++ if(copy_to_user(buf, state, n))
++ return -EFAULT;
++
++ file->f_pos += n;
++
++ return n;
++}
++
++static struct file_operations mtx1wd_fops = {
++ .owner = THIS_MODULE,
++ .read = mtx1wd_read,
++ .write = mtx1wd_write,
++ .open = mtx1wd_open,
++ .release = mtx1wd_release
++};
++
++
++static struct miscdevice mtx1wd_miscdev = {
++ WATCHDOG_MINOR,
++ "watchdog",
++ &mtx1wd_fops
++};
++
++
++
++//---------[ Module Functions ]-----------------
++
++
++void cleanup_module (void)
++{
++ // stop the timer, if it is running.
++ stop_wd_timer();
++
++ misc_deregister(&mtx1wd_miscdev);
++
++ mtx1_disable_wd ();
++}
++
++
++static int __init init_mtx1_watchdog(void)
++{
++ printk("MTX-1 watchdog driver\n");
++
++ misc_register(&mtx1wd_miscdev);
++
++ restart_after_close = 0;
++
++ mtx1_enable_wd ();
++
++ //-- trigger it for the first time.
++ //-- We do not exactly know how long it has not been triggered.
++ mtx1_trigger_wd ();
++
++ // start a timer, that calls mtx1_trigger_wd every 5 seconds.
++ start_wd_timer();
++
++ return 0;
++}
++
++static void __exit exit_mtx1_watchdog(void) {
++
++ misc_deregister(&mtx1wd_miscdev);
++}
++
++module_init(init_mtx1_watchdog);
++module_exit(exit_mtx1_watchdog);
++
++MODULE_AUTHOR("Michael Stickel");
++MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
++MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 17:33:31 +0000