[at91] Update to 2.6.35.7

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23400 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 22 insertions, 10 deletions

diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index 446de3405..dc9b86093 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AT91
 FEATURES:=squashfs jffs2 targz
 CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -funit-at-a-time
 
-LINUX_VERSION:=2.6.34.7
+LINUX_VERSION:=2.6.35.7
 DEVICE_TYPE=
 
 include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/at91/config-default b/target/linux/at91/config-default
index 5d3058569..9da6aace0 100644
--- a/target/linux/at91/config-default
+++ b/target/linux/at91/config-default
@@ -12,16 +12,19 @@ CONFIG_ARCH_AT91SAM9G20=y
 # CONFIG_ARCH_AT91SAM9G45 is not set
 # CONFIG_ARCH_AT91SAM9RL is not set
 # CONFIG_ARCH_AT91X40 is not set
+# CONFIG_ARCH_CNS3XXX is not set
 # CONFIG_ARCH_NUC93X is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_S5P6440 is not set
 # CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
 # CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_VEXPRESS is not set
 CONFIG_ARM=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_THUMB=y
@@ -72,10 +75,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_PWM=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVICE=y
-# CONFIG_GPIO_PWM is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HAMRADIO is not set
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -110,6 +111,8 @@ CONFIG_MACB=y
 # CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
 # CONFIG_MACH_CPU9G20 is not set
 CONFIG_MACH_NETUS_FOXBOARD=y
+# CONFIG_MACH_PORTUXG20 is not set
+# CONFIG_MACH_STAMP9G20 is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MII is not set
 CONFIG_MMC=y
@@ -121,6 +124,7 @@ CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
 CONFIG_NEED_DMA_MAP_STATE=y
 # CONFIG_NETDEV_1000 is not set
+# CONFIG_NETUS_FOXGM is not set
 CONFIG_NETUS_HEARTBEAT_LED=y
 CONFIG_NETUS_SERIALS=y
 # CONFIG_NETUS_USE_DATAFLASH is not set
@@ -131,10 +135,12 @@ CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PCI_SYSCALL is not set
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
+# CONFIG_PLAT_SPEAR is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 CONFIG_RTC_DRV_AT91SAM9_RTT=0
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SCSI_MOD=y
 # CONFIG_SDIO_UART is not set
diff --git a/target/linux/at91/patches/800-netus-support.patch b/target/linux/at91/patches/800-netus-support.patch
index 0cd91dbf2..ad3301762 100755
--- a/target/linux/at91/patches/800-netus-support.patch
+++ b/target/linux/at91/patches/800-netus-support.patch
@@ -14,16 +14,17 @@
  endif
  
  # ----------------------------------------------------------
-@@ -444,6 +451,26 @@
+@@ -444,6 +451,40 @@
  	  On AT91SAM926x boards both types of NAND flash can be present
  	  (8 and 16 bit data bus width).
  
 +config NETUS_HEARTBEAT_LED
 +	bool "Use heartbeat trigger for led"
 +	depends on MACH_NETUS_FOXBOARD
++	select LEDS_TRIGGER_HEARTBEAT
 +	help
 +	  Select this option to enable default trigger heartbeart for
-+	  FoxBoardG20 red led.
++	  FoxBoardG20 user led.
 +
 +config NETUS_SERIALS
 +	bool "Enable serials"
@@ -34,6 +35,11 @@
 +
 +config NETUS_USE_DATAFLASH
 +	bool "Enable the dataflash"
++	select MTD_DATAFLASH
++	select MTD_PARTITIONS
++	select MTD_CMDLINE_PARTS
++	select MTD_CHAR
++	select MTD_BLOCK
 +	depends on MACH_NETUS_FOXBOARD
 +	help
 +	  Select this option to use the dataflash.
@@ -49,12 +55,12 @@
  # ----------------------------------------------------------
  
  comment "AT91 Feature Selections"
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board
- obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
- obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
+--- linux-2.6.35.4.orig/arch/arm/mach-at91/Makefile	2010-09-18 13:29:33.000000000 +0200
++++ linux-2.6.35.4/arch/arm/mach-at91/Makefile	2010-09-18 13:31:31.000000000 +0200
+@@ -65,6 +65,7 @@
  obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
+ obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
+ obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 +obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o
  
  # AT91SAM9G45 board-specific support