[olpc] remove target since it was merged as a subtarget of x86

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19035 3c298f89-4303-0410-b956-a3cf2f4a3e73

13 files changed, 0 insertions, 1015 deletions

diff --git a/target/linux/olpc/Makefile b/target/linux/olpc/Makefile
deleted file mode 100644
index 2f756290c..000000000
--- a/target/linux/olpc/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=i386
-BOARD:=olpc
-BOARDNAME:=OLPC XO-1
-FEATURES:=squashfs ext2
-
-LINUX_VERSION:=2.6.30.10
-
-include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci kmod-libertas
-
-$(eval $(call Target,generic))
-$(eval $(call BuildTarget))
-$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \
-   	Please install mkisofs. \
-))
diff --git a/target/linux/olpc/base-files/etc/X11/xorg.conf b/target/linux/olpc/base-files/etc/X11/xorg.conf
deleted file mode 100644
index d98a8f87a..000000000
--- a/target/linux/olpc/base-files/etc/X11/xorg.conf
+++ /dev/null
@@ -1,71 +0,0 @@
-# xorg configuration
-
-Section "ServerLayout"
-	Identifier     "Default Layout"
-	Screen      0  "Screen0" 0 0
-	InputDevice    "Mouse0" "CorePointer"
-	InputDevice    "Keyboard0" "CoreKeyboard"
-EndSection
-
-Section "Files"
-	FontPath     "/usr/lib/X11/fonts/misc"
-EndSection
-
-Section "Module"
-	Load  "dbe"
-	Load  "extmod"
-	Load  "fbdevhw"
-#	Load  "glx"
-	Load  "record"
-	Load  "freetype"
-	Load  "type1"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Keyboard0"
-	Driver      "keyboard"
-	Option	    "XkbModel" "pc105"
-	Option	    "XkbLayout" "us"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Mouse0"
-	Driver      "mouse"
-	Option	    "Protocol" "PS/2"
-	Option	    "Device" "/dev/psaux"
-	Option	    "ZAxisMapping" "4 5"
-	Option	    "Emulate3Buttons" "yes"
-EndSection
-
-Section "Monitor"
-	Identifier   "Monitor0"
-	VendorName   "Monitor Vendor"
-	ModelName    "OWRT"
-	Option	     "dpms"
-EndSection
-
-Section "Device"
-	Identifier  "FBDev"
-	Driver      "fbdev"
-	#Option     "shadowfb" "off"
-	VideoRam    4096
-EndSection
-
-Section "Screen"
-    Identifier	"Screen0"
-    Device	"FBDev"
-    Monitor	"Monitor0"
-    DefaultDepth 16
-
-    SubSection "Display"
-        Depth		16
-        Modes		"1200x900-75"
-    EndSubsection
-
-EndSection
-
-Section "DRI"
-	Group        0
-	Mode         0666
-EndSection
-
diff --git a/target/linux/olpc/base-files/etc/config/network b/target/linux/olpc/base-files/etc/config/network
deleted file mode 100644
index faa8f0e78..000000000
--- a/target/linux/olpc/base-files/etc/config/network
+++ /dev/null
@@ -1,11 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
-        option ifname   lo
-        option proto    static
-        option ipaddr   127.0.0.1
-        option netmask  255.0.0.0
-
-config interface wlan
-        option ifname   eth0
-        option proto    dhcp
diff --git a/target/linux/olpc/base-files/etc/preinit.arch b/target/linux/olpc/base-files/etc/preinit.arch
deleted file mode 100644
index f29f0d448..000000000
--- a/target/linux/olpc/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,2 +0,0 @@
-mount -t proc none /proc
-grep 'failsafe=' /proc/cmdline && export FAILSAFE=true
diff --git a/target/linux/olpc/base-files/lib/upgrade/platform.sh b/target/linux/olpc/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index ffd0b93ab..000000000
--- a/target/linux/olpc/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-platform_check_image() {
-	[ "$ARGC" -gt 1 ] && return 1
-
-	case "$(get_magic_word "$1")" in
-		48eb) return 0;;
-		*)
-			echo "Invalid image type"
-			return 1
-		;;
-	esac
-}
-
-platform_do_upgrade() {
-	get_image "$1" > /dev/hda
-	sync
-}
-
-x86_prepare_ext2() {
-	# if we're running from ext2, we need to make sure that we have a mtd 
-	# partition that points to the active rootfs partition.
-	# however this only matters if we actually need to preserve the config files
-	[ "$SAVE_CONFIG" -eq 1 ] && return 0
-	grep rootfs /proc/mtd >/dev/null || {
-		echo /dev/hda2,65536,rootfs > /sys/module/block2mtd/parameters/block2mtd
-	}
-}
-append sysupgrade_pre_upgrade x86_prepare_ext2
diff --git a/target/linux/olpc/config-2.6.30 b/target/linux/olpc/config-2.6.30
deleted file mode 100644
index 808d8ee7b..000000000
--- a/target/linux/olpc/config-2.6.30
+++ /dev/null
@@ -1,522 +0,0 @@
-CONFIG_4KSTACKS=y
-# CONFIG_64BIT is not set
-CONFIG_ACPI_AC=y
-# CONFIG_ACPI_ASUS is not set
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CONTAINER is not set
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DOCK is not set
-CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROCFS_POWER=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_TOSHIBA is not set
-# CONFIG_ACPI_WMI is not set
-CONFIG_ACPI=y
-# CONFIG_AGP is not set
-# CONFIG_APM is not set
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_AUDIT_ARCH is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
-# CONFIG_BACKLIGHT_PROGEAR is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BATTERY_OLPC=y
-CONFIG_BINARY_PRINTF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOUNCE=y
-CONFIG_CAN_PM_TRACE=y
-# CONFIG_CC_STACKPROTECTOR is not set
-CONFIG_CHR_DEV_SG=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_COMPAL_LAPTOP is not set
-CONFIG_COMPAT_VDSO=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_SUP_AMD=y
-# CONFIG_CPU_SUP_CENTAUR is not set
-# CONFIG_CPU_SUP_CYRIX_32 is not set
-# CONFIG_CPU_SUP_INTEL is not set
-# CONFIG_CPU_SUP_TRANSMETA_32 is not set
-# CONFIG_CPU_SUP_UMC_32 is not set
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DELL_RBU is not set
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_DEVPORT=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_DMIID=y
-CONFIG_DMI=y
-CONFIG_DOUBLEFAULT=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EDAC is not set
-# CONFIG_EDD is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EFI is not set
-CONFIG_ELF_CORE=y
-CONFIG_EXT2_FS=y
-CONFIG_FAST_CMPXCHG_LOCAL=y
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_GEODE_GX1 is not set
-# CONFIG_FB_GEODE_GX is not set
-CONFIG_FB_GEODE_LX=y
-CONFIG_FB_GEODE=y
-CONFIG_FB=y
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONTS is not set
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FREEZER=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_CPU is not set
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_GENERIC_TIME_VSYSCALL is not set
-CONFIG_GEODE_MFGPT_TIMER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
-# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_HIBERNATION=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_HPET_EMULATE_RTC=y
-# CONFIG_HPET is not set
-CONFIG_HPET_TIMER=y
-CONFIG_HT_IRQ=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_HW_RANDOM_AMD is not set
-CONFIG_HW_RANDOM_GEODE=y
-# CONFIG_HW_RANDOM_INTEL is not set
-CONFIG_HW_RANDOM_VIA=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I8K is not set
-# CONFIG_IMA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-# CONFIG_IO_DELAY_UDELAY is not set
-# CONFIG_IOMMU_API is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_ISDN is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KEXEC_JUMP is not set
-CONFIG_KEXEC=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KGDB is not set
-CONFIG_KTIME_SCALAR=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LEDS_ALIX2 is not set
-# CONFIG_LEDS_CLEVO_MAIL is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOGO is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_MARKERS=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MCA is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MGEODEGX1 is not set
-CONFIG_MGEODE_LX=y
-# CONFIG_MICROCODE is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC=y
-# CONFIG_MMIOTRACE is not set
-# CONFIG_MOUSE_BCM5974 is not set
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MPSC is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PCI=y
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTRR is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NOP_TRACER=y
-CONFIG_NR_CPUS=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-CONFIG_OLPC=y
-CONFIG_OPROFILE=y
-# CONFIG_OPTIMIZE_INLINING is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PARAVIRT_GUEST is not set
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_GOANY is not set
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_GOOLPC=y
-CONFIG_PCI_OLPC=y
-CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_PDA_POWER is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_PM_TRACE_RTC is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_PM=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_PNP=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_TRACER is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_PROCESSOR_SELECT=y
-CONFIG_PROFILING=y
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RELAY=y
-# CONFIG_RELOCATABLE is not set
-CONFIG_RING_BUFFER=y
-CONFIG_RTC=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCSI=y
-# CONFIG_SCx200 is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SPARSE_IRQ is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_STACKTRACE=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SUSPEND=y
-# CONFIG_SYSPROF_TRACER is not set
-# CONFIG_TC1100_WMI is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_THERMAL=y
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_TOSHIBA is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRACING=y
-CONFIG_UID16=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB=y
-CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGA_CONSOLE=y
-CONFIG_VM86=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_VT=y
-# CONFIG_WATCHDOG is not set
-CONFIG_X86_32_LAZY_GS=y
-CONFIG_X86_32=y
-# CONFIG_X86_64 is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-CONFIG_X86_BSWAP=y
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_CMPXCHG=y
-# CONFIG_X86_CPU_DEBUG is not set
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-CONFIG_X86_CPU=y
-CONFIG_X86_DEBUGCTLMSR=y
-# CONFIG_X86_DS is not set
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_EXTENDED_PLATFORM=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GX_SUSPMOD is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
-CONFIG_X86_INVLPG=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_L1_CACHE_SHIFT=5
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_LONGRUN is not set
-# CONFIG_X86_MCE is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_P4_CLOCKMOD is not set
-# CONFIG_X86_PAE is not set
-CONFIG_X86_PLATFORM_DEVICES=y
-CONFIG_X86_PM_TIMER=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-# CONFIG_X86_POWERNOW_K8 is not set
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_X86_RDC321X is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_RESERVE_LOW_64K is not set
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_LIB is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_TSC=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_XADD=y
-CONFIG_X86=y
-# CONFIG_ZONE_DMA32 is not set
diff --git a/target/linux/olpc/generic/profiles/000-Generic.mk b/target/linux/olpc/generic/profiles/000-Generic.mk
deleted file mode 100644
index d7e6b7eb1..000000000
--- a/target/linux/olpc/generic/profiles/000-Generic.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Generic
-  NAME:=Generic
-  PACKAGES:=
-endef
-
-define Profile/Generic/Description
-	Generic Profile
-endef
-$(eval $(call Profile,Generic))
diff --git a/target/linux/olpc/generic/target.mk b/target/linux/olpc/generic/target.mk
deleted file mode 100644
index ea16d6379..000000000
--- a/target/linux/olpc/generic/target.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-SUBTARGET:=generic
-
-define Target/Description
-	Build firmware images for OLPC
-endef
-
diff --git a/target/linux/olpc/image/Config.in b/target/linux/olpc/image/Config.in
deleted file mode 100644
index 27bbb961a..000000000
--- a/target/linux/olpc/image/Config.in
+++ /dev/null
@@ -1,23 +0,0 @@
-config OLPC_BOOTSCRIPT_IMAGES
-    bool "Build images with bootscript"
-    depends TARGET_olpc
-    depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_ISO
-    default y
-
-config OLPC_BOOTSCRIPT_IMAGES_PAD
-	bool "Pad bootscript images to filesystem size (for JFFS2)"
-	depends OLPC_BOOTSCRIPT_IMAGES
-
-config OLPC_BOOTSCRIPT_KERNELPART
-    int "Kernel partition size (in MB)"
-    depends OLPC_BOOTSCRIPT_IMAGES
-    default 4
-
-config OLPC_BOOTSCRIPT_ROOTPART
-    string
-    prompt "Root partition on target device" if OLPC_BOOTSCRIPT_IMAGES
-    default "/dev/sda2"
-    help
-        The root partition on the final device.  If you don't know,
-        you probably want the default (/dev/sda2).
-
diff --git a/target/linux/olpc/image/Makefile b/target/linux/olpc/image/Makefile
deleted file mode 100644
index 7ba712da6..000000000
--- a/target/linux/olpc/image/Makefile
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2007-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-export PATH=$(TARGET_PATH):/sbin
-ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_BOOTSCRIPT_ROOTPART)))
-#"))")) # fix vim's broken syntax highlighting
-
-ROOTDELAY=10
-
-ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y)
-  define Image/cmdline/squashfs
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/cmdline/jffs2-64k
-    block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/cmdline/jffs2-128k
-    block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
-  endef
-
-  define Image/cmdline/ext2
-    root=$(ROOTPART) rootfstype=ext2 rootwait
-  endef
-
-  define Image/Build/bootscript
-	# left here because the image builder doesnt need these
-	$(INSTALL_DIR) $(KDIR)/root.bootscript/boot
-	$(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
-	sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
-		./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
-	PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
-  endef
-endif
-
-define Image/Prepare
-	cp $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
-	$(call Image/Prepare/bootscript)
-endef
-
-define Image/Build/squashfs
-    $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/BuildKernel
-	$(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
-endef
-
-define Image/Build
-	$(call Image/Build/$(1))
-	$(call Image/Build/bootscript,$(1))
-	$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs
-	$(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
-endef
-
-$(eval $(call BuildImage))
-
diff --git a/target/linux/olpc/image/gen_image.sh b/target/linux/olpc/image/gen_image.sh
deleted file mode 100755
index 4fd6e377e..000000000
--- a/target/linux/olpc/image/gen_image.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (C) 2006 - 2007 OpenWrt.org
-set -x 
-[ $# == 5 ] || {
-    echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image>"
-    exit 1
-}
-
-OUTPUT="$1"
-KERNELSIZE="$2"
-KERNELDIR="$3"
-ROOTFSSIZE="$4"
-ROOTFSIMAGE="$5"
-
-rm -f "$OUTPUT"
-
-head=16
-sect=63
-cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512)))
-
-# create partition table
-set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m`
-
-KERNELOFFSET="$(($1 / 512))"
-KERNELSIZE="$(($2 / 512))"
-ROOTFSOFFSET="$(($3 / 512))"
-ROOTFSSIZE="$(($4 / 512))"
-
-BLOCKS="$((($KERNELSIZE / 2) - 1))"
-
-genext2fs -d "$KERNELDIR" -b "$BLOCKS" "$OUTPUT.kernel"
-dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc
-[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE"
-dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc
-#rm -f "$OUTPUT.kernel"
diff --git a/target/linux/olpc/image/olpc.fth b/target/linux/olpc/image/olpc.fth
deleted file mode 100644
index 5914be660..000000000
--- a/target/linux/olpc/image/olpc.fth
+++ /dev/null
@@ -1,5 +0,0 @@
-\ Boot script
-" u:\boot\vmlinuz" to boot-device
-" @CMDLINE@ noinitrd console=ttyS0,115200 console=tty0" to boot-file
-unfreeze
-boot
diff --git a/target/linux/olpc/patches-2.6.30/300-block2mtd_init.patch b/target/linux/olpc/patches-2.6.30/300-block2mtd_init.patch
deleted file mode 100644
index 12165b52b..000000000
--- a/target/linux/olpc/patches-2.6.30/300-block2mtd_init.patch
+++ /dev/null
@@ -1,210 +0,0 @@
---- a/arch/x86/kernel/vmlinux_32.lds.S
-+++ b/arch/x86/kernel/vmlinux_32.lds.S
-@@ -136,6 +136,12 @@ SECTIONS
- 	INITCALLS
-   	__initcall_end = .;
-   }
-+  .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
-+    __root_initcall_start = .;
-+    INITCALLS_ROOT
-+    __root_initcall_end = .;
-+  }
-+   
-   .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-   	__con_initcall_start = .;
- 	*(.con_initcall.init)
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -18,10 +18,18 @@
- #include <linux/buffer_head.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
- 
- #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
- #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
- 
-+struct retry {
-+    struct list_head list;
-+    const char *val;
-+};
-+
-+static LIST_HEAD(retry_list);
- 
- /* Info for the block device */
- struct block2mtd_dev {
-@@ -33,10 +41,34 @@ struct block2mtd_dev {
- 	char devname[0];
- };
- 
-+static int block2mtd_setup2(const char *val);
- 
- /* Static info about the MTD, used in cleanup_module */
- static LIST_HEAD(blkmtd_device_list);
- 
-+static int add_retry(const char *val) {
-+    struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
-+
-+    INIT_LIST_HEAD(&r->list);
-+    r->val = val;
-+    list_add(&r->list, &retry_list);
-+
-+    return 0;
-+}
-+
-+static int __init process_retries(void) {
-+    struct list_head *p, *tmp;
-+
-+    list_for_each_safe(p, tmp, &retry_list) {
-+        struct retry *r = list_entry(p, struct retry, list);
-+        block2mtd_setup2(r->val);
-+        msleep(100);
-+        list_del(p);
-+        kfree(r);
-+    }
-+    return 0;
-+}
-+rootfs_initcall(process_retries);
- 
- static struct page *page_read(struct address_space *mapping, int index)
- {
-@@ -510,7 +542,9 @@ static int block2mtd_setup2(const char *
- 	if (token[2] && (strlen(token[2]) + 1 > 80))
- 		parse_err("mtd device name too long");
- 
--	add_device(name, erase_size, token[2]);
-+	if (add_device(name, erase_size, token[2]) == NULL) {
-+        add_retry(val);
-+    }   
- 
- 	return 0;
- }
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -447,12 +447,14 @@
-   	*(.initcall4s.init)						\
-   	*(.initcall5.init)						\
-   	*(.initcall5s.init)						\
--	*(.initcallrootfs.init)						\
-   	*(.initcall6.init)						\
-   	*(.initcall6s.init)						\
-   	*(.initcall7.init)						\
-   	*(.initcall7s.init)
- 
-+#define INITCALLS_ROOT							\
-+	*(.initcallrootfs.init)
-+
- /**
-  * PERCPU_VADDR - define output section for percpu area
-  * @vaddr: explicit base address (optional)
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -176,16 +176,8 @@ static int __init fs_names_setup(char *s
- 	return 1;
- }
- 
--static unsigned int __initdata root_delay;
--static int __init root_delay_setup(char *str)
--{
--	root_delay = simple_strtoul(str, NULL, 0);
--	return 1;
--}
--
- __setup("rootflags=", root_data_setup);
- __setup("rootfstype=", fs_names_setup);
--__setup("rootdelay=", root_delay_setup);
- 
- static void __init get_fs_names(char *page)
- {
-@@ -365,23 +357,6 @@ void __init prepare_namespace(void)
- {
- 	int is_floppy;
- 
--	if (root_delay) {
--		printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
--		       root_delay);
--		ssleep(root_delay);
--	}
--
--	/*
--	 * wait for the known devices to complete their probing
--	 *
--	 * Note: this is a potential source of long boot delays.
--	 * For example, it is not atypical to wait 5 seconds here
--	 * for the touchpad of a laptop to initialize.
--	 */
--	wait_for_device_probe();
--
--	md_run_setup();
--
- 	if (saved_root_name[0]) {
- 		root_device_name = saved_root_name;
- 		if (!strncmp(root_device_name, "mtd", 3) ||
---- a/init/main.c
-+++ b/init/main.c
-@@ -76,6 +76,7 @@
- #ifdef CONFIG_X86_LOCAL_APIC
- #include <asm/smp.h>
- #endif
-+#include "do_mounts.h"
- 
- static int kernel_init(void *);
- 
-@@ -752,12 +753,13 @@ int do_one_initcall(initcall_t fn)
- 
- 
- extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
-+extern initcall_t __root_initcall_start[], __root_initcall_end[];
- 
--static void __init do_initcalls(void)
-+static void __init do_initcalls(initcall_t *start, initcall_t *end)
- {
- 	initcall_t *call;
- 
--	for (call = __early_initcall_end; call < __initcall_end; call++)
-+	for (call = start; call < end; call++)
- 		do_one_initcall(*call);
- 
- 	/* Make sure there is no pending stuff from the initcall sequence */
-@@ -779,7 +781,7 @@ static void __init do_basic_setup(void)
- 	usermodehelper_init();
- 	driver_init();
- 	init_irq_proc();
--	do_initcalls();
-+	do_initcalls(__early_initcall_end, __initcall_end);
- }
- 
- static void __init do_pre_smp_initcalls(void)
-@@ -840,6 +842,13 @@ static noinline int init_post(void)
- 	panic("No init found.  Try passing init= option to kernel.");
- }
- 
-+static unsigned int __initdata root_delay;
-+static int __init root_delay_setup(char *str)
-+{
-+    root_delay = simple_strtoul(str, NULL, 0);
-+    return 1;
-+}
-+__setup("rootdelay=", root_delay_setup);
- static int __init kernel_init(void * unused)
- {
- 	lock_kernel();
-@@ -879,7 +888,16 @@ static int __init kernel_init(void * unu
- 
- 	if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
- 		ramdisk_execute_command = NULL;
--		prepare_namespace();
-+		if (root_delay) {
-+            printk(KERN_INFO "Waiting %desc before mounting root device...\n", 
-+                root_delay);
-+            ssleep(root_delay);
-+        }
-+        while (driver_probe_done() != 0)
-+            msleep(100);
-+        md_run_setup();
-+        do_initcalls(__root_initcall_start, __root_initcall_end);
-+        prepare_namespace();
- 	}
- 
- 	/*