add WRT300N v1.1 support (patch from #6379)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18921 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 40 insertions, 3 deletions

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 89af0f7fc..0b59ab12c 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -61,6 +61,7 @@ enum {
 	WRTSL54GS,
 	WRT54G3G,
 	WRT160N,
+	WRT300NV11,
 	WRT350N,
 	WRT600N,
 	WRT600NV11,
@@ -255,6 +256,19 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
 		},
 	},
+	[WRT300NV11] = {
+		.name           = "Linksys WRT300N V1.1",
+		.buttons        = {
+			{ .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
+			{ .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
+		},
+		.leds           = {
+			{ .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
+			{ .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
+			{ .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
+		},
+		.platform_init = bcm57xx_init,
+	},
 	[WRT350N] = {
 		.name		= "Linksys WRT350N",
 		.buttons	= {
@@ -886,6 +900,9 @@ static struct platform_t __init *platform_detect(void)
 	if (startswith(getvar("pmon_ver"), "CFE")) {
 		/* CFE based - newer hardware */
 		if (!strcmp(boardnum, "42")) { /* Linksys */
+			if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1"))
+				return &platforms[WRT300NV11];
+
 			if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
 				return &platforms[WRT350N];
 
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 638f664be..d63f17b12 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -164,8 +164,10 @@ start() {
 			c["lan_ifname"] = "eth0"
 			c["wan_ifname"] = "eth1"
 		}
-		if (nvram["boardtype"] == "0x478") {
-			# generic broadcom 4785 processor with 5397 switch?
+		# generic broadcom 4705/4785 processor with 5397 switch?
+		#  EXCEPT Linksys WRT300N V1.1
+		if ((nvram["boardtype"] == "0x478") && \
+		    (model != "Linksys WRT300N V1.1")) {
 			c["vlan0ports"] = "1 2 3 4 8*"
 			c["vlan1ports"] = "0 8"
 		}
diff --git a/target/linux/brcm-2.4/image/Makefile b/target/linux/brcm-2.4/image/Makefile
index 39570200a..3dad1cee7 100644
--- a/target/linux/brcm-2.4/image/Makefile
+++ b/target/linux/brcm-2.4/image/Makefile
@@ -68,7 +68,8 @@ define Image/Build/jffs2-64k
 	$(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
-	$(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
 	$(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
diff --git a/target/linux/brcm-2.4/profiles/WRT300Nv11.mk b/target/linux/brcm-2.4/profiles/WRT300Nv11.mk
new file mode 100644
index 000000000..dddcd1424
--- /dev/null
+++ b/target/linux/brcm-2.4/profiles/WRT300Nv11.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WRT300Nv11
+  NAME:=Linksys WRT300N v1.1
+  PACKAGES:=kmod-brcm-wl-mimo wlc nas kmod-wlcompat kmod-brcm-57xx
+endef
+
+define Profile/WRT300Nv11/Description
+	Package set optimized for the WRT300N v1.1
+endef
+$(eval $(call Profile,WRT300Nv11))
+