rtl819xx/tools, branch master

firmware-utils/mkcameofw: allow to use combined kernel image

2013-05-08T17:11:08+00:00

Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36583 3c298f89-4303-0410-b956-a3cf2f4a3e73

tools/mkimage: unbreak non-linux build again

2013-05-06T10:30:29+00:00

Signed-off-by: Felix Fietkau 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36556 3c298f89-4303-0410-b956-a3cf2f4a3e73

[tools] mkimage: update to 2013.04

2013-05-05T20:11:04+00:00

Signed-off-by: Luka Perkov 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36550 3c298f89-4303-0410-b956-a3cf2f4a3e73

tools/mtools: disable iconv support, it breaks on some systems

2013-05-02T12:39:31+00:00

Signed-off-by: Felix Fietkau 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36516 3c298f89-4303-0410-b956-a3cf2f4a3e73

firmware-utils/mktplinkfw: add description for -W option into usage output

2013-04-30T10:44:10+00:00

Add description for -W  option into usage output of mktplinkfw.

Signed-off-by: yousong 
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36497 3c298f89-4303-0410-b956-a3cf2f4a3e73

firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board

2013-04-26T17:00:47+00:00

Signed-off-by: yousong 
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36455 3c298f89-4303-0410-b956-a3cf2f4a3e73

[ramips] Add Netgear WNCE2001 (OF version)

2013-04-09T14:19:33+00:00

Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73

tools/upx: use HOSTCXX to fix build errors on mac os x

2013-03-22T12:52:21+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36110 3c298f89-4303-0410-b956-a3cf2f4a3e73

firmware-utils/mktplinkfw: Add support for MR3420v2

2013-03-11T15:55:23+00:00

Patch-by: Dmytro 
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35963 3c298f89-4303-0410-b956-a3cf2f4a3e73

mkimage: unbreak build on non-linux systems

2013-03-09T19:00:39+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35909 3c298f89-4303-0410-b956-a3cf2f4a3e73