rtl819xx/target/linux/ramips/rt305x, branch realtek-unstable

kernel: move CONFIG_MIPS_SEAD3 to generic

2013-05-12T21:41:55+00:00

Signed-off-by: Jonas Gorski 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: drop 3.7 support

2013-05-07T10:58:44+00:00

Signed-off-by; John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: properly setup the FEATURES variable

2013-05-07T10:58:30+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: enable dsp extensions for rt305x and rt3883

2013-05-06T16:45:59+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: Update ARC Freestation profile

2013-05-06T16:45:35+00:00

These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: move dlink profile to correct sub folder - 2nd try

2013-04-30T10:34:20+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: move dlink profile to correct sub folder

2013-04-30T08:24:26+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: introduce DTS for ALL5003

2013-04-25T19:03:01+00:00

Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle 
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: Add Alpha ASL-26555 support.

2013-04-25T19:02:53+00:00

This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito 
Signed-off-by: Álvaro Fernández Rojas 
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73

[ramips] fix ALL5002 default package selection

2013-04-03T10:00:16+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73