rtl819xx/target/linux/ramips/files/arch/mips/include/asm/mach-ralink, branch master

[ramips] move files to files-3.7

2013-04-03T09:58:44+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36161 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: add kernel support for the Upvel UR-326N4G board

2013-03-11T21:02:40+00:00

[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев 
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35970 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: rt3883: add kernel support for the Omnima EMB HPM board

2013-02-02T17:21:01+00:00

Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35466 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: add kernel support for the Edimax BR-6425 board

2013-02-02T17:01:47+00:00

Signed-off-by: Yuval Adam 
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35462 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: add kernel support for the Tenda 3G300M

2013-01-19T17:05:03+00:00

Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz 
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35244 3c298f89-4303-0410-b956-a3cf2f4a3e73

[ramips] adds support for Edimax BR-6524N

2013-01-06T11:11:42+00:00

fixes #12754

Signed-off-by: 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35020 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router

2012-12-29T17:50:35+00:00

This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić 
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34925 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: rt305x: add kernel support for AirLive AIR3GII

2012-12-29T17:50:28+00:00

AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz 
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34922 3c298f89-4303-0410-b956-a3cf2f4a3e73

ramips: convert to use {e,o}hci-platform driver

2012-12-22T12:11:08+00:00

Signed-off-by: Gabor Juhos 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34843 3c298f89-4303-0410-b956-a3cf2f4a3e73

[ramips] add support for Hauppauge Broadway

2012-12-10T14:13:01+00:00

This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34595 3c298f89-4303-0410-b956-a3cf2f4a3e73