rtl819xx/target/linux/lantiq/image, branch master

lantiq: move dts files to thir own folder

2013-04-25T19:03:32+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73

lantiq: make lzma-loader based images for VG3503J

2013-04-25T19:03:21+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36440 3c298f89-4303-0410-b956-a3cf2f4a3e73

lantiq: update VG3503J.dts to match new partition layout

2013-04-25T19:03:17+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36439 3c298f89-4303-0410-b956-a3cf2f4a3e73

lantiq: add lzma-loader source

2013-04-25T19:03:13+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36438 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] add VG3503J support

2013-04-11T19:18:07+00:00

this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36315 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for now

2013-03-14T18:43:54+00:00

EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] fix buttons on vr9 eval kit

2013-03-14T18:43:49+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] fix fritzbox 3370 partitions/memory/cmdline

2013-03-14T18:43:39+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] build jffs images for nand based fritzbox

2013-03-14T18:43:34+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73

[lantiq] fixes NO_XIP on CFI0001 flash

2013-03-12T13:53:08+00:00

This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73