rtl819xx/package/mac80211/files, branch master

mac80211: add mesh_param support

2013-05-15T09:36:10+00:00

This patch add mesh_param support in mac80211.sh
It suppose that this patch http://patchwork.openwrt.org/patch/3540/ is applied (add HT support for mesh)

Tested with rspro(ar9280)/wr1043nd, BB r36211
see also this http://lists.open80211s.org/pipermail/devel/2012-June/003352.html
(mesh_hwmp_rootmode 1 & mesh_gate_announcements 1
=> mesh_hwmp_rootmode 4 & mesh_gate_announcements 1)

Signed-off-by: Etienne CHAMPETIER 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36640 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: add HT support for mesh

2013-05-15T09:36:02+00:00

This is a quick patch to enable HT for mesh mode
https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput
http://lists.open80211s.org/pipermail/devel/2012-March/002990.html

For my test setup the speed increased from 1-2 Mbytes/sec to 8-10 Mbytes/sec (iperf)

Signed-off-by: Etienne CHAMPETIER 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36639 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: use the original mac address for the first virtual interface

2013-04-23T16:32:24+00:00

Signed-off-by: Felix Fietkau 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36408 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: rework mac address allocation

2013-04-17T15:36:57+00:00

If the first byte is available in the address mask, use only that one -
set the local bit and xor it with the id << 2. This ensures that there
are no hardware BSSID & BSSID-mask conflicts with devices that have
almost the same MAC address with just a small offset. The MAC address
conflict has been observed in a deployment with some devices from the
same batch when running with multiple interfaces.

If only some bits of the last byte are available, xor the id onto the
last MAC address byte (relevant mostly for Ralink devices).

In other cases (should not happen at this point), use the previous MAC
address offset calculation but without the local bit.

Signed-off-by: Felix Fietkau 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36353 3c298f89-4303-0410-b956-a3cf2f4a3e73

[mac80211] fixes mbssid on ralink hardware

2013-03-12T13:52:20+00:00

Signed-off-by: John Crispin 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35986 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211/hostapd: short_preamble is a per-vif option and should be enabled by default

2013-02-11T18:59:10+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35565 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: apply network interface configuration for adhoc + wpa2

2013-01-07T21:12:33+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35049 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211, hostapd: Fix macfilter for multi bssid setups

2012-12-04T12:06:40+00:00

Previously only the first macfilter configuration would have been used
on all interfaces. However, the configuration was always done per vif
already. Hence, move the macfilter setup into hostapd.sh where and
create one mac list file per vif.

Signed-off-by: Helmut Schaa 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34470 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: fix typo that broke specifying the phy name directly (deprecated)

2012-10-18T11:42:42+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33853 3c298f89-4303-0410-b956-a3cf2f4a3e73

mac80211: store the device path as identifier in the config instead of the mac address, makes it more robust against card replacement or user errors

2012-10-18T00:09:55+00:00

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33834 3c298f89-4303-0410-b956-a3cf2f4a3e73